Intuition Check
O aplicație simplă, care vă respectă intimitatea, pentru a vă testa și a vă antrena intuiția, pe iPhone, iPad și computerele Mac cu cip Apple. Exersați‑vă instinctul cu cărți de joc, numere sau imagini – individual sau cu un partener din apropiere.
Descărcați din App Store → Seturi proprii create cu AI →Intuiția
Ce este intuiția
Intuiția înseamnă să știți ceva fără să puteți spune de unde știți: o bănuială, o senzație instinctivă, o certitudine bruscă.
Psihologii descriu bine un anumit tip de intuiție – experiența care lucrează mai repede decât gândirea. Cine a făcut un lucru de multe ori observă un tipar înainte de a‑l putea exprima în cuvinte: mai întâi vine senzația, iar cuvintele vin mai târziu.1
Mulți oameni descriu și un al doilea tip: atunci când știu ceva ce nicio experiență nu le‑ar fi putut spune – cine sună înainte ca telefonul să afișeze un nume sau ce carte de joc stă cu fața în jos. În știință se dezbate dacă acest tip există.23 Aplicația vă permite să testați tocmai acest al doilea tip, cu valori alese la întâmplare.
Cum se poate face simțită
Mulți oameni cunosc momente ca acestea:
- Vă gândiți la cineva și, o clipă mai târziu, vă sună.
- Luați telefonul ca să sunați un prieten, iar telefonul începe să sune în mâna dvs. – este chiar prietenul acela.
- Vă treziți cu vreo două minute înainte să sune alarma.
- Știți cine sună înainte să vă uitați la ecran.
- Vă amintiți de cineva pe care nu l‑ați mai văzut de mult și vă sună chiar în aceeași zi.
- Prima dvs. impresie despre cineva se dovedește corectă.
- Soluția unei probleme vine de la sine – dimineața, la duș, la plimbare.
- Simțiți că vă privește cineva, vă întoarceți – și chiar vă privește cineva.
În sondaje telefonice făcute în Anglia și în California cu persoane alese la întâmplare, între 65 % și 78 % au spus că au sunat pe cineva care le‑a spus că tocmai se pregătea să le sune, iar 47–49 % au spus că au știut cine sună fără niciun indiciu.45 Majoritatea adulților cred că pot simți când îi privește cineva pe care nu‑l pot vedea.6
Unele dintre aceste situații au o explicație cunoscută. Corpul poate ține cont de ora la care vă așteptați să vă treziți: într‑un experiment, nivelul unui hormon care pregătește corpul pentru trezire a început să crească cu aproximativ o oră înainte de ora la care li se spusese participanților că vor fi treziți.7 O pauză poate ajuta la rezolvarea unei probleme: în multe experimente, oamenii au rezolvat problemele mai bine după ce le‑au lăsat deoparte o vreme,8 iar într‑un studiu, o noapte de somn a mărit de peste două ori proporția celor care au descoperit o regulă ascunsă datorită căreia sarcina se rezolva mai repede.9 Iar o primă impresie poate fi corectă: niște necunoscuți care au privit un profesor în total 30 de secunde, fără sunet, l‑au evaluat în mare măsură la fel ca studenții acestuia la sfârșitul semestrului.10
O dată, de două ori – sau iar și iar
O dată sau de două ori, o asemenea coincidență este ușor de pus pe seama hazardului. Când se întâmplă iar și iar, este firesc să vă întrebați dacă este vorba de mai mult decât atât.
Aici, memoria ține prost socoteala. Ea reține momentele în care a sunat telefonul și uită numeroasele ocazii în care v‑ați gândit la cineva și nu s‑a întâmplat nimic. Iar cu destule zile, oameni și gânduri, este inevitabil ca din când în când să apară coincidențe uimitoare.11
De aceea este util să numărați. În această aplicație se știe exact cât de des ați ghici corect răspunzând la întâmplare: asta depinde doar de câte valori pot fi extrase. Statisticile arată dacă rezultatele dvs. rămân în limitele a ceea ce ar da hazardul sau se abat de la acestea – vedeți Cum citiți rezultatele.
Intuiția în viața de zi cu zi
Sentimentele și semnalele corpului participă la multe decizii. Oamenii care și‑au ales pur și simplu posterul care le plăcea erau, după trei săptămâni, mai mulțumiți de el decât cei cărora li se ceruse mai întâi să‑și enumere motivele pentru care le plăcea sau nu le plăcea fiecare poster.12 Într‑un alt experiment, participanții au jucat un joc de cărți cu patru pachete: două pachete aduceau câștig cu trecerea timpului, iar două – pierdere, dar jucătorilor nu li s‑a spus care anume. Corpul reacționa înainte de fiecare alegere, iar la oameni diferiți aceste semnale înclinau în direcții diferite: în ansamblu, la unii spre pachetele câștigătoare, la alții spre cele pierzătoare. Cercetătorii au apreciat cât de bine simțea fiecare persoană semnalele propriului corp după cât de precis își putea simți bătăile inimii. Cu cât această senzație era mai precisă, cu atât alegerile persoanei urmau mai îndeaproape semnalele corpului – în bine sau în rău.13
Intuiția este cea mai de încredere acolo unde există tipare reale pe care vă puteți baza și un feedback rapid și clar. Un sentiment puternic de certitudine nu este, în sine, un semn că aveți dreptate.1
Așadar, a avea o legătură bună cu propria intuiție înseamnă două lucruri: s‑o observați și să învățați când vă puteți încrede în ea. Ca să aflați când vă puteți încrede în ea, notați‑vă starea în timp ce jucați: statisticile vă compară apoi rundele după stare și după ora din zi, așa că puteți vedea când vă descurcați mai bine. Vedeți Starea dvs.
Este mai mult decât atât?
Știința nu a lămurit dacă oamenii pot ști ceea ce nicio experiență nu le‑ar fi putut spune. În 2018, un articol de sinteză publicat în principala revistă a Asociației Americane de Psihologie a ajuns la concluzia că dovezile pentru astfel de fenomene sunt aproximativ la fel de puternice ca cele pentru rezultatele acceptate în psihologie.2 Un răspuns publicat în aceeași revistă a susținut că astfel de fenomene sunt imposibile și că rezultatele trebuie să aibă alte cauze.3 Întrebarea rămâne deschisă, iar aplicația vă permite s‑o cercetați pe baza propriilor runde.
Cum funcționează aplicația
O rundă
Alegeți un set de ghicit – cărți de joc, numere sau un set de imagini – și încercați să simțiți o valoare înainte să fie afișată. Apoi dezvăluiți‑o și vedeți dacă ați avut dreptate. Aplicația vă numără reușitele și le compară cu ceea ce ar da doar hazardul.
Modurile pasiv și activ
Aplicația are două moduri:
- Intuiție pasivă – valoarea este deja aleasă și ascunsă. Încercați să simțiți care este.
- Intuiție activă – nimic nu este ales până când nu dezvăluiți valoarea. Încercați să faceți, prin forța voinței, să iasă valoarea pe care v‑o doriți.
Statisticile numără separat cele două moduri, ca să puteți vedea care dintre ele vi se potrivește mai bine.
Trei feluri de a juca
Cu comutatoarele din partea de sus a vizualizării principale alegeți stilul de joc și modul. Aceleași opțiuni se găsesc în Configurări → Stil de joc și mod.
Unul câte unul
Câte o valoare, pe rând. Apăsați pentru a o dezvălui, apăsați din nou pentru a o ascunde, apoi dezvăluiți‑o pe următoarea. Cu opțiunea „Dezvăluire fără ascundere” activată în Configurări → Unul câte unul, fiecare apăsare afișează imediat următoarea valoare. Opțiunea „Afișare explicații” adaugă sub valoare un rând cu o explicație.
Când opțiunea „Metodă” din secțiunea „Înregistrarea răspunsurilor” are valoarea „Introducere răspuns” (așa cum este la început), la fiecare dezvăluire vi se cere mai întâi răspunsul, iar aplicația stabilește singură rezultatul rundei. Vedeți Ce se înregistrează.
Alegere rapidă
Toate valorile setului sunt așezate într‑o singură grilă. Fiecare apăsare este o rundă separată. În modul activ, valoarea este extrasă în momentul în care apăsați; în modul pasiv, este extrasă dinainte, imediat după apăsarea anterioară. O reușită poate fi semnalată printr‑o clipire verde și o vibrație.
Seturile de numere cu peste 1.000 de valori nu au grilă: restrângeți intervalul în configurările setului sau jucați în stilul de joc „Unul câte unul”.
Serie
În modul activ, alegeți valoarea dorită, doriți‑v‑o și apăsați pe ea: aplicația extrage o serie de valori și numără câte dintre ele coincid cu cea pe care ați apăsat. O serie poate avea de la 2 la 12 extrageri sau 100, 1.000, 10.000, 100.000, 1 milion sau 10 milioane. Lungimea o stabiliți în vizualizarea principală. În Configurări → Serie, glisorul „Durata seriei” distribuie extragerile pe parcursul a cel mult 10 secunde; la zero nu există pauze. Fiecare serie intră în statistici ca o singură înregistrare.
Când alegeți stilul de joc „Serie”, modul trece la intuiția activă.
Cărți de joc și numere
Un set de cărți de joc folosește un pachet de 36 sau 52 de cărți, cu sau fără jokeri. Un set de numere folosește numere de până la 9 cifre – numărul maxim de cifre îl alegeți dvs. Pe ambele le modificați în vizualizarea configurărilor setului de ghicit: în vizualizarea principală, apăsați pe roata dințată de lângă comutatorul de seturi.
Vedere liberă
Țineți apăsat oriunde în vizualizarea principală pentru a ascunde comutatoarele, bara de instrumente, bara stărilor și explicația. Țineți apăsat din nou pentru a le readuce. Contoarele de runde și rezultatul rămân vizibile.
În Configurări → Aspect și feedback, în secțiunea „Vedere liberă”, opțiunea „Afișare buton” adaugă în bara de instrumente un buton cu ochi (apăsați pe el pentru a activa vederea liberă), iar opțiunea „Memorare vedere liberă” păstrează vederea liberă activată de la o pornire a aplicației la alta.
Contoare de runde
Vizualizarea principală poate arăta câte runde ați jucat și cum vă descurcați: câte un contor și un rezultat pentru fiecare combinație de mod și stil de joc, cu un buton care resetează contorul și degajează rezultatul. Trecerea la alt set de ghicit resetează, de asemenea, toate contoarele și rezultatele.
Pentru a păstra contoarele de runde și rezultatele de la o pornire a aplicației la alta, activați opțiunea „Salvare contoare de runde și rezultate” în Configurări → Statistici. Este disponibilă cât timp este activată opțiunea „Salvare statistici pe dispozitiv”.
Seturi de ghicit
Un set de ghicit este ceea ce folosiți ca să ghiciți: cărți de joc, numere sau un set de imagini. La început, vizualizarea principală arată doar seturile „Numere” și „Cărți de joc”. Celelalte seturi care vin cu aplicația le puteți adăuga apăsând pe de lângă comutatorul de seturi din vizualizarea principală.
Comutatorul de seturi
Comutatorul din partea de sus a vizualizării principale arată seturile dvs. de ghicit. Cu valoarea implicită a opțiunii „Stilul comutatorului”, comutatorul afișează butoane dacă are de arătat unul sau două seturi, iar de la trei în sus, numele setului curent, care deschide o listă a seturilor. Când în opțiunea „Stilul comutatorului” este aleasă valoarea „Vizualizare separată”, comutatorul deschide întotdeauna această listă.
Fiecare set are propriul comutator „Utilizare”. Un set cu acest comutator dezactivat nu este oferit nicăieri (nici în comutatorul de seturi din vizualizarea principală, nici în jocul cu partener, nici în statistici), dar rămâne în lista dvs. de seturi din Configurări → Seturi de ghicit → Gestionați seturile de ghicit, iar dacă îl activați din nou, îi revin și statisticile.
Butonul de lângă comutatorul de seturi deschide vizualizarea „Adăugare set”. Aceasta arată seturile suplimentare care vin cu aplicația, gata de adăugat în vizualizarea principală; sub ele se află un buton pentru crearea unui set gol, în care vă puteți adăuga ulterior propriile imagini, și secțiunea „Asistentul dvs. AI”, pentru adăugarea unui set creat de un asistent AI. Butonul cu roată dințată de lângă comutatorul de seturi deschide configurările setului selectat. Ambele butoane pot fi ascunse în Configurări → Seturi de ghicit cu opțiunile „Afișare buton adăugare set” și „Afișare buton configurări set”.
Seturi predefinite
Apăsați pe de lângă comutatorul de seturi din vizualizarea principală – sau deschideți Configurări → Seturi de ghicit → Gestionați seturile de ghicit, apăsați pe și alegeți „Seturi predefinite”. Deschideți un set și apăsați pe „Adăugați la seturile mele de ghicit”.
Setul pe care îl adăugați este propria dvs. copie: îl puteți redenumi, puteți schimba ordinea imaginilor, puteți scoate unele dintre ele din joc, îl puteți folosi în jocul cu partener sau îl puteți trimite cuiva.
Un set din propriile imagini
Din vizualizarea principală: apăsați pe de lângă comutator, apoi pe „Set de imagini gol”, sub seturile predefinite. Păstrați numele „Imaginile mele” sau introduceți altul și apăsați pe „Creați”. Aplicația trece la noul set și îl deschide.
Sau deschideți Configurări → Seturi de ghicit → Gestionați seturile de ghicit, apăsați pe și alegeți „Set de imagini gol”, apoi dați un nume setului și apăsați pe „Creați”. Noul set se deschide.
În vizualizarea setului, apăsați pe și adăugați imagini din „Poze” sau din „Fișiere” (mai multe deodată), faceți fotografii una câte una cu opțiunea „Cameră” sau lipiți cu opțiunea „Lipiți din clipboard” o imagine sau un cod SVG copiat.
Numele imaginilor
Apăsați pe o imagine în vizualizarea setului pentru a o vedea mai mare. Numele ei este câmpul „Nume” de sub ea: introduceți unul, modificați‑l sau ștergeți‑l. O imagine adăugată din „Fișiere” primește la început numele fișierului, fără extensie; una adăugată din „Poze”, de la „Cameră” sau cu opțiunea „Lipiți din clipboard” nu primește la început niciun nume. Într‑un set cu nume în mai multe limbi, rândul „Nume pe limbi” de sub câmp conține numele imaginii în fiecare dintre ele. Sub imagine vedeți formatul și dimensiunea fișierului pe care îl păstrează aplicația.
Un asistent AI vă poate crea imagini și seturi întregi: Seturi proprii create cu AI.
Ordinea, așezarea și ce intră în joc
În vizualizarea proprie a setului, butonul „Aranjați” vă permite să schimbați ordinea imaginilor trăgându‑le și să alegeți pentru grilă opțiunile „Imagini pe un rând”, „Aliniere” și „Afișare grilă întreagă”.
Țineți apăsat pe o imagine pentru mai multe opțiuni:
- Opțiunea „Nu folosiți în joc” păstrează imaginea în set, dar aceasta nu este extrasă niciodată. Opțiunea „Folosiți în joc” o readuce în joc.
- Opțiunea Marcați ca substituent „?” afișează acea imagine cât timp o valoare este încă ascunsă în stilul de joc „Unul câte unul”. Imaginea însăși nu este extrasă niciodată. Un set poate avea un singur substituent „?”.
Redenumirea și ștergerea
Numele este primul câmp din vizualizarea setului. La seturile predefinite, dacă îl editați, se schimbă numele în limba curentă a aplicației; numele în celelalte limbi se găsesc în secțiunea „Nume pe limbi”.
Pentru a șterge un set, glisați‑l în lista dvs. de seturi din Configurări → Seturi de ghicit → Gestionați seturile de ghicit sau țineți apăsat pe el, apoi alegeți „Ștergeți”. Aplicația vă întreabă mai întâi. Statisticile setului sunt șterse odată cu el.
Trimiterea seturilor
Trimiteți un set
Un set din propriile imagini poate fi trimis ca un singur fișier, cu extensia .guesset. Fișierul conține imaginile, ordinea lor, așezarea și numele setului, precum și ce imagini sunt în joc și care dintre ele este substituentul „?”. Seturile „Cărți de joc” și „Numere” sunt incluse în aplicație și nu pot fi trimise.
- Deschideți Configurări → Seturi de ghicit → Gestionați seturile de ghicit.
- Țineți apăsat pe set și alegeți „Exportați…”. Butonul de partajare din vizualizarea setului face același lucru.
- Alegeți cum să‑l trimiteți: Mail, Mesaje, AirDrop, Fișiere sau altă aplicație.
Pentru a juca cu un set împreună cu cineva din apropiere, nu aveți nevoie de fișier: vedeți Jocul cu propriile imagini.
Deschideți un set pe care vi l‑a trimis cineva
Apăsați pe un fișier .guesset în aplicațiile Mail, Mesaje sau Fișiere ori acceptați unul trimis prin AirDrop și deschideți‑l cu Intuition Check. Setul devine o copie separată, care vă aparține, și apare la sfârșitul listei dvs. și în comutator.
Un fișier deja salvat pe dispozitiv poate fi importat și din aplicație: în Configurări → Seturi de ghicit → Gestionați seturile de ghicit, apăsați pe și alegeți „Importați din fișier”.
Joc cu partener
Cum funcționează
Două dispozitive joacă împreună: o persoană alege o valoare, cealaltă încearcă s‑o ghicească. Dispozitivele comunică doar între ele (de la dispozitiv la dispozitiv, când sunt aproape unul de altul, sau printr‑o rețea Wi‑Fi comună). Rundele din jocul cu partener nu intră în statistici.
Conexiunea
Activați Wi‑Fi pe ambele dispozitive. În aceeași rețea Wi‑Fi, conexiunea funcționează cel mai bine, iar dispozitivele pot fi atunci oriunde în acea rețea. Fără o rețea comună, ele se conectează de la dispozitiv la dispozitiv – țineți‑le aproape unul de altul.
Dispozitivele se caută unul pe altul doar cât timp jocul cu partener este deschis pe ambele.
Cum începeți
- Pe ambele dispozitive, deschideți jocul cu partener: apăsați pe butonul cu două persoane din bara de instrumente a vizualizării principale sau apăsați pe „Deschideți jocul cu partener” în Configurări → Joc cu partener. Dacă butonul nu apare, activați opțiunea „Afișare buton joc cu partener” în Configurări → Joc cu partener.
- Fiecare dispozitiv afișează „Căutare partener în apropiere…”, apoi afișează celălalt dispozitiv sub „Găsite în apropiere:”. Dispozitivele se conectează singure.
Prima dată, dispozitivul vă întreabă dacă aplicația are voie să găsească dispozitive în rețeaua dvs. locală. Permiteți acest lucru: fără această permisiune, dispozitivele nu se pot găsi unul pe altul.
O rundă
- Sub „Jucați cu:”, alegeți cu ce jucați – oricare dintre seturile de ghicit pe care le utilizați.
- Alegeți un rol: „Aleg o carte” (sau un număr, sau o imagine) ori „Încerc să ghicesc”. Partenerul primește celălalt rol.
- Cel care alege stabilește o valoare, iar cel care ghicește dă un răspuns. Apoi ambele dispozitive afișează valoarea aleasă și răspunsul dat, cu „Corect!” sau „Nu de data aceasta”.
- Butonul „Jucați din nou” readuce ambele dispozitive la primul pas, unde alegeți cu ce jucați și rolurile pentru runda următoare.
Jocul cu propriile imagini
Când jucați cu unul dintre seturile dvs. de imagini, partenerului i se cere mai întâi să‑l descarce, apăsând pe „Descărcați”, cu excepția cazului în care are deja același set. Copia primită de partener este folosită doar în jocul cu partener și nu îi modifică niciodată propriile seturi. Se trimit doar imaginile pe care partenerul nu le are deja.
Dacă opțiunea „Păstrare seturi de imagini primite” din Configurări → Joc cu partener este activată, următorul joc cu același partener începe fără așteptare. Dacă este dezactivată, seturile primite sunt șterse când ieșiți din jocul cu partener. Seturile primite apar în Configurări → Seturi de ghicit → Gestionați seturile de ghicit, în secțiunea „Primit de la partener”, unde butonul „Adăugați la seturile mele de ghicit” face o copie care vă aparține în întregime.
Numele partenerului
Pe iPhone și iPad, aplicațiile văd doar un nume generic de dispozitiv, cum ar fi „iPhone”, așa că două dispozitive pot arăta la fel. După conectare, apăsați pe creionul de lângă numele partenerului și introduceți un nume ales de dvs. Acesta este afișat doar pe dispozitivul dvs.
Dacă dispozitivele nu se găsesc unul pe altul
- Deschideți jocul cu partener pe ambele dispozitive, cu Wi‑Fi activat.
- Conectați ambele dispozitive la aceeași rețea Wi‑Fi dacă puteți; altfel, țineți‑le aproape unul de altul.
- Rețelele pentru invitați și cele publice – din hoteluri, cafenele, birouri – blochează adesea traficul dintre dispozitive. Încercați o altă rețea sau jucați fără nicio rețea, cu dispozitivele unul lângă altul.
- Dacă ați refuzat solicitarea de acces la rețeaua locală, reactivați accesul în aplicația Configurări: Intimitate și securitate → Rețea locală, apoi activați Intuition Check.
- Dacă un dispozitiv apare sub „Găsite în apropiere:”, dar nu se conectează niciodată, ieșiți din jocul cu partener pe ambele dispozitive și deschideți‑l din nou: căutarea pornește de la zero.
- Joacă împreună doar câte două dispozitive. Un al treilea dispozitiv caută în continuare până când unul dintre cele două iese din jocul cu partener.
Statistici
Ce se înregistrează
Stilurile de joc „Alegere rapidă” și „Serie” vă înregistrează întotdeauna rundele. Stilul de joc „Unul câte unul” le înregistrează în funcție de opțiunea „Metodă” din secțiunea „Înregistrarea răspunsurilor”, în Configurări → Unul câte unul:
- „Introducere răspuns” – opțiunea implicită. Alegeți răspunsul înainte de dezvăluire, iar aplicația stabilește rezultatul rundei.
- „Marcare manuală” – după fiecare dezvăluire, apăsați pe ✓ sau ✗. O dezvăluire pe care o săriți fără marcare nu este luată în calcul.
- „Dezactivat” – stilul de joc „Unul câte unul” nu înregistrează nimic.
Un set de ghicit cu o singură valoare posibilă nu înregistrează nimic. Rundele din jocul cu partener nu se înregistrează niciodată.
Consultarea statisticilor
Apăsați pe butonul de statistici din bara de instrumente a vizualizării principale sau apăsați pe „Afișați statisticile” în Configurări → Statistici. Statisticile se deschid pentru setul de ghicit, stilul de joc și modul pe care le folosiți acum. Filtrele din partea de sus le restrâng după „Perioadă”, „Set de ghicit”, „Stil de joc”, „Mod” și – cât timp vă notați starea – „Stare”.
Secțiunile de care nu aveți nevoie pot fi dezactivate în vizualizarea configurărilor statisticilor – o deschideți cu butonul de configurări din vizualizarea statisticilor sau, din vizualizarea principală, prin Configurări → Statistici.
Ce înseamnă cifrele: Cum citiți rezultatele.
Păstrarea statisticilor
La început, statisticile sunt păstrate doar în memorie, pentru sesiunea curentă: sunt degajate când aplicația se închide, inclusiv când iOS o închide în fundal. Pentru a le păstra, activați opțiunea „Salvare statistici pe dispozitiv” – în partea de sus a vizualizării statisticilor sau în Configurări → Statistici. Se salvează și rundele din sesiunea curentă. Rundele din sesiunile anterioare ale aplicației care nu au fost salvate niciodată nu mai pot fi recuperate.
Dezactivarea comutatorului șterge statisticile salvate. Aplicația întreabă mai întâi, cu „Opriți salvarea statisticilor?”; după ce apăsați pe „Ștergeți statisticile salvate”, rămân doar rundele jucate de la ultima deschidere a aplicației, iar acestea doar în memorie: dispar când aplicația se închide. Această acțiune nu poate fi anulată.
Degajarea statisticilor
În partea de jos a vizualizării statisticilor:
- Degajați toate statisticile setului „…” – toate statisticile înregistrate cu setul de ghicit ales în filtru.
- Ștergeți înregistrările filtrate (număr: …) – doar înregistrările pe care le afișează filtrele.
- Degajați toate statisticile – totul.
Aplicația vă cere să confirmați fiecare dintre aceste ștergeri și niciuna nu poate fi anulată.
Exportare
Apăsați pe butonul de partajare din bara de instrumente a vizualizării statisticilor, apoi pe „Exportați statisticile într‑un fișier text”. Fișierul este un tabel (CSV) care conține exact înregistrările afișate de filtrele dvs.: câte un rând pentru fiecare rundă sau, în stilul de joc „Serie”, câte unul pentru fiecare serie. Aplicațiile pentru foi de calcul, precum Numbers, îl pot deschide. V‑ar putea fi util să arătați acest fișier asistentului dvs. AI și să‑l întrebați, de exemplu: „În ce împrejurări intuiția mea pare să funcționeze mai bine sau mai rău?”
Cum citiți rezultatele
Statisticile nu numără doar reușitele. Ele vă compară rezultatele cu ceea ce ar obține ghicitul la întâmplare cu același număr de valori posibile și vă spun pe înțeles dacă sunteți peste nivelul hazardului, sub el sau în limitele lui.
Rezultatul dvs. și hazardul
În secțiunea „Răspunsuri corecte”, rândul „Rezultatul dvs.” apare lângă „Hazardul ar da”. Același rezultat de 30 % poate însemna lucruri opuse: cu 3 valori posibile, ghicitul la întâmplare obține aproximativ 33 %, deci 30 % este ușor sub nivelul hazardului; cu un pachet de 52 de cărți, obține aproximativ 2 %, deci 30 % este mult peste el. Cifra hazardului se calculează cu numărul de valori posibile al fiecărei runde în parte.
Interpretarea
Aplicația oferă o interpretare: de la „În limitele hazardului”, trecând prin ușor și net peste sau sub nivelul hazardului, până la „Mult peste nivelul hazardului” sau „Mult sub nivelul hazardului”. De asemenea, spune cât de rar ar da ghicitul la întâmplare un asemenea rezultat, de exemplu „în aproximativ 1 caz din 300”.
Când sunt puține runde, rezultatele oscilează mult doar din cauza hazardului. De aceea interpretarea devine tot mai stabilă cu fiecare rundă nouă.
Comparație între intuiția pasivă și cea activă
Când aveți runde în ambele moduri, secțiunea „Intuiția pasivă și cea activă” arată reușitele și rata de reușită pentru fiecare, ca să vedeți care vi se potrivește mai bine. Pentru stilul de joc „Serie”, secțiunea nu este afișată.
Cele mai bune șiruri
Secțiunea „Cele mai bune șiruri” enumeră cele mai lungi șiruri ale dvs. de răspunsuri corecte la rând, cu ziua, ora și starea pe care ați notat‑o. O pauză mai lungă decât cea din „Pauză max. între runde” – o alegeți chiar în această secțiune – întrerupe un șir, la fel ca o schimbare a stării notate.
În timp
Graficul „Rata de reușită pe zile” trasează rata dvs. de reușită pentru fiecare zi de îndată ce aveți runde în două zile diferite. Secțiunea „După ora din zi” arată separat dimineața, după‑amiaza, seara și noaptea.
Valori
Când statisticile sunt afișate pentru un singur set de ghicit cu cel mult 100 de valori, ele enumeră valorile pe care le‑ați ghicit corect cel mai des și valorile pe care le alegeți ca răspuns cel mai des și cel mai rar – inclusiv valorile pe care nu le alegeți niciodată, după ce ați dat atâtea răspunsuri câte valori are setul.
Oamenii înclină adesea spre unele valori și le evită pe altele, iar unele valori pot fi ghicite corect mai des decât altele.
Rezultatele se pot schimba
Rezultatele dvs. se pot schimba în funcție de stare și de împrejurări. Nimic din ce urmează nu este un fapt stabilit – sunt posibilități care merită observate în timp ce jucați:
- Starea dvs. Este posibil să aveți rezultate diferite imediat după trezire sau noaptea târziu, în momente de vigoare sau de oboseală, de calm sau de stres. Notați‑vă starea în timp ce jucați, iar statisticile vă compară rundele după stare și după ora din zi.
- Încrederea în sine. Încrederea în propriile forțe sau, dimpotrivă, îndoiala ar putea merge mână în mână cu rezultatele dvs.
- Și un rezultat sub nivelul hazardului contează. Dacă ghiciți corect vizibil mai rar decât ar prezice hazardul, este tot o abatere de la hazard. Un mod de a citi acest lucru este că, în acel moment, intuiția lucrează împotriva dvs. – nu că nu se întâmplă nimic.
- Valorile. Este posibil să ghiciți corect unele valori mult mai des decât altele, iar pe unele să nu le ghiciți corect niciodată, deși le alegeți la fel de des ca pe celelalte.
Ce pot spune cifrele
Aplicația vă poate spune dacă rezultatele dvs. se abat de la hazardul pur – niciodată de ce, nici chiar atunci când motivul pare evident din date. Tratați cifrele ca pe ceva de explorat, nu ca pe o măsură fixă a persoanei dvs. Vedeți și Intuiția.
Starea dvs.
Bara stărilor
Bara din vizualizarea principală vă permite să notați cum vă simțiți acum: „Vigoare” sau „Oboseală”, „Calm” sau „Stres”, „Încredere” sau „Îndoială”, „Atenție sporită” sau „Atenție dispersată”, dispoziția și împrejurări cum ar fi „Imediat după trezire”, „După cafea” sau „După sport”. Starea notată se înregistrează cu fiecare rundă pe care o jucați de atunci înainte, până când o schimbați sau până când este uitată.
Statisticile vă compară apoi rundele după stare și după ora din zi, iar fiecare șir arată starea pe care ați notat‑o. Vedeți secțiunea Rezultatele se pot schimba.
Când este uitată starea
Opțiunea „Resetare stare notată” din Configurări → Starea dvs. decide:
- „La pornirea aplicației” – opțiunea implicită. Aplicația pornește data următoare fără nicio stare notată.
- „După o pauză” – starea este uitată după o pauză de joc mai lungă decât cea aleasă la „Pauză”, de la 15 minute la 1 zi.
- „Niciodată” – starea rămâne până când o schimbați.
Propriile stări
În Configurări → Starea dvs. → Gestionați stările, puteți redenumi, reordona, adăuga și ascunde stări, puteți adăuga axe proprii și puteți dezactiva o axă cu propriul ei comutator „Utilizare”: o axă dezactivată dispare din bara stărilor, rundele noi nu o înregistrează, iar statisticile o lasă deoparte.
Pentru a elimina complet bara, dezactivați opțiunea „Notare stare în timpul rundelor”; atunci nu se înregistrează nicio stare.
Bara este ascunsă când vederea liberă este activată, precum și în stilul de joc „Unul câte unul” când înregistrarea răspunsurilor este dezactivată.
Aspect și funcționalități
Teme
În Configurări → Aspect și feedback există patru teme, fiecare cu o variantă luminoasă și una întunecată: „Nisip”, „Ocean”, „Pădure” și „Amurg”. Opțiunea „Aspect” oferă „Luminos”, „Întunecat” și „Sistem”; cu „Sistem”, aplicația urmează configurarea dispozitivului dvs. și se schimbă împreună cu ea. Tema colorează, de asemenea, cărțile de joc și majoritatea imaginilor din seturile predefinite.
Feedback
În secțiunea „Semnal la reușită”, comutatoarele „Vibrații” și „Animație” marchează un răspuns corect cu o vibrație și o clipire verde; oricare dintre ele poate fi dezactivat. Funcționează în stilul de joc „Alegere rapidă” la fiecare apăsare, în stilul „Serie” când toate extragerile unei serii sunt reușite și în stilul „Unul câte unul” când introduceți răspunsul înainte de dezvăluire. La un răspuns greșit nu se declanșează nici vibrația, nici clipirea. Vibrațiile necesită și opțiunea „Feedback haptic sistem” activată în aplicația Configurări, la „Sunete și feedback haptic”.
Opțiunea „Animație de puls la apăsare” face să pulseze scurt celula pe care o apăsați în stilurile de joc „Alegere rapidă” și „Serie”, precum și valoarea pe care o dezvăluiți în stilul „Unul câte unul” când marcați manual rundele sau nu le înregistrați.
O vizualizare principală aerisită
Aproape totul din vizualizarea principală poate fi ascuns. Fiecare comutator se află în vizualizarea din Configurări căreia îi aparține:
- Configurări → Stil de joc și mod: două comutatoare „Afișare comutator”, unul pentru stilul de joc și unul pentru mod.
- Configurări → Seturi de ghicit: Afișare comutator, Afișare buton adăugare set, Afișare buton configurări set.
- Configurări → Alegere rapidă: Afișare buton opțiuni grilă.
- Configurări → Unul câte unul: Afișare explicații.
- Configurări → Serie: Afișare lungime serie în vizualizarea principală, Afișare durată serie în vizualizarea principală, Afișare buton opțiuni grilă (același comutator ca în Configurări → Alegere rapidă).
- Configurări → Starea dvs.: Notare stare în timpul rundelor.
- Configurări → Statistici: Afișare buton statistici.
- Configurări → Joc cu partener: Afișare buton joc cu partener.
- În configurările fiecărui stil de joc („Alegere rapidă”, „Unul câte unul”, „Serie”): Afișare contor de runde, Afișare comutator „Rezultate”, Afișare rezultat.
Pentru a scoate un singur set de ghicit din comutator, dezactivați comutatorul „Utilizare” din configurările acelui set; setul dispare atunci și din jocul cu partener, și din statistici. Activarea vederii libere ascunde deodată majoritatea elementelor vizualizării principale.
Funcționalități
În Configurări → Funcționalități există un comutator pentru Stilul de joc „Serie” și unul pentru „Contoare de runde și rezultate în vizualizarea principală”. O funcționalitate dezactivată dispare din vizualizarea principală și din configurările aplicației.
Limbă
În Configurări → Limbă puteți stabili limba aplicației independent de limba dispozitivului; de limba aleasă depinde și modul în care se scriu numerele și datele. În secțiunea „Limbi sugerate”, lista afișează mai întâi limba sistemului, apoi fiecare dintre limbile dispozitivului oferite de aplicație, în ordinea stabilită pe dispozitiv; toate celelalte limbi urmează în secțiunea „Alte limbi”. Dacă noua limbă se citește în sens invers, după schimbare închideți aplicația și deschideți‑o din nou (direcția scrisului se schimbă corect doar după ce aplicația este deschisă din nou).
Sub rândul „Limbă” din configurările aplicației se află comutatorul „Afișare explicații în Configurări”; acesta afișează sau ascunde explicațiile de sub opțiuni.
Ora gratuită și abonamentul
Ora gratuită
Aplicația se descarcă gratuit și include o oră de timp în aplicație, ca să încercați tot ce conține. Ora se numără doar cât timp aplicația este deschisă pe ecran și se adună din toate sesiunile dvs. – când aplicația este închisă sau în fundal, timpul nu se numără.
Când ora s‑a terminat, vizualizarea abonamentului se deschide singură. Dacă timpul nu v‑a ajuns ca să vă hotărâți în privința abonamentului, puteți lua mai mult: butonul „Resetați ora gratuită” vă dă încă o oră, de cel mult 3 ori – 4 ore de timp gratuit în total.
Abonamentul
Pentru a folosi aplicația în continuare după aceea, există un abonament cu două planuri, „Lunar” și „Anual”. Abonamentul acceptă Partajarea familială.
Abonarea
Deschideți Configurări → Abonament → Abonați‑vă.
Gestionare sau anulare
Abonamentele sunt facturate de Apple. Configurări → Abonament → Gestionați abonamentul vă duce la abonamentul dvs. Abonamentul aplicației poate fi gestionat și în modul obișnuit, prin abonamentele contului dvs. Apple din configurările dispozitivului. Anularea unui abonament oprește reînnoirile automate viitoare, dar păstrați accesul până la încheierea perioadei curente.
Dacă aveți abonamentul lunar, puteți trece la abonamentul anual din Configurări → Abonament → Treceți la abonamentul anual.
Rambursări
Rambursările sunt gestionate de Apple: solicitați una la reportaproblem.apple.com. Nu avem acces la datele dvs. de plată și nu putem emite noi o rambursare – dar dacă ceva nu a mers bine, scrieți‑ne și nouă, pentru că doar așa aflăm despre asta.
Restaurarea unei achiziții
Pe un dispozitiv nou, deschideți Configurări → Abonament → Abonați‑vă și apăsați pe „Restaurați achizițiile”. Astfel recuperați și un abonament pe care un membru al familiei îl partajează cu dvs. Folosiți contul Apple cu care s‑a făcut abonarea sau un cont din același grup familial.
Datele dvs.
Pe scurt
Nu există conturi și nici servere. Aplicația nu trimite datele dvs. nici nouă, nici altei companii. Jocul cu partener schimbă date doar cu celălalt dispozitiv – prin rețeaua Wi‑Fi pe care o folosesc ambele dispozitive sau de la dispozitiv la dispozitiv, când sunt aproape unul de altul.
Unde sunt păstrate
Configurările, seturile de ghicit – inclusiv imaginile pe care le adăugați – și lista de stări sunt stocate pe dispozitivul dvs., în spațiul de stocare propriu al aplicației. Până când activați opțiunea „Salvare statistici pe dispozitiv”, statisticile sunt păstrate doar în memorie, cât timp aplicația rulează.
La fel ca datele oricărei alte aplicații, toate acestea ajung în backupurile dispozitivului dvs.
Aplicația nu conține instrumente de analiză și nici raportare a blocărilor.
Când ne scrieți
E‑mailurile pe care ni le trimiteți sunt corespondență obișnuită: le păstrăm doar cât este nevoie pentru a vă răspunde.
Toate detaliile sunt în Politica de confidențialitate.
Seturi proprii create cu AI
Puteți ruga un asistent AI, de exemplu un chatbot, să deseneze imagini pentru un set de ghicit sau să creeze un set întreg. Imaginile sunt desene SVG. O imagine SVG poate conține textele sale în mai multe limbi, iar aplicația le afișează atunci în limba setată pentru aplicație. O imagine poate prelua și culorile temei aplicației, atât în varianta luminoasă a temei, cât și în cea întunecată. Un set poate avea propriul substituent „?”: imaginea afișată cât timp valoarea este ascunsă. Asistentul are nevoie de descrierea formatelor; fiecare solicitare de mai jos conține adresa acestei descrieri.
Cum creați un set
- Copiați una dintre solicitările de mai jos în conversația cu asistentul și modificați‑o cum doriți: subiectul, numărul de imagini (de la 2 la 200), limbile.
- Dacă asistentul nu poate deschide pagini web, dați‑i și descrierea formatelor: în secțiunea Descrierea formatelor pentru AI apăsați pe „Copiați” și lipiți descrierea în aceeași conversație sau apăsați pe „Salvați” și atașați fișierul salvat.
- Asistentul răspunde cu setul într‑un singur bloc de cod, adesea cu câteva cuvinte de explicație înainte și după el. Copiați doar blocul de cod: în multe aplicații de chat, acesta are propriul buton de copiere.
- În aplicație, apăsați pe în vizualizarea principală, iar în vizualizarea „Adăugare set” apăsați pe „Lipiți din clipboard”. Dacă asistentul rulează pe alt dispozitiv, de exemplu pe un Mac, salvați acolo blocul de cod într‑un fișier al cărui nume se termină cu .json și apăsați în schimb pe „Importați din fișier”. Setul nou este adăugat și ales; apăsați pe „Începeți să ghiciți” pentru a trece la vizualizarea principală. Aceleași butoane se află și chiar sub acești pași.
Dacă apare o eroare, rugați asistentul s‑o corecteze.
Un set fără legende:
Creează pentru aplicația Intuition Check un set de ghicit numit „Animale”: 10 imagini SVG cu animale diferite, fără legende. Mai întâi citește descrierea formatelor și respectă‑o: https://intuition-check.com/llm-formats.txtUn set cu o legendă în fiecare imagine. Legenda nu se schimbă când schimbați limba aplicației:
Creează pentru aplicația Intuition Check un set de ghicit numit „Fructe”: 8 imagini SVG cu fructe diferite, fiecare cu o legendă sub desen: numele fructului. Mai întâi citește descrierea formatelor și respectă‑o: https://intuition-check.com/llm-formats.txtUn set cu nume în mai multe limbi. Fiecare legendă afișează numele imaginii în limba aplicației:
Creează pentru aplicația Intuition Check un set de ghicit multilingv numit „Planete”: 8 imagini SVG cu planetele, fiecare cu o legendă care afișează numele imaginii în limba aplicației. Dă numele în română, germană și hindi. Mai întâi citește descrierea formatelor și respectă‑o: https://intuition-check.com/llm-formats.txtUn set ale cărui imagini preiau culorile temei aplicației:
Creează pentru aplicația Intuition Check un set de ghicit numit „Vreme”: 8 imagini SVG – soare, nor, ploaie, zăpadă, furtună cu fulgere, vânt, ceață și curcubeu – fără legende. Culorile lor trebuie să se adapteze la tema aplicației, atât în varianta luminoasă, cât și în cea întunecată. Mai întâi citește descrierea formatelor și respectă‑o: https://intuition-check.com/llm-formats.txtCum creați o singură imagine
Asistentul poate crea și o singură imagine. Copiați blocul ei de cod, deschideți unul dintre seturile dvs. proprii de imagini, apăsați pe și apoi pe „Lipiți din clipboard”. Imaginea este adăugată fără nume: apăsați pe ea și introduceți un nume în câmpul „Nume”. Puteți și să salvați blocul de cod într‑un fișier al cărui nume se termină cu .svg, apoi să apăsați pe în set și să alegeți „Fișiere”; numele fișierului fără .svg devine numele imaginii.
Desenează o singură imagine SVG cu o pisică pentru aplicația Intuition Check. Mai întâi citește descrierea formatelor și respectă‑o: https://intuition-check.com/llm-formats.txtCe altceva poate conține un set
Rugați asistentul să explice ce permit formatele, cu un exemplu de solicitare pentru fiecare posibilitate:
Citește descrierea formatelor pentru aplicația Intuition Check: https://intuition-check.com/llm-formats.txt Spune-mi pe scurt și în cuvinte simple ce se poate face în seturi și imagini: cum se pot adapta imaginile la tema aplicației – diferitele teme, varianta luminoasă și cea întunecată; cum pot primi numele unui set și cele ale imaginilor lui traduceri în alte limbi; ce fel de legende poate avea o imagine; ce poate afișa substituentul „?” al setului (dosul lui). Pentru fiecare posibilitate, dă un exemplu de solicitare pe care ți-o pot trimite. Deocamdată nu desena nimic.Descrierea formatelor pentru AI
Descrierea formatelor este scrisă în engleză pentru un asistent AI, nu pentru a fi citită de oameni. Aceeași descriere se află pe site‑ul web, la adresa din solicitările de mai sus.
This is a specification for language models; it is not formatted for human reading.
Format version: 1
Stable URL: https://intuition-check.com/llm-formats.txt
# Intuition Check: how to make SVG pictures and guess sets
Intuition Check is an iOS app. The app picks one picture of a guess set, hidden, and the user guesses which one.
A guess set is a named, ordered list of pictures. This text tells you how to produce (A) a whole guess set as
one JSON object, or (B) one picture as one SVG document, so that the app accepts it and draws it well.
The user's wishes always win. Every rule, default and style advice in this text is what you do when the user
has not said otherwise: anything the user asks for — any texts, any number of them, any place, size, shape,
colour or layout, a caption over the drawing, a word along an arc — overrides it. Only facts about the app
cannot be overridden, because the app enforces them (what it accepts and refuses, what it removes, how it
draws: sections 2, 3, 5 and the theme rules of 6 — but a sentence there that tells you what to do is still a
default, not a fact about the app); if a wish runs into one of them, do the closest thing the app allows and
say so.
## When the user asks what the formats allow (to explain, not to make)
Answer in the user's language, in plain words, without code. Keep apart what the app does and what you do by
default. The sizes, positions and orders in this text, and its sentences that tell you what to do ("put",
"give", "write", "keep"), are your defaults for a good result: the app does not check them and the user may
ask otherwise. Do not retell them as rules of the app ("must", "required", "not allowed"); say "by default I …".
What the app itself does:
- Themes: four themes, each light and dark. The app never recolours a picture on its own; a picture follows
the theme only where its own file says so (section 6), which you write when asked.
- Names: a set needs a name; a picture's name is optional. The set and every picture may have translations,
each its own languages; the app shows the one for the app language, else the default name.
- Captions: text in a picture is part of the drawing; the app never writes or translates it. A caption is one
fixed text, or holds versions in any number of languages, two included, and the app language picks one.
- The "?" placeholder: a set without a cover shows the app's own "?". The app draws no cover itself. A cover
is a picture like any other: it may show anything, with or without text, follow the theme and the app
language, and stand anywhere in the set.
- Limits: at least 2 pictures to guess (a cover is not one of them), at most 200 in all, 10 MB per SVG; one
refused picture refuses the whole set.
Do not translate the themes' code words (section 6).
Terms used below:
- name: the picture's name as stored in the app (`name`, `nameTranslations`). It is data, not part of the drawing.
- caption: a text drawn inside the picture (an SVG `<text>`). Optional. See section 4.
- app language: the language the app's interface is set to, in the app itself; it may differ from the device's
language. One of the codes in section 3.
- user's language: the language the user writes to you in, unless the user names another.
## 1. Output contract
A. The user asks for a SET (several pictures, "guess set", "set"):
- Answer with ONE JSON object as defined in section 2, in ONE code block. Nothing else is needed.
- If you add words outside the code block, they must not contain `{` or `}`: the app reads the pasted text
from the first `{` to the last `}`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block (chat apps usually show a copy button on it) and paste it into Intuition Check as a new set — or,
on another device, to save it as a file whose name ends in .json and open that file in the app.
B. The user asks for a single PICTURE:
- Answer with ONE SVG document (section 5) in ONE code block.
- If you add words outside the code block, they must not contain `<svg` or `</svg>`: the app reads the
pasted text from the first `<svg` to the last `</svg>`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block and paste it into one of their picture sets in Intuition Check; the picture is added without a
name. Or to save it as a file whose name ends in .svg and add that file to a set: the file name without
".svg" becomes the picture's name, so suggest a file name that is the name, e.g. `Cat.svg`.
In both: do not name the app's buttons or screens from memory, and do not translate their names yourself. The
app's help exists in every language of the app, with the exact names the app shows in that language; the steps
are in its section "#ai_sets", and the page for each language is listed in https://intuition-check.com/llms.txt. If
you can open web pages and the user wants the steps, take the names from the page in the user's language.
Otherwise the one sentence above is enough: the app's help and its own screens show the user where to paste.
Ask first, or proceed:
- Proceed without questions. Decide what the request leaves open, and say what you decided in a sentence or
two beside the code block:
- which things of a kind ("five animals": choose the animals);
- how many pictures, if no number is given: 4;
- the regional form of the user's language: take the likeliest and name it (e.g. "Canadian French");
- translations: as well as you can; name the languages you are least sure of;
- themes not mentioned: fixed colours, and one sentence that a version following the app's themes can be
made;
- a cover with nothing said about what it shows: the question mark (8c).
- Ask only when you cannot start: you cannot tell which language the names should be in, or the request names
no subject at all. Then at most 2 questions, in ONE message, in the user's language, each with the choice
you will make if the user does not mind; no code block in that message. Never ask what the message already
says. Plain words: no "code block", "JSON", "opaque", "plate", "import", nothing about how the format works.
- If you cannot ask (there is no dialogue), or the user tells you not to: proceed.
- What you say beside the code block is in the user's words: "its own background", not "opaque plate";
language names, not codes; at most four short points. The file endings .json and .svg are allowed: the
user needs them.
- Like all words outside the code block: no `{` or `}` next to a set, no `<svg` next to a picture. Do not
quote code outside the code block.
Defaults when the request does not say otherwise:
- No caption text in the drawing (section 4, option 1).
- No theme colours (section 6). Fixed colours of your own.
- Names: always give every picture a `name`, in the user's language. Give no `nameTranslations` unless the
user asks for other languages or for captions in several languages (section 4, option 4).
- Number of pictures: what the user asked for; never fewer than 2 or more than 200.
- No cover (section 2). A cover the user asks for is extra: it is not one of the pictures asked for.
## 2. The set format (JSON)
```json
{
"intuitionCheckSet": 1,
"name": "Animals",
"nameTranslations": { "ru": "Животные", "de": "Tiere" },
"images": [
{ "name": "Cat", "nameTranslations": { "ru": "Кот", "de": "Katze" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><circle cx=\"50\" cy=\"56\" r=\"30\" fill=\"#f57c00\"/><path d=\"M24 44 L28 14 L48 30 Z M76 44 L72 14 L52 30 Z\" fill=\"#f57c00\"/></svg>" },
{ "name": "Fish", "nameTranslations": { "ru": "Рыба", "de": "Fisch" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><ellipse cx=\"44\" cy=\"50\" rx=\"30\" ry=\"18\" fill=\"#1976d2\"/><path d=\"M70 50 L92 32 L92 68 Z\" fill=\"#1976d2\"/></svg>" }
]
}
```
(The drawings above are kept tiny to show the shape of the file. More examples are in section 8.)
Keys:
- `intuitionCheckSet` (required): the integer 1.
- `name` (required): the set's default name. Not empty.
- `nameTranslations` (optional, on the set and on each image): object, language code → name. Codes: section 3.
- `images` (required): array of at most 200 objects, at least 2 of them pictures to guess (a cover is one
more, not one of the 2).
Array order = display order. Each object:
- `name` (optional in the format; always give it): the picture's default name.
- `nameTranslations` (optional): as above.
- `svg` (required): one complete SVG document as a JSON string (section 5).
- `cover` (optional): the JSON literal `true` on the picture that is the set's cover (below). Leave it out
on every other picture.
- Unknown keys are ignored. Do not add any.
The cover: while the app hides the value to guess, it shows a "?" in its place. A set — any set, with or
without captions — may bring its own picture for that place: the cover. Give one ONLY when the user asks for
it (a cover, a back, a placeholder, a question-mark picture). It shows what the user wants: for a set of
playing cards, for example, the pattern of a card's back. If the user does not say what it shows, draw the set's
own frame, with a question mark where the other pictures have their subject (8c; the last picture of 8f);
when the pictures' plates differ in colour, a plate of the same family (8f: a neutral grey). Exactly one
picture gets `"cover": true` (if several do, the first counts and the others are ordinary pictures). The
cover is never an answer, so the set still needs at least 2 other pictures. Put it last in `images` (your default; the app takes it at any place). Give it
a `name` in words ("Question mark", not "?") and, in a multilingual set, `nameTranslations` in the same
languages as the pictures: the app shows the cover's name in the set's list of pictures, in the app language.
By default the cover has no caption (no word under it); the app draws any text it has. Its question mark is the cover's subject; it only borrows the
`class="caption"` pattern of section 4, option 4, so that it changes with the app language. Write the mark
as text (preferred) in two forms: `?`, and `؟` for Arabic and Urdu (the form those languages write). The app
does not change the mark itself: the cover holds both, and its own style sheet shows the one for the app
language. That works in every set, also in one without captions; the two marks are then its only `<text>`. Drawn as a
shape instead, the mark is the same in every app language: Arabic and Urdu see the Latin form. A cover with
a subject of its own (a card back, a cloud) needs no `<text>` and no style sheet.
A single picture (answer B) has no cover key: the user marks a picture as the cover inside the app. A single
picture meant as a cover and asked with a caption: do both, and say that the word will show on the cover.
Rules:
- Strict JSON, UTF-8: no comments, no trailing commas. Non-ASCII characters may be written as they are.
- Inside the `svg` string escape `"` as `\"` and `\` as `\\`; write the SVG on one line, or write each line
break as `\n`. No raw line break or tab inside a JSON string. Where you join two lines, put one space,
never nothing. No other escape is needed: an apostrophe stays `'` (`\'` is not JSON), and letters of any
script stay as they are.
- Types: `intuitionCheckSet` is the number 1, every name and translation is a string, `cover` is `true`. A
wrong type (`"cover": "true"`, a number as a name, `null` as a translation) makes the app refuse the whole
text.
- If the app refuses any one picture, it imports nothing and names the refused pictures. Every picture must
be valid.
- A name is one line of plain text. The app trims it, turns line breaks and tabs into spaces, and cuts it at
256 characters. Keep names short (one to three words): they are shown small.
How names are shown:
- A set is multilingual when the set or any image has at least one translation.
- In a multilingual set the app shows, for the app language: the translation with exactly that code; else
the translation with the code's first part (`fr-CA` → `fr`, `en-GB` → `en`, `es-419` → `es`); else the
default `name`.
- In a set without translations the app shows the default `name` in every app language.
When the user asks for a multilingual set:
- Default `name` (set and images): in the user's language.
- `nameTranslations`: one entry per requested language, on the set AND on every image. Give the same
languages on every image (the app does not require it: an image without an entry shows its default name).
- The language of the default `name` gets no entry of its own: a language without an entry shows the default
name.
- A regional code (`en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA`) needs its own entry only when its word
differs from the `en` / `es` / `fr` entry. `pt-BR` and `pt-PT` have no common code: each requested one that
is not the language of the default `name` needs its own entry (asked for "Portuguese" with an English default
name: give both). The same for `zh-Hans` and `zh-Hant`.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`, `fr`,
`es`), in names as in captions: every form of that language then shows it.
- Languages not named ("a multilingual set"), or "all languages": every language of section 3 — 53 codes,
47 entries (see there). Translate as well as you can (section 1). Leave out only a language you cannot
write at all (it then shows the default name), and tell the user which.
- `nameTranslations` change only names, never a caption. A multilingual set has no captions unless the user asks for them; a
caption drawn inside the pictures needs its own words for each language in the SVG itself (section 4,
option 4).
## 3. Language codes
Write the codes exactly as here (case matters):
ar bg bn ca cs da de el en en-AU en-CA en-GB es es-419 fi fr fr-CA gu he hi hr hu id it ja kk kn ko lt ml mr ms
nb nl or pa pl pt-BR pt-PT ro ru sk sl sv ta te th tr uk ur vi zh-Hans zh-Hant
A code that is not in this list is not an error: the app drops it. An entry
with an empty value is dropped.
"All languages" is 53 codes but 47 entries besides the default, in names and in captions: the user's language
is the default and needs none, and `en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA` show the `en` / `es` / `fr`
word unless theirs differs. (With a Bengali default, `en` is one of the 47 and `bn` is not.)
## 4. Captions (text inside the drawing): four options
Names (section 2) are separate from captions: the app never writes a name into a picture and never changes any
text of a picture. Give names always. Text in, on or under the picture — whatever the user calls it (name,
word, label) — is a caption request; a wish about the words alone (correct, careful) is not. If you leave out
something that was asked for, say so. Lettering that is part of the subject (STOP on a road sign) is
drawing, not a caption: allowed under every option, written once, with `lang`.
Urdu is drawn in Nastaliq, its own style, which reaches lower under the line than other scripts (about
0.3 × font-size): leave room under an Urdu caption. A `؟` in Urdu is smaller in Nastaliq: give it its own text and size (8c).
A caption's `lang` may be a regional code (`en-GB`, `fr-CA`), also where its name stands under the parent code.
Choose the caption option from the request:
1. DEFAULT — no caption. The drawing has no `<text>` that spells the name. Also for a multilingual set
whose user did not ask for captions.
2. ONE-LANGUAGE caption — when the user asks for a caption / label / word in or under the picture and names
no languages for it. A plain `<text>` with the word in the user's language; every app language shows
that same word. Put `lang="CODE"` of the caption's language on the `<text>`: a picture
with text is drawn anew for each app language, and without `lang` the letter forms follow the app language. No
`letter-spacing` in Arabic, Hebrew, Thai or an Indic script. Example:
`<text lang="ru" x="50" y="91" font-size="12" font-family="sans-serif" text-anchor="middle" fill="#222222">Кот</text>`
3. TWO LANGUAGES AT ONCE — when the user names exactly two languages for the word under the picture and does
not say it should change with the app's language. The same for any other text of the picture: each gets its
two lines. Two `<text>` lines, each with its `lang`, both always
shown, no style sheet for them: the user's language on top, font-size 10, baselines at y = 84 and 95,
subject in the upper 68 units (100-unit viewBox). A line in a script of 8b's "Lettering" block takes that
`font-family` as an attribute; a long word follows "Size" below. Names: the user's language as `name`,
the other in `nameTranslations`. Say that both words always show, and that captions that change with the
app's language can be made instead.
4. CAPTIONS IN SEVERAL LANGUAGES — when the user names three or more languages for the captions, or asks for
captions in all of the app's languages, or for captions that follow the app's language (= all of them).
The picture holds one caption per language and a small style sheet; through that style sheet the app
language picks the caption (8b, 8f). Languages: exactly those the user named; "all" = every language of
section 3 (53 codes, 47 entries: see there), translated as well as you can (section 1). In a set, give
every image `nameTranslations` with the same languages and the same words, so that the name and the
caption agree.
How option 4 works:
- A picture that contains `<text` or `:lang(` is drawn anew for each app language it is shown in, each time
inside an HTML page whose language is that app language: `<html lang="CODE">`, CODE from section 3 (`ru`,
`pt-BR`, `zh-Hant`, …). The app changes nothing in the file; the file's own CSS picks the caption with the
selector `:lang()`.
- `:lang(x)` matches a page in `x` and in every `x-…`: `:lang(fr)` also matches `fr-CA`, `:lang(es)` also
`es-419`, `:lang(en)` also `en-GB`. `pt-BR` and `pt-PT`, `zh-Hans` and `zh-Hant` are written separately.
- The pattern:
- All language versions of one text in ONE group with `class="caption"`; each `<text>` in it is one
language version, all at the same place.
- Any number of texts, anywhere and in any form (labels on parts, a title, words along an arc with
`<textPath href="#id">`): give each text its own group with `class="caption"` holding its language
versions; the one style sheet serves them all.
- The default caption has the class `default`. It carries the word of the default `name`, in the user's
language. It is shown when the page has no language and in every language that has no caption of its
own. The user's language is one of those: its code stands in no rule and on no caption. (In 8b and 8f
the default word is English, so `en` appears nowhere. The Zodiac files call this class `en`.) The
default caption is also shown on pages of other languages: give it `lang="CODE"` of the user's language.
If that language has a line in the "Lettering" block of 8b, add `.default` to that line's selector
(`.default, .hi, .mr { font-family: … }`; `.default` alone when no caption has that class), and to the
`letter-spacing: 0` line if you use letter-spacing.
- Every other caption's `class` lists the codes of the languages that show it. Languages with the same
word may share one caption: `class="bg ru"`; that changes only the `class`, never the style sheet. These
captions need no `lang`: each shows only on a page of its own language.
- The style sheet, in this order:
`.caption text { display: none }` — hide every caption;
`.caption .default { display: inline }` — show the default one;
`:lang(ar, bg, …) .default { display: none }` — hide the default one in every language that has its own
caption (list them all);
`:lang(ar) .ar, :lang(bg) .bg, … { display: inline }` — show each language's own caption.
- A regional code whose word differs from its parent's (`es-419` next to `es`): its own caption, its code in
both rules like any other, and one more rule: `:lang(es-419) .caption .es { display: none }` (the extra
`.caption` makes it win wherever it stands in the sheet). If its word is the parent's, give it nothing.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`,
`fr`, `es`), so every form of that language shows it. "Portuguese" alone: one caption
`class="pt-BR pt-PT"` when the word is the same.
- Do not repeat the default word under the user's own code (no caption, no rule, no `nameTranslations`
entry for it).
- Check: the codes in the hiding rule = the codes in the showing rule = the codes on the captions, and
each code is on exactly one `<text>`; the user's own code is in none of the three. Otherwise a language
shows no caption, or two at once.
- To leave a language out: no `<text>` for it and its code in neither rule. It then shows the default
caption.
- In a set: the same style sheet, the same attributes on the caption group and the same languages in every
picture, character for character. Only the words differ, and the size of a long word. (A cover has its
own text and rules: 8c, 8f.)
- Size: the app does not measure or shrink text. Choose one `font-size` on the group at which the captions
fit the free width. A word too long for it: first its own smaller `font-size` attribute, down to 9 (on a
100-unit viewBox); if it still does not fit, a shorter everyday word (and the same word as its name).
Never under 9. To estimate a width (measured in WebKit on a Mac):
- ordinary case in bold `sans-serif` (8f): 0.45 to 0.6 × font-size per letter. Треугольник is 77 of 100
units wide at font-size 12, and 68 at 10.5;
- a Chinese character: about 1 × font-size;
- Indic scripts, Thai, Arabic, Hebrew in bold `sans-serif`: 0.3 to 0.55 × font-size per code point (13
words measured).
- Case: ordinary case, as in 8f; capitals with wide spacing only for the style of 8b. Capitals follow each
language's rules: Turkish i → İ; Greek capitals lose the accent (ΑΣΤΈΡΙ → ΑΣΤΕΡΙ); German ß → SS.
- Fonts: copy the "Lettering" block of 8b (in a set, only the lines of the scripts you use). It gives every
script outside Latin, Cyrillic and Greek its own font list (fonts present on Apple devices, at a weight
they really have), and sets `letter-spacing` to 0 for Arabic, Hebrew, Thai and the Indic scripts — in most
of them the letters join or stack, and spacing breaks that (a line needed only when the group has
letter-spacing). Japanese, Chinese and Korean each get their
own font so that a Han character takes its regional form; that is why `zh-Hans` and `zh-Hant` keep
separate captions even with the same word.
- Direction: the page is left-to-right in every app language. Keep `text-anchor="middle"` for every script.
An Arabic, Hebrew or Urdu caption mixed with digits or Latin letters has not been tested: avoid it.
- A caption drawn twice (e.g. a shadow under it): put the group once inside `<defs>` with an `id`, and draw it
with two `<use href="#id">` that carry the colours and the offset.
- Whole set: captions and names in all languages fit in one answer. Write every language that was asked for, in
every picture. Do not ask about it, and do not tell the user it may not fit. In a set, leave out comments
and indentation.
- Never: fewer languages than asked without saying which are missing; captions left out when they were asked
for; one set spread over several messages or delivered as single pictures; a set cut short. A set is
always ONE JSON object in ONE message.
Start from 8f (a small set with captions and a cover, 100-unit viewBox). Take from 8b (a picture with a
caption in every language) its "Lettering" block, and its gold medallion style only when the user asks for
it; 8c is that set's cover. All three are complete and tested in the app. 8b and 8c are built like the app's
own Zodiac set; one of its files, if you can open web pages (you do not need it):
https://intuition-check.com/sets/zodiac/zodiac-08-scorpio.svg
## 5. The SVG document: what the app does with it
Facts (from the app's code):
- Size limit: 10,000,000 bytes per SVG (UTF-8). A larger SVG is refused.
- The app recognises an SVG by the characters `<svg` within the first 4096 bytes. Begin the document with
`<svg`: no XML declaration, DOCTYPE or comment before it.
- The app draws the SVG into a still bitmap, at most 1600 pixels on the longer side, with WebKit, inside an
HTML page. A picture with text is drawn anew for each app language it is shown in, and one with theme
rules for each theme. The background is transparent: where the drawing paints nothing, the app's own
background shows, light or dark depending on the user's theme.
- Scaling: the root's `viewBox` is fitted into the bitmap, aspect ratio kept, centred. `width` and `height`
on the root are ignored. A picture without a `viewBox` is accepted, but drawn unscaled (cut off or tiny):
always write one.
- The aspect ratio is read from the first `viewBox="minx miny width height"` in the first 4096 bytes: double
quotes, four numbers separated by spaces or commas, positive finite width and height. If it cannot
be read, the bitmap is square. Ratios outside 1:20 … 20:1 are clamped.
- `preserveAspectRatio="none"` on the root is replaced with `xMidYMid meet`: a picture is never stretched.
- Scripts never run. Nothing is loaded from the network: only content inside the file is drawn.
- Rendering has a time limit (10 seconds to load, 10 seconds to draw). A picture that exceeds it is refused.
Removed before drawing (so never write them; the rest of the picture is still drawn):
- these elements with everything inside: `script`, `foreignObject`, `meta`, `link`, `base`, `iframe`, `frame`,
`frameset`, `object`, `embed`, `applet`, `portal`, `form`, `input`, `button`, `textarea`, `select`, `option`,
`audio`, `video`, `source`, `track`, `template`, `noscript`;
- every attribute whose name starts with `on` (`onload`, `onclick`, …);
- every `href` / `xlink:href` whose value does not start with `#` (a part of the same file) or `data:image/`;
- `@import` in a style sheet; `<?xml-stylesheet …?>`; a DOCTYPE with an internal subset (`[ … ]`).
The removal works on the text of the file: the character sequences `on…=`, `href=` and `@import` are also
removed from text content and CSS, so do not write them there.
Allowed and drawn: shapes, `path`, `g`, `text`, `tspan`, gradients (`linearGradient`, `radialGradient`),
`pattern`, `mask`, `clipPath`, `filter`, `defs`, `symbol`, `use` with `href="#id"`, `<style>` with inline CSS,
`title`, `desc`, `image` with `href="data:image/…"` (a picture embedded in the file).
Not removed, but useless: `a` (a link does nothing in a picture in the app).
Rules for the SVG you write:
1. Root: `<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">` … `</svg>`. Double-quoted
attributes. Lower-case `<svg`. One root; no nested `<svg>` elements.
2. Square `viewBox` (`0 0 100 100`) unless the user asks for another shape. The same `viewBox` for every
picture of a set.
3. Self-contained: no external images, fonts, style sheets or links. For text use
`font-family="sans-serif"` (or `serif`, `monospace`), or the font lists of 8b, which end with one of them:
the text is drawn with the device's own fonts.
4. Well-formed XML: every element closed, attribute values quoted, `&` `<` `>` in text and attribute values
written as `&` `<` `>`. Only SVG elements; no HTML elements.
5. Readable small: the app shows pictures in a grid, each cell may be small. One clear subject that fills
most of the viewBox; a few large shapes; strong contrast; no fine detail. On a 100-unit viewBox: the
subject's lines at least 2 wide, a caption's font-size at least 10, a long word 9. Ornament may be
thinner (the rings of 8b); in a small cell it may not be seen. The examples in this text are bare on
purpose; do not copy their simplicity. Build the subject from about 4 to 10 shapes: its outline, its
parts, and one or two details that make it this thing and no other. Someone who sees only the picture
must be able to name it.
Pale or pastel colours: keep the silhouette. The subject's main shape, or an outline around it, must differ
from the plate by at least 3:1 — a darker outline, or a deeper plate. That is for the silhouette only:
details inside the subject are free.
6. Distinct: the game needs the pictures told apart at a glance. Every picture of a set must differ clearly
from every other in silhouette or in main colour — not only in a detail. No two pictures with the same
SVG text.
7. One style across a set: the same viewBox, margins, line weights, palette family, and the same kind of
background (all with a plate, or all without). With captions: the same lettering and caption place in
every picture.
8. Background: the bitmap is transparent and the app's background can be light or dark. Either draw an
opaque plate of your own behind the subject (e.g. `<rect width="100" height="100" rx="12" fill="…"/>`), or
use only colours that stay visible on both white and near-black, or use theme colours (section 6).
9. Unique `id` values inside one SVG. Ids of different pictures do not clash (each picture is drawn alone).
Do not start an id with `ic-` unless it is a theme rule, and do not name a class of your own `ic-…` or a
variable `--ic-…` (section 6).
10. Keep it light: no heavy filters (large blurs), no deep `use` nesting, no animation (the app does not remove it, but
draws the picture as a still image).
11. A caption must not cross the drawing, unless the user allowed it (labels on the drawing's parts, a word on
a sign or over the subject are such wishes). Any text stays inside its own shape when it has one (a sign,
a label, a slice), and inside the picture. Keep the subject and the caption
apart — e.g. on a 100-unit viewBox: the subject above y = 78 and one caption line with its baseline at
y = 91; with two lines (section 4, option 3), the subject above y = 68.
## 6. Theme colours
Use this section ONLY when the user asks for pictures that follow the app's theme, or for light and dark
versions. Otherwise use fixed colours, no id that starts with `ic-`, no class `ic-…` and no variable
`--ic-…`. When the user said nothing about
themes: fixed colours, and offer a version that follows the themes (section 1). "Looks good in light and dark
mode" is not a theme request: an opaque plate with fixed colours does it (section 5, rule 8). A theme request
wins over a colour description in the same message ("gold on dark, matching the app's themes": theme rules).
The app has four themes — `sand`, `ocean`, `forest`, `dusk` — each in a `light` and a `dark` version. These words
(and `light`, `dark`) are code words for the rules below, not what the user sees: the app shows the four themes
under its own names in the user's language. When you talk to the user, do not translate the code words
yourself; say "the app's four themes" (and "light" / "dark" in the user's language), or, if you can open the
app's help page in the user's language (see section 1), take the themes' names from it.
Every version has its own values for five colours:
- `background` — the colour behind every view;
- `surface` — plates and panels on a view;
- `text` — the app's text colour;
- `accent` — the colour of buttons that are not filled;
- `soft` — in a light version the same as `accent` (a `soft` part on an `accent` part cannot be seen there);
in a dark version a pale tone close to the text colour.
The values (#rrggbb), in the order background, surface, text, accent, soft:
- sand light: f6f2ea eae3d5 403a35 645339 645339
- sand dark: 1b1a18 282622 c7c4bd b89b70 d2cbbe
- ocean light: eef4f7 dde8ee 363d40 3e5a6a 3e5a6a
- ocean dark: 0d1a23 16272f bec4c7 82a3b6 c6d4db
- forest light: f1f4ec e1e8d7 353e34 4a5e46 4a5e46
- forest dark: 111a14 1b261e bec4bd 8ba586 c9d4c6
- dusk light: f6f1f6 eae0ec 3f3944 5e4a6a 5e4a6a
- dusk dark: 17121c 231b2a c2bdc5 a894b4 d3c9d9
All four themes are muted: no colour above is bright. `text`, `accent` and `soft` on `background` or `surface`
have a contrast of at least 5.6:1 in every version.
Fixed colours and theme colours mix freely: give rules only to the parts that should follow the theme (a plate,
outlines, the main shape) and keep your own fixed colours where the picture needs them (the arcs of a rainbow,
a red apple). A part without a rule is drawn as written in every theme.
A part that keeps a fixed colour sits on a plate that changes: check it against the light and the dark
background and surface values of the table. Near-black vanishes on the dark ones (#1b1b1b: 1.01:1), white and
yellow on the light ones (#ffffff: 1.11:1, #f9a825: 1.54:1). Give such parts the theme's text colour — in a
style sheet `fill: var(--ic-text, #333333)` (or `stroke:`), with ids `ic-text` or `ic-stroke-text` — or
use a mid-tone (#e53935: 3.30:1 on the light ones, 3.57:1 on the dark ones).
Captions on a themed plate take the theme's text colour. In a style sheet: one more line,
`.caption { fill: var(--ic-text, #222222) }`, in the sheet that already picks the caption; a single `<text>`
gets a class and the same line; a caption drawn twice through `<use>` gets the class on the `<use>` that
carries its colour (8b). With ids: give the caption group `id="ic-text"` and a written `fill`; the group may
also carry `class="caption"`; a single `<text>` may carry the id itself. A themed cover's mark is coloured
the same way.
There are two ways to write theme colours, and the app reads both. Use a style sheet (6.1), also when the
user will edit the file in Inkscape (6.4). Use ids (6.2) instead when the user says the file will be edited
in Figma, Illustrator, Affinity or Sketch, or asks for ids: those editors write the file anew and drop its
`<style>` element, while ids can come through as layer names (Figma only with its option to include ids).
One way per picture, and in a set the same way in every picture: the app accepts both in one file, but a
rule in a group's id overrides the sheet colours of the classed shapes inside that group.
### 6.1 A style sheet
The app adds to the root `<svg>` the classes `ic-sand` | `ic-ocean` | `ic-forest` | `ic-dusk` and `ic-light` |
`ic-dark`, and defines the CSS variables `--ic-background`, `--ic-surface`, `--ic-text`, `--ic-accent`,
`--ic-soft` — but only if the file contains, in its `<style>` element, one of those six class names after a
dot (e.g. `.ic-dark`), or, in `<style>` or in a `style` attribute, a variable name that starts with `--ic-`.
```
.plate { fill: var(--ic-surface, #dddddd) }
.leaf { fill: var(--ic-accent, #e53935) }
.ic-dark .dot { fill: #ffd54f }
.ic-forest.ic-dark .dot { fill: #69f0ae }
```
The second value inside `var()` is the colour other viewers show. Give the styled elements a `class` and no
`fill` in a `style` attribute. The second value is needed: always write it.
- The five variable names are the only ones. Another name (`--ic-bg`) is never defined: its second value is
drawn in every theme.
- Write `var(--ic-…)` inside the `<style>` element, not in a `fill="…"` or `stroke="…"` attribute: the app
does not look there, and with no other mention it defines no variables.
- The app writes the six classes on the root. Never write one of them on an element yourself.
- A sheet rule beats a colour written in a `fill` / `stroke` attribute; a colour in a `style` attribute beats
the sheet.
- Of two sheet rules of equal weight the later one wins: plain rules first, then `.ic-light` / `.ic-dark`
rules, then theme rules.
- Put these lines into the same `<style>` as the caption rules of section 4, when the picture has them.
### 6.2 Rules in an id
A rule = optional limits + a colour.
- Limits, at most one of each kind, any order: a theme (`sand` | `ocean` | `forest` | `dusk`); a version
(`light` | `dark`); a paint (`fill` | `stroke`). No limits = every theme, both versions, fill and stroke.
- Colour: one of the five names above, or your own colour as exactly six hex digits (`1e88e5`). Colour words
(`red`) are not colours in a rule. All rule words are English.
`id="ic-` + one or more rules, all words joined by hyphens, own colours without `#`:
- `ic-text` — the text colour everywhere;
- `ic-light-accent-dark-soft` — accent in light versions, soft in dark versions;
- `ic-dark-1e3a2a` — own colour in dark versions; as drawn in light versions;
- `ic-ocean-dark-c3ced4` — own colour in the dark version of Ocean only;
- `ic-stroke-accent` — accent on the outline only.
- `ic-fill-accent-stroke-text` — two rules in one id: accent inside, text colour on the outline.
Reading stops at the first character that is not an ASCII letter, digit or hyphen, and at the first word that
is not a rule word. So keep ids unique with a numeric suffix: `ic-text-2`, `ic-text-3`. A word of your own
ends the rules: `ic-moon-text` holds no rule. A six-letter word of hex digits (`facade`) is read as a colour.
What a rule does:
- The id may be on a shape, a `text`, or a group `g`. A rule on a group covers everything inside it, except
what is inside `defs`, a gradient, `mask`, `pattern`, `clipPath`, `marker`, `symbol` or `filter`.
- For each element, fill and stroke are chosen separately. Its own rule is used when one applies in the
current theme and version; otherwise the rule of the innermost enclosing group that has one that applies;
otherwise the colour stays as drawn.
- Among several rules of one element that apply: theme + version beats theme, theme beats version, version
beats no limit; then a rule with `fill` / `stroke` beats one without; then the first one written.
- The chosen colour replaces a plain colour written in the element's `fill` / `stroke` attribute or in its
`style` attribute. Left as written: `none`, `transparent`, `currentColor`, `inherit`, `url(…)` (gradients),
`var(…)`, and colours with their own alpha (`#rrggbbaa`, `#rgba`, `rgba(…)`, `hsla(…)`).
- A `path`, `rect`, `circle`, `ellipse`, `polygon`, `polyline`, `text` or `use` with no `fill` written gets
the chosen fill added. A `line` does not. A stroke is never added: a rule colours a stroke only where a
`stroke` with a plain colour is written on that element itself (not only on its group).
- So, to be safe: write `fill="#rrggbb"` (and `stroke="#rrggbb"` where there is an outline) on every element
that a rule should colour. These written colours are also what other SVG viewers show.
- A `stop-color` or `color` written on a covered element is replaced too (by the fill colour, else by the
stroke colour). A gradient with a rule in its own id has its stops recoloured.
- Theme rules are not applied to an SVG with more than 50,000 tags; it is drawn as written.
- Do not colour the same element both ways. When an element with a `class` has a rule — its own or its
group's — the app writes the rule's colour into the element's `style` attribute, which beats the sheet
(unless the sheet says `!important`): a group's rule so overrides the sheet colours of the classed shapes
inside it. On an element without a `class` the sheet wins wherever one of its selectors reaches it.
### 6.3 Other ways the app reads (do not use unless asked)
- A `<desc>` directly inside an element, beginning with `Intuition Check`, then one rule per line as
`limits: colour` (e.g. `dark stroke: text`, `light: #1e88e5`); a first-line form `Intuition Check: text`.
- Inkscape swatches (a one-colour gradient whose label or id holds rules).
### 6.4 If the user wants to edit the file in Inkscape later
Inkscape keeps both ways, in Inkscape SVG and in Plain SVG.
- A style sheet (6.1): Inkscape keeps the `<style>` element with the `var()` inside it. Write `var()` only
there, never in a `style` attribute (Inkscape removes such an attribute when the element is edited), and add
`!important` to every colour in the sheet (Inkscape writes colours into the element's `style` attribute,
which otherwise wins).
- Ids (6.2): Inkscape keeps ids. Labels are lost in Plain SVG.
## 7. Checklist — run before answering
For a set:
1. The answer is one code block holding one JSON object; it parses as strict JSON.
2. `"intuitionCheckSet": 1` is present; `name` is not empty.
3. `images` has 2 to 200 entries: exactly the number of pictures the user asked for, plus the cover if
there is one.
4. Every image has a non-empty `name` and an `svg` string.
5. In every `svg` string each `"` is written `\"`, and there is no raw line break.
6. Language codes are from section 3, spelled exactly. In a multilingual set every image and the set have
the same languages.
7. Captions follow section 4: none by default; one language only if asked, with `lang` on the `<text>`
two named languages: two lines, both shown, each with `lang`; three or more, or all, only if the user
named them or asked for all. Then: the default caption has `lang`; the codes in the hiding rule = the
codes in the showing rule = the codes on the captions, each on exactly one `<text>`; the same style sheet
in every picture but the cover; every image has `nameTranslations` with the same languages and words.
8. A cover only if asked: one picture with `"cover": true`, last, plus at least 2 other pictures.
9. The answer is whole: the JSON ends with its `}`, and no picture was shortened or left for later.
10. Beside the code block: the sentence on how to use it, and what you assumed (section 1).
For every SVG (in a set or alone):
11. Starts with `<svg`, has `xmlns="http://www.w3.org/2000/svg"` and `viewBox="0 0 W H"` in double quotes,
ends with `</svg>`.
12. Well-formed: all elements closed, `&` `<` `>` escaped in text.
13. None of: `script`, `foreignObject`, `a`, `style` with `@import`, `on…` attributes, `href` to anything
but `#id` or `data:image/…`, external fonts, HTML elements, nested `svg`, animation.
14. Far under 10,000,000 bytes.
15. The subject is large, simple, high-contrast; the picture differs clearly from every other picture of the
set; it is visible on a light and on a dark background; no caption crosses the drawing.
16. Theme rules only if asked; without them no id starts with `ic-` and the style sheet has no `.ic-` class
and no `--ic-` variable. With them: one method in the picture, the same in every picture of the set.
Style sheet: `<style>` itself holds a `--ic-` variable or one of the six classes (a `var()` only in a
`fill` attribute does nothing); the variable names are the five of section 6; every `var()` has a second
value. Ids: every word after `ic-` is a rule word; the element has its `fill` (and `stroke`) written.
Every fixed colour left on a themed plate was checked against the light and the dark values.
17. Ids are unique within the SVG.
## 8. Complete examples
### 8a. Minimal set, no captions
```json
{
"intuitionCheckSet": 1,
"name": "Shapes",
"images": [
{ "name": "Circle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"50\" r=\"30\" fill=\"#e53935\"/></svg>" },
{ "name": "Triangle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 18 L84 78 L16 78 Z\" fill=\"#1565c0\"/></svg>" }
]
}
```
### 8b. One picture with a caption in every language (section 4, option 4)
A star in a gold medallion with its caption in all 53 languages, built like the app's Zodiac set: the
"Theme" block turns the gold to bronze in light versions (section 6.1), the "Language" block picks the
caption, the "Lettering" block gives each script its font. Languages with the same word share a caption;
es-419 and fr-CA follow es and fr; a page with no language, or one not listed, shows the default caption,
"STAR" (the user's language is English here). The "Theme" block is not part of option 4: this medallion has
no plate, and its gold has to darken on a light background. Without a request for theme colours leave that
block out and draw an opaque plate (section 5, rule 8), as 8f does.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme. The app gives the root the classes ic-light or ic-dark (and ic-<theme>).
The gold is drawn for a dark background; on a light one it turns bronze. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
.ic-light .shadow-glyph { stroke-opacity: 0.27 }
/* Language. Every caption is in the file once; its class names the languages that
show it. The page's language (html lang) picks the caption; without a language,
or with one not listed here, the default one. fr-CA follows fr, es-419 follows es. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, bg, bn, ca, cs, da, de, el, es, fi, fr, gu, he, hi, hr, hu, id, it, ja, kk,
kn, ko, lt, ml, mr, ms, nb, nl, or, pa, pl, pt-BR, pt-PT, ro, ru, sk, sl, sv, ta,
te, th, tr, uk, ur, vi, zh-Hans, zh-Hant) .default { display: none }
:lang(ar) .ar, :lang(bg) .bg, :lang(bn) .bn, :lang(ca) .ca, :lang(cs) .cs, :lang(da) .da,
:lang(de) .de, :lang(el) .el, :lang(es) .es, :lang(fi) .fi, :lang(fr) .fr, :lang(gu) .gu,
:lang(he) .he, :lang(hi) .hi, :lang(hr) .hr, :lang(hu) .hu, :lang(id) .id, :lang(it) .it,
:lang(ja) .ja, :lang(kk) .kk, :lang(kn) .kn, :lang(ko) .ko, :lang(lt) .lt, :lang(ml) .ml,
:lang(mr) .mr, :lang(ms) .ms, :lang(nb) .nb, :lang(nl) .nl, :lang(or) .or, :lang(pa) .pa,
:lang(pl) .pl, :lang(pt-BR) .pt-BR, :lang(pt-PT) .pt-PT, :lang(ro) .ro, :lang(ru) .ru,
:lang(sk) .sk, :lang(sl) .sl, :lang(sv) .sv, :lang(ta) .ta, :lang(te) .te, :lang(th) .th,
:lang(tr) .tr, :lang(uk) .uk, :lang(ur) .ur, :lang(vi) .vi, :lang(zh-Hans) .zh-Hans,
:lang(zh-Hant) .zh-Hant
{ display: inline }
/* Lettering. A script whose letters join or stack gets no letter-spacing; every script
outside Latin, Cyrillic and Greek gets its own font. Telugu at 500: iOS has Kohinoor
Telugu only up to Medium, and WebKit would fake a 600 from it. */
.ar, .ur, .he, .bn, .gu, .hi, .mr, .kn, .ml, .or, .pa, .ta, .te, .th { letter-spacing: 0 }
.ar, .ur { font-family: system-ui, -apple-system, Geeza Pro, sans-serif }
.he { font-family: system-ui, -apple-system, Arial Hebrew, sans-serif }
.bn { font-family: Kohinoor Bangla, Bangla Sangam MN, sans-serif }
.gu { font-family: Kohinoor Gujarati, Gujarati Sangam MN, sans-serif }
.hi, .mr { font-family: Kohinoor Devanagari, Devanagari Sangam MN, sans-serif }
.kn { font-family: Noto Sans Kannada, Kannada Sangam MN, sans-serif }
.ml { font-family: Malayalam Sangam MN, Malayalam MN, sans-serif }
.or { font-family: Noto Sans Oriya, Oriya Sangam MN, sans-serif }
.pa { font-family: Mukta Mahee, Gurmukhi Sangam MN, sans-serif }
.ta { font-family: Tamil Sangam MN, InaiMathi, Tamil MN, sans-serif }
.te { font-family: Kohinoor Telugu, Telugu Sangam MN, sans-serif }
.th { font-family: Thonburi, Noto Sans Thai, sans-serif }
.ja { font-family: Hiragino Sans, Hiragino Kaku Gothic ProN, sans-serif }
.ko { font-family: Apple SD Gothic Neo, Noto Sans KR, sans-serif }
.zh-Hans { font-family: PingFang SC, Heiti SC, sans-serif }
.zh-Hant { font-family: PingFang TC, Heiti TC, sans-serif }
.te { font-weight: 500 }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The captions. Drawn twice at the end of the file: the shadow, then the gold. A long
word would carry its own smaller font-size and letter-spacing. Urdu says lang="ur" and is
drawn in Nastaliq. zh-Hans and zh-Hant keep two captions
with the same word: each takes its own font. -->
<g id="caption" class="caption" text-anchor="middle" font-family="Helvetica Neue, Helvetica, -apple-system, sans-serif" font-weight="600" font-size="52" letter-spacing="6.8">
<text class="default" x="259.4" y="466">STAR</text>
<text class="ar" x="259.4" y="466">نجمة</text>
<text class="bg ru" x="259.4" y="466">ЗВЕЗДА</text>
<text class="bn" x="259.4" y="466">তারা</text>
<text class="ca es" x="259.4" y="466">ESTRELLA</text>
<text class="cs" x="259.4" y="466">HVĚZDA</text>
<text class="da nb" x="259.4" y="466">STJERNE</text>
<text class="de" x="259.4" y="466">STERN</text>
<text class="el" x="259.4" y="466">ΑΣΤΕΡΙ</text>
<text class="fi" x="259.4" y="466">TÄHTI</text>
<text class="fr" x="259.4" y="466">ÉTOILE</text>
<text class="gu" x="259.4" y="466">તારો</text>
<text class="he" x="259.4" y="466">כוכב</text>
<text class="hi mr" x="259.4" y="466">तारा</text>
<text class="hr" x="259.4" y="466">ZVIJEZDA</text>
<text class="hu" x="259.4" y="466">CSILLAG</text>
<text class="id ms" x="259.4" y="466">BINTANG</text>
<text class="it" x="259.4" y="466">STELLA</text>
<text class="ja" x="259.4" y="466">星</text>
<text class="kk" x="259.4" y="466">ЖҰЛДЫЗ</text>
<text class="kn" x="259.4" y="466">ನಕ್ಷತ್ರ</text>
<text class="ko" x="259.4" y="466">별</text>
<text class="lt" x="259.4" y="466">ŽVAIGŽDĖ</text>
<text class="ml" x="259.4" y="466">നക്ഷത്രം</text>
<text class="nl" x="259.4" y="466">STER</text>
<text class="or" x="259.4" y="466">ତାରା</text>
<text class="pa" x="259.4" y="466">ਤਾਰਾ</text>
<text class="pl" x="259.4" y="466">GWIAZDA</text>
<text class="pt-BR pt-PT" x="259.4" y="466">ESTRELA</text>
<text class="ro" x="259.4" y="466">STEA</text>
<text class="sk" x="259.4" y="466">HVIEZDA</text>
<text class="sl" x="259.4" y="466">ZVEZDA</text>
<text class="sv" x="259.4" y="466">STJÄRNA</text>
<text class="ta" x="259.4" y="466">நட்சத்திரம்</text>
<text class="te" x="259.4" y="466">నక్షత్రం</text>
<text class="th" x="259.4" y="466">ดาว</text>
<text class="tr" x="259.4" y="466">YILDIZ</text>
<text class="uk" x="259.4" y="466">ЗІРКА</text>
<text class="ur" lang="ur" x="259.4" y="466">ستارہ</text>
<text class="vi" x="259.4" y="466">NGÔI SAO</text>
<text class="zh-Hans" x="259.4" y="466">星星</text>
<text class="zh-Hant" x="259.4" y="466">星星</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<path class="shadow-glyph" d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#0E0D22" stroke-width="19" stroke-linejoin="round" opacity="0.45" transform="translate(3,5)"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="url(#gold)" stroke-width="19" stroke-linejoin="round"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#FFF6DA" stroke-width="4.5" stroke-linejoin="round" opacity="0.4" transform="translate(-2,-3)"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
<use href="#caption" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(2,4)"/>
<use href="#caption" class="gold-text" fill="#CA9E41"/>
</svg>
```
In a set this SVG is the image's `svg` string (on one line, `"` written `\"`). The image's `name` and
`nameTranslations` carry the same words as the captions, in ordinary case ("Star", "Звезда", "Étoile", …).
Every picture of the set lists the same languages.
### 8c. The cover of the set in 8b
The same medallion with a question mark instead of the subject (section 2, "The cover"); in a set it gets
`"cover": true`. Two marks: `?`, and `؟` for Arabic and Urdu. A cover may show anything else the user asks
for; this one is what to draw when the user does not say.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme: the same rules as every picture of the set. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
/* Language. Two marks: "?" for every language, the Arabic question mark for Arabic and Urdu. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, ur) .default { display: none }
:lang(ar) .ar, :lang(ur) .ur
{ display: inline }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The question mark, where the other pictures have their subject. Drawn twice below: the
shadow, then the gold. The marks differ in shape (Arabic ؟ in Naskh, Urdu ؟ in Nastaliq), so
each has its own size and place: the same ink box as "?". -->
<g id="mark" class="caption" text-anchor="middle" font-family="system-ui, -apple-system, sans-serif" font-weight="bold">
<text class="default" x="258" y="323.8" font-size="323">?</text>
<text class="ar" lang="ar" x="254.2" y="329.6" font-size="294.1">؟</text>
<text class="ur" lang="ur" x="258.4" y="325.6" font-size="317.3">؟</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<use href="#mark" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(3,5)"/>
<use href="#mark" class="gold-text" fill="#E2C378"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
</svg>
```
### 8d. One SVG picture with theme colours (style sheet)
The plate takes the theme's surface colour, the moon the accent colour, soft in dark versions; the second
values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<style>
.plate { fill: var(--ic-surface, #dddddd) }
.moon { fill: var(--ic-accent, #e53935) }
.ic-dark .moon { fill: var(--ic-soft, #e53935) }
.cut { fill: var(--ic-surface, #dddddd) }
</style>
<rect class="plate" width="100" height="100" rx="12"/>
<circle class="moon" cx="46" cy="48" r="28"/>
<circle class="cut" cx="59" cy="39" r="23"/>
</svg>
```
### 8e. One SVG picture with theme colours (ids)
The plate takes the theme's surface colour, the house the text colour, the door the accent colour; the sun is
accent in light versions and soft in dark versions. The written `fill` values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<rect id="ic-surface" width="100" height="100" rx="12" fill="#eeeeee"/>
<g id="ic-text">
<path d="M16 52 L50 22 L84 52 Z" fill="#333333"/>
<rect x="26" y="52" width="48" height="30" fill="#333333"/>
</g>
<rect id="ic-accent" x="44" y="60" width="12" height="22" fill="#e53935"/>
<circle id="ic-light-accent-dark-soft" cx="82" cy="18" r="8" fill="#f9a825"/>
</svg>
```
### 8f. A small set with captions in three languages, and a cover
The user writes in English and asks for captions in English, German and Russian, and for a cover. The
default caption is the English word, so `en` is in no rule. Ordinary case, `sans-serif`, no letter-spacing;
the long Russian word has its own smaller size. Both pictures to guess have the same style sheet. The
cover's mark follows the app language, whatever the languages of the captions: `؟` in Arabic and Urdu, `?`
in every other. No theme rules: every picture has an opaque plate.
```json
{
"intuitionCheckSet": 1,
"name": "Simple shapes",
"nameTranslations": {"de": "Einfache Formen", "ru": "Простые фигуры"},
"images": [
{ "name": "Circle", "nameTranslations": {"de": "Kreis", "ru": "Круг"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"42\" r=\"28\" fill=\"#e53935\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Circle</text><text class=\"de\" x=\"50\" y=\"91\">Kreis</text><text class=\"ru\" x=\"50\" y=\"91\">Круг</text></g></svg>" },
{ "name": "Triangle", "nameTranslations": {"de": "Dreieck", "ru": "Треугольник"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 12 L82 70 L18 70 Z\" fill=\"#1565c0\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Triangle</text><text class=\"de\" x=\"50\" y=\"91\">Dreieck</text><text class=\"ru\" x=\"50\" y=\"91\" font-size=\"10.5\">Треугольник</text></g></svg>" },
{ "name": "Question mark", "nameTranslations": {"de": "Fragezeichen", "ru": "Знак вопроса"}, "cover": true, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(ar,ur) .default{display:none}:lang(ar) .ar,:lang(ur) .ur{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#eeeeee\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"system-ui, -apple-system, sans-serif\" font-weight=\"bold\" fill=\"#555555\"><text class=\"default\" x=\"50.4\" y=\"72.4\" font-size=\"64\">?</text><text class=\"ar\" lang=\"ar\" x=\"49.6\" y=\"73.7\" font-size=\"58\">؟</text><text class=\"ur\" lang=\"ur\" x=\"50.5\" y=\"72.8\" font-size=\"62.9\">؟</text></g></svg>" }
]
}
```
Cuprins
Ghiduri scurte despre principalele lucruri pe care le puteți face în Intuition Check și despre cum ne puteți contacta.
- Intuiția
- Cum funcționează aplicația
- Seturi de ghicit
- Trimiterea seturilor
- Joc cu partener
- Statistici
- Cum citiți rezultatele
- Starea dvs.
- Aspect și funcționalități
- Ora gratuită și abonamentul
- Datele dvs.
- Seturi proprii create cu AI
- Istoric versiuni
- Politică de confidențialitate
Dacă ceva nu funcționează
Scrieți‑ne la [email protected] și vă vom răspunde. Cel mai rapid este să folosiți Configurări → Informații → Contactați asistența: se deschide o ciornă în aplicația dvs. de e‑mail, cu versiunea și build‑ul aplicației, modelul dispozitivului și versiunea de iOS deja completate.
Nu există niciun formular de asistență și niciun sistem de tichete. Aplicația nu colectează nimic, așa că orice informație de care avem nevoie trebuie să vină de la dvs.
Ce să scrieți în mesaj
- Ce ați făcut, ce vă așteptați să se întâmple și ce s‑a întâmplat de fapt.
- Versiunea aplicației, din Configurări → Informații → Versiune.
- Modelul dispozitivului și versiunea de iOS.
O ciornă deschisă cu butonul „Contactați asistența” conține deja versiunea, modelul și versiunea de iOS.
Rezolvarea problemelor
- Cele două dispozitive nu se găsesc unul pe altul: Dacă dispozitivele nu se găsesc unul pe altul.
- Statisticile au dispărut după redeschiderea aplicației: Păstrarea statisticilor.
- Nu apare nimic în statistici: Ce se înregistrează.
- Un set lipsește din comutator: Comutatorul de seturi.
Surse
- Kahneman, D., & Klein, G. (2009). American Psychologist, 64(6), 515–526. Conditions for intuitive expertise: A failure to disagree [Condiții pentru competența intuitivă: un dezacord care nu a avut loc]
Un articol de sinteză scris împreună de doi cercetători de frunte ai intuiției, din școli opuse, în revista Asociației Americane de Psihologie.
https://doi.org/10.1037/a0016755 - Cardeña, E. (2018). American Psychologist, 73(5), 663–677. The experimental evidence for parapsychological phenomena: A review [Dovezile experimentale privind fenomenele parapsihologice: o sinteză]
O sinteză a multor studii, scrisă de un psiholog care consideră că dovezile sunt puternice, în revista Asociației Americane de Psihologie.
https://doi.org/10.1037/amp0000236 - Reber, A. S., & Alcock, J. E. (2020). American Psychologist, 75(3), 391–399. Searching for the impossible: Parapsychology's elusive quest [În căutarea imposibilului: ținta care îi scapă mereu parapsihologiei]
Răspunsul la sinteza de mai sus, scris de doi psihologi care resping astfel de fenomene, în aceeași revistă.
https://doi.org/10.1037/amp0000486 - Sheldrake, R. (2000). Journal of the Society for Psychical Research, 64, 224–232. Telepathic telephone calls: Two surveys [Apeluri telefonice telepatice: două sondaje]
Sondaje telefonice în gospodării alese la întâmplare din Londra și din Bury (Anglia), făcute de un cercetător care susține că telepatia există, într‑o revistă de parapsihologie.
https://www.sheldrake.org/files/pdfs/papers/Telepathic-Telephone-Calls-Two-Surveys.pdf - Brown, D. J., & Sheldrake, R. (2001). Journal of Parapsychology, 65, 145–156. The anticipation of telephone calls: A survey in California [Anticiparea apelurilor telefonice: un sondaj în California]
Un sondaj telefonic cu 200 de persoane alese la întâmplare, făcut de același cercetător împreună cu un coautor, într‑o revistă de parapsihologie.
https://www.sheldrake.org/files/pdfs/papers/The-Anticipation-of-Telephone-Calls-A-Survey-in-California.pdf - Cottrell, J. E., Winer, G. A., & Smith, M. C. (1996). Developmental Psychology, 32(1), 50–61. Beliefs of children and adults about feeling stares of unseen others [Convingerile copiilor și ale adulților despre posibilitatea de a simți privirea unor persoane nevăzute]
Trei studii cu copii și adulți, într‑o revistă a Asociației Americane de Psihologie.
https://doi.org/10.1037/0012-1649.32.1.50 - Born, J., Hansen, K., Marshall, L., Mölle, M., & Fehm, H. L. (1999). Nature, 397, 29–30. Timing the end of nocturnal sleep [Stabilirea momentului în care se încheie somnul nocturn]
Un experiment cu 15 voluntari, în revista Nature.
https://doi.org/10.1038/16166 - Sio, U. N., & Ormerod, T. C. (2009). Psychological Bulletin, 135(1), 94–120. Does incubation enhance problem solving? A meta-analytic review [Îmbunătățește incubația rezolvarea problemelor? O sinteză metaanalitică]
O sinteză care combină rezultatele multor experimente, într‑o revistă a Asociației Americane de Psihologie.
https://doi.org/10.1037/a0014212 - Wagner, U., Gais, S., Haider, H., Verleger, R., & Born, J. (2004). Nature, 427, 352–355. Sleep inspires insight [Somnul inspiră iluminarea]
Un experiment din revista Nature; încercările ulterioare de a‑l repeta au dat rezultate mixte.
https://doi.org/10.1038/nature02223 - Ambady, N., & Rosenthal, R. (1993). Journal of Personality and Social Psychology, 64(3), 431–441. Half a minute: Predicting teacher evaluations from thin slices of nonverbal behavior and physical attractiveness [O jumătate de minut: prezicerea evaluărilor profesorilor pe baza unor fragmente scurte de comportament nonverbal și a atractivității fizice]
Trei studii – principalul dintre ele cu 13 profesori – într‑o revistă a Asociației Americane de Psihologie.
https://doi.org/10.1037/0022-3514.64.3.431 - Diaconis, P., & Mosteller, F. (1989). Journal of the American Statistical Association, 84(408), 853–861. Methods for studying coincidences [Metode pentru studierea coincidențelor]
Un articol scris de doi statisticieni despre felul în care apar coincidențele, în revista Asociației Americane de Statistică.
https://doi.org/10.1080/01621459.1989.10478847 - Wilson, T. D., Lisle, D. J., Schooler, J. W., Hodges, S. D., Klaaren, K. J., & LaFleur, S. J. (1993). Personality and Social Psychology Bulletin, 19(3), 331–339. Introspecting about reasons can reduce post-choice satisfaction [Introspecția asupra motivelor poate reduce satisfacția de după alegere]
Un experiment, într‑o revistă de psihologie socială.
https://doi.org/10.1177/0146167293193010 - Dunn, B. D., Galton, H. C., Morgan, R., Evans, D., Oliver, C., Meyer, M., Cusack, R., Lawrence, A. D., & Dalgleish, T. (2010). Psychological Science, 21(12), 1835–1844. Listening to your heart: How interoception shapes emotion experience and intuitive decision making [Ascultarea propriei inimi: cum modelează interocepția trăirea emoțiilor și luarea deciziilor intuitive]
Două experimente, într‑o revistă a Asociației pentru Știința Psihologică.
https://doi.org/10.1177/0956797610389191
Autori
Ilustrațiile cărților de joc: Adrian Kennard, publicate sub CC0 Public Domain. Generatorul și codul sursă: me.uk/cards.