Intuition Check
Un’app semplice e che rispetta la tua privacy, per mettere alla prova e allenare la tua intuizione, su iPhone, iPad e Mac con chip Apple. Esercita il tuo istinto con carte da gioco, numeri o immagini — in solitaria o con un partner nelle vicinanze.
Scarica su App Store → I tuoi set creati con l’IA →Intuizione
Che cos’è l’intuizione
L’intuizione è sapere qualcosa senza riuscire a dire come lo sai: un presentimento, una sensazione di pancia, una certezza improvvisa.
Gli psicologi ne descrivono bene un tipo — l’esperienza che lavora più in fretta del pensiero. Chi ha fatto una cosa molte volte si accorge di una regolarità prima di riuscire a spiegarla a parole: prima arriva la sensazione, poi le parole.1
Molte persone descrivono anche un secondo tipo: sapere qualcosa che nessuna esperienza avrebbe potuto suggerire — chi sta chiamando prima che il telefono mostri un nome, o quale carta da gioco è coperta. Nella scienza si discute se questo tipo esista.23 È proprio questo secondo tipo che l’app ti permette di mettere alla prova, con valori scelti a caso.
Come può farsi sentire
Molte persone conoscono momenti come questi:
- Pensi a qualcuno e un attimo dopo ti chiama.
- Prendi il telefono per chiamare un amico e ti squilla in mano — è proprio quell’amico.
- Ti svegli un paio di minuti prima che suoni la sveglia.
- Sai chi ti sta chiamando prima di guardare lo schermo.
- Ti torna in mente una persona che non vedi da molto tempo, e ti chiama quello stesso giorno.
- La tua prima impressione su una persona si rivela giusta.
- La soluzione di un problema arriva da sola — al mattino, sotto la doccia, durante una passeggiata.
- Senti uno sguardo addosso, ti giri, e qualcuno ti sta davvero guardando.
In sondaggi telefonici su persone scelte a caso in Inghilterra e in California, tra il 65% e il 78% ha detto di aver chiamato qualcuno che ha risposto: “Stavo proprio per chiamarti”, e il 47–49% ha detto di aver saputo chi stava chiamando senza alcun indizio.45 La maggior parte degli adulti crede di poter sentire lo sguardo di qualcuno senza vederlo.6
Alcuni di questi casi hanno una spiegazione nota. Il corpo può tenere traccia dell’ora in cui ti aspetti di svegliarti: in un esperimento, un ormone che prepara il corpo al risveglio ha cominciato ad aumentare circa un’ora prima dell’orario di sveglia che era stato comunicato alle persone.7 Una pausa può aiutare a risolvere un problema: in molti esperimenti, le persone risolvevano meglio i problemi dopo averli messi da parte per un po’,8 e in uno studio una notte di sonno ha più che raddoppiato la percentuale di persone che hanno scoperto una regola nascosta che permetteva di risolvere un compito più in fretta.9 E una prima impressione può essere accurata: degli sconosciuti che avevano guardato un insegnante per 30 secondi in tutto, senza audio, gli hanno dato giudizi molto simili a quelli dei suoi studenti a fine semestre.10
Una volta, due volte — o più e più volte
Una volta o due, una coincidenza del genere è facile da attribuire al caso. Quando si ripete più e più volte, è naturale chiedersi se dietro non ci sia qualcosa di più.
Qui la memoria tiene male il conto. Ricorda le volte in cui il telefono ha squillato e dimentica le tante volte in cui hai pensato a qualcuno e non è successo nulla. E con abbastanza giorni, persone e pensieri, è inevitabile che di tanto in tanto capitino coincidenze sorprendenti.11
Per questo è utile contare. In questa app si sa esattamente quanto è probabile indovinare per caso: dipende solo da quanti valori possono essere estratti. Le statistiche mostrano se i tuoi risultati restano entro ciò che darebbe il caso o se ne discostano — vedi Come leggere i risultati.
L’intuizione nella vita di tutti i giorni
Le sensazioni e i segnali del corpo entrano in gioco in molte decisioni. Tre settimane dopo, le persone che avevano semplicemente scelto il poster che piaceva loro ne erano più soddisfatte di quelle a cui era stato chiesto prima di elencare i motivi per cui ogni poster piaceva o non piaceva loro.12 In un altro esperimento, alcune persone hanno fatto un gioco di carte con quattro mazzi: alla lunga due mazzi facevano vincere e due facevano perdere, ma ai giocatori non veniva detto quali. Il corpo reagiva prima di ogni pescata, e in persone diverse questi segnali pendevano da parti diverse: nel complesso, per alcuni verso i mazzi vincenti e per altri verso quelli perdenti. I ricercatori hanno valutato quanto bene ogni persona percepisse i segnali del proprio corpo in base alla precisione con cui riusciva a sentire il proprio battito cardiaco. Più quella percezione era precisa, più le scelte della persona seguivano da vicino i segnali del corpo — nel bene e nel male.13
L’intuizione è più affidabile dove ci sono regolarità reali su cui contare e un riscontro rapido e chiaro. Una forte sensazione di certezza non è, di per sé, un segno di avere ragione.1
Quindi essere in buona sintonia con la tua intuizione significa due cose: notarla e imparare quando puoi fidartene. Per imparare quando puoi fidartene, annota il tuo stato mentre giochi: le statistiche confrontano poi i tuoi round per stato e per fascia oraria, così puoi vedere quando ti va meglio. Vedi Il tuo stato.
C’è qualcosa di più?
La scienza non ha stabilito se le persone possano sapere ciò che nessuna esperienza potrebbe suggerire loro. Nel 2018 una rassegna pubblicata sulla principale rivista dell’Associazione americana di psicologia ha concluso che le prove a favore di effetti di questo tipo sono solide all’incirca quanto quelle a favore di risultati accettati in psicologia.2 Una replica sulla stessa rivista ha sostenuto che effetti di questo tipo sono impossibili e che i risultati devono avere altre cause.3 La questione resta aperta, e l’app ti permette di esaminarla con i tuoi round.
Come funziona l’app
Un round
Scegli un set da indovinare — carte da gioco, numeri o un set di immagini — e prova a percepire un valore prima che venga mostrato. Poi rivelalo e guarda se avevi ragione. L’app conta i tuoi successi e li confronta con ciò che darebbe il puro caso.
Modalità passiva e attiva
L’app ha due modalità:
- Intuizione passiva — il valore è già stato scelto ed è nascosto. Provi a leggere qual è.
- Intuizione attiva — nulla viene scelto finché non riveli il valore. Provi a far apparire un valore con la volontà.
Le statistiche tengono separate le due modalità, così puoi vedere quale delle due ti si addice di più.
Tre modi di giocare
Con i selettori in alto nella vista principale scegli lo stile di gioco e la modalità. Le stesse scelte si trovano in Impostazioni → Stile di gioco e modalità.
Uno alla volta
Un valore alla volta. Tocca per rivelarlo, tocca di nuovo per nasconderlo, poi rivela il successivo. Con l’opzione “Rivela senza nascondere” attiva in Impostazioni → Uno alla volta, ogni tocco mostra subito il valore successivo. L’opzione “Mostra il suggerimento” aggiunge sotto il valore una riga con un suggerimento.
Quando nella registrazione delle risposte l’opzione “Metodo” è impostata su “Inserisci la tua risposta” — l’impostazione di default — prima di ogni rivelazione l’app ti chiede la tua risposta e segna da sola l’esito del round. Vedi Che cosa viene registrato.
Scelta rapida
Tutti i valori del set sono disposti in un’unica griglia. Ogni tocco è un round a sé. In modalità attiva il valore viene estratto nel momento in cui tocchi; in modalità passiva viene estratto in anticipo, subito dopo il tuo tocco precedente. Un successo può essere segnalato da un lampo verde e da una vibrazione.
I set di numeri con più di 1000 valori non hanno la griglia: restringi l’intervallo nelle impostazioni del set, oppure gioca nello stile “Uno alla volta”.
Serie
In modalità attiva, scegli il valore che vuoi, concentra su di esso la tua volontà e toccalo: l’app estrae una serie di valori e conta quanti di essi corrispondono a quello che hai toccato. Una serie può essere lunga da 2 a 12 estrazioni, oppure 100, 1000, 10.000, 100.000, 1 milione o 10 milioni. Imposti la lunghezza nella vista principale. In Impostazioni → Serie, il cursore “Durata della serie” distribuisce le estrazioni su un massimo di 10 secondi; a zero non ci sono pause. Ogni serie entra nelle statistiche come una sola voce.
Scegliendo lo stile “Serie” si passa alla modalità attiva.
Carte da gioco e numeri
Un set di carte da gioco usa un mazzo di 36 o 52 carte, con o senza jolly. Un set di numeri usa numeri fino a 9 cifre — il numero massimo di cifre lo scegli tu. Entrambe le cose si impostano nella vista delle impostazioni del set da indovinare: nella vista principale, tocca l’ingranaggio accanto al selettore dei set.
Vista pulita
Tieni premuto un punto qualsiasi della vista principale per nascondere i selettori, la barra degli strumenti, la barra degli stati e il suggerimento. Tieni premuto di nuovo per farli ricomparire. I contatori dei round e il risultato restano visibili.
In Impostazioni → Aspetto e feedback, alla voce “Vista pulita”, “Mostra il pulsante” aggiunge alla barra degli strumenti un pulsante con l’occhio — toccalo per attivare la vista pulita — e “Ricorda la vista pulita” mantiene attiva la vista pulita tra un avvio e l’altro.
Contatori dei round
La vista principale può mostrare quanti round hai giocato e come stai andando: un contatore e un risultato per ogni combinazione di modalità e stile di gioco, con un pulsante che azzera il contatore e cancella il risultato. Anche passare a un altro set da indovinare azzera tutti i contatori e cancella tutti i risultati.
Per conservare i contatori dei round e i risultati tra un avvio e l’altro, attiva “Salva i contatori dei round e i risultati” in Impostazioni → Statistiche. È disponibile quando è attiva l’opzione “Salva le statistiche sul dispositivo”.
Set da indovinare
Un set da indovinare è ciò con cui giochi a indovinare: carte da gioco, numeri o un set di immagini. All’inizio la vista principale mostra solo “Numeri” e “Carte da gioco”. Puoi aggiungere gli altri set inclusi nell’app toccando accanto al selettore dei set nella vista principale.
Il selettore dei set
Il selettore in alto nella vista principale mostra i tuoi set da indovinare. Con l’impostazione di default di “Stile del selettore”, mostra dei pulsanti se ha uno o due set da mostrare e, da tre in su, il nome del set attuale, che apre un elenco dei set. Se in “Stile del selettore” scegli “Vista separata”, il selettore apre sempre questo elenco.
Ogni set ha il proprio interruttore “Usa”. Un set con questo interruttore disattivato non viene proposto da nessuna parte — né nel selettore dei set nella vista principale, né nel gioco con un partner, né nelle statistiche — ma resta nel tuo elenco di set in Impostazioni → Set da indovinare → Gestisci i set da indovinare, e riattivandolo tornano anche le sue statistiche.
Il pulsante accanto al selettore dei set apre la vista “Aggiungi un set”. Elenca gli altri set inclusi nell’app, pronti da aggiungere alla vista principale; sotto di essi ci sono un pulsante per creare un set vuoto, a cui puoi aggiungere in seguito le tue immagini, e la sezione “Il tuo assistente IA” per aggiungere un set creato da un assistente IA. Il pulsante a forma di ingranaggio accanto al selettore dei set apre le impostazioni del set attualmente selezionato. Entrambi i pulsanti si possono nascondere in Impostazioni → Set da indovinare con “Mostra il pulsante per aggiungere un set” e “Mostra il pulsante delle impostazioni del set”.
Set pronti
Tocca accanto al selettore dei set nella vista principale — oppure apri Impostazioni → Set da indovinare → Gestisci i set da indovinare, tocca e scegli “Set pronti”. Apri un set e tocca “Aggiungi ai miei set da indovinare”.
Il set che aggiungi è una tua copia personale: puoi rinominarlo, cambiare l’ordine delle immagini, escluderne alcune dal gioco, giocarci con un partner o inviarlo a qualcuno.
Un set con le tue immagini
Dalla vista principale: tocca accanto al selettore, poi “Set di immagini vuoto” sotto i set pronti. Lascia il nome “Le mie immagini” o scrivine un altro e tocca “Crea”. L’app passa al nuovo set e lo apre.
Oppure apri Impostazioni → Set da indovinare → Gestisci i set da indovinare, tocca e scegli “Set di immagini vuoto”, poi dai un nome al set e tocca “Crea”. Il nuovo set si apre.
Nel set, tocca e aggiungi immagini da “Foto” o “File” — anche più di una alla volta — scattale una per volta con “Fotocamera” oppure, con “Incolla dagli appunti”, incolla un’immagine o un SVG che hai copiato.
Nomi delle immagini
Tocca un’immagine nella vista del set per vederla più grande. Il suo “Nome” è il campo sotto l’immagine: scrivine uno, cambialo o cancellalo. Un’immagine aggiunta da “File” parte con il nome del file senza estensione; una aggiunta da “Foto”, con “Fotocamera” o con “Incolla dagli appunti” parte senza nome. In un set con nomi in più lingue, “Nomi per lingua” sotto il campo contiene il nome dell’immagine in ciascuna di esse. Sotto l’immagine vedi il formato e la dimensione del file che l’app conserva.
Un assistente IA può creare per te immagini e interi set: I tuoi set creati con l’IA.
Ordine, disposizione e immagini in gioco
Nella vista del set, “Disponi” ti permette di trascinare le immagini in un nuovo ordine e di scegliere “Immagini per riga”, “Allineamento” e “Mostra per intero” per la griglia.
Tieni premuta un’immagine per altre azioni:
- “Non usare nel gioco” lascia l’immagine nel set, ma questa non viene mai estratta. “Usa nel gioco” la rimette in gioco.
- L’opzione Usa come segnaposto “?” mostra quell’immagine mentre, nello stile “Uno alla volta”, un valore è ancora nascosto. Questa immagine non viene mai estratta. Un set può avere un solo segnaposto “?”.
Rinominare ed eliminare
Il nome del set è il primo campo nella sua vista. Nei set pronti, modificarlo cambia il nome nella lingua attuale dell’app; i nomi nelle altre lingue si trovano in “Nomi per lingua”.
Per eliminare un set, scorri sul set nel tuo elenco di set in Impostazioni → Set da indovinare → Gestisci i set da indovinare oppure tienilo premuto, e scegli “Elimina”. L’app chiede prima una conferma. Insieme al set vengono eliminate anche le sue statistiche.
Inviare i set
Inviare un set
Un set con le tue immagini può viaggiare come un unico file con estensione .guesset. Il file contiene le immagini, il loro ordine, la disposizione e i nomi del set, oltre a quali immagini sono in gioco e qual è il segnaposto “?”. I set “Carte da gioco” e “Numeri” sono integrati nell’app e non si possono inviare.
- Apri Impostazioni → Set da indovinare → Gestisci i set da indovinare.
- Tieni premuto il set e scegli “Esporta…”. Il pulsante di condivisione all’interno del set fa la stessa cosa.
- Scegli come inviarlo: Mail, Messaggi, AirDrop, l’app File o un’altra app.
Per giocare con un set insieme a qualcuno nelle vicinanze non serve un file: vedi Giocare con le tue immagini.
Aprire un set che ti hanno inviato
Tocca un file .guesset in Mail, in Messaggi o nell’app File, oppure accettane uno inviato tramite AirDrop, e aprilo con Intuition Check. Diventa una tua copia separata e compare in fondo al tuo elenco e nel selettore.
Un file già salvato sul dispositivo si può importare anche dall’interno dell’app: in Impostazioni → Set da indovinare → Gestisci i set da indovinare, tocca e scegli “Importa da file”.
Gioco con un partner
Come funziona
Due dispositivi giocano insieme: una persona sceglie un valore, l’altra prova a indovinarlo. I dispositivi comunicano solo tra loro (da dispositivo a dispositivo quando sono vicini, oppure tramite una rete Wi‑Fi condivisa). I round del gioco con un partner non vengono inclusi nelle statistiche.
La connessione
Attiva il Wi‑Fi su entrambi i dispositivi. Sulla stessa rete Wi‑Fi la connessione funziona meglio, e in quel caso i dispositivi possono trovarsi in qualsiasi punto della rete. Senza una rete in comune si collegano da dispositivo a dispositivo — tienili vicini.
I dispositivi si cercano a vicenda solo mentre il gioco con un partner è aperto su entrambi.
Per iniziare
- Su entrambi i dispositivi, apri il gioco con un partner: tocca il pulsante con le due persone nella barra degli strumenti della vista principale, oppure tocca “Apri il gioco con un partner” in Impostazioni → Gioco con un partner. Se il pulsante non c’è, attiva “Mostra il pulsante del gioco con un partner” in Impostazioni → Gioco con un partner.
- Ogni dispositivo mostra “Cerco un partner nelle vicinanze…” e poi l’altro dispositivo sotto “Nelle vicinanze:”. Si collegano automaticamente.
La prima volta, il tuo dispositivo chiede se l’app può trovare dispositivi sulla tua rete locale. Consentilo: senza questo permesso i dispositivi non possono trovarsi a vicenda.
Un round
- Alla voce “Gioca con:” scegli con che cosa giocare — uno qualsiasi dei tuoi set da indovinare in uso.
- Scegli un ruolo: “Scelgo una carta” (o un numero, o un’immagine) oppure “Provo a indovinare”. L’altro ruolo va al partner.
- Chi sceglie seleziona un valore, chi prova a indovinare dà la sua risposta. Poi entrambi i dispositivi mostrano il valore scelto e quello dato come risposta, con “Esatto!” o “Stavolta no”.
- “Gioca di nuovo” riporta entrambi i dispositivi al primo passaggio, per scegliere con che cosa giocare e i ruoli del round successivo.
Giocare con le tue immagini
Quando giochi con uno dei tuoi set di immagini, al partner viene chiesto innanzitutto di toccare “Scarica”, a meno che non abbia già lo stesso set. La sua copia viene usata solo nel gioco con un partner e non modifica mai i suoi set. Vengono inviate solo le immagini che ancora non ha.
Con l’interruttore “Conserva i set di immagini ricevuti” attivo in Impostazioni → Gioco con un partner, la partita successiva con lo stesso partner inizia senza attese. Con l’interruttore disattivato, i set ricevuti vengono eliminati quando esci dal gioco con un partner. I set ricevuti sono elencati in Impostazioni → Set da indovinare → Gestisci i set da indovinare, nella sezione “Ricevuti dal partner”, dove “Aggiungi ai miei set da indovinare” crea una copia che è interamente tua.
Il nome del partner
Su iPhone e iPad le app vedono solo un nome generico del dispositivo, come “iPhone”, quindi due dispositivi possono sembrare uguali. Una volta stabilita la connessione, tocca la matita accanto al nome del partner e scrivi un nome a tua scelta. Questo nome compare solo sul tuo dispositivo.
Se i dispositivi non si trovano a vicenda
- Apri il gioco con un partner su entrambi i dispositivi, con il Wi‑Fi attivo.
- Se puoi, connetti entrambi i dispositivi alla stessa rete Wi‑Fi; altrimenti tienili vicini.
- Le reti per gli ospiti e le reti pubbliche — negli hotel, nei bar, negli uffici — spesso bloccano il traffico tra dispositivi. Prova con un’altra rete, oppure senza alcuna rete, con i dispositivi uno accanto all’altro.
- Se hai rifiutato la richiesta di accesso alla rete locale, riattiva l’accesso nell’app Impostazioni: Privacy e sicurezza → Rete locale, poi attiva Intuition Check.
- Se un dispositivo compare sotto “Nelle vicinanze:” ma non si collega mai, esci dal gioco con un partner su entrambi i dispositivi e riaprilo: la ricerca ricomincia da capo.
- Giocano insieme solo due dispositivi alla volta. Un terzo continua a cercare finché uno dei due non esce dal gioco.
Statistiche
Che cosa viene registrato
Gli stili “Scelta rapida” e “Serie” registrano sempre i tuoi round. Lo stile “Uno alla volta” li registra in base all’impostazione “Metodo” nella sezione “Registrazione delle risposte” di Impostazioni → Uno alla volta:
- “Inserisci la tua risposta” — l’opzione di default. Scegli la tua risposta prima della rivelazione e l’app valuta il round.
- “Segna a mano” — dopo ogni rivelazione, tocca ✓ o ✗. Una rivelazione che salti senza segnarla non viene contata.
- “No” — lo stile “Uno alla volta” non registra nulla.
Un set da indovinare con un solo valore possibile non registra nulla. I round del gioco con un partner non vengono mai registrati.
Consultare le statistiche
Tocca il pulsante delle statistiche nella barra degli strumenti della vista principale, oppure tocca “Visualizza le statistiche” in Impostazioni → Statistiche. Le statistiche si aprono per il set da indovinare, lo stile di gioco e la modalità con cui stai giocando. I filtri in alto le restringono per “Periodo”, “Set da indovinare”, “Stile di gioco”, “Modalità” e — mentre annoti il tuo stato — “Stato”.
Le sezioni che non ti servono si possono disattivare nella vista delle impostazioni delle statistiche — aprila con il pulsante delle impostazioni nella vista delle statistiche, oppure dalla vista principale tramite Impostazioni → Statistiche.
Che cosa significano i numeri: Come leggere i risultati.
Conservare le statistiche
Inizialmente le statistiche vengono conservate solo in memoria, per la sessione corrente: vengono cancellate quando l’app si chiude, anche quando è iOS a chiuderla in background. Per conservarle, attiva “Salva le statistiche sul dispositivo” — in cima alla vista delle statistiche o in Impostazioni → Statistiche. Vengono salvati anche i round della sessione corrente. I round delle sessioni precedenti dell’app che non sono mai stati salvati non si possono recuperare.
Disattivare l’interruttore elimina le statistiche salvate. Prima l’app chiede conferma con “Vuoi smettere di salvare le statistiche?”; dopo che hai toccato “Elimina le statistiche salvate”, restano solo i round giocati dall’ultima apertura dell’app, e solo in memoria: spariscono quando l’app viene chiusa. L’azione è irreversibile.
Cancellazione
In fondo alla vista delle statistiche:
- Cancella tutte le statistiche di “…” — tutte le statistiche registrate con il set da indovinare scelto nel filtro.
- “Elimina i record filtrati delle statistiche (numero: …)” — solo i record mostrati dai filtri.
- “Cancella tutte le statistiche” — tutto.
L’app ti chiede di confermare ciascuna di queste eliminazioni, e tutte sono irreversibili.
Esportazione
Tocca il pulsante di condivisione nella barra degli strumenti della vista delle statistiche, poi “Esporta le statistiche in un file di testo”. Il file è una tabella (CSV) con esattamente i record mostrati dai tuoi filtri: una riga per ogni round oppure, nello stile di gioco “Serie”, una per ogni serie. Le app per fogli di calcolo come Numbers possono aprirlo. Potresti anche trovare utile mostrare questo file al tuo assistente IA e chiedere, per esempio: “In quali circostanze la mia intuizione sembra funzionare meglio o peggio?”
Come leggere i risultati
Le statistiche non si limitano a contare i successi. Confrontano i tuoi risultati con quelli che si otterrebbero indovinando a caso con lo stesso numero di valori possibili, e ti dicono in parole semplici se sei sopra il caso, sotto il caso o in linea con esso.
Il tuo risultato e il caso
Nella sezione “Risposte esatte”, “Il tuo risultato” compare accanto a “Il caso otterrebbe”. Lo stesso 30% può significare cose opposte: con 3 valori possibili, indovinando a caso si ottiene circa il 33%, quindi il 30% è un po’ sotto il caso; con un mazzo da 52 carte si ottiene circa il 2%, quindi il 30% è molto sopra il caso. La percentuale attesa per caso si basa sul numero di valori possibili di ciascun round.
Il verdetto
L’app dà un verdetto: da “In linea con il caso”, passando per leggermente e nettamente sopra o sotto il caso, fino a “Molto sopra il caso” o “Molto sotto il caso”. Dice anche quanto sarebbe raro un risultato del genere indovinando a caso, per esempio “circa 1 volta su 300”.
Su pochi round i risultati oscillano molto per effetto del solo caso. Per questo il verdetto diventa più stabile a ogni nuovo round.
Intuizione passiva e attiva a confronto
Quando hai round in entrambe le modalità, la sezione “Intuizione passiva e attiva” mostra i successi e la percentuale di successo di ciascuna, così puoi vedere quale ti si addice di più. Nello stile “Serie” questa sezione non compare.
Migliori sequenze
La sezione “Migliori sequenze” elenca le tue sequenze più lunghe di risposte esatte di fila, con il giorno, l’ora e lo stato che avevi annotato. Una pausa più lunga dell’impostazione “Pausa max tra i round” — che regoli in quella stessa sezione — interrompe una sequenza, così come un cambio del tuo stato annotato.
Nel tempo
La sezione “Percentuale di successo nel tempo” traccia la tua percentuale di successo giornaliera non appena hai round in due giorni diversi. La sezione “Per fascia oraria” mostra separatamente mattina, pomeriggio, sera e notte.
Valori
Quando le statistiche riguardano un solo set da indovinare con al massimo 100 valori, elencano i valori che hai indovinato più spesso e quelli che scegli come risposta più spesso e più di rado — compresi i valori che non scegli mai, una volta che hai dato tante risposte quanti sono i valori del set.
Spesso le persone tendono a preferire alcuni valori e a evitarne altri, e alcuni valori possono venire indovinati più spesso di altri.
I risultati possono cambiare
I tuoi risultati possono cambiare con il tuo stato e con le tue circostanze. Nessuna delle cose che seguono è un fatto accertato — sono possibilità che vale la pena notare mentre giochi:
- Il tuo stato. Potresti ottenere risultati diversi subito dopo il risveglio o a tarda notte, con il vigore o la stanchezza, con la calma o lo stress. Annota il tuo stato mentre giochi, e le statistiche confrontano i tuoi round per stato e per fascia oraria.
- Fiducia in sé. La sicurezza di sé, o al contrario un forte dubbio, potrebbe andare di pari passo con i tuoi risultati.
- Anche un risultato sotto il caso conta. Dare risposte esatte sensibilmente meno spesso di quanto prevedrebbe il caso è anch’esso uno scostamento dal caso. Una possibile lettura è che in quel momento l’intuizione stia lavorando contro di te, e non che non stia succedendo nulla.
- Valori. Potresti indovinare alcuni valori molto più spesso di altri, e alcuni potresti non indovinarli mai, anche se li scegli altrettanto spesso degli altri.
Che cosa possono dire i numeri
L’app può dirti se i tuoi risultati si discostano dal puro caso — mai il perché, anche quando il motivo sembra evidente dai dati. Considera i numeri come qualcosa da esplorare, non come una misura fissa di te. Vedi anche Intuizione.
Il tuo stato
La barra degli stati
La barra nella vista principale ti permette di annotare come stai in questo momento: “Vigore” o “Stanchezza”, “Calma” o “Stress”, “Sicurezza” o “Dubbio”, “Concentrazione” o “Distrazione”, il tuo umore e circostanze come “Al risveglio”, “Dopo il caffè” o “Dopo l’allenamento”. Ciò che annoti viene registrato insieme a ogni round che giochi da quel momento in poi, finché non lo cambi o non viene dimenticato.
In questo modo le statistiche confrontano i tuoi round per stato e per fascia oraria, e ogni sequenza mostra lo stato che avevi annotato. Vedi I risultati possono cambiare.
Quando viene dimenticato
Lo stabilisce l’opzione “Reimposta lo stato annotato” in Impostazioni → Il tuo stato:
- “All’avvio dell’app” — l’opzione di default. Al prossimo avvio non c’è nessuno stato annotato.
- “Dopo una pausa” — lo stato viene dimenticato se non giochi per il tempo che scegli in “Pausa”, da 15 minuti a 1 giorno.
- “Mai” — lo stato resta finché non lo cambi.
I tuoi stati
In Impostazioni → Il tuo stato → Gestisci gli stati puoi rinominare, riordinare, aggiungere e nascondere gli stati, aggiungere assi tuoi e disattivare un asse con il suo interruttore “Usa”: un asse disattivato esce dalla barra degli stati, i nuovi round non lo registrano e le statistiche lo escludono.
Per togliere del tutto la barra, disattiva “Annota il tuo stato durante i round”; così non viene registrato nessuno stato.
La barra è nascosta quando la vista pulita è attiva e, nello stile “Uno alla volta”, quando la registrazione delle risposte è disattivata.
Aspetto e funzionalità
Temi
In Impostazioni → Aspetto e feedback ci sono quattro temi — “Sabbia”, “Oceano”, “Foresta” e “Crepuscolo” —, ognuno con una versione chiara e una scura. In “Aspetto” puoi scegliere “Chiaro”, “Scuro” o “Sistema”; con “Sistema” l’app segue l’impostazione del tuo dispositivo e cambia insieme a essa. Il tema colora anche le carte da gioco e la maggior parte delle immagini dei set pronti.
Feedback
Alla voce “Segnale di successo”, gli interruttori “Vibrazione” e “Animazione” segnalano una risposta esatta con una vibrazione e un lampo verde; ciascuno dei due si può disattivare. Funzionano nello stile “Scelta rapida” a ogni tocco, nello stile “Serie” quando ogni estrazione di una serie è un successo e nello stile “Uno alla volta” quando inserisci la tua risposta prima della rivelazione. Una risposta sbagliata non fa scattare né la vibrazione né il lampo. Per la vibrazione serve anche che l’opzione “Feedback aptici di sistema” sia attiva nell’app Impostazioni, in “Suoni e feedback aptico”.
“Animazione di pulsazione al tocco” fa pulsare brevemente la cella che tocchi negli stili “Scelta rapida” e “Serie”, e il valore che riveli nello stile “Uno alla volta” quando segni i round a mano o non li registri.
Una vista principale sgombra
Quasi tutto ciò che compare nella vista principale si può nascondere. Ogni interruttore si trova nella vista di Impostazioni a cui appartiene:
- Impostazioni → Stile di gioco e modalità: due interruttori “Mostra il selettore”, uno per lo stile di gioco e uno per la modalità.
- Impostazioni → Set da indovinare: “Mostra il selettore”, “Mostra il pulsante per aggiungere un set”, “Mostra il pulsante delle impostazioni del set”.
- Impostazioni → Scelta rapida: “Mostra il pulsante delle opzioni della griglia”.
- Impostazioni → Uno alla volta: “Mostra il suggerimento”.
- Impostazioni → Serie: “Mostra la lunghezza della serie nella vista principale”, “Mostra la durata della serie nella vista principale”, “Mostra il pulsante delle opzioni della griglia” (lo stesso interruttore di Impostazioni → Scelta rapida).
- Impostazioni → Il tuo stato: “Annota il tuo stato durante i round”.
- Impostazioni → Statistiche: “Mostra il pulsante delle statistiche”.
- Impostazioni → Gioco con un partner: “Mostra il pulsante del gioco con un partner”.
- Le impostazioni di ogni stile di gioco (“Scelta rapida”, “Uno alla volta”, “Serie”): “Mostra il numero di round giocati”, Mostra l’interruttore “Risultati”, “Mostra il risultato”.
Per togliere un singolo set da indovinare dal selettore, disattiva “Usa” nelle impostazioni di quel set; il set esce allora anche dal gioco con un partner e dalle statistiche. Attivando la vista pulita si nasconde in un colpo solo la maggior parte degli elementi della vista principale.
Funzionalità
In Impostazioni → Funzionalità c’è un interruttore per Stile di gioco “Serie” e uno per “Contatori dei round e risultati nella vista principale”. Una funzionalità disattivata scompare dalla vista principale e da Impostazioni.
Lingua
In Impostazioni → Lingua puoi impostare la lingua dell’app indipendentemente da quella del tuo dispositivo; la stessa impostazione stabilisce come vengono scritti i numeri e le date. Sotto “Lingue suggerite” l’elenco mostra per prima la lingua di sistema, poi ciascuna delle lingue del tuo dispositivo che l’app offre, nell’ordine impostato sul tuo dispositivo; tutte le altre lingue seguono sotto “Altre lingue”. Se la nuova lingua si legge nella direzione opposta, dopo il cambio chiudi l’app e riaprila (la direzione della scrittura cambia correttamente solo dopo un riavvio).
Sotto la riga “Lingua” in Impostazioni c’è l’interruttore “Mostra i suggerimenti in Impostazioni”, che mostra o nasconde le spiegazioni sotto le impostazioni.
Ora gratuita e abbonamento
L’ora gratuita
L’app si scarica gratis e include un’ora di tempo nell’app per provare tutto ciò che contiene. L’ora viene conteggiata solo mentre l’app è aperta sullo schermo e si somma su tutte le tue sessioni — mentre l’app è chiusa o in background, il tempo non viene conteggiato.
Quando hai esaurito l’ora, la vista dell’abbonamento si apre da sola. Se il tempo non ti è bastato per decidere se abbonarti, puoi prenderne altro: “Ripristina l’ora gratuita” ti dà un’altra ora, fino a 3 volte — in tutto 4 ore di tempo gratuito.
L’abbonamento
Per continuare a usare l’app dopo quel tempo, c’è un abbonamento con due piani, “Mensile” e “Annuale”. L’abbonamento si può condividere tramite “In famiglia”.
Abbonarsi
Apri Impostazioni → Abbonamento → Abbonati.
Gestire o annullare
Gli abbonamenti vengono addebitati da Apple. Impostazioni → Abbonamento → Gestisci abbonamento ti porta al tuo abbonamento. L’abbonamento dell’app si può gestire anche nel modo standard, tra gli abbonamenti del tuo Apple Account nelle impostazioni del dispositivo. L’annullamento di un abbonamento interrompe i futuri rinnovi automatici, ma mantieni l’accesso fino alla fine del periodo in corso.
Chi ha il piano mensile può passare a quello annuale con Impostazioni → Abbonamento → Passa al piano annuale.
Rimborsi
I rimborsi sono gestiti da Apple: puoi richiederne uno su reportaproblem.apple.com. Non abbiamo accesso ai tuoi dati di pagamento e non possiamo emettere un rimborso noi stessi — ma scrivi anche a noi se qualcosa è andato storto, perché è l’unico modo in cui lo veniamo a sapere.
Ripristinare un acquisto
Su un nuovo dispositivo, apri Impostazioni → Abbonamento → Abbonati e tocca “Ripristina acquisti”. In questo modo viene ripristinato anche un abbonamento che un familiare condivide con te. Usa l’Apple Account con cui è stato fatto l’abbonamento, oppure uno dello stesso gruppo “In famiglia”.
I tuoi dati
In breve
Nessun account, nessun server. L’app non invia i tuoi dati né a noi né a nessun’altra azienda. Il gioco con un partner scambia dati solo con l’altro dispositivo — su una rete Wi‑Fi a cui sono connessi entrambi i dispositivi, oppure da dispositivo a dispositivo quando i due sono vicini.
Dove vengono conservati
Le tue impostazioni, i tuoi set da indovinare — comprese le immagini che aggiungi — e il tuo elenco di stati sono memorizzati sul tuo dispositivo, nello spazio di archiviazione dell’app stessa. Finché non attivi “Salva le statistiche sul dispositivo”, le statistiche restano solo in memoria mentre l’app è in esecuzione.
Come i dati di qualsiasi altra app, tutto questo finisce nei backup del tuo dispositivo.
L’app non contiene strumenti di analisi né di segnalazione degli arresti anomali.
Quando ci scrivi
Le email che ci invii sono normale corrispondenza: le conserviamo solo per il tempo necessario a risponderti.
Tutti i dettagli sono nell’Informativa sulla privacy.
I tuoi set creati con l’IA
Puoi chiedere a un assistente IA, per esempio un chatbot, di disegnare le immagini per un set da indovinare o di creare un intero set. Le immagini sono disegni SVG. Un’immagine SVG può contenere le sue scritte in più lingue, e l’app mostra allora le scritte nella lingua impostata nell’app. Un’immagine può anche prendere i colori del tema dell’app, sia nella versione chiara del tema sia in quella scura. Un set può avere un suo segnaposto “?”: l’immagine mostrata mentre il valore è nascosto. L’assistente ha bisogno della descrizione dei formati; ogni richiesta qui sotto contiene l’indirizzo di questa descrizione.
Come creare un set
- Copia una delle richieste qui sotto nella chat con l’assistente e modificala come preferisci: l’argomento, il numero di immagini (da 2 a 200), le lingue.
- Se l’assistente non può aprire pagine web, dagli anche la descrizione dei formati: nella sezione Descrizione dei formati per l’IA tocca “Copia” e incolla la descrizione nella stessa chat, oppure tocca “Salva” e allega il file salvato.
- L’assistente risponde con il set in un unico blocco di codice, spesso con qualche parola di spiegazione prima e dopo. Copia solo il blocco di codice: in molte app di chat ha un suo pulsante per copiarlo.
- Nell’app, tocca nella vista principale e, nella vista “Aggiungi un set”, tocca “Incolla dagli appunti”. Se l’assistente funziona su un altro dispositivo, per esempio un Mac, salva lì il blocco di codice in un file il cui nome termina con .json e tocca invece “Importa da file”. Il nuovo set viene aggiunto e scelto; tocca “Inizia a indovinare” per andare alla vista principale. Gli stessi pulsanti si trovano anche subito sotto questi passaggi.
Se c’è un errore, chiedi all’assistente di correggerlo.
Un set senza didascalie:
Crea per l’app Intuition Check un set da indovinare chiamato “Animali”: 10 immagini SVG di animali diversi, senza didascalie. Prima leggi la descrizione dei formati e seguila: https://intuition-check.com/llm-formats.txtUn set con una didascalia in ogni immagine. La didascalia non cambia con la lingua dell’app:
Crea per l’app Intuition Check un set da indovinare chiamato “Frutta”: 8 immagini SVG di frutti diversi, ognuna con una didascalia sotto il disegno: il nome del frutto. Prima leggi la descrizione dei formati e seguila: https://intuition-check.com/llm-formats.txtUn set con nomi in più lingue. Ogni didascalia mostra il nome dell’immagine nella lingua dell’app:
Crea per l’app Intuition Check un set da indovinare multilingue chiamato “Pianeti”: 8 immagini SVG dei pianeti, ognuna con una didascalia che mostra il nome dell’immagine nella lingua dell’app. Dai i nomi in italiano, tedesco e hindi. Prima leggi la descrizione dei formati e seguila: https://intuition-check.com/llm-formats.txtUn set le cui immagini prendono i colori del tema dell’app:
Crea per l’app Intuition Check un set da indovinare chiamato “Meteo”: 8 immagini SVG — sole, nuvola, pioggia, neve, temporale, vento, nebbia e arcobaleno — senza didascalie. I loro colori devono seguire il tema dell’app, sia nella versione chiara sia in quella scura. Prima leggi la descrizione dei formati e seguila: https://intuition-check.com/llm-formats.txtCome creare una sola immagine
L’assistente può creare anche una sola immagine. Copia il suo blocco di codice, apri uno dei tuoi set di immagini, tocca e poi “Incolla dagli appunti”. L’immagine viene aggiunta senza nome: toccala e scrivine uno nel campo “Nome”. Puoi anche salvare il blocco di codice in un file il cui nome termina con .svg, poi toccare nel set e scegliere “File”: il nome del file senza .svg diventa il nome dell’immagine.
Disegna un’immagine SVG di un gatto per l’app Intuition Check. Prima leggi la descrizione dei formati e seguila: https://intuition-check.com/llm-formats.txtChe cos’altro può avere un set
Chiedi all’assistente di spiegarti che cosa permettono i formati, con un esempio di richiesta per ogni possibilità:
Leggi la descrizione dei formati per l’app Intuition Check: https://intuition-check.com/llm-formats.txt Spiegami in breve e con parole semplici che cosa si può fare nei set e nelle immagini: come le immagini possono seguire il tema dell’app — i diversi temi, la versione chiara e quella scura; come i nomi di un set e delle sue immagini possono avere traduzioni in altre lingue; quali tipi di didascalie può avere un’immagine; che cosa può mostrare il segnaposto “?” del set (il suo dorso). Per ogni possibilità, dammi un esempio di richiesta che posso mandarti. Per ora non disegnare niente.Descrizione dei formati per l’IA
La descrizione dei formati è scritta in inglese per un assistente IA, non per essere letta da una persona. La stessa descrizione si trova sul sito, all’indirizzo indicato nelle richieste qui sopra.
This is a specification for language models; it is not formatted for human reading.
Format version: 1
Stable URL: https://intuition-check.com/llm-formats.txt
# Intuition Check: how to make SVG pictures and guess sets
Intuition Check is an iOS app. The app picks one picture of a guess set, hidden, and the user guesses which one.
A guess set is a named, ordered list of pictures. This text tells you how to produce (A) a whole guess set as
one JSON object, or (B) one picture as one SVG document, so that the app accepts it and draws it well.
The user's wishes always win. Every rule, default and style advice in this text is what you do when the user
has not said otherwise: anything the user asks for — any texts, any number of them, any place, size, shape,
colour or layout, a caption over the drawing, a word along an arc — overrides it. Only facts about the app
cannot be overridden, because the app enforces them (what it accepts and refuses, what it removes, how it
draws: sections 2, 3, 5 and the theme rules of 6 — but a sentence there that tells you what to do is still a
default, not a fact about the app); if a wish runs into one of them, do the closest thing the app allows and
say so.
## When the user asks what the formats allow (to explain, not to make)
Answer in the user's language, in plain words, without code. Keep apart what the app does and what you do by
default. The sizes, positions and orders in this text, and its sentences that tell you what to do ("put",
"give", "write", "keep"), are your defaults for a good result: the app does not check them and the user may
ask otherwise. Do not retell them as rules of the app ("must", "required", "not allowed"); say "by default I …".
What the app itself does:
- Themes: four themes, each light and dark. The app never recolours a picture on its own; a picture follows
the theme only where its own file says so (section 6), which you write when asked.
- Names: a set needs a name; a picture's name is optional. The set and every picture may have translations,
each its own languages; the app shows the one for the app language, else the default name.
- Captions: text in a picture is part of the drawing; the app never writes or translates it. A caption is one
fixed text, or holds versions in any number of languages, two included, and the app language picks one.
- The "?" placeholder: a set without a cover shows the app's own "?". The app draws no cover itself. A cover
is a picture like any other: it may show anything, with or without text, follow the theme and the app
language, and stand anywhere in the set.
- Limits: at least 2 pictures to guess (a cover is not one of them), at most 200 in all, 10 MB per SVG; one
refused picture refuses the whole set.
Do not translate the themes' code words (section 6).
Terms used below:
- name: the picture's name as stored in the app (`name`, `nameTranslations`). It is data, not part of the drawing.
- caption: a text drawn inside the picture (an SVG `<text>`). Optional. See section 4.
- app language: the language the app's interface is set to, in the app itself; it may differ from the device's
language. One of the codes in section 3.
- user's language: the language the user writes to you in, unless the user names another.
## 1. Output contract
A. The user asks for a SET (several pictures, "guess set", "set"):
- Answer with ONE JSON object as defined in section 2, in ONE code block. Nothing else is needed.
- If you add words outside the code block, they must not contain `{` or `}`: the app reads the pasted text
from the first `{` to the last `}`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block (chat apps usually show a copy button on it) and paste it into Intuition Check as a new set — or,
on another device, to save it as a file whose name ends in .json and open that file in the app.
B. The user asks for a single PICTURE:
- Answer with ONE SVG document (section 5) in ONE code block.
- If you add words outside the code block, they must not contain `<svg` or `</svg>`: the app reads the
pasted text from the first `<svg` to the last `</svg>`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block and paste it into one of their picture sets in Intuition Check; the picture is added without a
name. Or to save it as a file whose name ends in .svg and add that file to a set: the file name without
".svg" becomes the picture's name, so suggest a file name that is the name, e.g. `Cat.svg`.
In both: do not name the app's buttons or screens from memory, and do not translate their names yourself. The
app's help exists in every language of the app, with the exact names the app shows in that language; the steps
are in its section "#ai_sets", and the page for each language is listed in https://intuition-check.com/llms.txt. If
you can open web pages and the user wants the steps, take the names from the page in the user's language.
Otherwise the one sentence above is enough: the app's help and its own screens show the user where to paste.
Ask first, or proceed:
- Proceed without questions. Decide what the request leaves open, and say what you decided in a sentence or
two beside the code block:
- which things of a kind ("five animals": choose the animals);
- how many pictures, if no number is given: 4;
- the regional form of the user's language: take the likeliest and name it (e.g. "Canadian French");
- translations: as well as you can; name the languages you are least sure of;
- themes not mentioned: fixed colours, and one sentence that a version following the app's themes can be
made;
- a cover with nothing said about what it shows: the question mark (8c).
- Ask only when you cannot start: you cannot tell which language the names should be in, or the request names
no subject at all. Then at most 2 questions, in ONE message, in the user's language, each with the choice
you will make if the user does not mind; no code block in that message. Never ask what the message already
says. Plain words: no "code block", "JSON", "opaque", "plate", "import", nothing about how the format works.
- If you cannot ask (there is no dialogue), or the user tells you not to: proceed.
- What you say beside the code block is in the user's words: "its own background", not "opaque plate";
language names, not codes; at most four short points. The file endings .json and .svg are allowed: the
user needs them.
- Like all words outside the code block: no `{` or `}` next to a set, no `<svg` next to a picture. Do not
quote code outside the code block.
Defaults when the request does not say otherwise:
- No caption text in the drawing (section 4, option 1).
- No theme colours (section 6). Fixed colours of your own.
- Names: always give every picture a `name`, in the user's language. Give no `nameTranslations` unless the
user asks for other languages or for captions in several languages (section 4, option 4).
- Number of pictures: what the user asked for; never fewer than 2 or more than 200.
- No cover (section 2). A cover the user asks for is extra: it is not one of the pictures asked for.
## 2. The set format (JSON)
```json
{
"intuitionCheckSet": 1,
"name": "Animals",
"nameTranslations": { "ru": "Животные", "de": "Tiere" },
"images": [
{ "name": "Cat", "nameTranslations": { "ru": "Кот", "de": "Katze" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><circle cx=\"50\" cy=\"56\" r=\"30\" fill=\"#f57c00\"/><path d=\"M24 44 L28 14 L48 30 Z M76 44 L72 14 L52 30 Z\" fill=\"#f57c00\"/></svg>" },
{ "name": "Fish", "nameTranslations": { "ru": "Рыба", "de": "Fisch" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><ellipse cx=\"44\" cy=\"50\" rx=\"30\" ry=\"18\" fill=\"#1976d2\"/><path d=\"M70 50 L92 32 L92 68 Z\" fill=\"#1976d2\"/></svg>" }
]
}
```
(The drawings above are kept tiny to show the shape of the file. More examples are in section 8.)
Keys:
- `intuitionCheckSet` (required): the integer 1.
- `name` (required): the set's default name. Not empty.
- `nameTranslations` (optional, on the set and on each image): object, language code → name. Codes: section 3.
- `images` (required): array of at most 200 objects, at least 2 of them pictures to guess (a cover is one
more, not one of the 2).
Array order = display order. Each object:
- `name` (optional in the format; always give it): the picture's default name.
- `nameTranslations` (optional): as above.
- `svg` (required): one complete SVG document as a JSON string (section 5).
- `cover` (optional): the JSON literal `true` on the picture that is the set's cover (below). Leave it out
on every other picture.
- Unknown keys are ignored. Do not add any.
The cover: while the app hides the value to guess, it shows a "?" in its place. A set — any set, with or
without captions — may bring its own picture for that place: the cover. Give one ONLY when the user asks for
it (a cover, a back, a placeholder, a question-mark picture). It shows what the user wants: for a set of
playing cards, for example, the pattern of a card's back. If the user does not say what it shows, draw the set's
own frame, with a question mark where the other pictures have their subject (8c; the last picture of 8f);
when the pictures' plates differ in colour, a plate of the same family (8f: a neutral grey). Exactly one
picture gets `"cover": true` (if several do, the first counts and the others are ordinary pictures). The
cover is never an answer, so the set still needs at least 2 other pictures. Put it last in `images` (your default; the app takes it at any place). Give it
a `name` in words ("Question mark", not "?") and, in a multilingual set, `nameTranslations` in the same
languages as the pictures: the app shows the cover's name in the set's list of pictures, in the app language.
By default the cover has no caption (no word under it); the app draws any text it has. Its question mark is the cover's subject; it only borrows the
`class="caption"` pattern of section 4, option 4, so that it changes with the app language. Write the mark
as text (preferred) in two forms: `?`, and `؟` for Arabic and Urdu (the form those languages write). The app
does not change the mark itself: the cover holds both, and its own style sheet shows the one for the app
language. That works in every set, also in one without captions; the two marks are then its only `<text>`. Drawn as a
shape instead, the mark is the same in every app language: Arabic and Urdu see the Latin form. A cover with
a subject of its own (a card back, a cloud) needs no `<text>` and no style sheet.
A single picture (answer B) has no cover key: the user marks a picture as the cover inside the app. A single
picture meant as a cover and asked with a caption: do both, and say that the word will show on the cover.
Rules:
- Strict JSON, UTF-8: no comments, no trailing commas. Non-ASCII characters may be written as they are.
- Inside the `svg` string escape `"` as `\"` and `\` as `\\`; write the SVG on one line, or write each line
break as `\n`. No raw line break or tab inside a JSON string. Where you join two lines, put one space,
never nothing. No other escape is needed: an apostrophe stays `'` (`\'` is not JSON), and letters of any
script stay as they are.
- Types: `intuitionCheckSet` is the number 1, every name and translation is a string, `cover` is `true`. A
wrong type (`"cover": "true"`, a number as a name, `null` as a translation) makes the app refuse the whole
text.
- If the app refuses any one picture, it imports nothing and names the refused pictures. Every picture must
be valid.
- A name is one line of plain text. The app trims it, turns line breaks and tabs into spaces, and cuts it at
256 characters. Keep names short (one to three words): they are shown small.
How names are shown:
- A set is multilingual when the set or any image has at least one translation.
- In a multilingual set the app shows, for the app language: the translation with exactly that code; else
the translation with the code's first part (`fr-CA` → `fr`, `en-GB` → `en`, `es-419` → `es`); else the
default `name`.
- In a set without translations the app shows the default `name` in every app language.
When the user asks for a multilingual set:
- Default `name` (set and images): in the user's language.
- `nameTranslations`: one entry per requested language, on the set AND on every image. Give the same
languages on every image (the app does not require it: an image without an entry shows its default name).
- The language of the default `name` gets no entry of its own: a language without an entry shows the default
name.
- A regional code (`en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA`) needs its own entry only when its word
differs from the `en` / `es` / `fr` entry. `pt-BR` and `pt-PT` have no common code: each requested one that
is not the language of the default `name` needs its own entry (asked for "Portuguese" with an English default
name: give both). The same for `zh-Hans` and `zh-Hant`.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`, `fr`,
`es`), in names as in captions: every form of that language then shows it.
- Languages not named ("a multilingual set"), or "all languages": every language of section 3 — 53 codes,
47 entries (see there). Translate as well as you can (section 1). Leave out only a language you cannot
write at all (it then shows the default name), and tell the user which.
- `nameTranslations` change only names, never a caption. A multilingual set has no captions unless the user asks for them; a
caption drawn inside the pictures needs its own words for each language in the SVG itself (section 4,
option 4).
## 3. Language codes
Write the codes exactly as here (case matters):
ar bg bn ca cs da de el en en-AU en-CA en-GB es es-419 fi fr fr-CA gu he hi hr hu id it ja kk kn ko lt ml mr ms
nb nl or pa pl pt-BR pt-PT ro ru sk sl sv ta te th tr uk ur vi zh-Hans zh-Hant
A code that is not in this list is not an error: the app drops it. An entry
with an empty value is dropped.
"All languages" is 53 codes but 47 entries besides the default, in names and in captions: the user's language
is the default and needs none, and `en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA` show the `en` / `es` / `fr`
word unless theirs differs. (With a Bengali default, `en` is one of the 47 and `bn` is not.)
## 4. Captions (text inside the drawing): four options
Names (section 2) are separate from captions: the app never writes a name into a picture and never changes any
text of a picture. Give names always. Text in, on or under the picture — whatever the user calls it (name,
word, label) — is a caption request; a wish about the words alone (correct, careful) is not. If you leave out
something that was asked for, say so. Lettering that is part of the subject (STOP on a road sign) is
drawing, not a caption: allowed under every option, written once, with `lang`.
Urdu is drawn in Nastaliq, its own style, which reaches lower under the line than other scripts (about
0.3 × font-size): leave room under an Urdu caption. A `؟` in Urdu is smaller in Nastaliq: give it its own text and size (8c).
A caption's `lang` may be a regional code (`en-GB`, `fr-CA`), also where its name stands under the parent code.
Choose the caption option from the request:
1. DEFAULT — no caption. The drawing has no `<text>` that spells the name. Also for a multilingual set
whose user did not ask for captions.
2. ONE-LANGUAGE caption — when the user asks for a caption / label / word in or under the picture and names
no languages for it. A plain `<text>` with the word in the user's language; every app language shows
that same word. Put `lang="CODE"` of the caption's language on the `<text>`: a picture
with text is drawn anew for each app language, and without `lang` the letter forms follow the app language. No
`letter-spacing` in Arabic, Hebrew, Thai or an Indic script. Example:
`<text lang="ru" x="50" y="91" font-size="12" font-family="sans-serif" text-anchor="middle" fill="#222222">Кот</text>`
3. TWO LANGUAGES AT ONCE — when the user names exactly two languages for the word under the picture and does
not say it should change with the app's language. The same for any other text of the picture: each gets its
two lines. Two `<text>` lines, each with its `lang`, both always
shown, no style sheet for them: the user's language on top, font-size 10, baselines at y = 84 and 95,
subject in the upper 68 units (100-unit viewBox). A line in a script of 8b's "Lettering" block takes that
`font-family` as an attribute; a long word follows "Size" below. Names: the user's language as `name`,
the other in `nameTranslations`. Say that both words always show, and that captions that change with the
app's language can be made instead.
4. CAPTIONS IN SEVERAL LANGUAGES — when the user names three or more languages for the captions, or asks for
captions in all of the app's languages, or for captions that follow the app's language (= all of them).
The picture holds one caption per language and a small style sheet; through that style sheet the app
language picks the caption (8b, 8f). Languages: exactly those the user named; "all" = every language of
section 3 (53 codes, 47 entries: see there), translated as well as you can (section 1). In a set, give
every image `nameTranslations` with the same languages and the same words, so that the name and the
caption agree.
How option 4 works:
- A picture that contains `<text` or `:lang(` is drawn anew for each app language it is shown in, each time
inside an HTML page whose language is that app language: `<html lang="CODE">`, CODE from section 3 (`ru`,
`pt-BR`, `zh-Hant`, …). The app changes nothing in the file; the file's own CSS picks the caption with the
selector `:lang()`.
- `:lang(x)` matches a page in `x` and in every `x-…`: `:lang(fr)` also matches `fr-CA`, `:lang(es)` also
`es-419`, `:lang(en)` also `en-GB`. `pt-BR` and `pt-PT`, `zh-Hans` and `zh-Hant` are written separately.
- The pattern:
- All language versions of one text in ONE group with `class="caption"`; each `<text>` in it is one
language version, all at the same place.
- Any number of texts, anywhere and in any form (labels on parts, a title, words along an arc with
`<textPath href="#id">`): give each text its own group with `class="caption"` holding its language
versions; the one style sheet serves them all.
- The default caption has the class `default`. It carries the word of the default `name`, in the user's
language. It is shown when the page has no language and in every language that has no caption of its
own. The user's language is one of those: its code stands in no rule and on no caption. (In 8b and 8f
the default word is English, so `en` appears nowhere. The Zodiac files call this class `en`.) The
default caption is also shown on pages of other languages: give it `lang="CODE"` of the user's language.
If that language has a line in the "Lettering" block of 8b, add `.default` to that line's selector
(`.default, .hi, .mr { font-family: … }`; `.default` alone when no caption has that class), and to the
`letter-spacing: 0` line if you use letter-spacing.
- Every other caption's `class` lists the codes of the languages that show it. Languages with the same
word may share one caption: `class="bg ru"`; that changes only the `class`, never the style sheet. These
captions need no `lang`: each shows only on a page of its own language.
- The style sheet, in this order:
`.caption text { display: none }` — hide every caption;
`.caption .default { display: inline }` — show the default one;
`:lang(ar, bg, …) .default { display: none }` — hide the default one in every language that has its own
caption (list them all);
`:lang(ar) .ar, :lang(bg) .bg, … { display: inline }` — show each language's own caption.
- A regional code whose word differs from its parent's (`es-419` next to `es`): its own caption, its code in
both rules like any other, and one more rule: `:lang(es-419) .caption .es { display: none }` (the extra
`.caption` makes it win wherever it stands in the sheet). If its word is the parent's, give it nothing.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`,
`fr`, `es`), so every form of that language shows it. "Portuguese" alone: one caption
`class="pt-BR pt-PT"` when the word is the same.
- Do not repeat the default word under the user's own code (no caption, no rule, no `nameTranslations`
entry for it).
- Check: the codes in the hiding rule = the codes in the showing rule = the codes on the captions, and
each code is on exactly one `<text>`; the user's own code is in none of the three. Otherwise a language
shows no caption, or two at once.
- To leave a language out: no `<text>` for it and its code in neither rule. It then shows the default
caption.
- In a set: the same style sheet, the same attributes on the caption group and the same languages in every
picture, character for character. Only the words differ, and the size of a long word. (A cover has its
own text and rules: 8c, 8f.)
- Size: the app does not measure or shrink text. Choose one `font-size` on the group at which the captions
fit the free width. A word too long for it: first its own smaller `font-size` attribute, down to 9 (on a
100-unit viewBox); if it still does not fit, a shorter everyday word (and the same word as its name).
Never under 9. To estimate a width (measured in WebKit on a Mac):
- ordinary case in bold `sans-serif` (8f): 0.45 to 0.6 × font-size per letter. Треугольник is 77 of 100
units wide at font-size 12, and 68 at 10.5;
- a Chinese character: about 1 × font-size;
- Indic scripts, Thai, Arabic, Hebrew in bold `sans-serif`: 0.3 to 0.55 × font-size per code point (13
words measured).
- Case: ordinary case, as in 8f; capitals with wide spacing only for the style of 8b. Capitals follow each
language's rules: Turkish i → İ; Greek capitals lose the accent (ΑΣΤΈΡΙ → ΑΣΤΕΡΙ); German ß → SS.
- Fonts: copy the "Lettering" block of 8b (in a set, only the lines of the scripts you use). It gives every
script outside Latin, Cyrillic and Greek its own font list (fonts present on Apple devices, at a weight
they really have), and sets `letter-spacing` to 0 for Arabic, Hebrew, Thai and the Indic scripts — in most
of them the letters join or stack, and spacing breaks that (a line needed only when the group has
letter-spacing). Japanese, Chinese and Korean each get their
own font so that a Han character takes its regional form; that is why `zh-Hans` and `zh-Hant` keep
separate captions even with the same word.
- Direction: the page is left-to-right in every app language. Keep `text-anchor="middle"` for every script.
An Arabic, Hebrew or Urdu caption mixed with digits or Latin letters has not been tested: avoid it.
- A caption drawn twice (e.g. a shadow under it): put the group once inside `<defs>` with an `id`, and draw it
with two `<use href="#id">` that carry the colours and the offset.
- Whole set: captions and names in all languages fit in one answer. Write every language that was asked for, in
every picture. Do not ask about it, and do not tell the user it may not fit. In a set, leave out comments
and indentation.
- Never: fewer languages than asked without saying which are missing; captions left out when they were asked
for; one set spread over several messages or delivered as single pictures; a set cut short. A set is
always ONE JSON object in ONE message.
Start from 8f (a small set with captions and a cover, 100-unit viewBox). Take from 8b (a picture with a
caption in every language) its "Lettering" block, and its gold medallion style only when the user asks for
it; 8c is that set's cover. All three are complete and tested in the app. 8b and 8c are built like the app's
own Zodiac set; one of its files, if you can open web pages (you do not need it):
https://intuition-check.com/sets/zodiac/zodiac-08-scorpio.svg
## 5. The SVG document: what the app does with it
Facts (from the app's code):
- Size limit: 10,000,000 bytes per SVG (UTF-8). A larger SVG is refused.
- The app recognises an SVG by the characters `<svg` within the first 4096 bytes. Begin the document with
`<svg`: no XML declaration, DOCTYPE or comment before it.
- The app draws the SVG into a still bitmap, at most 1600 pixels on the longer side, with WebKit, inside an
HTML page. A picture with text is drawn anew for each app language it is shown in, and one with theme
rules for each theme. The background is transparent: where the drawing paints nothing, the app's own
background shows, light or dark depending on the user's theme.
- Scaling: the root's `viewBox` is fitted into the bitmap, aspect ratio kept, centred. `width` and `height`
on the root are ignored. A picture without a `viewBox` is accepted, but drawn unscaled (cut off or tiny):
always write one.
- The aspect ratio is read from the first `viewBox="minx miny width height"` in the first 4096 bytes: double
quotes, four numbers separated by spaces or commas, positive finite width and height. If it cannot
be read, the bitmap is square. Ratios outside 1:20 … 20:1 are clamped.
- `preserveAspectRatio="none"` on the root is replaced with `xMidYMid meet`: a picture is never stretched.
- Scripts never run. Nothing is loaded from the network: only content inside the file is drawn.
- Rendering has a time limit (10 seconds to load, 10 seconds to draw). A picture that exceeds it is refused.
Removed before drawing (so never write them; the rest of the picture is still drawn):
- these elements with everything inside: `script`, `foreignObject`, `meta`, `link`, `base`, `iframe`, `frame`,
`frameset`, `object`, `embed`, `applet`, `portal`, `form`, `input`, `button`, `textarea`, `select`, `option`,
`audio`, `video`, `source`, `track`, `template`, `noscript`;
- every attribute whose name starts with `on` (`onload`, `onclick`, …);
- every `href` / `xlink:href` whose value does not start with `#` (a part of the same file) or `data:image/`;
- `@import` in a style sheet; `<?xml-stylesheet …?>`; a DOCTYPE with an internal subset (`[ … ]`).
The removal works on the text of the file: the character sequences `on…=`, `href=` and `@import` are also
removed from text content and CSS, so do not write them there.
Allowed and drawn: shapes, `path`, `g`, `text`, `tspan`, gradients (`linearGradient`, `radialGradient`),
`pattern`, `mask`, `clipPath`, `filter`, `defs`, `symbol`, `use` with `href="#id"`, `<style>` with inline CSS,
`title`, `desc`, `image` with `href="data:image/…"` (a picture embedded in the file).
Not removed, but useless: `a` (a link does nothing in a picture in the app).
Rules for the SVG you write:
1. Root: `<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">` … `</svg>`. Double-quoted
attributes. Lower-case `<svg`. One root; no nested `<svg>` elements.
2. Square `viewBox` (`0 0 100 100`) unless the user asks for another shape. The same `viewBox` for every
picture of a set.
3. Self-contained: no external images, fonts, style sheets or links. For text use
`font-family="sans-serif"` (or `serif`, `monospace`), or the font lists of 8b, which end with one of them:
the text is drawn with the device's own fonts.
4. Well-formed XML: every element closed, attribute values quoted, `&` `<` `>` in text and attribute values
written as `&` `<` `>`. Only SVG elements; no HTML elements.
5. Readable small: the app shows pictures in a grid, each cell may be small. One clear subject that fills
most of the viewBox; a few large shapes; strong contrast; no fine detail. On a 100-unit viewBox: the
subject's lines at least 2 wide, a caption's font-size at least 10, a long word 9. Ornament may be
thinner (the rings of 8b); in a small cell it may not be seen. The examples in this text are bare on
purpose; do not copy their simplicity. Build the subject from about 4 to 10 shapes: its outline, its
parts, and one or two details that make it this thing and no other. Someone who sees only the picture
must be able to name it.
Pale or pastel colours: keep the silhouette. The subject's main shape, or an outline around it, must differ
from the plate by at least 3:1 — a darker outline, or a deeper plate. That is for the silhouette only:
details inside the subject are free.
6. Distinct: the game needs the pictures told apart at a glance. Every picture of a set must differ clearly
from every other in silhouette or in main colour — not only in a detail. No two pictures with the same
SVG text.
7. One style across a set: the same viewBox, margins, line weights, palette family, and the same kind of
background (all with a plate, or all without). With captions: the same lettering and caption place in
every picture.
8. Background: the bitmap is transparent and the app's background can be light or dark. Either draw an
opaque plate of your own behind the subject (e.g. `<rect width="100" height="100" rx="12" fill="…"/>`), or
use only colours that stay visible on both white and near-black, or use theme colours (section 6).
9. Unique `id` values inside one SVG. Ids of different pictures do not clash (each picture is drawn alone).
Do not start an id with `ic-` unless it is a theme rule, and do not name a class of your own `ic-…` or a
variable `--ic-…` (section 6).
10. Keep it light: no heavy filters (large blurs), no deep `use` nesting, no animation (the app does not remove it, but
draws the picture as a still image).
11. A caption must not cross the drawing, unless the user allowed it (labels on the drawing's parts, a word on
a sign or over the subject are such wishes). Any text stays inside its own shape when it has one (a sign,
a label, a slice), and inside the picture. Keep the subject and the caption
apart — e.g. on a 100-unit viewBox: the subject above y = 78 and one caption line with its baseline at
y = 91; with two lines (section 4, option 3), the subject above y = 68.
## 6. Theme colours
Use this section ONLY when the user asks for pictures that follow the app's theme, or for light and dark
versions. Otherwise use fixed colours, no id that starts with `ic-`, no class `ic-…` and no variable
`--ic-…`. When the user said nothing about
themes: fixed colours, and offer a version that follows the themes (section 1). "Looks good in light and dark
mode" is not a theme request: an opaque plate with fixed colours does it (section 5, rule 8). A theme request
wins over a colour description in the same message ("gold on dark, matching the app's themes": theme rules).
The app has four themes — `sand`, `ocean`, `forest`, `dusk` — each in a `light` and a `dark` version. These words
(and `light`, `dark`) are code words for the rules below, not what the user sees: the app shows the four themes
under its own names in the user's language. When you talk to the user, do not translate the code words
yourself; say "the app's four themes" (and "light" / "dark" in the user's language), or, if you can open the
app's help page in the user's language (see section 1), take the themes' names from it.
Every version has its own values for five colours:
- `background` — the colour behind every view;
- `surface` — plates and panels on a view;
- `text` — the app's text colour;
- `accent` — the colour of buttons that are not filled;
- `soft` — in a light version the same as `accent` (a `soft` part on an `accent` part cannot be seen there);
in a dark version a pale tone close to the text colour.
The values (#rrggbb), in the order background, surface, text, accent, soft:
- sand light: f6f2ea eae3d5 403a35 645339 645339
- sand dark: 1b1a18 282622 c7c4bd b89b70 d2cbbe
- ocean light: eef4f7 dde8ee 363d40 3e5a6a 3e5a6a
- ocean dark: 0d1a23 16272f bec4c7 82a3b6 c6d4db
- forest light: f1f4ec e1e8d7 353e34 4a5e46 4a5e46
- forest dark: 111a14 1b261e bec4bd 8ba586 c9d4c6
- dusk light: f6f1f6 eae0ec 3f3944 5e4a6a 5e4a6a
- dusk dark: 17121c 231b2a c2bdc5 a894b4 d3c9d9
All four themes are muted: no colour above is bright. `text`, `accent` and `soft` on `background` or `surface`
have a contrast of at least 5.6:1 in every version.
Fixed colours and theme colours mix freely: give rules only to the parts that should follow the theme (a plate,
outlines, the main shape) and keep your own fixed colours where the picture needs them (the arcs of a rainbow,
a red apple). A part without a rule is drawn as written in every theme.
A part that keeps a fixed colour sits on a plate that changes: check it against the light and the dark
background and surface values of the table. Near-black vanishes on the dark ones (#1b1b1b: 1.01:1), white and
yellow on the light ones (#ffffff: 1.11:1, #f9a825: 1.54:1). Give such parts the theme's text colour — in a
style sheet `fill: var(--ic-text, #333333)` (or `stroke:`), with ids `ic-text` or `ic-stroke-text` — or
use a mid-tone (#e53935: 3.30:1 on the light ones, 3.57:1 on the dark ones).
Captions on a themed plate take the theme's text colour. In a style sheet: one more line,
`.caption { fill: var(--ic-text, #222222) }`, in the sheet that already picks the caption; a single `<text>`
gets a class and the same line; a caption drawn twice through `<use>` gets the class on the `<use>` that
carries its colour (8b). With ids: give the caption group `id="ic-text"` and a written `fill`; the group may
also carry `class="caption"`; a single `<text>` may carry the id itself. A themed cover's mark is coloured
the same way.
There are two ways to write theme colours, and the app reads both. Use a style sheet (6.1), also when the
user will edit the file in Inkscape (6.4). Use ids (6.2) instead when the user says the file will be edited
in Figma, Illustrator, Affinity or Sketch, or asks for ids: those editors write the file anew and drop its
`<style>` element, while ids can come through as layer names (Figma only with its option to include ids).
One way per picture, and in a set the same way in every picture: the app accepts both in one file, but a
rule in a group's id overrides the sheet colours of the classed shapes inside that group.
### 6.1 A style sheet
The app adds to the root `<svg>` the classes `ic-sand` | `ic-ocean` | `ic-forest` | `ic-dusk` and `ic-light` |
`ic-dark`, and defines the CSS variables `--ic-background`, `--ic-surface`, `--ic-text`, `--ic-accent`,
`--ic-soft` — but only if the file contains, in its `<style>` element, one of those six class names after a
dot (e.g. `.ic-dark`), or, in `<style>` or in a `style` attribute, a variable name that starts with `--ic-`.
```
.plate { fill: var(--ic-surface, #dddddd) }
.leaf { fill: var(--ic-accent, #e53935) }
.ic-dark .dot { fill: #ffd54f }
.ic-forest.ic-dark .dot { fill: #69f0ae }
```
The second value inside `var()` is the colour other viewers show. Give the styled elements a `class` and no
`fill` in a `style` attribute. The second value is needed: always write it.
- The five variable names are the only ones. Another name (`--ic-bg`) is never defined: its second value is
drawn in every theme.
- Write `var(--ic-…)` inside the `<style>` element, not in a `fill="…"` or `stroke="…"` attribute: the app
does not look there, and with no other mention it defines no variables.
- The app writes the six classes on the root. Never write one of them on an element yourself.
- A sheet rule beats a colour written in a `fill` / `stroke` attribute; a colour in a `style` attribute beats
the sheet.
- Of two sheet rules of equal weight the later one wins: plain rules first, then `.ic-light` / `.ic-dark`
rules, then theme rules.
- Put these lines into the same `<style>` as the caption rules of section 4, when the picture has them.
### 6.2 Rules in an id
A rule = optional limits + a colour.
- Limits, at most one of each kind, any order: a theme (`sand` | `ocean` | `forest` | `dusk`); a version
(`light` | `dark`); a paint (`fill` | `stroke`). No limits = every theme, both versions, fill and stroke.
- Colour: one of the five names above, or your own colour as exactly six hex digits (`1e88e5`). Colour words
(`red`) are not colours in a rule. All rule words are English.
`id="ic-` + one or more rules, all words joined by hyphens, own colours without `#`:
- `ic-text` — the text colour everywhere;
- `ic-light-accent-dark-soft` — accent in light versions, soft in dark versions;
- `ic-dark-1e3a2a` — own colour in dark versions; as drawn in light versions;
- `ic-ocean-dark-c3ced4` — own colour in the dark version of Ocean only;
- `ic-stroke-accent` — accent on the outline only.
- `ic-fill-accent-stroke-text` — two rules in one id: accent inside, text colour on the outline.
Reading stops at the first character that is not an ASCII letter, digit or hyphen, and at the first word that
is not a rule word. So keep ids unique with a numeric suffix: `ic-text-2`, `ic-text-3`. A word of your own
ends the rules: `ic-moon-text` holds no rule. A six-letter word of hex digits (`facade`) is read as a colour.
What a rule does:
- The id may be on a shape, a `text`, or a group `g`. A rule on a group covers everything inside it, except
what is inside `defs`, a gradient, `mask`, `pattern`, `clipPath`, `marker`, `symbol` or `filter`.
- For each element, fill and stroke are chosen separately. Its own rule is used when one applies in the
current theme and version; otherwise the rule of the innermost enclosing group that has one that applies;
otherwise the colour stays as drawn.
- Among several rules of one element that apply: theme + version beats theme, theme beats version, version
beats no limit; then a rule with `fill` / `stroke` beats one without; then the first one written.
- The chosen colour replaces a plain colour written in the element's `fill` / `stroke` attribute or in its
`style` attribute. Left as written: `none`, `transparent`, `currentColor`, `inherit`, `url(…)` (gradients),
`var(…)`, and colours with their own alpha (`#rrggbbaa`, `#rgba`, `rgba(…)`, `hsla(…)`).
- A `path`, `rect`, `circle`, `ellipse`, `polygon`, `polyline`, `text` or `use` with no `fill` written gets
the chosen fill added. A `line` does not. A stroke is never added: a rule colours a stroke only where a
`stroke` with a plain colour is written on that element itself (not only on its group).
- So, to be safe: write `fill="#rrggbb"` (and `stroke="#rrggbb"` where there is an outline) on every element
that a rule should colour. These written colours are also what other SVG viewers show.
- A `stop-color` or `color` written on a covered element is replaced too (by the fill colour, else by the
stroke colour). A gradient with a rule in its own id has its stops recoloured.
- Theme rules are not applied to an SVG with more than 50,000 tags; it is drawn as written.
- Do not colour the same element both ways. When an element with a `class` has a rule — its own or its
group's — the app writes the rule's colour into the element's `style` attribute, which beats the sheet
(unless the sheet says `!important`): a group's rule so overrides the sheet colours of the classed shapes
inside it. On an element without a `class` the sheet wins wherever one of its selectors reaches it.
### 6.3 Other ways the app reads (do not use unless asked)
- A `<desc>` directly inside an element, beginning with `Intuition Check`, then one rule per line as
`limits: colour` (e.g. `dark stroke: text`, `light: #1e88e5`); a first-line form `Intuition Check: text`.
- Inkscape swatches (a one-colour gradient whose label or id holds rules).
### 6.4 If the user wants to edit the file in Inkscape later
Inkscape keeps both ways, in Inkscape SVG and in Plain SVG.
- A style sheet (6.1): Inkscape keeps the `<style>` element with the `var()` inside it. Write `var()` only
there, never in a `style` attribute (Inkscape removes such an attribute when the element is edited), and add
`!important` to every colour in the sheet (Inkscape writes colours into the element's `style` attribute,
which otherwise wins).
- Ids (6.2): Inkscape keeps ids. Labels are lost in Plain SVG.
## 7. Checklist — run before answering
For a set:
1. The answer is one code block holding one JSON object; it parses as strict JSON.
2. `"intuitionCheckSet": 1` is present; `name` is not empty.
3. `images` has 2 to 200 entries: exactly the number of pictures the user asked for, plus the cover if
there is one.
4. Every image has a non-empty `name` and an `svg` string.
5. In every `svg` string each `"` is written `\"`, and there is no raw line break.
6. Language codes are from section 3, spelled exactly. In a multilingual set every image and the set have
the same languages.
7. Captions follow section 4: none by default; one language only if asked, with `lang` on the `<text>`
two named languages: two lines, both shown, each with `lang`; three or more, or all, only if the user
named them or asked for all. Then: the default caption has `lang`; the codes in the hiding rule = the
codes in the showing rule = the codes on the captions, each on exactly one `<text>`; the same style sheet
in every picture but the cover; every image has `nameTranslations` with the same languages and words.
8. A cover only if asked: one picture with `"cover": true`, last, plus at least 2 other pictures.
9. The answer is whole: the JSON ends with its `}`, and no picture was shortened or left for later.
10. Beside the code block: the sentence on how to use it, and what you assumed (section 1).
For every SVG (in a set or alone):
11. Starts with `<svg`, has `xmlns="http://www.w3.org/2000/svg"` and `viewBox="0 0 W H"` in double quotes,
ends with `</svg>`.
12. Well-formed: all elements closed, `&` `<` `>` escaped in text.
13. None of: `script`, `foreignObject`, `a`, `style` with `@import`, `on…` attributes, `href` to anything
but `#id` or `data:image/…`, external fonts, HTML elements, nested `svg`, animation.
14. Far under 10,000,000 bytes.
15. The subject is large, simple, high-contrast; the picture differs clearly from every other picture of the
set; it is visible on a light and on a dark background; no caption crosses the drawing.
16. Theme rules only if asked; without them no id starts with `ic-` and the style sheet has no `.ic-` class
and no `--ic-` variable. With them: one method in the picture, the same in every picture of the set.
Style sheet: `<style>` itself holds a `--ic-` variable or one of the six classes (a `var()` only in a
`fill` attribute does nothing); the variable names are the five of section 6; every `var()` has a second
value. Ids: every word after `ic-` is a rule word; the element has its `fill` (and `stroke`) written.
Every fixed colour left on a themed plate was checked against the light and the dark values.
17. Ids are unique within the SVG.
## 8. Complete examples
### 8a. Minimal set, no captions
```json
{
"intuitionCheckSet": 1,
"name": "Shapes",
"images": [
{ "name": "Circle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"50\" r=\"30\" fill=\"#e53935\"/></svg>" },
{ "name": "Triangle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 18 L84 78 L16 78 Z\" fill=\"#1565c0\"/></svg>" }
]
}
```
### 8b. One picture with a caption in every language (section 4, option 4)
A star in a gold medallion with its caption in all 53 languages, built like the app's Zodiac set: the
"Theme" block turns the gold to bronze in light versions (section 6.1), the "Language" block picks the
caption, the "Lettering" block gives each script its font. Languages with the same word share a caption;
es-419 and fr-CA follow es and fr; a page with no language, or one not listed, shows the default caption,
"STAR" (the user's language is English here). The "Theme" block is not part of option 4: this medallion has
no plate, and its gold has to darken on a light background. Without a request for theme colours leave that
block out and draw an opaque plate (section 5, rule 8), as 8f does.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme. The app gives the root the classes ic-light or ic-dark (and ic-<theme>).
The gold is drawn for a dark background; on a light one it turns bronze. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
.ic-light .shadow-glyph { stroke-opacity: 0.27 }
/* Language. Every caption is in the file once; its class names the languages that
show it. The page's language (html lang) picks the caption; without a language,
or with one not listed here, the default one. fr-CA follows fr, es-419 follows es. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, bg, bn, ca, cs, da, de, el, es, fi, fr, gu, he, hi, hr, hu, id, it, ja, kk,
kn, ko, lt, ml, mr, ms, nb, nl, or, pa, pl, pt-BR, pt-PT, ro, ru, sk, sl, sv, ta,
te, th, tr, uk, ur, vi, zh-Hans, zh-Hant) .default { display: none }
:lang(ar) .ar, :lang(bg) .bg, :lang(bn) .bn, :lang(ca) .ca, :lang(cs) .cs, :lang(da) .da,
:lang(de) .de, :lang(el) .el, :lang(es) .es, :lang(fi) .fi, :lang(fr) .fr, :lang(gu) .gu,
:lang(he) .he, :lang(hi) .hi, :lang(hr) .hr, :lang(hu) .hu, :lang(id) .id, :lang(it) .it,
:lang(ja) .ja, :lang(kk) .kk, :lang(kn) .kn, :lang(ko) .ko, :lang(lt) .lt, :lang(ml) .ml,
:lang(mr) .mr, :lang(ms) .ms, :lang(nb) .nb, :lang(nl) .nl, :lang(or) .or, :lang(pa) .pa,
:lang(pl) .pl, :lang(pt-BR) .pt-BR, :lang(pt-PT) .pt-PT, :lang(ro) .ro, :lang(ru) .ru,
:lang(sk) .sk, :lang(sl) .sl, :lang(sv) .sv, :lang(ta) .ta, :lang(te) .te, :lang(th) .th,
:lang(tr) .tr, :lang(uk) .uk, :lang(ur) .ur, :lang(vi) .vi, :lang(zh-Hans) .zh-Hans,
:lang(zh-Hant) .zh-Hant
{ display: inline }
/* Lettering. A script whose letters join or stack gets no letter-spacing; every script
outside Latin, Cyrillic and Greek gets its own font. Telugu at 500: iOS has Kohinoor
Telugu only up to Medium, and WebKit would fake a 600 from it. */
.ar, .ur, .he, .bn, .gu, .hi, .mr, .kn, .ml, .or, .pa, .ta, .te, .th { letter-spacing: 0 }
.ar, .ur { font-family: system-ui, -apple-system, Geeza Pro, sans-serif }
.he { font-family: system-ui, -apple-system, Arial Hebrew, sans-serif }
.bn { font-family: Kohinoor Bangla, Bangla Sangam MN, sans-serif }
.gu { font-family: Kohinoor Gujarati, Gujarati Sangam MN, sans-serif }
.hi, .mr { font-family: Kohinoor Devanagari, Devanagari Sangam MN, sans-serif }
.kn { font-family: Noto Sans Kannada, Kannada Sangam MN, sans-serif }
.ml { font-family: Malayalam Sangam MN, Malayalam MN, sans-serif }
.or { font-family: Noto Sans Oriya, Oriya Sangam MN, sans-serif }
.pa { font-family: Mukta Mahee, Gurmukhi Sangam MN, sans-serif }
.ta { font-family: Tamil Sangam MN, InaiMathi, Tamil MN, sans-serif }
.te { font-family: Kohinoor Telugu, Telugu Sangam MN, sans-serif }
.th { font-family: Thonburi, Noto Sans Thai, sans-serif }
.ja { font-family: Hiragino Sans, Hiragino Kaku Gothic ProN, sans-serif }
.ko { font-family: Apple SD Gothic Neo, Noto Sans KR, sans-serif }
.zh-Hans { font-family: PingFang SC, Heiti SC, sans-serif }
.zh-Hant { font-family: PingFang TC, Heiti TC, sans-serif }
.te { font-weight: 500 }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The captions. Drawn twice at the end of the file: the shadow, then the gold. A long
word would carry its own smaller font-size and letter-spacing. Urdu says lang="ur" and is
drawn in Nastaliq. zh-Hans and zh-Hant keep two captions
with the same word: each takes its own font. -->
<g id="caption" class="caption" text-anchor="middle" font-family="Helvetica Neue, Helvetica, -apple-system, sans-serif" font-weight="600" font-size="52" letter-spacing="6.8">
<text class="default" x="259.4" y="466">STAR</text>
<text class="ar" x="259.4" y="466">نجمة</text>
<text class="bg ru" x="259.4" y="466">ЗВЕЗДА</text>
<text class="bn" x="259.4" y="466">তারা</text>
<text class="ca es" x="259.4" y="466">ESTRELLA</text>
<text class="cs" x="259.4" y="466">HVĚZDA</text>
<text class="da nb" x="259.4" y="466">STJERNE</text>
<text class="de" x="259.4" y="466">STERN</text>
<text class="el" x="259.4" y="466">ΑΣΤΕΡΙ</text>
<text class="fi" x="259.4" y="466">TÄHTI</text>
<text class="fr" x="259.4" y="466">ÉTOILE</text>
<text class="gu" x="259.4" y="466">તારો</text>
<text class="he" x="259.4" y="466">כוכב</text>
<text class="hi mr" x="259.4" y="466">तारा</text>
<text class="hr" x="259.4" y="466">ZVIJEZDA</text>
<text class="hu" x="259.4" y="466">CSILLAG</text>
<text class="id ms" x="259.4" y="466">BINTANG</text>
<text class="it" x="259.4" y="466">STELLA</text>
<text class="ja" x="259.4" y="466">星</text>
<text class="kk" x="259.4" y="466">ЖҰЛДЫЗ</text>
<text class="kn" x="259.4" y="466">ನಕ್ಷತ್ರ</text>
<text class="ko" x="259.4" y="466">별</text>
<text class="lt" x="259.4" y="466">ŽVAIGŽDĖ</text>
<text class="ml" x="259.4" y="466">നക്ഷത്രം</text>
<text class="nl" x="259.4" y="466">STER</text>
<text class="or" x="259.4" y="466">ତାରା</text>
<text class="pa" x="259.4" y="466">ਤਾਰਾ</text>
<text class="pl" x="259.4" y="466">GWIAZDA</text>
<text class="pt-BR pt-PT" x="259.4" y="466">ESTRELA</text>
<text class="ro" x="259.4" y="466">STEA</text>
<text class="sk" x="259.4" y="466">HVIEZDA</text>
<text class="sl" x="259.4" y="466">ZVEZDA</text>
<text class="sv" x="259.4" y="466">STJÄRNA</text>
<text class="ta" x="259.4" y="466">நட்சத்திரம்</text>
<text class="te" x="259.4" y="466">నక్షత్రం</text>
<text class="th" x="259.4" y="466">ดาว</text>
<text class="tr" x="259.4" y="466">YILDIZ</text>
<text class="uk" x="259.4" y="466">ЗІРКА</text>
<text class="ur" lang="ur" x="259.4" y="466">ستارہ</text>
<text class="vi" x="259.4" y="466">NGÔI SAO</text>
<text class="zh-Hans" x="259.4" y="466">星星</text>
<text class="zh-Hant" x="259.4" y="466">星星</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<path class="shadow-glyph" d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#0E0D22" stroke-width="19" stroke-linejoin="round" opacity="0.45" transform="translate(3,5)"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="url(#gold)" stroke-width="19" stroke-linejoin="round"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#FFF6DA" stroke-width="4.5" stroke-linejoin="round" opacity="0.4" transform="translate(-2,-3)"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
<use href="#caption" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(2,4)"/>
<use href="#caption" class="gold-text" fill="#CA9E41"/>
</svg>
```
In a set this SVG is the image's `svg` string (on one line, `"` written `\"`). The image's `name` and
`nameTranslations` carry the same words as the captions, in ordinary case ("Star", "Звезда", "Étoile", …).
Every picture of the set lists the same languages.
### 8c. The cover of the set in 8b
The same medallion with a question mark instead of the subject (section 2, "The cover"); in a set it gets
`"cover": true`. Two marks: `?`, and `؟` for Arabic and Urdu. A cover may show anything else the user asks
for; this one is what to draw when the user does not say.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme: the same rules as every picture of the set. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
/* Language. Two marks: "?" for every language, the Arabic question mark for Arabic and Urdu. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, ur) .default { display: none }
:lang(ar) .ar, :lang(ur) .ur
{ display: inline }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The question mark, where the other pictures have their subject. Drawn twice below: the
shadow, then the gold. The marks differ in shape (Arabic ؟ in Naskh, Urdu ؟ in Nastaliq), so
each has its own size and place: the same ink box as "?". -->
<g id="mark" class="caption" text-anchor="middle" font-family="system-ui, -apple-system, sans-serif" font-weight="bold">
<text class="default" x="258" y="323.8" font-size="323">?</text>
<text class="ar" lang="ar" x="254.2" y="329.6" font-size="294.1">؟</text>
<text class="ur" lang="ur" x="258.4" y="325.6" font-size="317.3">؟</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<use href="#mark" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(3,5)"/>
<use href="#mark" class="gold-text" fill="#E2C378"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
</svg>
```
### 8d. One SVG picture with theme colours (style sheet)
The plate takes the theme's surface colour, the moon the accent colour, soft in dark versions; the second
values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<style>
.plate { fill: var(--ic-surface, #dddddd) }
.moon { fill: var(--ic-accent, #e53935) }
.ic-dark .moon { fill: var(--ic-soft, #e53935) }
.cut { fill: var(--ic-surface, #dddddd) }
</style>
<rect class="plate" width="100" height="100" rx="12"/>
<circle class="moon" cx="46" cy="48" r="28"/>
<circle class="cut" cx="59" cy="39" r="23"/>
</svg>
```
### 8e. One SVG picture with theme colours (ids)
The plate takes the theme's surface colour, the house the text colour, the door the accent colour; the sun is
accent in light versions and soft in dark versions. The written `fill` values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<rect id="ic-surface" width="100" height="100" rx="12" fill="#eeeeee"/>
<g id="ic-text">
<path d="M16 52 L50 22 L84 52 Z" fill="#333333"/>
<rect x="26" y="52" width="48" height="30" fill="#333333"/>
</g>
<rect id="ic-accent" x="44" y="60" width="12" height="22" fill="#e53935"/>
<circle id="ic-light-accent-dark-soft" cx="82" cy="18" r="8" fill="#f9a825"/>
</svg>
```
### 8f. A small set with captions in three languages, and a cover
The user writes in English and asks for captions in English, German and Russian, and for a cover. The
default caption is the English word, so `en` is in no rule. Ordinary case, `sans-serif`, no letter-spacing;
the long Russian word has its own smaller size. Both pictures to guess have the same style sheet. The
cover's mark follows the app language, whatever the languages of the captions: `؟` in Arabic and Urdu, `?`
in every other. No theme rules: every picture has an opaque plate.
```json
{
"intuitionCheckSet": 1,
"name": "Simple shapes",
"nameTranslations": {"de": "Einfache Formen", "ru": "Простые фигуры"},
"images": [
{ "name": "Circle", "nameTranslations": {"de": "Kreis", "ru": "Круг"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"42\" r=\"28\" fill=\"#e53935\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Circle</text><text class=\"de\" x=\"50\" y=\"91\">Kreis</text><text class=\"ru\" x=\"50\" y=\"91\">Круг</text></g></svg>" },
{ "name": "Triangle", "nameTranslations": {"de": "Dreieck", "ru": "Треугольник"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 12 L82 70 L18 70 Z\" fill=\"#1565c0\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Triangle</text><text class=\"de\" x=\"50\" y=\"91\">Dreieck</text><text class=\"ru\" x=\"50\" y=\"91\" font-size=\"10.5\">Треугольник</text></g></svg>" },
{ "name": "Question mark", "nameTranslations": {"de": "Fragezeichen", "ru": "Знак вопроса"}, "cover": true, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(ar,ur) .default{display:none}:lang(ar) .ar,:lang(ur) .ur{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#eeeeee\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"system-ui, -apple-system, sans-serif\" font-weight=\"bold\" fill=\"#555555\"><text class=\"default\" x=\"50.4\" y=\"72.4\" font-size=\"64\">?</text><text class=\"ar\" lang=\"ar\" x=\"49.6\" y=\"73.7\" font-size=\"58\">؟</text><text class=\"ur\" lang=\"ur\" x=\"50.5\" y=\"72.8\" font-size=\"62.9\">؟</text></g></svg>" }
]
}
```
Indice
Brevi guide alle cose principali che puoi fare in Intuition Check e su come contattarci.
- Intuizione
- Come funziona l’app
- Set da indovinare
- Inviare i set
- Gioco con un partner
- Statistiche
- Come leggere i risultati
- Il tuo stato
- Aspetto e funzionalità
- Ora gratuita e abbonamento
- I tuoi dati
- I tuoi set creati con l’IA
- Cronologia versioni
- Informativa sulla privacy
Se qualcosa non funziona
Scrivici a [email protected] e ti risponderemo. Il modo più rapido è Impostazioni → Informazioni → Contatta l’assistenza: apre una bozza nella tua app di posta in cui sono già indicati la versione e la build dell’app, il modello del tuo dispositivo e la tua versione di iOS.
Non c’è un modulo di assistenza né un sistema di ticket. L’app non raccoglie nulla, quindi tutto ciò che dobbiamo sapere deve arrivare da te.
Cosa scrivere nel messaggio
- Cosa hai fatto, cosa ti aspettavi e cosa è successo invece.
- La versione dell’app, in Impostazioni → Informazioni → Versione.
- Il modello del tuo dispositivo e la versione di iOS.
Una bozza aperta con “Contatta l’assistenza” contiene già la versione, il modello e la versione di iOS.
Risoluzione dei problemi
- I due dispositivi non si trovano a vicenda: Se i dispositivi non si trovano a vicenda.
- Le statistiche sono sparite alla riapertura dell’app: Conservare le statistiche.
- Nelle statistiche non compare nulla: Che cosa viene registrato.
- Nel selettore manca un set: Il selettore dei set.
Fonti
- Kahneman, D., & Klein, G. (2009). American Psychologist, 64(6), 515–526. Conditions for intuitive expertise: A failure to disagree [Condizioni per la competenza intuitiva: un mancato disaccordo]
Una rassegna scritta insieme da due studiosi di primo piano dell’intuizione, di scuole opposte, sulla rivista dell’Associazione americana di psicologia.
https://doi.org/10.1037/a0016755 - Cardeña, E. (2018). American Psychologist, 73(5), 663–677. The experimental evidence for parapsychological phenomena: A review [Le prove sperimentali dei fenomeni parapsicologici: una rassegna]
Una rassegna di molti studi, scritta da uno psicologo che ritiene solide le prove, sulla rivista dell’Associazione americana di psicologia.
https://doi.org/10.1037/amp0000236 - Reber, A. S., & Alcock, J. E. (2020). American Psychologist, 75(3), 391–399. Searching for the impossible: Parapsychology's elusive quest [Alla ricerca dell’impossibile: l’obiettivo sfuggente della parapsicologia]
La replica alla rassegna qui sopra, scritta da due psicologi che negano effetti di questo tipo, sulla stessa rivista.
https://doi.org/10.1037/amp0000486 - Sheldrake, R. (2000). Journal of the Society for Psychical Research, 64, 224–232. Telepathic telephone calls: Two surveys [Telefonate telepatiche: due sondaggi]
Sondaggi telefonici su famiglie scelte a caso a Londra e a Bury, in Inghilterra, condotti da un ricercatore secondo cui la telepatia esiste, su una rivista di parapsicologia.
https://www.sheldrake.org/files/pdfs/papers/Telepathic-Telephone-Calls-Two-Surveys.pdf - Brown, D. J., & Sheldrake, R. (2001). Journal of Parapsychology, 65, 145–156. The anticipation of telephone calls: A survey in California [Il presentimento delle telefonate: un sondaggio in California]
Un sondaggio telefonico su 200 persone scelte a caso, condotto dallo stesso ricercatore con un coautore, su una rivista di parapsicologia.
https://www.sheldrake.org/files/pdfs/papers/The-Anticipation-of-Telephone-Calls-A-Survey-in-California.pdf - Cottrell, J. E., Winer, G. A., & Smith, M. C. (1996). Developmental Psychology, 32(1), 50–61. Beliefs of children and adults about feeling stares of unseen others [Le convinzioni di bambini e adulti sul sentire lo sguardo di chi non si vede]
Tre studi con bambini e adulti, su una rivista dell’Associazione americana di psicologia.
https://doi.org/10.1037/0012-1649.32.1.50 - Born, J., Hansen, K., Marshall, L., Mölle, M., & Fehm, H. L. (1999). Nature, 397, 29–30. Timing the end of nocturnal sleep [Programmare la fine del sonno notturno]
Un esperimento con 15 volontari, sulla rivista Nature.
https://doi.org/10.1038/16166 - Sio, U. N., & Ormerod, T. C. (2009). Psychological Bulletin, 135(1), 94–120. Does incubation enhance problem solving? A meta-analytic review [L’incubazione migliora la risoluzione dei problemi? Una rassegna metanalitica]
Una rassegna che riunisce i risultati di molti esperimenti, su una rivista dell’Associazione americana di psicologia.
https://doi.org/10.1037/a0014212 - Wagner, U., Gais, S., Haider, H., Verleger, R., & Born, J. (2004). Nature, 427, 352–355. Sleep inspires insight [Il sonno ispira le intuizioni]
Un esperimento sulla rivista Nature; i tentativi successivi di ripeterlo hanno dato risultati contrastanti.
https://doi.org/10.1038/nature02223 - Ambady, N., & Rosenthal, R. (1993). Journal of Personality and Social Psychology, 64(3), 431–441. Half a minute: Predicting teacher evaluations from thin slices of nonverbal behavior and physical attractiveness [Mezzo minuto: prevedere i giudizi sugli insegnanti da brevi frammenti di comportamento non verbale e dall’attrattività fisica]
Tre studi — il principale con 13 insegnanti — su una rivista dell’Associazione americana di psicologia.
https://doi.org/10.1037/0022-3514.64.3.431 - Diaconis, P., & Mosteller, F. (1989). Journal of the American Statistical Association, 84(408), 853–861. Methods for studying coincidences [Metodi per lo studio delle coincidenze]
Un articolo di due statistici su come nascono le coincidenze, sulla rivista dell’Associazione americana di statistica.
https://doi.org/10.1080/01621459.1989.10478847 - Wilson, T. D., Lisle, D. J., Schooler, J. W., Hodges, S. D., Klaaren, K. J., & LaFleur, S. J. (1993). Personality and Social Psychology Bulletin, 19(3), 331–339. Introspecting about reasons can reduce post-choice satisfaction [Riflettere sui motivi può ridurre la soddisfazione dopo una scelta]
Un esperimento, su una rivista di psicologia sociale.
https://doi.org/10.1177/0146167293193010 - Dunn, B. D., Galton, H. C., Morgan, R., Evans, D., Oliver, C., Meyer, M., Cusack, R., Lawrence, A. D., & Dalgleish, T. (2010). Psychological Science, 21(12), 1835–1844. Listening to your heart: How interoception shapes emotion experience and intuitive decision making [Ascoltare il proprio cuore: come l’interocezione plasma l’esperienza delle emozioni e le decisioni intuitive]
Due esperimenti, su una rivista dell’Associazione per la scienza psicologica.
https://doi.org/10.1177/0956797610389191
Crediti
Illustrazioni delle carte da gioco di Adrian Kennard, rilasciate in CC0 Public Domain. Generatore e codice sorgente su me.uk/cards.