Intuition Check
直感を試し、鍛えるための、iPhone・iPad・Appleシリコン搭載Mac向けのシンプルでプライバシーを守るアプリ。トランプ・数字・画像で勘を練習できます——1人でも、近くにいるパートナーとでも。
App Storeからダウンロード → AIで作る自分のセット →直感
直感とは何か
直感とは、どうしてわかるのかを説明できないまま、何かがわかることです。予感、勘、突然の確信がそれにあたります。
直感のうち、ある種類のものについては、心理学者が詳しく説明しています。それは、思考より速く働く経験です。何かを何度もやってきた人は、言葉で説明できるようになる前にパターンに気づきます。まず感覚が来て、言葉はあとからついてくるのです1。
多くの人は、2つ目の種類についても語ります。どんな経験からも知りえなかったはずのことがわかる、というものです。たとえば、電話に名前が表示される前に誰からかわかる、伏せてあるトランプのカードが何かわかる、といったことです。この種類の直感が存在するかどうかは、科学の世界で議論が続いています23。このアプリでは、ランダムに選ばれた値を使って、まさにこの2つ目の種類を確かめることができます。
どんなふうに現れることがあるか
次のような瞬間は、多くの人に覚えがあります:
- 誰かのことを考えた直後に、その人から電話がかかってきます。
- 友達に電話しようと電話を手に取ると、その電話が手の中で鳴ります。かけてきたのは、その友達です。
- アラームが鳴る2、3分前に目が覚めます。
- 画面を見る前に、誰からの電話かわかります。
- 長いあいだ会っていない人のことを思い出すと、その日のうちにその人から電話がかかってきます。
- 人に対する第一印象が、あとで正しかったとわかります。
- 朝、シャワーの最中、散歩の途中に、問題の答えがひとりでに浮かんできます。
- 誰かに見られている気がして振り返ると、本当に誰かがこちらを見ています。
イングランドとカリフォルニアで、ランダムに選ばれた人たちを対象に行われた電話調査では、65%から78%の人が、電話をかけた相手に「ちょうどかけようとしていたところだった」と言われたことがあると答え、47〜49%の人が、何の手がかりもないのに誰からの電話かわかったことがあると答えました45。大人の大半は、自分からは見えない誰かに見られているとき、それを感じ取れると信じています6。
これらの中には、理由がわかっているものもあります。体は、起きるつもりの時刻を把握しておくことができます。ある実験では、体を目覚めに備えさせるホルモンが、起こすと告げられていた時刻のおよそ1時間前から増え始めました7。ひと休みが、問題を解く助けになることもあります。多くの実験で、人は問題をしばらく脇に置いたあとのほうが、うまく解けていました8。また、ある研究では、一晩眠ることで、課題を速く解けるようにする隠れた規則を見つけた人の割合が2倍を超えました9。そして、第一印象が当たることもあります。ある教師を知らない人たちが、音を消した状態でその教師の様子を合計30秒見て、学期末にその教師の学生たちがしたのとよく似た評価をしました10。
一度や二度か、何度もか
一度や二度なら、こうした一致はただの偶然だと片づけやすいものです。それが何度も起こると、偶然以上の何かがあるのではないかと考えるのは自然なことです。
ここでは、記憶は数を数えるのが苦手です。電話が鳴ったときのことは覚えていても、誰かのことを考えたのに何も起こらなかった数多くの場面は忘れてしまいます。それに、日にちも、人も、頭に浮かぶ考えも十分に多ければ、驚くような偶然の一致がときどき起こるのは避けられません11。
だからこそ、数えることが役に立ちます。このアプリでは、偶然で当たる確率が正確にわかります。その確率は、出る可能性のある値がいくつあるかだけで決まります。統計を見れば、結果が偶然で得られる範囲に収まっているか、そこからずれているかがわかります。詳しくは結果の読み方をご覧ください。
日常生活の中の直感
感情や体からの信号は、多くの判断に関わっています。気に入ったポスターをただ選んだ人たちは、先にそれぞれのポスターを気に入った理由や気に入らない理由を挙げるよう求められた人たちよりも、3週間後、選んだポスターに満足していました12。別の実験では、参加者が4つの山札を使うカードゲームをしました。2つの山札は続けるうちに得になり、残りの2つは損になるようになっていましたが、どれがどちらなのかは参加者に知らされていませんでした。体はカードを引く前に毎回反応し、その信号がどちらに傾くかは人によって違いました。全体として見ると、ある人たちでは得になる山札のほうへ、別の人たちでは損になる山札のほうへ傾いていたのです。研究者たちは、それぞれの人が体の信号をどれだけよく感じ取れるかを、自分の心臓の鼓動をどれだけ正確に感じられるかで測りました。その感覚が正確な人ほど、良くも悪くも、その人の選択は体の信号によく沿っていました13。
直感がいちばん当てになるのは、頼りにできる本当のパターンがあり、すばやくはっきりしたフィードバックが得られるところです。強い確信があっても、それだけでは正しいというしるしにはなりません1。
ですから、自分の直感とよい関係を保つとは、2つのことを意味します。直感に気づくこと、そして、いつ直感を信頼できるかを学ぶことです。いつ信頼できるかを学ぶには、プレイしながら自分の状態を記録してください。すると統計が、ラウンドを状態別・時間帯別に比べるので、どんなときに成績がよいかがわかります。あなたの状態をご覧ください。
偶然以上の何かはあるのか
人が、どんな経験からも知りえないことを知ることができるのかどうか、科学では決着がついていません。2018年には、アメリカ心理学会の主要な機関誌に掲載されたレビュー論文が、このような現象を支持する証拠は、心理学で認められている研究結果の証拠とほぼ同じくらい強いと結論づけました2。これに応えて同じ機関誌に掲載された論文は、このような現象はありえず、結果にはほかの原因があるはずだと主張しました3。この問いは未解決のままです。そしてこのアプリでは、自分のラウンドを使ってこの問いを調べてみることができます。
アプリの仕組み
ラウンドの流れ
予想セット——トランプ・数字・画像のセット——を選び、値が表示される前に、それを感じ取ってみてください。次に値を表示して、当たっていたかどうかを確かめます。アプリは的中の数を数え、純粋な偶然で得られる数と比べます。
受動的直感と能動的直感
アプリには2つのモードがあります:
- 受動的直感:値はすでに選ばれていて、隠されています。それが何かを読み取ろうとします。
- 能動的直感:表示するまで、何も選ばれていません。出てほしい値を念じて、引き出そうとします。
統計では2つのモードが分けて集計されるので、どちらが自分に合っているかがわかります。
プレイの仕方は3通り
プレイスタイルとモードは、メイン画面の上部にあるスイッチャーで選びます。同じ選択肢は「設定」→「プレイスタイルとモード」にもあります。
1つずつ
値は一度に1つです。タップすると表示され、もう一度タップすると隠れ、続いて次の値を表示します。「設定」→「1つずつ」で「隠さずに表示」をオンにすると、タップするたびにすぐ次の値が表示されます。「ヒントを表示」をオンにすると、値の下に案内が1行表示されます。
「予想の記録」の「方法」が「予想を入力」になっていると(最初はこの設定です)、表示のたびにまず予想を尋ねられ、アプリがそのラウンドを自動で判定します。詳しくは記録される内容をご覧ください。
クイック選択
セットのすべての値が、1つのグリッドに並びます。1回のタップが、それぞれ1つのラウンドです。能動的直感モードでは、タップした瞬間に値がランダムに選ばれます。受動的直感モードでは、前のタップの直後に、前もって選ばれます。的中は、緑の点滅と振動で知らせることができます。
値が1,000個を超える数字のセットには、グリッドはありません。セットの設定で範囲を狭めるか、「1つずつ」でプレイしてください。
シリーズ
能動的直感モードで、望む値を1つ選んで念じ、その値をタップします。するとアプリが値のシリーズを引き、そのうちいくつがタップした値と一致したかを数えます。1つのシリーズで引く値の数は、2〜12、または100、1,000、1万、10万、100万、1000万にできます。長さはメイン画面で設定します。「設定」→「シリーズ」の「シリーズの時間」スライダを使うと、引く値を最大10秒にわたって分散できます。0にすると、休止は入りません。各シリーズは、統計に1件の記録として入ります。
「シリーズ」を選ぶと、モードは能動的直感に切り替わります。
トランプと数字
トランプのセットでは、36枚または52枚のトランプを使い、ジョーカーを含めるかどうかも選べます。数字のセットでは、9桁までの数字を使います。最大桁数は自分で選べます。どちらも、その予想セットの設定画面で変更します。メイン画面で、セットのスイッチャーの隣にある歯車をタップしてください。
シンプル表示
メイン画面のどこかを長押しすると、スイッチャー・ツールバー・状態バー・ヒントが隠れます。もう一度長押しすると、元に戻ります。ラウンド数と結果は表示されたままです。
「設定」→「外観とフィードバック」の「シンプル表示」では、「ボタンを表示」でツールバーに目のアイコンのボタンが加わり、そのボタンをタップするとシンプル表示になります。また、「シンプル表示を記憶」で、アプリを起動し直してもシンプル表示のままになります。
ラウンド数
メイン画面には、プレイしたラウンド数と成績を表示できます。モードとプレイスタイルの組み合わせごとにラウンド数と結果が1つずつあり、ラウンド数をリセットして結果を消去するボタンもあります。別の予想セットに切り替えたときも、すべてのラウンド数と結果がリセットされます。
アプリを起動し直してもラウンド数と結果を残すには、「設定」→「統計」で「ラウンド数と結果を保存」をオンにします。この設定は、「統計をデバイスに保存」がオンの間使えます。
予想セット
予想セットは、予想の対象になるもので、トランプ・数字・画像のセットがあります。最初、メイン画面には「数字」と「トランプ」だけが表示されます。アプリに付属するほかのセットは、メイン画面のセットのスイッチャーの隣にあるをタップして追加できます。
セットのスイッチャー
メイン画面の上部にあるスイッチャーには、自分の予想セットが表示されます。「スイッチャーのスタイル」がデフォルトのままなら、表示するセットが1つか2つのときはボタン、3つ以上では今のセットの名前が表示され、そこからセットの一覧が開きます。「スイッチャーのスタイル」で「別画面」を選ぶと、スイッチャーは常にこの一覧を開きます。
セットにはそれぞれ専用の「使用」スイッチがあります。このスイッチがオフのセットは、どこにも出てきません。メイン画面のセットのスイッチャーにも、パートナーゲームにも、統計にも出てきません。ただし、「設定」→「予想セット」→「予想セットを管理」のセットの一覧には残り、スイッチをもう一度オンにすると、そのセットの統計も戻ります。
スイッチャーの隣にあるボタンは、「セットを追加」画面を開きます。そこには、アプリに付属する追加のセットが並んでいて、メイン画面に追加できます。その下には、空のセットを作るボタン(そのセットには、あとから自分の画像を追加できます)と、AIアシスタントが作ったセットを追加するための「お使いのAIアシスタント」セクションがあります。スイッチャーの隣にある歯車ボタンは、現在選択しているセットの設定を開きます。どちらのボタンも、「設定」→「予想セット」の「セット追加ボタンを表示」と「セットの設定ボタンを表示」で隠せます。
既製セット
メイン画面のセットのスイッチャーの隣にあるをタップします。または、「設定」→「予想セット」→「予想セットを管理」を開いてをタップし、「既製セット」を選びます。セットを開いて「自分の予想セットに追加」をタップしてください。
追加したセットは、自分専用のコピーです。名前を変えたり、画像を並べ替えたり、一部の画像をゲームで使わないようにしたり、パートナーとプレイしたり、誰かに送ったりできます。
自分の画像で作るセット
メイン画面からの場合:スイッチャーの隣にあるをタップし、既製セットの下にある「空の画像セット」をタップします。名前は「自分の画像」のままにするか、別の名前を入力して、「作成」をタップします。アプリは新しいセットに切り替わり、そのセットを開きます。
または、「設定」→「予想セット」→「予想セットを管理」を開いてをタップし、「空の画像セット」を選んでから、セットに名前を付けて「作成」をタップします。新しいセットが開きます。
セットの中でをタップし、「写真」または「ファイル」から画像を追加します(一度に複数選べます)。「カメラ」で1枚ずつ撮ることも、コピーした画像やSVGを「クリップボードからペースト」で追加することもできます。
画像の名前
セットの画面で画像をタップすると、大きく表示されます。その下の欄が「名前」です。名前を入力したり、変更したり、消去したりできます。「ファイル」から追加した画像は、最初は拡張子を除いたファイル名になり、「写真」や「カメラ」から追加した画像と、「クリップボードからペースト」で追加した画像には、最初は名前がありません。複数の言語の名前があるセットでは、欄の下の「言語別の名前」に、それぞれの言語での画像の名前があります。画像の下には、アプリが保存しているファイルの形式とサイズが表示されます。
AIアシスタントに、画像やセット全体を作ってもらうこともできます:AIで作る自分のセット。
並び順・レイアウト・ゲームで使う画像
セット自体の画面の「並べ替え」では、画像をドラッグして並べ替えたり、グリッドの「1行あたりの画像数」、「配置」、「全体を表示」を設定したりできます。
画像を長押しすると、ほかの操作もできます:
- 「ゲームで使わない」を選ぶと、画像はセットに残ったまま、ランダムに選ばれることはなくなります。「ゲームで使う」を選ぶと元に戻ります。
- 「?」プレースホルダにするという項目を選ぶと、「1つずつ」で値がまだ隠れている間、その画像が表示されます。その画像自体がランダムに選ばれることはありません。「?」プレースホルダは、各セットに1つまでです。
名前の変更と削除
セットの名前は、セットの画面の最初の欄です。既製セットでは、ここを編集すると変わるのは、アプリの現在の言語での名前です。ほかの言語での名前は「言語別の名前」にあります。
セットを削除するには、「設定」→「予想セット」→「予想セットを管理」のセットの一覧でセットをスワイプするか長押しして、「削除」を選びます。削除の前に確認が表示されます。セットの統計も一緒に削除されます。
セットを送る
セットを送るには
自分の画像のセットは、拡張子が.guessetの1つのファイルとして送れます。このファイルには、画像、その並び順、レイアウト、セットの名前、そしてどの画像をゲームで使い、どれが「?」プレースホルダかが含まれます。「トランプ」と「数字」はアプリに組み込まれているので、送ることはできません。
- 「設定」→「予想セット」→「予想セットを管理」を開きます。
- セットを長押しして、「書き出す…」を選びます。セットの中にある共有ボタンでも同じことができます。
- 送る方法を選びます:「メール」、「メッセージ」、AirDrop、「ファイル」、またはほかのアプリ。
近くにいる人とセットを使ってプレイするのに、ファイルは必要ありません。自分の画像でプレイするをご覧ください。
送られてきたセットを開く
「メール」、「メッセージ」、または「ファイル」で、.guessetファイルをタップするか、AirDropで送られてきたものを受け入れて、Intuition Checkで開きます。セットは自分だけの独立したコピーになり、一覧の最後とスイッチャーに表示されます。
すでにデバイスに保存されているファイルは、アプリの中から読み込むこともできます。「設定」→「予想セット」→「予想セットを管理」でをタップし、「ファイルから読み込む」を選んでください。
パートナーゲーム
仕組み
2台のデバイスで一緒にプレイします。1人が値を選び、もう1人がそれを当てようとします。2台のデバイスはお互いとだけ通信します(近くにあるときはデバイス同士で、または共通のWi‑Fiネットワーク経由で)。パートナーゲームのラウンドは統計に入りません。
接続
両方のデバイスでWi‑Fiをオンにしてください。同じWi‑Fiネットワークにつながっていると接続がいちばんうまくいき、そのネットワーク上であれば、デバイスがどこにあってもかまいません。共有のネットワークがない場合は、デバイス同士で接続します。デバイスを近くに置いてください。
デバイスが互いを探すのは、両方でパートナーゲームが開いている間だけです。
始め方
- 両方のデバイスでパートナーゲームを開きます。メイン画面のツールバーにある2人のアイコンのボタンをタップするか、「設定」→「パートナーゲーム」で「パートナーゲームを開く」をタップしてください。ボタンが見当たらない場合は、「設定」→「パートナーゲーム」で「パートナーゲームボタンを表示」をオンにしてください。
- どちらのデバイスにも「近くのパートナーを探しています…」と表示され、続いて「近くで見つかったデバイス:」の下に相手のデバイスが表示されます。接続は自動的に行われます。
初めてのときは、アプリがローカルネットワーク上のデバイスを探してもよいかどうかを、デバイスが尋ねてきます。許可してください。許可しないと、デバイス同士が互いを見つけられません。
ラウンドの流れ
- 「使うセット:」の下で、何でプレイするかを選びます。使用中の予想セットなら、どれでもかまいません。
- 役割として、「カードを選ぶ」(または数字、画像)か「当ててみる」を選びます。パートナーはもう一方の役割になります。
- 選ぶ側が値を選び、当てる側が予想します。すると両方のデバイスに、選ばれた値と予想した値が、「正解!」または「今回は違いました」とともに表示されます。
- 「もう一度プレイ」をタップすると、2人とも最初の手順に戻り、次のラウンドで何でプレイするかと役割を選びます。
自分の画像でプレイする
自分の画像セットでプレイするときは、パートナーが同じセットをすでに持っている場合を除き、まずパートナーに「ダウンロード」でセットを受け取るよう求める表示が出ます。パートナー側のコピーはパートナーゲームでだけ使われ、パートナー自身のセットが変わることはありません。送られるのは、パートナーがまだ持っていない画像だけです。
「設定」→「パートナーゲーム」で「受け取った画像セットを残す」がオンになっていれば、同じパートナーとの次のゲームは、待たずに始まります。オフの場合、受け取ったセットは、パートナーゲームを閉じると削除されます。受け取ったセットは「設定」→「予想セット」→「予想セットを管理」の「パートナーから受け取ったセット」に表示され、そこで「自分の予想セットに追加」を選ぶと、完全に自分のものになるコピーが作られます。
パートナーの名前
iPhoneとiPadでは、アプリから見えるのは「iPhone」のような一般的なデバイス名だけなので、2台のデバイスが同じに見えることがあります。接続したら、パートナーの名前の隣にある鉛筆をタップして、好きな名前を入力してください。その名前は、自分のデバイスにだけ表示されます。
デバイス同士が見つからないとき
- 両方のデバイスで、Wi‑Fiをオンにした状態でパートナーゲームを開いてください。
- できれば両方のデバイスを同じWi‑Fiネットワークにつないでください。それができない場合は、デバイスを近くに置いてください。
- ホテル、カフェ、オフィスなどのゲストネットワークや公共のネットワークでは、デバイス間の通信がブロックされていることがよくあります。別のネットワークを試すか、ネットワークを使わずに、デバイスを並べて置いてみてください。
- ローカルネットワークへのアクセスを求められて許可しなかった場合は、「設定」アプリでオンに戻せます。「プライバシーとセキュリティ」→「ローカルネットワーク」を開き、Intuition Checkをオンにしてください。
- デバイスが「近くで見つかったデバイス:」の下に表示されるのに接続されない場合は、両方のデバイスでパートナーゲームを閉じて、もう一度開いてください。検索が最初からやり直されます。
- 一度に一緒にプレイできるのは2台のデバイスだけです。3台目は、ペアのどちらかが抜けるまで探し続けます。
統計
記録される内容
「クイック選択」と「シリーズ」では、ラウンドは常に記録されます。「1つずつ」では、「設定」→「1つずつ」にある「予想の記録」の「方法」の設定に応じて記録されます:
- 「予想を入力」:デフォルトです。表示の前に予想を選ぶと、アプリがそのラウンドを判定します。
- 「自分で判定」:表示するたびに、✓または✗をタップします。判定せずに飛ばした表示は集計されません。
- 「オフ」:「1つずつ」では何も記録されません。
取りうる値が1つしかない予想セットでは、何も記録されません。パートナーゲームのラウンドが記録されることはありません。
統計を見る
メイン画面のツールバーにある統計ボタンをタップするか、「設定」→「統計」で「統計を表示」をタップします。統計は、プレイ中の予想セット・プレイスタイル・モードで開きます。上部のフィルタを使うと、「期間」、「予想セット」、「プレイスタイル」、「モード」、そして状態を記録している間は「状態」で絞り込めます。
必要のないセクションは、統計の設定画面でオフにできます。この画面は、統計画面の設定ボタンから、またはメイン画面から「設定」→「統計」で開けます。
数値の意味については、結果の読み方をご覧ください。
統計を残すには
最初の状態では、統計は現在のセッションの間だけ、メモリ上にのみ保持されます。アプリが終了すると消去され、iOSがバックグラウンドでアプリを終了した場合も同じです。残すには、統計画面のいちばん上、または「設定」→「統計」で、「統計をデバイスに保存」をオンにします。現在のセッションのラウンドも保存されます。以前のセッションで一度も保存されなかったラウンドは、取り戻せません。
このスイッチをオフにすると、保存した統計は削除されます。その前に、アプリが「統計の保存を停止しますか?」と確認します。「保存した統計を削除」をタップすると、残るのは、最後にアプリを開いてからプレイしたラウンドだけで、それもメモリ上にだけです。アプリを閉じると消えます。これは取り消せません。
消去
統計画面のいちばん下には、次の項目があります:
- 「…」のすべての統計を消去:フィルタで選んだ予想セットで記録されたすべての統計。
- 絞り込んだ統計の記録…件を削除:フィルタで表示されている記録だけ。
- すべての統計を消去:すべて。
アプリは、これらの削除をどれも実行する前に確認を求めます。どれも取り消せません。
書き出し
統計画面のツールバーにある共有ボタンをタップし、次に「統計をテキストファイルに書き出す」をタップします。ファイルは、フィルタで表示されている記録を過不足なく収めた表(CSV)です。1ラウンドにつき1行、「シリーズ」のプレイスタイルでは1シリーズにつき1行です。Numbersなどのスプレッドシートアプリで開けます。また、このファイルをお使いのAIアシスタントに見せて、たとえば「私の直感は、どんな状況でよりよく働き、どんな状況でより働きにくいようですか?」と尋ねてみるのも役に立つかもしれません。
結果の読み方
統計は、的中を数えるだけではありません。取りうる値の数が同じときにランダムな予想で得られる成績と、あなたの結果を比べ、偶然を上回っているか、下回っているか、偶然の範囲内かを、わかりやすい言葉で伝えます。
あなたの結果と偶然
「的中した予想」の下には、「あなたの結果」が「ランダムなら」と並んで表示されます。同じ30%でも、正反対の意味になることがあります。取りうる値が3つなら、ランダムな予想はおよそ33%当たるので、30%は偶然を少し下回ります。52枚のトランプなら、ランダムな予想はおよそ2%当たるので、30%は偶然を大きく上回ります。偶然の数値には、ラウンドごとの取りうる値の数が使われます。
判定
アプリは判定を示します。判定は「偶然の範囲内」から始まり、偶然よりわずかに高い・低い、明らかに高い・低いを経て、「偶然より大幅に高い」または「偶然より大幅に低い」まであります。また、ランダムな予想でそのような結果が出るのがどれくらい珍しいかも、たとえば「およそ300回に1回」のように示します。
ラウンド数が少ないと、偶然だけでも結果は大きく揺れます。そのため、判定はラウンドが増えるごとに安定していきます。
受動的直感と能動的直感の比較
両方のモードでラウンドがあると、「受動的直感と能動的直感の比較」にそれぞれの的中数と的中率が表示され、どちらが自分に合っているかがわかります。「シリーズ」では表示されません。
最高の連続的中
「最高の連続的中」には、続けて正解した最も長い記録が、日時と、そのとき記録していた状態とともに表示されます。「ラウンド間の最大間隔」(このセクションで設定します)より長い間が空くと、連続的中は途切れます。記録した状態が変わった場合も同じです。
推移
「的中率の推移」は、異なる2日にラウンドがあると、日ごとの的中率をグラフで表示します。「時間帯別」では、朝・昼・夕方・夜が別々に表示されます。
値
統計で予想セットを1つだけ見ていて、そのセットの値が100個までの場合は、最もよく当てた値と、予想として選ぶことが最も多い値・最も少ない値が表示されます。セットにある値の数と同じ回数だけ予想すると、一度も選んでいない値も含まれるようになります。
人は、ある値を選びがちで、別の値を避けがちなことがよくあります。また、ほかの値より正しく当てられることが多い値もあるかもしれません。
結果は変わることがある
結果は、自分の状態や状況によって変わるかもしれません。次に挙げることは、どれも確かめられた事実ではありません。プレイしながら気にかけておく価値のある可能性です:
- あなたの状態。起きた直後か夜遅くか、元気か疲れ気味か、平静かストレスがあるかで、成績が変わるかもしれません。プレイしながら状態を記録すると、統計がラウンドを状態別・時間帯別に比べます。
- 自信。自信に満ちているか、迷いでいっぱいかが、成績の出方と重なることもあり得ます。
- 偶然より低いのも、ずれです。偶然から予想されるより目立って当たりが少ないことも、偶然からのずれです。1つの解釈は、何も起きていないということではなく、そのとき直感が自分に逆らって働いている、というものです。
- 値。ほかの値と同じくらいよく選んでいても、ある値はほかの値よりずっと多く当てられ、ある値は一度も当てられないかもしれません。
数値からわかること
アプリにわかるのは、結果が純粋な偶然からずれているかどうかだけで、なぜなのかは決してわかりません。データから理由が明らかに見えるときでも同じです。数値は、自分を測る決まった物差しとしてではなく、探っていくためのものとして見てください。直感もあわせてご覧ください。
あなたの状態
状態バー
メイン画面の状態バーでは、今の自分の状態を記録できます。「元気」または「疲れ気味」、「平静」または「ストレスあり」、「自信あり」または「迷いあり」、「集中している」または「散漫」、気分、そして「起きたばかり」、「コーヒーの後」、「運動後」などの状況です。記録した内容は、変更するかリセットされるまで、それ以降にプレイするすべてのラウンドとあわせて記録されます。
すると統計で、ラウンドを状態別・時間帯別に比べられます。また、連続的中にはそれぞれ、そのとき記録していた状態が表示されます。結果は変わることがあるをご覧ください。
いつリセットされるか
「設定」→「あなたの状態」の「記録した状態のリセット」で決まります:
- 「アプリの起動時」:デフォルトです。次に起動したときは、何も記録されていない状態から始まります。
- 「休止後」:選んだ「休止時間」(15分〜1日)のあいだプレイしないと、リセットされます。
- 「しない」:変更するまで保持されます。
自分だけの状態
「設定」→「あなたの状態」→「状態を管理」では、状態の名前の変更・並べ替え・追加・非表示や、自分の軸の追加ができ、軸ごとの「使用」スイッチでその軸をオフにすることもできます。オフにした軸は状態バーから消え、新しいラウンドではその軸は記録されず、統計にもその軸は含まれません。
状態バーを完全になくすには、「ラウンド中の状態を記録」をオフにします。そうすると、状態は一切記録されません。
状態バーは、シンプル表示のとき、および「1つずつ」で「予想の記録」がオフのときには隠れます。
外観と機能
テーマ
「設定」→「外観とフィードバック」には4つのテーマがあります。「砂」、「海」、「森」、「夕暮れ」で、それぞれにライトとダークがあります。「外観」では「ライト」、「ダーク」、「システム」から選べます。「システム」にすると、アプリはデバイスの設定に従い、それに合わせて切り替わります。テーマによって、トランプと、既製セットのほとんどの画像の色も変わります。
フィードバック
「的中のフィードバック」の「バイブレーション」と「アニメーション」は、正解を振動と緑の点滅で知らせます。どちらもオフにできます。これらが働くのは、「クイック選択」ではすべてのタップ、「シリーズ」ではシリーズで引いた値がすべて的中したとき、「1つずつ」では表示の前に予想を入力したときです。外れたときは振動も点滅もしません。バイブレーションには、「設定」アプリの「サウンドと触覚」で「システムの触覚」がオンになっていることも必要です。
「タップ時のパルスアニメーション」は、「クイック選択」と「シリーズ」でタップしたマスと、ラウンドを自分で判定するときやラウンドを記録しないときに「1つずつ」で表示した値に、短いパルスアニメーションを付けます。
すっきりしたメイン画面
メイン画面にあるもののほとんどは、隠すことができます。それぞれのスイッチは、関係する「設定」の画面にあります:
- 「設定」→「プレイスタイルとモード」:「スイッチャーを表示」のスイッチが2つ(プレイスタイル用とモード用)。
- 「設定」→「予想セット」:「スイッチャーを表示」、「セット追加ボタンを表示」、「セットの設定ボタンを表示」。
- 「設定」→「クイック選択」:「グリッドオプションボタンを表示」。
- 「設定」→「1つずつ」:「ヒントを表示」。
- 「設定」→「シリーズ」:「シリーズの長さをメイン画面に表示」、「シリーズの時間をメイン画面に表示」、「グリッドオプションボタンを表示」(「設定」→「クイック選択」と同じスイッチ)。
- 「設定」→「あなたの状態」:「ラウンド中の状態を記録」。
- 「設定」→「統計」:「統計ボタンを表示」。
- 「設定」→「パートナーゲーム」:「パートナーゲームボタンを表示」。
- 各プレイスタイルの設定(「クイック選択」、「1つずつ」、「シリーズ」):「ラウンド数を表示」、「結果スイッチを表示」、「結果を表示」。
1つの予想セットだけをスイッチャーから外すには、そのセットの設定で「使用」をオフにします。すると、そのセットはパートナーゲームと統計からも外れます。また、シンプル表示をオンにすると、メイン画面の要素のほとんどを一度に隠せます。
機能
「設定」→「機能」には、「シリーズプレイスタイル」のスイッチと、「メイン画面のラウンド数と結果」のスイッチがあります。オフにした機能は、メイン画面からも「設定」からも消えます。
言語
「設定」→「言語」では、デバイスの言語とは別にアプリの言語を設定でき、数字や日付の書き方もここで決まります。一覧の「候補の言語」には、まずシステム言語が、続いてデバイスの言語のうちアプリが対応しているものが、デバイスで設定されている順に表示されます。ほかの言語はすべて、そのあとの「ほかの言語」に並びます。新しい言語の文字を読む向きが今までと逆の場合は、切り替えたあとにアプリを閉じてもう一度開いてください(書字方向は、アプリを起動し直したあとでないと正しく切り替わりません)。
「設定」の「言語」の行の下に、「設定内のヒントを表示」のスイッチがあります。各設定の下にある説明の表示・非表示を切り替えます。
無料の1時間とサブスクリプション
無料の1時間
アプリのダウンロードは無料で、アプリのすべてを試せるよう、アプリの利用時間が1時間含まれています。この1時間がカウントされるのは、アプリが画面上で開いている間だけで、すべてのセッションを通じて合計されます。アプリを閉じている間やバックグラウンドにある間は、時間は進みません。
1時間を使い切ると、サブスクリプション画面が自動的に開きます。登録するかどうかを決めるのに時間が足りなかった場合は、さらに時間を使えます。「無料の1時間をリセット」で、もう1時間使えます。これは3回までで、無料の時間は合計4時間です。
サブスクリプション
その後もアプリを使い続けるためのサブスクリプションがあり、「月額」と「年額」の2つのプランがあります。このサブスクリプションはファミリー共有に対応しています。
登録
「設定」→「サブスクリプション」→「登録」を開きます。
管理とキャンセル
サブスクリプションの請求はAppleが行います。「設定」→「サブスクリプション」→「サブスクリプションを管理」から自分のサブスクリプションに移動できます。このアプリのサブスクリプションは、通常の方法で、デバイスの設定にあるApple Accountのサブスクリプションからも管理できます。キャンセルすると以後の自動更新が止まりますが、現在の期間が終わるまでは引き続き利用できます。
月額で登録している場合は、「設定」→「サブスクリプション」→「年額プランに切り替え」で年額プランに切り替えられます。
返金
返金はAppleが対応します。申請先はreportaproblem.apple.comです。当社は支払い情報にアクセスできず、自ら返金を行うこともできません。ただし、うまくいかないことがあった場合は、当社にもぜひご連絡ください。当社がそれを知る方法はそれしかないからです。
購入内容の復元
新しいデバイスでは、「設定」→「サブスクリプション」→「登録」を開いて「購入内容を復元」をタップします。ファミリーメンバーが共有しているサブスクリプションも、これで復元されます。登録に使ったApple Account、または同じファミリーグループのApple Accountを使ってください。
データの扱い
要点
アカウントもサーバーもありません。アプリは、データを当社にもほかの会社にも送りません。パートナーゲームは、2台のデバイスが共有するWi‑Fiネットワーク上で、または2台が近くにあるときはデバイス同士で、相手のデバイスとだけデータをやり取りします。
保存場所
設定、予想セット(追加した画像も含みます)、状態のリストは、デバイス上の、アプリ専用の保存領域に保存されます。「統計をデバイスに保存」をオンにするまでは、統計はアプリの実行中、メモリ上にだけ保持されます。
ほかのアプリのデータと同じように、これらはすべてデバイスのバックアップに含まれます。
アプリには、アナリティクスもクラッシュレポートの機能もありません。
メールでのお問い合わせ
当社に送られたメールは、通常のやり取りとして扱います。保管するのは、お返事に必要な間だけです。
詳しいことはすべてプライバシーポリシーに書かれています。
AIで作る自分のセット
AIアシスタント(たとえばチャットボット)に、予想セット用の画像を描いてもらったり、セット全体を作ってもらったりできます。画像はSVGの絵です。SVG画像には、絵の中の文字を複数の言語で入れておくことができます。その場合、アプリはその文字を、アプリに設定されている言語で表示します。画像はまた、アプリのテーマの色を、テーマのライトとダークのどちらでも使えます。セットは、独自の「?」プレースホルダ(値が隠されている間に表示される画像)を持つことができます。アシスタントには形式の説明が必要です。下の依頼文には、どれにもその説明のアドレスが入っています。
セットを作る
- 下の依頼文のどれかをアシスタントにコピーし、題材・画像の数(2枚から200枚)・言語を、好きなように変えてください。
- アシスタントがウェブページを開けない場合は、形式の説明も渡してください。「AI向けの形式の説明」で「コピー」をタップして同じチャットに説明をペーストするか、「保存」をタップして保存したファイルを添付します。
- アシスタントは、セットを1つのコードブロックで返します。前後に短い説明が付くこともよくあります。コピーするのはコードブロックだけにしてください。多くのチャットアプリでは、コードブロックに専用のコピーボタンがあります。
- アプリで、メイン画面のをタップし、「セットを追加」画面で「クリップボードからペースト」をタップします。アシスタントを別のデバイス(たとえばMac)で使っている場合は、そこでコードブロックを名前が.jsonで終わるファイルとして保存し、代わりに「ファイルから読み込む」をタップします。新しいセットが追加されて選択されます。「予想を始める」をタップすると、メイン画面に移ります。同じボタンは、これらの手順のすぐ下にもあります。
エラーが出たら、アシスタントに直してもらってください。
キャプションのないセット:
Intuition Checkというアプリ用に、「動物」という名前の予想セットを作ってください。いろいろな動物のSVG画像を10枚、キャプションなしでお願いします。まず形式の説明を読んで、それに従ってください:https://intuition-check.com/llm-formats.txt各画像にキャプションが入ったセット。キャプションは、アプリの言語を変えても変わりません:
Intuition Checkというアプリ用に、「果物」という名前の予想セットを作ってください。いろいろな果物のSVG画像を8枚で、どの画像にも、絵の下にキャプションとして果物の名前を入れてください。まず形式の説明を読んで、それに従ってください:https://intuition-check.com/llm-formats.txt名前が複数の言語で付いたセット。各キャプションは、画像の名前をアプリの言語で表示します:
Intuition Checkというアプリ用に、「惑星」という名前の多言語の予想セットを作ってください。惑星のSVG画像を8枚で、どの画像にも、画像の名前をアプリの言語で表示するキャプションを入れてください。名前は日本語・ドイツ語・ヒンディー語で付けてください。まず形式の説明を読んで、それに従ってください:https://intuition-check.com/llm-formats.txt画像がアプリのテーマの色に従うセット:
Intuition Checkというアプリ用に、「天気」という名前の予想セットを作ってください。SVG画像は8枚で、太陽・雲・雨・雪・雷雨・風・霧・虹を、キャプションなしで描いてください。画像の色は、テーマのライトでもダークでも、アプリのテーマに従うようにしてください。まず形式の説明を読んで、それに従ってください:https://intuition-check.com/llm-formats.txt画像を1枚作る
アシスタントは、画像を1枚だけ作ることもできます。そのコードブロックをコピーし、自分の画像セットのどれかを開いてをタップし、「クリップボードからペースト」をタップします。画像は名前なしで追加されます。画像をタップして、「名前」に名前を入力してください。コードブロックを、名前が.svgで終わるファイルとして保存し、セットでをタップして「ファイル」を選ぶこともできます。その場合は、.svgを除いたファイル名が画像の名前になります。
Intuition Checkというアプリ用に、猫のSVG画像を1枚描いてください。まず形式の説明を読んで、それに従ってください:https://intuition-check.com/llm-formats.txtセットでほかにできること
形式で何ができるかを、それぞれについての依頼文の例と一緒に説明するよう、アシスタントに頼んでみてください:
Intuition Checkというアプリ用の形式の説明を読んでください:https://intuition-check.com/llm-formats.txt
セットと画像でできることを、手短に、やさしい言葉で教えてください。画像がアプリのテーマ(いろいろなテーマ、ライトとダーク)に従う方法、セットと画像の名前にほかの言語の訳を付ける方法、画像に入れられるキャプションの種類、セットの「?」プレースホルダ(その裏面)に何を表示できるかについてです。それぞれについて、私があなたに送れる依頼文の例を挙げてください。まだ何も描かないでください。AI向けの形式の説明
形式の説明は英語で書かれていて、人が読むためではなく、AIアシスタントのためのものです。同じ説明はウェブサイトの、上の依頼文にあるアドレスにもあります。
This is a specification for language models; it is not formatted for human reading.
Format version: 1
Stable URL: https://intuition-check.com/llm-formats.txt
# Intuition Check: how to make SVG pictures and guess sets
Intuition Check is an iOS app. The app picks one picture of a guess set, hidden, and the user guesses which one.
A guess set is a named, ordered list of pictures. This text tells you how to produce (A) a whole guess set as
one JSON object, or (B) one picture as one SVG document, so that the app accepts it and draws it well.
The user's wishes always win. Every rule, default and style advice in this text is what you do when the user
has not said otherwise: anything the user asks for — any texts, any number of them, any place, size, shape,
colour or layout, a caption over the drawing, a word along an arc — overrides it. Only facts about the app
cannot be overridden, because the app enforces them (what it accepts and refuses, what it removes, how it
draws: sections 2, 3, 5 and the theme rules of 6 — but a sentence there that tells you what to do is still a
default, not a fact about the app); if a wish runs into one of them, do the closest thing the app allows and
say so.
## When the user asks what the formats allow (to explain, not to make)
Answer in the user's language, in plain words, without code. Keep apart what the app does and what you do by
default. The sizes, positions and orders in this text, and its sentences that tell you what to do ("put",
"give", "write", "keep"), are your defaults for a good result: the app does not check them and the user may
ask otherwise. Do not retell them as rules of the app ("must", "required", "not allowed"); say "by default I …".
What the app itself does:
- Themes: four themes, each light and dark. The app never recolours a picture on its own; a picture follows
the theme only where its own file says so (section 6), which you write when asked.
- Names: a set needs a name; a picture's name is optional. The set and every picture may have translations,
each its own languages; the app shows the one for the app language, else the default name.
- Captions: text in a picture is part of the drawing; the app never writes or translates it. A caption is one
fixed text, or holds versions in any number of languages, two included, and the app language picks one.
- The "?" placeholder: a set without a cover shows the app's own "?". The app draws no cover itself. A cover
is a picture like any other: it may show anything, with or without text, follow the theme and the app
language, and stand anywhere in the set.
- Limits: at least 2 pictures to guess (a cover is not one of them), at most 200 in all, 10 MB per SVG; one
refused picture refuses the whole set.
Do not translate the themes' code words (section 6).
Terms used below:
- name: the picture's name as stored in the app (`name`, `nameTranslations`). It is data, not part of the drawing.
- caption: a text drawn inside the picture (an SVG `<text>`). Optional. See section 4.
- app language: the language the app's interface is set to, in the app itself; it may differ from the device's
language. One of the codes in section 3.
- user's language: the language the user writes to you in, unless the user names another.
## 1. Output contract
A. The user asks for a SET (several pictures, "guess set", "set"):
- Answer with ONE JSON object as defined in section 2, in ONE code block. Nothing else is needed.
- If you add words outside the code block, they must not contain `{` or `}`: the app reads the pasted text
from the first `{` to the last `}`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block (chat apps usually show a copy button on it) and paste it into Intuition Check as a new set — or,
on another device, to save it as a file whose name ends in .json and open that file in the app.
B. The user asks for a single PICTURE:
- Answer with ONE SVG document (section 5) in ONE code block.
- If you add words outside the code block, they must not contain `<svg` or `</svg>`: the app reads the
pasted text from the first `<svg` to the last `</svg>`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block and paste it into one of their picture sets in Intuition Check; the picture is added without a
name. Or to save it as a file whose name ends in .svg and add that file to a set: the file name without
".svg" becomes the picture's name, so suggest a file name that is the name, e.g. `Cat.svg`.
In both: do not name the app's buttons or screens from memory, and do not translate their names yourself. The
app's help exists in every language of the app, with the exact names the app shows in that language; the steps
are in its section "#ai_sets", and the page for each language is listed in https://intuition-check.com/llms.txt. If
you can open web pages and the user wants the steps, take the names from the page in the user's language.
Otherwise the one sentence above is enough: the app's help and its own screens show the user where to paste.
Ask first, or proceed:
- Proceed without questions. Decide what the request leaves open, and say what you decided in a sentence or
two beside the code block:
- which things of a kind ("five animals": choose the animals);
- how many pictures, if no number is given: 4;
- the regional form of the user's language: take the likeliest and name it (e.g. "Canadian French");
- translations: as well as you can; name the languages you are least sure of;
- themes not mentioned: fixed colours, and one sentence that a version following the app's themes can be
made;
- a cover with nothing said about what it shows: the question mark (8c).
- Ask only when you cannot start: you cannot tell which language the names should be in, or the request names
no subject at all. Then at most 2 questions, in ONE message, in the user's language, each with the choice
you will make if the user does not mind; no code block in that message. Never ask what the message already
says. Plain words: no "code block", "JSON", "opaque", "plate", "import", nothing about how the format works.
- If you cannot ask (there is no dialogue), or the user tells you not to: proceed.
- What you say beside the code block is in the user's words: "its own background", not "opaque plate";
language names, not codes; at most four short points. The file endings .json and .svg are allowed: the
user needs them.
- Like all words outside the code block: no `{` or `}` next to a set, no `<svg` next to a picture. Do not
quote code outside the code block.
Defaults when the request does not say otherwise:
- No caption text in the drawing (section 4, option 1).
- No theme colours (section 6). Fixed colours of your own.
- Names: always give every picture a `name`, in the user's language. Give no `nameTranslations` unless the
user asks for other languages or for captions in several languages (section 4, option 4).
- Number of pictures: what the user asked for; never fewer than 2 or more than 200.
- No cover (section 2). A cover the user asks for is extra: it is not one of the pictures asked for.
## 2. The set format (JSON)
```json
{
"intuitionCheckSet": 1,
"name": "Animals",
"nameTranslations": { "ru": "Животные", "de": "Tiere" },
"images": [
{ "name": "Cat", "nameTranslations": { "ru": "Кот", "de": "Katze" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><circle cx=\"50\" cy=\"56\" r=\"30\" fill=\"#f57c00\"/><path d=\"M24 44 L28 14 L48 30 Z M76 44 L72 14 L52 30 Z\" fill=\"#f57c00\"/></svg>" },
{ "name": "Fish", "nameTranslations": { "ru": "Рыба", "de": "Fisch" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><ellipse cx=\"44\" cy=\"50\" rx=\"30\" ry=\"18\" fill=\"#1976d2\"/><path d=\"M70 50 L92 32 L92 68 Z\" fill=\"#1976d2\"/></svg>" }
]
}
```
(The drawings above are kept tiny to show the shape of the file. More examples are in section 8.)
Keys:
- `intuitionCheckSet` (required): the integer 1.
- `name` (required): the set's default name. Not empty.
- `nameTranslations` (optional, on the set and on each image): object, language code → name. Codes: section 3.
- `images` (required): array of at most 200 objects, at least 2 of them pictures to guess (a cover is one
more, not one of the 2).
Array order = display order. Each object:
- `name` (optional in the format; always give it): the picture's default name.
- `nameTranslations` (optional): as above.
- `svg` (required): one complete SVG document as a JSON string (section 5).
- `cover` (optional): the JSON literal `true` on the picture that is the set's cover (below). Leave it out
on every other picture.
- Unknown keys are ignored. Do not add any.
The cover: while the app hides the value to guess, it shows a "?" in its place. A set — any set, with or
without captions — may bring its own picture for that place: the cover. Give one ONLY when the user asks for
it (a cover, a back, a placeholder, a question-mark picture). It shows what the user wants: for a set of
playing cards, for example, the pattern of a card's back. If the user does not say what it shows, draw the set's
own frame, with a question mark where the other pictures have their subject (8c; the last picture of 8f);
when the pictures' plates differ in colour, a plate of the same family (8f: a neutral grey). Exactly one
picture gets `"cover": true` (if several do, the first counts and the others are ordinary pictures). The
cover is never an answer, so the set still needs at least 2 other pictures. Put it last in `images` (your default; the app takes it at any place). Give it
a `name` in words ("Question mark", not "?") and, in a multilingual set, `nameTranslations` in the same
languages as the pictures: the app shows the cover's name in the set's list of pictures, in the app language.
By default the cover has no caption (no word under it); the app draws any text it has. Its question mark is the cover's subject; it only borrows the
`class="caption"` pattern of section 4, option 4, so that it changes with the app language. Write the mark
as text (preferred) in two forms: `?`, and `؟` for Arabic and Urdu (the form those languages write). The app
does not change the mark itself: the cover holds both, and its own style sheet shows the one for the app
language. That works in every set, also in one without captions; the two marks are then its only `<text>`. Drawn as a
shape instead, the mark is the same in every app language: Arabic and Urdu see the Latin form. A cover with
a subject of its own (a card back, a cloud) needs no `<text>` and no style sheet.
A single picture (answer B) has no cover key: the user marks a picture as the cover inside the app. A single
picture meant as a cover and asked with a caption: do both, and say that the word will show on the cover.
Rules:
- Strict JSON, UTF-8: no comments, no trailing commas. Non-ASCII characters may be written as they are.
- Inside the `svg` string escape `"` as `\"` and `\` as `\\`; write the SVG on one line, or write each line
break as `\n`. No raw line break or tab inside a JSON string. Where you join two lines, put one space,
never nothing. No other escape is needed: an apostrophe stays `'` (`\'` is not JSON), and letters of any
script stay as they are.
- Types: `intuitionCheckSet` is the number 1, every name and translation is a string, `cover` is `true`. A
wrong type (`"cover": "true"`, a number as a name, `null` as a translation) makes the app refuse the whole
text.
- If the app refuses any one picture, it imports nothing and names the refused pictures. Every picture must
be valid.
- A name is one line of plain text. The app trims it, turns line breaks and tabs into spaces, and cuts it at
256 characters. Keep names short (one to three words): they are shown small.
How names are shown:
- A set is multilingual when the set or any image has at least one translation.
- In a multilingual set the app shows, for the app language: the translation with exactly that code; else
the translation with the code's first part (`fr-CA` → `fr`, `en-GB` → `en`, `es-419` → `es`); else the
default `name`.
- In a set without translations the app shows the default `name` in every app language.
When the user asks for a multilingual set:
- Default `name` (set and images): in the user's language.
- `nameTranslations`: one entry per requested language, on the set AND on every image. Give the same
languages on every image (the app does not require it: an image without an entry shows its default name).
- The language of the default `name` gets no entry of its own: a language without an entry shows the default
name.
- A regional code (`en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA`) needs its own entry only when its word
differs from the `en` / `es` / `fr` entry. `pt-BR` and `pt-PT` have no common code: each requested one that
is not the language of the default `name` needs its own entry (asked for "Portuguese" with an English default
name: give both). The same for `zh-Hans` and `zh-Hant`.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`, `fr`,
`es`), in names as in captions: every form of that language then shows it.
- Languages not named ("a multilingual set"), or "all languages": every language of section 3 — 53 codes,
47 entries (see there). Translate as well as you can (section 1). Leave out only a language you cannot
write at all (it then shows the default name), and tell the user which.
- `nameTranslations` change only names, never a caption. A multilingual set has no captions unless the user asks for them; a
caption drawn inside the pictures needs its own words for each language in the SVG itself (section 4,
option 4).
## 3. Language codes
Write the codes exactly as here (case matters):
ar bg bn ca cs da de el en en-AU en-CA en-GB es es-419 fi fr fr-CA gu he hi hr hu id it ja kk kn ko lt ml mr ms
nb nl or pa pl pt-BR pt-PT ro ru sk sl sv ta te th tr uk ur vi zh-Hans zh-Hant
A code that is not in this list is not an error: the app drops it. An entry
with an empty value is dropped.
"All languages" is 53 codes but 47 entries besides the default, in names and in captions: the user's language
is the default and needs none, and `en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA` show the `en` / `es` / `fr`
word unless theirs differs. (With a Bengali default, `en` is one of the 47 and `bn` is not.)
## 4. Captions (text inside the drawing): four options
Names (section 2) are separate from captions: the app never writes a name into a picture and never changes any
text of a picture. Give names always. Text in, on or under the picture — whatever the user calls it (name,
word, label) — is a caption request; a wish about the words alone (correct, careful) is not. If you leave out
something that was asked for, say so. Lettering that is part of the subject (STOP on a road sign) is
drawing, not a caption: allowed under every option, written once, with `lang`.
Urdu is drawn in Nastaliq, its own style, which reaches lower under the line than other scripts (about
0.3 × font-size): leave room under an Urdu caption. A `؟` in Urdu is smaller in Nastaliq: give it its own text and size (8c).
A caption's `lang` may be a regional code (`en-GB`, `fr-CA`), also where its name stands under the parent code.
Choose the caption option from the request:
1. DEFAULT — no caption. The drawing has no `<text>` that spells the name. Also for a multilingual set
whose user did not ask for captions.
2. ONE-LANGUAGE caption — when the user asks for a caption / label / word in or under the picture and names
no languages for it. A plain `<text>` with the word in the user's language; every app language shows
that same word. Put `lang="CODE"` of the caption's language on the `<text>`: a picture
with text is drawn anew for each app language, and without `lang` the letter forms follow the app language. No
`letter-spacing` in Arabic, Hebrew, Thai or an Indic script. Example:
`<text lang="ru" x="50" y="91" font-size="12" font-family="sans-serif" text-anchor="middle" fill="#222222">Кот</text>`
3. TWO LANGUAGES AT ONCE — when the user names exactly two languages for the word under the picture and does
not say it should change with the app's language. The same for any other text of the picture: each gets its
two lines. Two `<text>` lines, each with its `lang`, both always
shown, no style sheet for them: the user's language on top, font-size 10, baselines at y = 84 and 95,
subject in the upper 68 units (100-unit viewBox). A line in a script of 8b's "Lettering" block takes that
`font-family` as an attribute; a long word follows "Size" below. Names: the user's language as `name`,
the other in `nameTranslations`. Say that both words always show, and that captions that change with the
app's language can be made instead.
4. CAPTIONS IN SEVERAL LANGUAGES — when the user names three or more languages for the captions, or asks for
captions in all of the app's languages, or for captions that follow the app's language (= all of them).
The picture holds one caption per language and a small style sheet; through that style sheet the app
language picks the caption (8b, 8f). Languages: exactly those the user named; "all" = every language of
section 3 (53 codes, 47 entries: see there), translated as well as you can (section 1). In a set, give
every image `nameTranslations` with the same languages and the same words, so that the name and the
caption agree.
How option 4 works:
- A picture that contains `<text` or `:lang(` is drawn anew for each app language it is shown in, each time
inside an HTML page whose language is that app language: `<html lang="CODE">`, CODE from section 3 (`ru`,
`pt-BR`, `zh-Hant`, …). The app changes nothing in the file; the file's own CSS picks the caption with the
selector `:lang()`.
- `:lang(x)` matches a page in `x` and in every `x-…`: `:lang(fr)` also matches `fr-CA`, `:lang(es)` also
`es-419`, `:lang(en)` also `en-GB`. `pt-BR` and `pt-PT`, `zh-Hans` and `zh-Hant` are written separately.
- The pattern:
- All language versions of one text in ONE group with `class="caption"`; each `<text>` in it is one
language version, all at the same place.
- Any number of texts, anywhere and in any form (labels on parts, a title, words along an arc with
`<textPath href="#id">`): give each text its own group with `class="caption"` holding its language
versions; the one style sheet serves them all.
- The default caption has the class `default`. It carries the word of the default `name`, in the user's
language. It is shown when the page has no language and in every language that has no caption of its
own. The user's language is one of those: its code stands in no rule and on no caption. (In 8b and 8f
the default word is English, so `en` appears nowhere. The Zodiac files call this class `en`.) The
default caption is also shown on pages of other languages: give it `lang="CODE"` of the user's language.
If that language has a line in the "Lettering" block of 8b, add `.default` to that line's selector
(`.default, .hi, .mr { font-family: … }`; `.default` alone when no caption has that class), and to the
`letter-spacing: 0` line if you use letter-spacing.
- Every other caption's `class` lists the codes of the languages that show it. Languages with the same
word may share one caption: `class="bg ru"`; that changes only the `class`, never the style sheet. These
captions need no `lang`: each shows only on a page of its own language.
- The style sheet, in this order:
`.caption text { display: none }` — hide every caption;
`.caption .default { display: inline }` — show the default one;
`:lang(ar, bg, …) .default { display: none }` — hide the default one in every language that has its own
caption (list them all);
`:lang(ar) .ar, :lang(bg) .bg, … { display: inline }` — show each language's own caption.
- A regional code whose word differs from its parent's (`es-419` next to `es`): its own caption, its code in
both rules like any other, and one more rule: `:lang(es-419) .caption .es { display: none }` (the extra
`.caption` makes it win wherever it stands in the sheet). If its word is the parent's, give it nothing.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`,
`fr`, `es`), so every form of that language shows it. "Portuguese" alone: one caption
`class="pt-BR pt-PT"` when the word is the same.
- Do not repeat the default word under the user's own code (no caption, no rule, no `nameTranslations`
entry for it).
- Check: the codes in the hiding rule = the codes in the showing rule = the codes on the captions, and
each code is on exactly one `<text>`; the user's own code is in none of the three. Otherwise a language
shows no caption, or two at once.
- To leave a language out: no `<text>` for it and its code in neither rule. It then shows the default
caption.
- In a set: the same style sheet, the same attributes on the caption group and the same languages in every
picture, character for character. Only the words differ, and the size of a long word. (A cover has its
own text and rules: 8c, 8f.)
- Size: the app does not measure or shrink text. Choose one `font-size` on the group at which the captions
fit the free width. A word too long for it: first its own smaller `font-size` attribute, down to 9 (on a
100-unit viewBox); if it still does not fit, a shorter everyday word (and the same word as its name).
Never under 9. To estimate a width (measured in WebKit on a Mac):
- ordinary case in bold `sans-serif` (8f): 0.45 to 0.6 × font-size per letter. Треугольник is 77 of 100
units wide at font-size 12, and 68 at 10.5;
- a Chinese character: about 1 × font-size;
- Indic scripts, Thai, Arabic, Hebrew in bold `sans-serif`: 0.3 to 0.55 × font-size per code point (13
words measured).
- Case: ordinary case, as in 8f; capitals with wide spacing only for the style of 8b. Capitals follow each
language's rules: Turkish i → İ; Greek capitals lose the accent (ΑΣΤΈΡΙ → ΑΣΤΕΡΙ); German ß → SS.
- Fonts: copy the "Lettering" block of 8b (in a set, only the lines of the scripts you use). It gives every
script outside Latin, Cyrillic and Greek its own font list (fonts present on Apple devices, at a weight
they really have), and sets `letter-spacing` to 0 for Arabic, Hebrew, Thai and the Indic scripts — in most
of them the letters join or stack, and spacing breaks that (a line needed only when the group has
letter-spacing). Japanese, Chinese and Korean each get their
own font so that a Han character takes its regional form; that is why `zh-Hans` and `zh-Hant` keep
separate captions even with the same word.
- Direction: the page is left-to-right in every app language. Keep `text-anchor="middle"` for every script.
An Arabic, Hebrew or Urdu caption mixed with digits or Latin letters has not been tested: avoid it.
- A caption drawn twice (e.g. a shadow under it): put the group once inside `<defs>` with an `id`, and draw it
with two `<use href="#id">` that carry the colours and the offset.
- Whole set: captions and names in all languages fit in one answer. Write every language that was asked for, in
every picture. Do not ask about it, and do not tell the user it may not fit. In a set, leave out comments
and indentation.
- Never: fewer languages than asked without saying which are missing; captions left out when they were asked
for; one set spread over several messages or delivered as single pictures; a set cut short. A set is
always ONE JSON object in ONE message.
Start from 8f (a small set with captions and a cover, 100-unit viewBox). Take from 8b (a picture with a
caption in every language) its "Lettering" block, and its gold medallion style only when the user asks for
it; 8c is that set's cover. All three are complete and tested in the app. 8b and 8c are built like the app's
own Zodiac set; one of its files, if you can open web pages (you do not need it):
https://intuition-check.com/sets/zodiac/zodiac-08-scorpio.svg
## 5. The SVG document: what the app does with it
Facts (from the app's code):
- Size limit: 10,000,000 bytes per SVG (UTF-8). A larger SVG is refused.
- The app recognises an SVG by the characters `<svg` within the first 4096 bytes. Begin the document with
`<svg`: no XML declaration, DOCTYPE or comment before it.
- The app draws the SVG into a still bitmap, at most 1600 pixels on the longer side, with WebKit, inside an
HTML page. A picture with text is drawn anew for each app language it is shown in, and one with theme
rules for each theme. The background is transparent: where the drawing paints nothing, the app's own
background shows, light or dark depending on the user's theme.
- Scaling: the root's `viewBox` is fitted into the bitmap, aspect ratio kept, centred. `width` and `height`
on the root are ignored. A picture without a `viewBox` is accepted, but drawn unscaled (cut off or tiny):
always write one.
- The aspect ratio is read from the first `viewBox="minx miny width height"` in the first 4096 bytes: double
quotes, four numbers separated by spaces or commas, positive finite width and height. If it cannot
be read, the bitmap is square. Ratios outside 1:20 … 20:1 are clamped.
- `preserveAspectRatio="none"` on the root is replaced with `xMidYMid meet`: a picture is never stretched.
- Scripts never run. Nothing is loaded from the network: only content inside the file is drawn.
- Rendering has a time limit (10 seconds to load, 10 seconds to draw). A picture that exceeds it is refused.
Removed before drawing (so never write them; the rest of the picture is still drawn):
- these elements with everything inside: `script`, `foreignObject`, `meta`, `link`, `base`, `iframe`, `frame`,
`frameset`, `object`, `embed`, `applet`, `portal`, `form`, `input`, `button`, `textarea`, `select`, `option`,
`audio`, `video`, `source`, `track`, `template`, `noscript`;
- every attribute whose name starts with `on` (`onload`, `onclick`, …);
- every `href` / `xlink:href` whose value does not start with `#` (a part of the same file) or `data:image/`;
- `@import` in a style sheet; `<?xml-stylesheet …?>`; a DOCTYPE with an internal subset (`[ … ]`).
The removal works on the text of the file: the character sequences `on…=`, `href=` and `@import` are also
removed from text content and CSS, so do not write them there.
Allowed and drawn: shapes, `path`, `g`, `text`, `tspan`, gradients (`linearGradient`, `radialGradient`),
`pattern`, `mask`, `clipPath`, `filter`, `defs`, `symbol`, `use` with `href="#id"`, `<style>` with inline CSS,
`title`, `desc`, `image` with `href="data:image/…"` (a picture embedded in the file).
Not removed, but useless: `a` (a link does nothing in a picture in the app).
Rules for the SVG you write:
1. Root: `<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">` … `</svg>`. Double-quoted
attributes. Lower-case `<svg`. One root; no nested `<svg>` elements.
2. Square `viewBox` (`0 0 100 100`) unless the user asks for another shape. The same `viewBox` for every
picture of a set.
3. Self-contained: no external images, fonts, style sheets or links. For text use
`font-family="sans-serif"` (or `serif`, `monospace`), or the font lists of 8b, which end with one of them:
the text is drawn with the device's own fonts.
4. Well-formed XML: every element closed, attribute values quoted, `&` `<` `>` in text and attribute values
written as `&` `<` `>`. Only SVG elements; no HTML elements.
5. Readable small: the app shows pictures in a grid, each cell may be small. One clear subject that fills
most of the viewBox; a few large shapes; strong contrast; no fine detail. On a 100-unit viewBox: the
subject's lines at least 2 wide, a caption's font-size at least 10, a long word 9. Ornament may be
thinner (the rings of 8b); in a small cell it may not be seen. The examples in this text are bare on
purpose; do not copy their simplicity. Build the subject from about 4 to 10 shapes: its outline, its
parts, and one or two details that make it this thing and no other. Someone who sees only the picture
must be able to name it.
Pale or pastel colours: keep the silhouette. The subject's main shape, or an outline around it, must differ
from the plate by at least 3:1 — a darker outline, or a deeper plate. That is for the silhouette only:
details inside the subject are free.
6. Distinct: the game needs the pictures told apart at a glance. Every picture of a set must differ clearly
from every other in silhouette or in main colour — not only in a detail. No two pictures with the same
SVG text.
7. One style across a set: the same viewBox, margins, line weights, palette family, and the same kind of
background (all with a plate, or all without). With captions: the same lettering and caption place in
every picture.
8. Background: the bitmap is transparent and the app's background can be light or dark. Either draw an
opaque plate of your own behind the subject (e.g. `<rect width="100" height="100" rx="12" fill="…"/>`), or
use only colours that stay visible on both white and near-black, or use theme colours (section 6).
9. Unique `id` values inside one SVG. Ids of different pictures do not clash (each picture is drawn alone).
Do not start an id with `ic-` unless it is a theme rule, and do not name a class of your own `ic-…` or a
variable `--ic-…` (section 6).
10. Keep it light: no heavy filters (large blurs), no deep `use` nesting, no animation (the app does not remove it, but
draws the picture as a still image).
11. A caption must not cross the drawing, unless the user allowed it (labels on the drawing's parts, a word on
a sign or over the subject are such wishes). Any text stays inside its own shape when it has one (a sign,
a label, a slice), and inside the picture. Keep the subject and the caption
apart — e.g. on a 100-unit viewBox: the subject above y = 78 and one caption line with its baseline at
y = 91; with two lines (section 4, option 3), the subject above y = 68.
## 6. Theme colours
Use this section ONLY when the user asks for pictures that follow the app's theme, or for light and dark
versions. Otherwise use fixed colours, no id that starts with `ic-`, no class `ic-…` and no variable
`--ic-…`. When the user said nothing about
themes: fixed colours, and offer a version that follows the themes (section 1). "Looks good in light and dark
mode" is not a theme request: an opaque plate with fixed colours does it (section 5, rule 8). A theme request
wins over a colour description in the same message ("gold on dark, matching the app's themes": theme rules).
The app has four themes — `sand`, `ocean`, `forest`, `dusk` — each in a `light` and a `dark` version. These words
(and `light`, `dark`) are code words for the rules below, not what the user sees: the app shows the four themes
under its own names in the user's language. When you talk to the user, do not translate the code words
yourself; say "the app's four themes" (and "light" / "dark" in the user's language), or, if you can open the
app's help page in the user's language (see section 1), take the themes' names from it.
Every version has its own values for five colours:
- `background` — the colour behind every view;
- `surface` — plates and panels on a view;
- `text` — the app's text colour;
- `accent` — the colour of buttons that are not filled;
- `soft` — in a light version the same as `accent` (a `soft` part on an `accent` part cannot be seen there);
in a dark version a pale tone close to the text colour.
The values (#rrggbb), in the order background, surface, text, accent, soft:
- sand light: f6f2ea eae3d5 403a35 645339 645339
- sand dark: 1b1a18 282622 c7c4bd b89b70 d2cbbe
- ocean light: eef4f7 dde8ee 363d40 3e5a6a 3e5a6a
- ocean dark: 0d1a23 16272f bec4c7 82a3b6 c6d4db
- forest light: f1f4ec e1e8d7 353e34 4a5e46 4a5e46
- forest dark: 111a14 1b261e bec4bd 8ba586 c9d4c6
- dusk light: f6f1f6 eae0ec 3f3944 5e4a6a 5e4a6a
- dusk dark: 17121c 231b2a c2bdc5 a894b4 d3c9d9
All four themes are muted: no colour above is bright. `text`, `accent` and `soft` on `background` or `surface`
have a contrast of at least 5.6:1 in every version.
Fixed colours and theme colours mix freely: give rules only to the parts that should follow the theme (a plate,
outlines, the main shape) and keep your own fixed colours where the picture needs them (the arcs of a rainbow,
a red apple). A part without a rule is drawn as written in every theme.
A part that keeps a fixed colour sits on a plate that changes: check it against the light and the dark
background and surface values of the table. Near-black vanishes on the dark ones (#1b1b1b: 1.01:1), white and
yellow on the light ones (#ffffff: 1.11:1, #f9a825: 1.54:1). Give such parts the theme's text colour — in a
style sheet `fill: var(--ic-text, #333333)` (or `stroke:`), with ids `ic-text` or `ic-stroke-text` — or
use a mid-tone (#e53935: 3.30:1 on the light ones, 3.57:1 on the dark ones).
Captions on a themed plate take the theme's text colour. In a style sheet: one more line,
`.caption { fill: var(--ic-text, #222222) }`, in the sheet that already picks the caption; a single `<text>`
gets a class and the same line; a caption drawn twice through `<use>` gets the class on the `<use>` that
carries its colour (8b). With ids: give the caption group `id="ic-text"` and a written `fill`; the group may
also carry `class="caption"`; a single `<text>` may carry the id itself. A themed cover's mark is coloured
the same way.
There are two ways to write theme colours, and the app reads both. Use a style sheet (6.1), also when the
user will edit the file in Inkscape (6.4). Use ids (6.2) instead when the user says the file will be edited
in Figma, Illustrator, Affinity or Sketch, or asks for ids: those editors write the file anew and drop its
`<style>` element, while ids can come through as layer names (Figma only with its option to include ids).
One way per picture, and in a set the same way in every picture: the app accepts both in one file, but a
rule in a group's id overrides the sheet colours of the classed shapes inside that group.
### 6.1 A style sheet
The app adds to the root `<svg>` the classes `ic-sand` | `ic-ocean` | `ic-forest` | `ic-dusk` and `ic-light` |
`ic-dark`, and defines the CSS variables `--ic-background`, `--ic-surface`, `--ic-text`, `--ic-accent`,
`--ic-soft` — but only if the file contains, in its `<style>` element, one of those six class names after a
dot (e.g. `.ic-dark`), or, in `<style>` or in a `style` attribute, a variable name that starts with `--ic-`.
```
.plate { fill: var(--ic-surface, #dddddd) }
.leaf { fill: var(--ic-accent, #e53935) }
.ic-dark .dot { fill: #ffd54f }
.ic-forest.ic-dark .dot { fill: #69f0ae }
```
The second value inside `var()` is the colour other viewers show. Give the styled elements a `class` and no
`fill` in a `style` attribute. The second value is needed: always write it.
- The five variable names are the only ones. Another name (`--ic-bg`) is never defined: its second value is
drawn in every theme.
- Write `var(--ic-…)` inside the `<style>` element, not in a `fill="…"` or `stroke="…"` attribute: the app
does not look there, and with no other mention it defines no variables.
- The app writes the six classes on the root. Never write one of them on an element yourself.
- A sheet rule beats a colour written in a `fill` / `stroke` attribute; a colour in a `style` attribute beats
the sheet.
- Of two sheet rules of equal weight the later one wins: plain rules first, then `.ic-light` / `.ic-dark`
rules, then theme rules.
- Put these lines into the same `<style>` as the caption rules of section 4, when the picture has them.
### 6.2 Rules in an id
A rule = optional limits + a colour.
- Limits, at most one of each kind, any order: a theme (`sand` | `ocean` | `forest` | `dusk`); a version
(`light` | `dark`); a paint (`fill` | `stroke`). No limits = every theme, both versions, fill and stroke.
- Colour: one of the five names above, or your own colour as exactly six hex digits (`1e88e5`). Colour words
(`red`) are not colours in a rule. All rule words are English.
`id="ic-` + one or more rules, all words joined by hyphens, own colours without `#`:
- `ic-text` — the text colour everywhere;
- `ic-light-accent-dark-soft` — accent in light versions, soft in dark versions;
- `ic-dark-1e3a2a` — own colour in dark versions; as drawn in light versions;
- `ic-ocean-dark-c3ced4` — own colour in the dark version of Ocean only;
- `ic-stroke-accent` — accent on the outline only.
- `ic-fill-accent-stroke-text` — two rules in one id: accent inside, text colour on the outline.
Reading stops at the first character that is not an ASCII letter, digit or hyphen, and at the first word that
is not a rule word. So keep ids unique with a numeric suffix: `ic-text-2`, `ic-text-3`. A word of your own
ends the rules: `ic-moon-text` holds no rule. A six-letter word of hex digits (`facade`) is read as a colour.
What a rule does:
- The id may be on a shape, a `text`, or a group `g`. A rule on a group covers everything inside it, except
what is inside `defs`, a gradient, `mask`, `pattern`, `clipPath`, `marker`, `symbol` or `filter`.
- For each element, fill and stroke are chosen separately. Its own rule is used when one applies in the
current theme and version; otherwise the rule of the innermost enclosing group that has one that applies;
otherwise the colour stays as drawn.
- Among several rules of one element that apply: theme + version beats theme, theme beats version, version
beats no limit; then a rule with `fill` / `stroke` beats one without; then the first one written.
- The chosen colour replaces a plain colour written in the element's `fill` / `stroke` attribute or in its
`style` attribute. Left as written: `none`, `transparent`, `currentColor`, `inherit`, `url(…)` (gradients),
`var(…)`, and colours with their own alpha (`#rrggbbaa`, `#rgba`, `rgba(…)`, `hsla(…)`).
- A `path`, `rect`, `circle`, `ellipse`, `polygon`, `polyline`, `text` or `use` with no `fill` written gets
the chosen fill added. A `line` does not. A stroke is never added: a rule colours a stroke only where a
`stroke` with a plain colour is written on that element itself (not only on its group).
- So, to be safe: write `fill="#rrggbb"` (and `stroke="#rrggbb"` where there is an outline) on every element
that a rule should colour. These written colours are also what other SVG viewers show.
- A `stop-color` or `color` written on a covered element is replaced too (by the fill colour, else by the
stroke colour). A gradient with a rule in its own id has its stops recoloured.
- Theme rules are not applied to an SVG with more than 50,000 tags; it is drawn as written.
- Do not colour the same element both ways. When an element with a `class` has a rule — its own or its
group's — the app writes the rule's colour into the element's `style` attribute, which beats the sheet
(unless the sheet says `!important`): a group's rule so overrides the sheet colours of the classed shapes
inside it. On an element without a `class` the sheet wins wherever one of its selectors reaches it.
### 6.3 Other ways the app reads (do not use unless asked)
- A `<desc>` directly inside an element, beginning with `Intuition Check`, then one rule per line as
`limits: colour` (e.g. `dark stroke: text`, `light: #1e88e5`); a first-line form `Intuition Check: text`.
- Inkscape swatches (a one-colour gradient whose label or id holds rules).
### 6.4 If the user wants to edit the file in Inkscape later
Inkscape keeps both ways, in Inkscape SVG and in Plain SVG.
- A style sheet (6.1): Inkscape keeps the `<style>` element with the `var()` inside it. Write `var()` only
there, never in a `style` attribute (Inkscape removes such an attribute when the element is edited), and add
`!important` to every colour in the sheet (Inkscape writes colours into the element's `style` attribute,
which otherwise wins).
- Ids (6.2): Inkscape keeps ids. Labels are lost in Plain SVG.
## 7. Checklist — run before answering
For a set:
1. The answer is one code block holding one JSON object; it parses as strict JSON.
2. `"intuitionCheckSet": 1` is present; `name` is not empty.
3. `images` has 2 to 200 entries: exactly the number of pictures the user asked for, plus the cover if
there is one.
4. Every image has a non-empty `name` and an `svg` string.
5. In every `svg` string each `"` is written `\"`, and there is no raw line break.
6. Language codes are from section 3, spelled exactly. In a multilingual set every image and the set have
the same languages.
7. Captions follow section 4: none by default; one language only if asked, with `lang` on the `<text>`
two named languages: two lines, both shown, each with `lang`; three or more, or all, only if the user
named them or asked for all. Then: the default caption has `lang`; the codes in the hiding rule = the
codes in the showing rule = the codes on the captions, each on exactly one `<text>`; the same style sheet
in every picture but the cover; every image has `nameTranslations` with the same languages and words.
8. A cover only if asked: one picture with `"cover": true`, last, plus at least 2 other pictures.
9. The answer is whole: the JSON ends with its `}`, and no picture was shortened or left for later.
10. Beside the code block: the sentence on how to use it, and what you assumed (section 1).
For every SVG (in a set or alone):
11. Starts with `<svg`, has `xmlns="http://www.w3.org/2000/svg"` and `viewBox="0 0 W H"` in double quotes,
ends with `</svg>`.
12. Well-formed: all elements closed, `&` `<` `>` escaped in text.
13. None of: `script`, `foreignObject`, `a`, `style` with `@import`, `on…` attributes, `href` to anything
but `#id` or `data:image/…`, external fonts, HTML elements, nested `svg`, animation.
14. Far under 10,000,000 bytes.
15. The subject is large, simple, high-contrast; the picture differs clearly from every other picture of the
set; it is visible on a light and on a dark background; no caption crosses the drawing.
16. Theme rules only if asked; without them no id starts with `ic-` and the style sheet has no `.ic-` class
and no `--ic-` variable. With them: one method in the picture, the same in every picture of the set.
Style sheet: `<style>` itself holds a `--ic-` variable or one of the six classes (a `var()` only in a
`fill` attribute does nothing); the variable names are the five of section 6; every `var()` has a second
value. Ids: every word after `ic-` is a rule word; the element has its `fill` (and `stroke`) written.
Every fixed colour left on a themed plate was checked against the light and the dark values.
17. Ids are unique within the SVG.
## 8. Complete examples
### 8a. Minimal set, no captions
```json
{
"intuitionCheckSet": 1,
"name": "Shapes",
"images": [
{ "name": "Circle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"50\" r=\"30\" fill=\"#e53935\"/></svg>" },
{ "name": "Triangle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 18 L84 78 L16 78 Z\" fill=\"#1565c0\"/></svg>" }
]
}
```
### 8b. One picture with a caption in every language (section 4, option 4)
A star in a gold medallion with its caption in all 53 languages, built like the app's Zodiac set: the
"Theme" block turns the gold to bronze in light versions (section 6.1), the "Language" block picks the
caption, the "Lettering" block gives each script its font. Languages with the same word share a caption;
es-419 and fr-CA follow es and fr; a page with no language, or one not listed, shows the default caption,
"STAR" (the user's language is English here). The "Theme" block is not part of option 4: this medallion has
no plate, and its gold has to darken on a light background. Without a request for theme colours leave that
block out and draw an opaque plate (section 5, rule 8), as 8f does.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme. The app gives the root the classes ic-light or ic-dark (and ic-<theme>).
The gold is drawn for a dark background; on a light one it turns bronze. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
.ic-light .shadow-glyph { stroke-opacity: 0.27 }
/* Language. Every caption is in the file once; its class names the languages that
show it. The page's language (html lang) picks the caption; without a language,
or with one not listed here, the default one. fr-CA follows fr, es-419 follows es. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, bg, bn, ca, cs, da, de, el, es, fi, fr, gu, he, hi, hr, hu, id, it, ja, kk,
kn, ko, lt, ml, mr, ms, nb, nl, or, pa, pl, pt-BR, pt-PT, ro, ru, sk, sl, sv, ta,
te, th, tr, uk, ur, vi, zh-Hans, zh-Hant) .default { display: none }
:lang(ar) .ar, :lang(bg) .bg, :lang(bn) .bn, :lang(ca) .ca, :lang(cs) .cs, :lang(da) .da,
:lang(de) .de, :lang(el) .el, :lang(es) .es, :lang(fi) .fi, :lang(fr) .fr, :lang(gu) .gu,
:lang(he) .he, :lang(hi) .hi, :lang(hr) .hr, :lang(hu) .hu, :lang(id) .id, :lang(it) .it,
:lang(ja) .ja, :lang(kk) .kk, :lang(kn) .kn, :lang(ko) .ko, :lang(lt) .lt, :lang(ml) .ml,
:lang(mr) .mr, :lang(ms) .ms, :lang(nb) .nb, :lang(nl) .nl, :lang(or) .or, :lang(pa) .pa,
:lang(pl) .pl, :lang(pt-BR) .pt-BR, :lang(pt-PT) .pt-PT, :lang(ro) .ro, :lang(ru) .ru,
:lang(sk) .sk, :lang(sl) .sl, :lang(sv) .sv, :lang(ta) .ta, :lang(te) .te, :lang(th) .th,
:lang(tr) .tr, :lang(uk) .uk, :lang(ur) .ur, :lang(vi) .vi, :lang(zh-Hans) .zh-Hans,
:lang(zh-Hant) .zh-Hant
{ display: inline }
/* Lettering. A script whose letters join or stack gets no letter-spacing; every script
outside Latin, Cyrillic and Greek gets its own font. Telugu at 500: iOS has Kohinoor
Telugu only up to Medium, and WebKit would fake a 600 from it. */
.ar, .ur, .he, .bn, .gu, .hi, .mr, .kn, .ml, .or, .pa, .ta, .te, .th { letter-spacing: 0 }
.ar, .ur { font-family: system-ui, -apple-system, Geeza Pro, sans-serif }
.he { font-family: system-ui, -apple-system, Arial Hebrew, sans-serif }
.bn { font-family: Kohinoor Bangla, Bangla Sangam MN, sans-serif }
.gu { font-family: Kohinoor Gujarati, Gujarati Sangam MN, sans-serif }
.hi, .mr { font-family: Kohinoor Devanagari, Devanagari Sangam MN, sans-serif }
.kn { font-family: Noto Sans Kannada, Kannada Sangam MN, sans-serif }
.ml { font-family: Malayalam Sangam MN, Malayalam MN, sans-serif }
.or { font-family: Noto Sans Oriya, Oriya Sangam MN, sans-serif }
.pa { font-family: Mukta Mahee, Gurmukhi Sangam MN, sans-serif }
.ta { font-family: Tamil Sangam MN, InaiMathi, Tamil MN, sans-serif }
.te { font-family: Kohinoor Telugu, Telugu Sangam MN, sans-serif }
.th { font-family: Thonburi, Noto Sans Thai, sans-serif }
.ja { font-family: Hiragino Sans, Hiragino Kaku Gothic ProN, sans-serif }
.ko { font-family: Apple SD Gothic Neo, Noto Sans KR, sans-serif }
.zh-Hans { font-family: PingFang SC, Heiti SC, sans-serif }
.zh-Hant { font-family: PingFang TC, Heiti TC, sans-serif }
.te { font-weight: 500 }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The captions. Drawn twice at the end of the file: the shadow, then the gold. A long
word would carry its own smaller font-size and letter-spacing. Urdu says lang="ur" and is
drawn in Nastaliq. zh-Hans and zh-Hant keep two captions
with the same word: each takes its own font. -->
<g id="caption" class="caption" text-anchor="middle" font-family="Helvetica Neue, Helvetica, -apple-system, sans-serif" font-weight="600" font-size="52" letter-spacing="6.8">
<text class="default" x="259.4" y="466">STAR</text>
<text class="ar" x="259.4" y="466">نجمة</text>
<text class="bg ru" x="259.4" y="466">ЗВЕЗДА</text>
<text class="bn" x="259.4" y="466">তারা</text>
<text class="ca es" x="259.4" y="466">ESTRELLA</text>
<text class="cs" x="259.4" y="466">HVĚZDA</text>
<text class="da nb" x="259.4" y="466">STJERNE</text>
<text class="de" x="259.4" y="466">STERN</text>
<text class="el" x="259.4" y="466">ΑΣΤΕΡΙ</text>
<text class="fi" x="259.4" y="466">TÄHTI</text>
<text class="fr" x="259.4" y="466">ÉTOILE</text>
<text class="gu" x="259.4" y="466">તારો</text>
<text class="he" x="259.4" y="466">כוכב</text>
<text class="hi mr" x="259.4" y="466">तारा</text>
<text class="hr" x="259.4" y="466">ZVIJEZDA</text>
<text class="hu" x="259.4" y="466">CSILLAG</text>
<text class="id ms" x="259.4" y="466">BINTANG</text>
<text class="it" x="259.4" y="466">STELLA</text>
<text class="ja" x="259.4" y="466">星</text>
<text class="kk" x="259.4" y="466">ЖҰЛДЫЗ</text>
<text class="kn" x="259.4" y="466">ನಕ್ಷತ್ರ</text>
<text class="ko" x="259.4" y="466">별</text>
<text class="lt" x="259.4" y="466">ŽVAIGŽDĖ</text>
<text class="ml" x="259.4" y="466">നക്ഷത്രം</text>
<text class="nl" x="259.4" y="466">STER</text>
<text class="or" x="259.4" y="466">ତାରା</text>
<text class="pa" x="259.4" y="466">ਤਾਰਾ</text>
<text class="pl" x="259.4" y="466">GWIAZDA</text>
<text class="pt-BR pt-PT" x="259.4" y="466">ESTRELA</text>
<text class="ro" x="259.4" y="466">STEA</text>
<text class="sk" x="259.4" y="466">HVIEZDA</text>
<text class="sl" x="259.4" y="466">ZVEZDA</text>
<text class="sv" x="259.4" y="466">STJÄRNA</text>
<text class="ta" x="259.4" y="466">நட்சத்திரம்</text>
<text class="te" x="259.4" y="466">నక్షత్రం</text>
<text class="th" x="259.4" y="466">ดาว</text>
<text class="tr" x="259.4" y="466">YILDIZ</text>
<text class="uk" x="259.4" y="466">ЗІРКА</text>
<text class="ur" lang="ur" x="259.4" y="466">ستارہ</text>
<text class="vi" x="259.4" y="466">NGÔI SAO</text>
<text class="zh-Hans" x="259.4" y="466">星星</text>
<text class="zh-Hant" x="259.4" y="466">星星</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<path class="shadow-glyph" d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#0E0D22" stroke-width="19" stroke-linejoin="round" opacity="0.45" transform="translate(3,5)"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="url(#gold)" stroke-width="19" stroke-linejoin="round"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#FFF6DA" stroke-width="4.5" stroke-linejoin="round" opacity="0.4" transform="translate(-2,-3)"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
<use href="#caption" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(2,4)"/>
<use href="#caption" class="gold-text" fill="#CA9E41"/>
</svg>
```
In a set this SVG is the image's `svg` string (on one line, `"` written `\"`). The image's `name` and
`nameTranslations` carry the same words as the captions, in ordinary case ("Star", "Звезда", "Étoile", …).
Every picture of the set lists the same languages.
### 8c. The cover of the set in 8b
The same medallion with a question mark instead of the subject (section 2, "The cover"); in a set it gets
`"cover": true`. Two marks: `?`, and `؟` for Arabic and Urdu. A cover may show anything else the user asks
for; this one is what to draw when the user does not say.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme: the same rules as every picture of the set. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
/* Language. Two marks: "?" for every language, the Arabic question mark for Arabic and Urdu. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, ur) .default { display: none }
:lang(ar) .ar, :lang(ur) .ur
{ display: inline }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The question mark, where the other pictures have their subject. Drawn twice below: the
shadow, then the gold. The marks differ in shape (Arabic ؟ in Naskh, Urdu ؟ in Nastaliq), so
each has its own size and place: the same ink box as "?". -->
<g id="mark" class="caption" text-anchor="middle" font-family="system-ui, -apple-system, sans-serif" font-weight="bold">
<text class="default" x="258" y="323.8" font-size="323">?</text>
<text class="ar" lang="ar" x="254.2" y="329.6" font-size="294.1">؟</text>
<text class="ur" lang="ur" x="258.4" y="325.6" font-size="317.3">؟</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<use href="#mark" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(3,5)"/>
<use href="#mark" class="gold-text" fill="#E2C378"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
</svg>
```
### 8d. One SVG picture with theme colours (style sheet)
The plate takes the theme's surface colour, the moon the accent colour, soft in dark versions; the second
values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<style>
.plate { fill: var(--ic-surface, #dddddd) }
.moon { fill: var(--ic-accent, #e53935) }
.ic-dark .moon { fill: var(--ic-soft, #e53935) }
.cut { fill: var(--ic-surface, #dddddd) }
</style>
<rect class="plate" width="100" height="100" rx="12"/>
<circle class="moon" cx="46" cy="48" r="28"/>
<circle class="cut" cx="59" cy="39" r="23"/>
</svg>
```
### 8e. One SVG picture with theme colours (ids)
The plate takes the theme's surface colour, the house the text colour, the door the accent colour; the sun is
accent in light versions and soft in dark versions. The written `fill` values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<rect id="ic-surface" width="100" height="100" rx="12" fill="#eeeeee"/>
<g id="ic-text">
<path d="M16 52 L50 22 L84 52 Z" fill="#333333"/>
<rect x="26" y="52" width="48" height="30" fill="#333333"/>
</g>
<rect id="ic-accent" x="44" y="60" width="12" height="22" fill="#e53935"/>
<circle id="ic-light-accent-dark-soft" cx="82" cy="18" r="8" fill="#f9a825"/>
</svg>
```
### 8f. A small set with captions in three languages, and a cover
The user writes in English and asks for captions in English, German and Russian, and for a cover. The
default caption is the English word, so `en` is in no rule. Ordinary case, `sans-serif`, no letter-spacing;
the long Russian word has its own smaller size. Both pictures to guess have the same style sheet. The
cover's mark follows the app language, whatever the languages of the captions: `؟` in Arabic and Urdu, `?`
in every other. No theme rules: every picture has an opaque plate.
```json
{
"intuitionCheckSet": 1,
"name": "Simple shapes",
"nameTranslations": {"de": "Einfache Formen", "ru": "Простые фигуры"},
"images": [
{ "name": "Circle", "nameTranslations": {"de": "Kreis", "ru": "Круг"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"42\" r=\"28\" fill=\"#e53935\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Circle</text><text class=\"de\" x=\"50\" y=\"91\">Kreis</text><text class=\"ru\" x=\"50\" y=\"91\">Круг</text></g></svg>" },
{ "name": "Triangle", "nameTranslations": {"de": "Dreieck", "ru": "Треугольник"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 12 L82 70 L18 70 Z\" fill=\"#1565c0\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Triangle</text><text class=\"de\" x=\"50\" y=\"91\">Dreieck</text><text class=\"ru\" x=\"50\" y=\"91\" font-size=\"10.5\">Треугольник</text></g></svg>" },
{ "name": "Question mark", "nameTranslations": {"de": "Fragezeichen", "ru": "Знак вопроса"}, "cover": true, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(ar,ur) .default{display:none}:lang(ar) .ar,:lang(ur) .ur{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#eeeeee\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"system-ui, -apple-system, sans-serif\" font-weight=\"bold\" fill=\"#555555\"><text class=\"default\" x=\"50.4\" y=\"72.4\" font-size=\"64\">?</text><text class=\"ar\" lang=\"ar\" x=\"49.6\" y=\"73.7\" font-size=\"58\">؟</text><text class=\"ur\" lang=\"ur\" x=\"50.5\" y=\"72.8\" font-size=\"62.9\">؟</text></g></svg>" }
]
}
```
目次
Intuition Checkでできる主なことについての短いガイドと、お問い合わせの方法です。
うまく動かないときは
[email protected]までメールをお送りください。お返事いたします。いちばん早いのは「設定」→「このアプリについて」→「サポートに問い合わせる」を使う方法です。メールアプリで下書きが開き、アプリのバージョンとビルド、デバイスの機種、iOSのバージョンがあらかじめ入力されています。
サポート用のフォームもチケットシステムもありません。アプリは何も収集しないので、当社が知る必要のあることは、すべて伝えていただくしかありません。
メッセージに書く内容
- 何をして、何を期待し、実際には何が起きたか。
- アプリのバージョン。「設定」→「このアプリについて」→「バージョン」で確認できます。
- デバイスの機種とiOSのバージョン。
「サポートに問い合わせる」で作られる下書きには、バージョン、機種、iOSのバージョンが最初から入っています。
トラブルシューティング
- 2台のデバイスが互いを見つけられない:デバイス同士が見つからないとき。
- アプリをもう一度開いたら統計が消えていた:統計を残すには。
- 統計に何も表示されない:記録される内容。
- スイッチャーにセットが見当たらない:セットのスイッチャー。
出典
- Kahneman, D., & Klein, G. (2009). American Psychologist, 64(6), 515–526. Conditions for intuitive expertise: A failure to disagree [直感的専門性の条件:起こらなかった意見の対立]
対立する学派に属する、直感研究の第一人者2人による共同レビュー。アメリカ心理学会の機関誌に掲載。
https://doi.org/10.1037/a0016755 - Cardeña, E. (2018). American Psychologist, 73(5), 663–677. The experimental evidence for parapsychological phenomena: A review [超心理学的現象の実験的証拠:レビュー]
その証拠を強いと考える心理学者が、多くの研究をまとめたレビュー。アメリカ心理学会の機関誌に掲載。
https://doi.org/10.1037/amp0000236 - Reber, A. S., & Alcock, J. E. (2020). American Psychologist, 75(3), 391–399. Searching for the impossible: Parapsychology's elusive quest [不可能なものを探して:超心理学のつかみどころのない探求]
上のレビューへの応答。こうした現象を否定する2人の心理学者による。同じ機関誌に掲載。
https://doi.org/10.1037/amp0000486 - Sheldrake, R. (2000). Journal of the Society for Psychical Research, 64, 224–232. Telepathic telephone calls: Two surveys [テレパシーによる電話:2つの調査]
イングランドのロンドンとベリーで、ランダムに選ばれた世帯を対象に行われた電話調査。テレパシーは存在すると考える研究者による。超心理学の学術誌に掲載。
https://www.sheldrake.org/files/pdfs/papers/Telepathic-Telephone-Calls-Two-Surveys.pdf - Brown, D. J., & Sheldrake, R. (2001). Journal of Parapsychology, 65, 145–156. The anticipation of telephone calls: A survey in California [電話の予感:カリフォルニアでの調査]
ランダムに選ばれた200人を対象にした電話調査。同じ研究者と共著者による。超心理学の学術誌に掲載。
https://www.sheldrake.org/files/pdfs/papers/The-Anticipation-of-Telephone-Calls-A-Survey-in-California.pdf - Cottrell, J. E., Winer, G. A., & Smith, M. C. (1996). Developmental Psychology, 32(1), 50–61. Beliefs of children and adults about feeling stares of unseen others [見えない他者の視線を感じることについての、子どもと大人の信念]
子どもと大人を対象にした3つの研究。アメリカ心理学会が発行する学術誌に掲載。
https://doi.org/10.1037/0012-1649.32.1.50 - Born, J., Hansen, K., Marshall, L., Mölle, M., & Fehm, H. L. (1999). Nature, 397, 29–30. Timing the end of nocturnal sleep [夜間睡眠の終わりのタイミングを計る]
15人のボランティアが参加した実験。学術誌Natureに掲載。
https://doi.org/10.1038/16166 - Sio, U. N., & Ormerod, T. C. (2009). Psychological Bulletin, 135(1), 94–120. Does incubation enhance problem solving? A meta-analytic review [インキュベーションは問題解決を促進するか:メタ分析によるレビュー]
多くの実験の結果をまとめたレビュー。アメリカ心理学会が発行する学術誌に掲載。
https://doi.org/10.1037/a0014212 - Wagner, U., Gais, S., Haider, H., Verleger, R., & Born, J. (2004). Nature, 427, 352–355. Sleep inspires insight [睡眠はひらめきをもたらす]
学術誌Natureに掲載された実験。のちの追試では、結果はまちまちでした。
https://doi.org/10.1038/nature02223 - Ambady, N., & Rosenthal, R. (1993). Journal of Personality and Social Psychology, 64(3), 431–441. Half a minute: Predicting teacher evaluations from thin slices of nonverbal behavior and physical attractiveness [30秒:非言語的行動と外見の魅力のごく短い断片から教師の評価を予測する]
3つの研究(中心となる研究は教師13人が対象)。アメリカ心理学会が発行する学術誌に掲載。
https://doi.org/10.1037/0022-3514.64.3.431 - Diaconis, P., & Mosteller, F. (1989). Journal of the American Statistical Association, 84(408), 853–861. Methods for studying coincidences [偶然の一致を研究する方法]
偶然の一致がどのように生じるかについて、2人の統計学者が書いた論文。アメリカ統計学会の機関誌に掲載。
https://doi.org/10.1080/01621459.1989.10478847 - Wilson, T. D., Lisle, D. J., Schooler, J. W., Hodges, S. D., Klaaren, K. J., & LaFleur, S. J. (1993). Personality and Social Psychology Bulletin, 19(3), 331–339. Introspecting about reasons can reduce post-choice satisfaction [理由を内省すると、選択後の満足度が下がることがある]
社会心理学の学術誌に掲載された実験。
https://doi.org/10.1177/0146167293193010 - Dunn, B. D., Galton, H. C., Morgan, R., Evans, D., Oliver, C., Meyer, M., Cusack, R., Lawrence, A. D., & Dalgleish, T. (2010). Psychological Science, 21(12), 1835–1844. Listening to your heart: How interoception shapes emotion experience and intuitive decision making [心臓の声に耳を傾ける:内受容感覚は感情体験と直感的な意思決定をどう形づくるか]
2つの実験。心理科学協会が発行する学術誌に掲載。
https://doi.org/10.1177/0956797610389191
クレジット
トランプの絵柄はAdrian Kennardによるもので、CC0 Public Domainのもとで公開されています。ジェネレーターとソースはme.uk/cards。