Intuition Check
Yksinkertainen, yksityisyyttäsi kunnioittava appi intuition testaamiseen ja harjoittamiseen iPhonelle, iPadille ja Applen sirulla varustetuille Mac-tietokoneille. Harjoita vaistoasi pelikorteilla, luvuilla tai kuvilla – yksin tai lähellä olevan kumppanin kanssa.
Lataa App Storesta → Omat tekoälyllä tehdyt kokoelmat →Intuitio
Mitä intuitio on
Intuitio on sitä, että tiedät jotain osaamatta sanoa, mistä sen tiedät: aavistus, vatsatuntuma, äkillinen varmuus.
Psykologit kuvaavat hyvin yhtä intuition lajia – kokemusta, joka toimii ajattelua nopeammin. Kun ihminen on tehnyt jotain monta kertaa, hän huomaa säännönmukaisuuden, ennen kuin osaa pukea sen sanoiksi: ensin tulee tunne, sanat myöhemmin.1
Monet kuvaavat myös toista lajia: sen tietämistä, mitä mikään kokemus ei olisi voinut heille kertoa – kuka soittaa, ennen kuin puhelin näyttää nimen, tai mikä kortti on kuvapuoli alaspäin. Tieteessä kiistellään siitä, onko tällaista lajia olemassa.23 Juuri tätä toista lajia appi antaa sinun testata satunnaisesti valituilla arvoilla.
Miten se voi ilmetä
Monille ovat tuttuja tällaiset hetket:
- Ajattelet jotakuta ja hetken päästä hän soittaa.
- Otat puhelimen soittaaksesi ystävälle ja se soi kädessäsi – soittaja on juuri se ystävä.
- Heräät pari minuuttia ennen herätyskellon soimista.
- Tiedät, kuka soittaa, ennen kuin katsot näyttöä.
- Mieleesi tulee joku, jota et ole nähnyt pitkään aikaan, ja hän soittaa samana päivänä.
- Ensivaikutelmasi ihmisestä osoittautuu oikeaksi.
- Ongelman ratkaisu tulee mieleen itsestään – aamulla, suihkussa, kävelyllä.
- Tunnet jonkun katsovan sinua, käännyt ympäri ja joku todella katsoo.
Englannissa ja Kaliforniassa satunnaisesti valituille ihmisille tehdyissä puhelinkyselyissä 65–78 % kertoi soittaneensa jollekulle, joka sanoi olleensa juuri soittamassa heille, ja 47–49 % kertoi tienneensä ilman mitään vihjettä, kuka soittaa.45 Useimmat aikuiset uskovat voivansa tuntea, milloin heitä katsoo joku, jota he eivät näe.6
Joillekin näistä on tunnettu selitys. Keho voi seurata, milloin odotat heräväsi: eräässä kokeessa kehoa heräämiseen valmistavan hormonin taso alkoi nousta noin tuntia ennen herätysaikaa, joka ihmisille oli kerrottu.7 Tauko voi auttaa ratkaisemaan ongelman: monissa kokeissa ihmiset ratkaisivat ongelmia paremmin, kun he olivat ensin jättäneet ne joksikin aikaa sivuun,8 ja eräässä tutkimuksessa yön uni yli kaksinkertaisti niiden ihmisten osuuden, jotka löysivät tehtävästä piilevän säännön, jonka avulla tehtävän sai ratkaistua nopeammin.9 Ja ensivaikutelma voi osua oikeaan: ihmiset, jotka eivät tunteneet opettajaa ja katsoivat häntä yhteensä 30 sekuntia ilman ääntä, arvioivat hänet pitkälti samoin kuin hänen opiskelijansa lukukauden lopussa.10
Kerran, kahdesti – tai kerta toisensa jälkeen
Kerran tai kahdesti tällaisen yhteensattuman voi helposti selittää sattumalla. Kun se toistuu kerta toisensa jälkeen, on luontevaa miettiä, onko sen takana jotain muutakin.
Muisti on tässä huono laskija. Se säilyttää ne kerrat, jolloin puhelin soi, ja unohtaa ne monet kerrat, jolloin ajattelit jotakuta eikä mitään tapahtunut. Ja kun päiviä, ihmisiä ja ajatuksia on tarpeeksi, hämmästyttäviä yhteensattumia tapahtuu väistämättä silloin tällöin.11
Siksi kannattaa laskea. Tässä apissa tiedetään tarkasti, kuinka todennäköistä on arvata sattumalta oikein: se riippuu vain siitä, kuinka monta eri arvoa arvonnassa voi tulla. Tilastot näyttävät, pysyvätkö tuloksesi sen rajoissa, mitä sattuma antaisi, vai poikkeavatko ne siitä – katso Tulosten tulkinta.
Intuitio arjessa
Tunteet ja kehon signaalit ovat mukana monissa päätöksissä. Ihmiset, jotka vain valitsivat mieleisensä julisteen, olivat siihen kolmen viikon kuluttua tyytyväisempiä kuin ne, joita oli ensin pyydetty luettelemaan syyt, miksi he pitivät tai eivät pitäneet kustakin julisteesta.12 Toisessa kokeessa ihmiset pelasivat korttipeliä neljällä pakalla: kaksi pakkaa tuotti ajan mittaan voittoa ja kaksi tappiota, mutta pelaajille ei kerrottu, mitkä pakat olivat mitäkin. Keho reagoi ennen jokaista kortin nostoa, ja nämä signaalit kallistuivat eri ihmisillä eri suuntiin: kokonaisuutena joillakin kohti voitollisia pakkoja ja toisilla kohti tappiollisia. Tutkijat arvioivat, kuinka hyvin kukin aisti kehonsa signaaleja, sen perusteella, kuinka tarkasti hän tunsi omat sydämenlyöntinsä. Mitä tarkempi tämä tuntemus oli, sitä tiiviimmin hänen valintansa seurasivat kehon signaaleja – oli siitä sitten hyötyä tai haittaa.13
Intuitio on luotettavimmillaan siellä, missä on todellisia säännönmukaisuuksia, joihin voi nojata, ja nopeaa, selkeää palautetta. Vahva varmuuden tunne ei yksinään ole merkki siitä, että on oikeassa.1
Hyvä yhteys omaan intuitioosi tarkoittaa siis kahta asiaa: että huomaat sen ja että opit tietämään, milloin siihen voi luottaa. Jotta oppisit, milloin siihen voi luottaa, merkitse olotilasi pelatessasi: tilastot vertaavat silloin kierroksiasi olotilan ja vuorokaudenajan mukaan, joten voit nähdä, milloin sinulla menee paremmin. Katso Olotilasi.
Onko sen takana jotain muutakin?
Tiede ei ole ratkaissut, voivatko ihmiset tietää asioita, joita mikään kokemus ei olisi voinut heille kertoa. Vuonna 2018 Amerikan psykologiyhdistyksen päälehdessä julkaistu katsaus päätyi siihen, että näyttö tällaisista ilmiöistä on suunnilleen yhtä vahvaa kuin psykologiassa hyväksytyistä tuloksista.2 Samassa lehdessä julkaistu vastine väitti, että tällaiset ilmiöt ovat mahdottomia ja että tuloksilla täytyy olla muita syitä.3 Kysymys pysyy avoimena, ja appi antaa sinun tarkastella sitä omien kierrostesi avulla.
Näin appi toimii
Kierros
Valitse arvauskokoelma – pelikortit, luvut tai kuvakokoelma – ja yritä aistia arvo, ennen kuin se näytetään. Paljasta se sitten ja katso, olitko oikeassa. Appi laskee osumasi ja vertaa niitä siihen, mitä pelkkä sattuma antaisi.
Passiivinen ja aktiivinen tila
Apissa on kaksi tilaa:
- Passiivinen intuitio – arvo on jo valittu ja kätketty. Yrität aistia, mikä se on.
- Aktiivinen intuitio – mitään ei valita ennen paljastusta. Yrität saada esiin arvon, jota toivot.
Tilastot pitävät nämä kaksi tilaa erillään, joten voit nähdä, kumpi sopii sinulle paremmin.
Kolme tapaa pelata
Päänäkymän yläreunassa olevilla valitsimilla vaihdat pelityylin ja tilan. Samat valinnat ovat myös kohdassa Asetukset → Pelityyli ja tila.
Yksi kerrallaan
Yksi arvo kerrallaan. Paljasta se napauttamalla, kätke se napauttamalla uudelleen ja paljasta sitten seuraava. Kun asetus ”Paljasta kätkemättä” on päällä kohdassa Asetukset → Yksi kerrallaan, jokainen napautus näyttää heti seuraavan arvon. Asetus ”Näytä vihje” lisää arvon alle ohjerivin.
Oletuksena arvausten seurannan asetus ”Tapa” on ”Syötä arvaus”: silloin appi kysyy arvaustasi ennen jokaista paljastusta ja merkitsee kierroksen tuloksen itse. Katso Mitä kirjataan.
Pikavalinta
Kaikki kokoelman arvot ovat näkyvissä yhdessä ruudukossa. Jokainen napautus on oma kierroksensa. Aktiivisessa tilassa arvo arvotaan sillä hetkellä, kun napautat; passiivisessa tilassa se arvotaan etukäteen, heti edellisen napautuksesi jälkeen. Osuma voidaan ilmaista vihreällä välähdyksellä ja värinällä.
Lukukokoelmissa, joissa on yli 1 000 arvoa, ei ole ruudukkoa: pienennä lukualuetta kokoelman asetuksissa tai pelaa pelityylillä ”Yksi kerrallaan”.
Sarja
Valitse aktiivisessa tilassa haluamasi arvo, toivo sitä ja napauta sitä: appi arpoo sarjan arvoja ja laskee, kuinka moni niistä on sama kuin napauttamasi arvo. Sarjassa voi olla 2–12 nostoa tai 100, 1 000, 10 000, 100 000, 1 miljoona tai 10 miljoonaa. Pituuden valitset päänäkymässä. Kohdassa Asetukset → Sarja liukusäädin ”Sarjan kesto” jakaa nostot enintään 10 sekunnin ajalle; nollassa taukoja ei ole. Jokainen sarja kirjataan tilastoihin yhtenä merkintänä.
Pelityylin ”Sarja” valitseminen vaihtaa tilaksi aktiivisen intuition.
Pelikortit ja luvut
Pelikorttikokoelma käyttää 36 tai 52 kortin pakkaa, jokereiden kanssa tai ilman. Lukukokoelma käyttää enintään 9-numeroisia lukuja – numeroiden enimmäismäärän valitset itse. Molempia muutetaan arvauskokoelman asetusnäkymässä: napauta päänäkymässä kokoelmavalitsimen vieressä olevaa ratasta.
Pelkistetty näkymä
Kätke valitsimet, työkalupalkki, olotilapalkki ja vihje koskettamalla ja pitämällä mitä tahansa päänäkymän kohtaa. Tuo ne takaisin koskettamalla ja pitämällä uudelleen. Kierroslaskurit ja tulos pysyvät näkyvissä.
Kohdassa Asetukset → Ulkoasu ja palaute otsikon ”Pelkistetty näkymä” alla asetus ”Näytä painike” lisää työkalupalkkiin silmäpainikkeen – sitä napauttamalla laitat pelkistetyn näkymän päälle – ja asetus ”Muista pelkistetty näkymä” pitää pelkistetyn näkymän päällä käynnistyskerrasta toiseen.
Kierroslaskurit
Päänäkymä voi näyttää, montako kierrosta olet pelannut ja miten sinulla menee: oma laskuri ja oma tulos jokaiselle tilan ja pelityylin yhdistelmälle sekä painike, joka nollaa laskurin ja tyhjentää tuloksen. Myös vaihto toiseen arvauskokoelmaan nollaa kaikki laskurit ja tulokset.
Jotta kierroslaskurit ja tulokset säilyisivät käynnistyskerrasta toiseen, laita päälle asetus ”Tallenna kierroslaskurit ja tulokset” kohdassa Asetukset → Tilastot. Se on käytettävissä, kun asetus ”Tallenna tilastot laitteelle” on päällä.
Arvauskokoelmat
Arvauskokoelma on se, mistä arvaat: pelikortit, luvut tai kuvakokoelma. Aluksi päänäkymässä on vain kokoelmat ”Luvut” ja ”Pelikortit”. Muut apin mukana tulevat kokoelmat voit lisätä napauttamalla päänäkymässä kokoelmavalitsimen vieressä olevaa painiketta .
Kokoelmavalitsin
Päänäkymän yläreunassa oleva kokoelmavalitsin näyttää arvauskokoelmasi. Kun asetus ”Valitsimen tyyli” on oletusarvossaan, valitsin näyttää painikkeet, kun näytettäviä kokoelmia on yksi tai kaksi, ja kolmesta alkaen nykyisen kokoelman nimen, joka avaa kokoelmien luettelon. Jos asetuksessa ”Valitsimen tyyli” on valittuna ”Erillinen näkymä”, valitsin avaa aina tämän luettelon.
Jokaisella kokoelmalla on oma kytkin ”Käytä”. Kokoelmaa, jonka kytkin on pois päältä, ei tarjota missään – ei päänäkymän kokoelmavalitsimessa, ei kumppanipelissä eikä tilastoissa – mutta se pysyy kokoelmaluettelossasi kohdassa Asetukset → Arvauskokoelmat → Hallitse kokoelmia, ja kun laitat kytkimen taas päälle, kokoelman tilastot palaavat.
Kokoelmavalitsimen vieressä oleva painike avaa näkymän ”Lisää kokoelma”. Siinä luetellaan apin mukana tulevat lisäkokoelmat, jotka voi lisätä päänäkymään; niiden alla ovat painike tyhjän kokoelman luomiseen – siihen voit myöhemmin lisätä omia kuviasi – sekä lohko ”Tekoälyavustajasi”, josta voit lisätä tekoälyavustajan tekemän kokoelman. Kokoelmavalitsimen vieressä oleva rataspainike avaa valittuna olevan kokoelman asetukset. Molemmat painikkeet voi kätkeä kohdassa Asetukset → Arvauskokoelmat laittamalla pois päältä asetukset ”Näytä kokoelman lisäyspainike” ja ”Näytä kokoelman asetusten painike”.
Valmiit kokoelmat
Napauta päänäkymässä kokoelmavalitsimen vieressä olevaa painiketta – tai avaa kohta Asetukset → Arvauskokoelmat → Hallitse kokoelmia, napauta painiketta ja valitse ”Valmiit kokoelmat”. Avaa kokoelma ja napauta painiketta ”Lisää omiin arvauskokoelmiini”.
Lisäämäsi kokoelma on oma kopiosi: voit nimetä sen uudelleen, vaihtaa sen kuvien järjestystä, jättää osan kuvista pois pelistä, pelata sillä kumppanin kanssa tai lähettää sen jollekulle.
Kokoelma omista kuvistasi
Päänäkymästä: napauta kokoelmavalitsimen vieressä olevaa painiketta ja sitten valmiiden kokoelmien alla olevaa kohtaa ”Tyhjä kuvakokoelma”. Säilytä nimi ”Omat kuvat” tai kirjoita toinen nimi ja napauta painiketta ”Luo”. Appi vaihtaa uuteen kokoelmaan ja avaa sen.
Tai avaa kohta Asetukset → Arvauskokoelmat → Hallitse kokoelmia, napauta painiketta ja valitse ”Tyhjä kuvakokoelma”. Anna sitten kokoelmalle nimi ja napauta painiketta ”Luo”. Uusi kokoelma avautuu.
Napauta kokoelman sisällä painiketta ja lisää kuvia valitsemalla ”Kuvat” tai ”Tiedostot” (useita kerralla), ota niitä yksitellen valitsemalla ”Kamera” tai sijoita kopioitu kuva tai SVG valitsemalla ”Sijoita leikepöydältä”.
Kuvien nimet
Napauta kuvaa kokoelman omassa näkymässä, niin näet sen suurempana. Sen alla oleva kenttä on ”Nimi”: kirjoita nimi, muuta sitä tai tyhjennä se. Kun kuva lisätään kohteesta ”Tiedostot”, sen nimenä on aluksi tiedoston nimi ilman tiedostopäätettä; kun se lisätään kohteesta ”Kuvat” tai ”Kamera” tai valinnalla ”Sijoita leikepöydältä”, sillä ei aluksi ole nimeä. Jos kokoelmassa on nimiä usealla kielellä, kentän alla oleva ”Nimet kielittäin” sisältää kuvan nimen jokaisella niistä. Kuvan alla näet sen tiedoston muodon ja koon, jonka appi säilyttää.
Tekoälyavustaja voi tehdä sinulle kuvia ja kokonaisia kokoelmia: Omat tekoälyllä tehdyt kokoelmat.
Järjestys, asettelu ja pelissä käytettävät kuvat
Kokoelman omassa näkymässä voit toiminnolla ”Asettele” vetää kuvat uuteen järjestykseen ja määrittää ruudukolle asetukset ”Kuvia rivillä”, ”Tasaus” ja ”Näytä kokonaan”.
Saat lisää vaihtoehtoja koskettamalla ja pitämällä kuvaa:
- Toiminto ”Älä käytä pelissä” pitää kuvan kokoelmassa, mutta sitä ei koskaan arvota. Toiminto ”Käytä pelissä” palauttaa sen peliin.
- Toiminto Merkitse ”?”-paikanvaraajaksi näyttää kyseisen kuvan, kun arvo on vielä kätketty pelityylissä ”Yksi kerrallaan”. Sitä itseään ei koskaan arvota. Kokoelmassa voi olla vain yksi ”?”-paikanvaraaja.
Uudelleennimeäminen ja poistaminen
Kokoelman nimi on sen näkymän ensimmäinen kenttä. Valmiissa kokoelmissa sen muokkaaminen muuttaa nimen apin nykyisellä kielellä; muunkieliset nimet ovat kohdassa ”Nimet kielittäin”.
Kun haluat poistaa kokoelman, pyyhkäise sitä kokoelmaluettelossasi kohdassa Asetukset → Arvauskokoelmat → Hallitse kokoelmia – tai kosketa ja pidä sitä – ja valitse ”Poista”. Appi kysyy ensin varmistuksen. Kokoelman tilastot poistetaan sen mukana.
Kokoelmien lähettäminen
Lähetä kokoelma
Omista kuvistasi tehdyn kokoelman voi lähettää yhtenä tiedostona, jonka tiedostopääte on .guesset. Tiedosto sisältää kuvat, niiden järjestyksen, asettelun ja kokoelman nimet sekä tiedon siitä, mitkä kuvat ovat mukana pelissä ja mikä niistä on ”?”-paikanvaraaja. Kokoelmat ”Pelikortit” ja ”Luvut” sisältyvät appiin, eikä niitä voi lähettää.
- Avaa Asetukset → Arvauskokoelmat → Hallitse kokoelmia.
- Kosketa ja pidä kokoelmaa ja valitse ”Vie…”. Kokoelman sisällä oleva jakopainike tekee saman.
- Valitse, miten lähetät sen: Mail, Viestit, AirDrop, Tiedostot tai jokin muu appi.
Jos haluat pelata kokoelmalla lähelläsi olevan ihmisen kanssa, et tarvitse tiedostoa: katso Pelaaminen omilla kuvilla.
Avaa kokoelma, jonka joku lähetti sinulle
Napauta .guesset-tiedostoa Mail-apissa, Viesteissä tai Tiedostoissa tai hyväksy AirDropilla lähetetty tiedosto. Avaa se sitten Intuition Check -apissa. Siitä tulee oma erillinen kopiosi, joka ilmestyy luettelosi loppuun ja kokoelmavalitsimeen.
Laitteelle jo tallennetun tiedoston voi tuoda myös apin sisältä: napauta kohdassa Asetukset → Arvauskokoelmat → Hallitse kokoelmia painiketta ja valitse ”Tuo tiedostosta”.
Kumppanipeli
Näin se toimii
Kaksi laitetta pelaa yhdessä: toinen pelaaja valitsee arvon ja toinen yrittää arvata sen. Laitteet viestivät vain keskenään (laitteelta laitteelle, kun ne ovat lähellä toisiaan, tai yhteisen Wi‑Fi-verkon kautta). Kumppanipelin kierrokset eivät päädy tilastoihin.
Yhteys
Laita Wi‑Fi päälle kummassakin laitteessa. Samassa Wi‑Fi-verkossa yhteys toimii parhaiten, ja laitteet voivat silloin olla missä tahansa verkon piirissä. Ilman yhteistä verkkoa ne yhdistyvät laitteesta laitteeseen – pidä ne silloin lähellä toisiaan.
Laitteet etsivät toisiaan vain silloin, kun kumppanipeli on auki kummassakin laitteessa.
Aloitus
- Avaa kumppanipeli kummassakin laitteessa: napauta päänäkymän työkalupalkissa olevaa kahden hahmon painiketta tai napauta painiketta ”Avaa kumppanipeli” kohdassa Asetukset → Kumppanipeli. Jos painiketta ei näy, laita päälle asetus ”Näytä kumppanipelin painike” kohdassa Asetukset → Kumppanipeli.
- Kumpikin laite näyttää tekstin ”Etsitään kumppania lähistöltä…” ja sitten toisen laitteen otsikon ”Lähistöllä havaitut:” alla. Laitteet yhdistyvät itsestään.
Ensimmäisellä kerralla laitteesi kysyy, saako appi löytää laitteita lähiverkostasi. Salli se: ilman lupaa laitteet eivät löydä toisiaan.
Kierros
- Valitse otsikon ”Pelaa kokoelmalla:” alta, millä pelataan – mikä tahansa käytössä olevista arvauskokoelmistasi käy.
- Valitse rooli: ”Valitsen kortin” (tai luvun tai kuvan) tai ”Yritän arvata”. Kumppanisi saa toisen roolin.
- Valitsija valitsee arvon ja arvaaja tekee arvauksen. Sitten kumpikin laite näyttää valitun arvon ja arvauksen sekä tekstin ”Oikein!” tai ”Ei tällä kertaa”.
- Painike ”Pelaa uudelleen” vie teidät molemmat takaisin ensimmäiseen vaiheeseen, jossa valitaan seuraavan kierroksen kokoelma ja roolit.
Pelaaminen omilla kuvilla
Kun pelaat jollakin omalla kuvakokoelmallasi, kumppaniasi pyydetään ensin lataamaan se painikkeella ”Lataa”, ellei hänellä ole jo samaa kokoelmaa. Hänen kopiotaan käytetään vain kumppanipelissä, eikä se koskaan muuta hänen omia kokoelmiaan. Lähetetään vain ne kuvat, joita hänellä ei vielä ole.
Kun asetus ”Säilytä vastaanotetut kuvakokoelmat” on päällä kohdassa Asetukset → Kumppanipeli, seuraava peli saman kumppanin kanssa alkaa ilman odottelua. Jos asetus on pois päältä, vastaanotetut kokoelmat poistetaan, kun lähdet kumppanipelistä. Vastaanotetut kokoelmat on lueteltu kohdassa Asetukset → Arvauskokoelmat → Hallitse kokoelmia otsikon ”Vastaanotettu kumppanilta” alla, ja siellä painike ”Lisää omiin arvauskokoelmiini” tekee kokoelmasta kopion, joka on kokonaan sinun.
Kumppanisi nimi
Apit näkevät iPhonessa ja iPadissa vain yleisen laitenimen, kuten ”iPhone”, joten kaksi laitetta voi näyttää samalta. Kun yhteys on muodostunut, napauta kumppanisi nimen vieressä olevaa kynäkuvaketta ja kirjoita haluamasi nimi. Nimi näkyy vain omalla laitteellasi.
Jos laitteet eivät löydä toisiaan
- Avaa kumppanipeli kummassakin laitteessa niin, että Wi‑Fi on päällä.
- Yhdistä molemmat laitteet samaan Wi‑Fi-verkkoon, jos voit; muuten pidä ne lähellä toisiaan.
- Vierasverkot ja julkiset verkot – hotelleissa, kahviloissa ja toimistoissa – estävät usein laitteiden välisen liikenteen. Kokeile toista verkkoa tai kokonaan ilman verkkoa niin, että laitteet ovat vierekkäin.
- Jos et sallinut lähiverkon käyttöä, salli se jälkikäteen Asetukset-apissa: Tietosuoja ja suojaus → Lähiverkko, ja laita siellä Intuition Check päälle.
- Jos laite näkyy otsikon ”Lähistöllä havaitut:” alla mutta ei koskaan yhdisty, lähde kumppanipelistä kummassakin laitteessa ja avaa se uudelleen: haku alkaa alusta.
- Yhdessä pelaa kerrallaan vain kaksi laitetta. Kolmas laite jatkaa etsimistä, kunnes jompikumpi parista lähtee pelistä.
Tilastot
Mitä kirjataan
Pelityylit ”Pikavalinta” ja ”Sarja” kirjaavat kierroksesi aina. Pelityyli ”Yksi kerrallaan” kirjaa ne sen mukaan, mitä on valittu asetuksessa ”Tapa” otsikon ”Arvausten seuranta” alla kohdassa Asetukset → Yksi kerrallaan:
- ”Syötä arvaus” – oletus. Valitset arvauksesi ennen paljastusta, ja appi ratkaisee, oliko arvaus oikein.
- ”Merkitse itse” – napauta jokaisen paljastuksen jälkeen merkkiä ✓ tai ✗. Paljastusta, jonka ohitat merkitsemättä, ei lasketa.
- ”Pois” – pelityyli ”Yksi kerrallaan” ei kirjaa mitään.
Jos arvauskokoelmassa on vain yksi mahdollinen arvo, mitään ei kirjata. Kumppanipelin kierroksia ei kirjata koskaan.
Tilastojen tarkastelu
Napauta päänäkymän työkalupalkissa olevaa tilastojen painiketta tai napauta painiketta ”Näytä tilastot” kohdassa Asetukset → Tilastot. Aluksi tilastot näyttävät sen arvauskokoelman, pelityylin ja tilan tulokset, joita parhaillaan käytät. Yläreunan suodattimet rajaavat niitä: ”Aikaväli”, ”Arvauskokoelma”, ”Pelityyli”, ”Tila” ja – kun merkitset olotilaasi – ”Olotila”.
Osiot, joita et tarvitse, voi laittaa pois päältä tilastojen asetusnäkymässä – avaa se tilastonäkymän asetuspainikkeella tai päänäkymästä kohdan Asetukset → Tilastot kautta.
Lukujen merkitys selitetään kohdassa Tulosten tulkinta.
Tilastojen säilyttäminen
Aluksi tilastot säilyvät vain muistissa nykyisen istunnon ajan: ne katoavat, kun appi sulkeutuu – myös silloin, kun iOS sulkee sen taustalla. Jos haluat säilyttää ne, laita päälle asetus ”Tallenna tilastot laitteelle” – tilastonäkymän yläosassa tai kohdassa Asetukset → Tilastot. Myös nykyisen istunnon kierrokset tallennetaan. Apin aiempien istuntojen kierroksia, joita ei koskaan tallennettu, ei voi palauttaa.
Kytkimen laittaminen pois päältä poistaa tallennetut tilastot. Appi kysyy ensin: ”Lopetetaanko tilastojen tallentaminen?”; kun napautat painiketta ”Poista tallennetut tilastot”, jäljelle jäävät vain ne kierrokset, jotka on pelattu sen jälkeen, kun appi viimeksi avattiin, ja nekin vain muistissa: ne katoavat, kun appi suljetaan. Toimintoa ei voida perua.
Tilastojen tyhjennys
Tilastonäkymän alaosassa:
- Tyhjennä kaikki tilastot kokoelmasta ”…” – kaikki suodattimessa valitulla arvauskokoelmalla kirjatut tilastot.
- Poista suodatetut tilastomerkinnät (määrä: …) – vain suodattimien näyttämät merkinnät.
- Tyhjennä kaikki tilastot – kaikki.
Appi pyytää vahvistamaan jokaisen näistä poistoista, eikä yhtäkään niistä voi perua.
Tilastojen vienti
Napauta tilastonäkymän työkalupalkissa olevaa Jaa-painiketta ja sitten ”Vie tilastot tekstitiedostoon”. Tiedosto on taulukko (CSV), joka sisältää täsmälleen suodattimiesi näyttämät merkinnät: yksi rivi kutakin kierrosta kohden tai pelityylissä ”Sarja” yksi rivi kutakin sarjaa kohden. Taulukkolaskenta-apit, kuten Numbers, voivat avata sen. Voi myös olla hyödyllistä näyttää tämä tiedosto tekoälyavustajallesi ja kysyä esimerkiksi: ”Millaisissa olosuhteissa intuitioni näyttää toimivan paremmin tai huonommin?”
Tulosten tulkinta
Tilastot eivät vain laske osumia. Ne vertaavat tuloksiasi siihen, mitä satunnainen arvailu saisi, kun mahdollisia arvoja on yhtä monta, ja kertovat selvin sanoin, onko tuloksesi sattumaa korkeampi, sitä matalampi vai sattuman rajoissa.
Tuloksesi ja sattuma
Otsikon ”Oikeat arvaukset” alla näkyvät rinnakkain ”Tuloksesi” ja ”Sattuma antaisi”. Sama 30 % voi tarkoittaa päinvastaisia asioita: kun mahdollisia arvoja on 3, satunnainen arvailu saa noin 33 %, joten 30 % on hieman sattumaa matalampi; 52 kortin pakalla se saa noin 2 %, joten 30 % on paljon sattumaa korkeampi. Sattuman lukema lasketaan kunkin kierroksen omasta mahdollisten arvojen määrästä.
Tulkinta
Appi antaa tulkinnan: tulkinnasta ”Sattuman rajoissa” hieman ja selvästi sattumaa korkeampien tai matalampien tulkintojen kautta aina tulkintaan ”Paljon sattumaa korkeampi” tai ”Paljon sattumaa matalampi”. Lisäksi appi kertoo, kuinka harvinainen tällainen tulos olisi satunnaisella arvailulla, esimerkiksi ”noin kerran 300 kerrasta”.
Kun kierroksia on vähän, tulokset heittelevät paljon pelkän sattuman takia. Siksi tulkinta muuttuu vakaammaksi jokaisen uuden kierroksen myötä.
Passiivinen ja aktiivinen intuitio rinnakkain
Kun sinulla on kierroksia kummassakin tilassa, osio ”Passiivinen ja aktiivinen intuitio” näyttää kummankin tilan osumat ja osumaprosentin, joten näet, kumpi sopii sinulle paremmin. Pelityylille ”Sarja” osiota ei näytetä.
Parhaat putket
Osio ”Parhaat putket” luettelee pisimmät putkesi, joissa arvasit peräkkäin oikein, sekä kunkin putken päivän, kellonajan ja olotilan, jonka olit merkinnyt. Tauko, joka on pidempi kuin asetuksen ”Kierrosten välinen enimmäistauko” arvo (sen asetat samassa osiossa), katkaisee putken, ja samoin käy, jos merkitsemäsi olotila muuttuu.
Ajan mittaan
Osio ”Osumaprosentti ajan mittaan” piirtää päivittäisen osumaprosenttisi, kun sinulla on kierroksia kahtena eri päivänä. Osio ”Vuorokaudenajan mukaan” näyttää aamun, iltapäivän, illan ja yön erikseen.
Arvot
Kun tilastot koskevat yhtä arvauskokoelmaa, jossa on enintään 100 arvoa, ne luettelevat arvot, jotka arvasit oikein useimmin, sekä arvot, jotka valitset arvaukseksesi useimmin ja harvimmin – myös ne, joita et valitse koskaan, kunhan olet tehnyt yhtä monta arvausta kuin kokoelmassa on arvoja.
Ihmiset suosivat usein joitakin arvoja ja välttelevät toisia, ja joitakin arvoja saatetaan arvata oikein useammin kuin toisia.
Tulokset voivat vaihdella
Tuloksesi voivat muuttua olotilasi ja olosuhteidesi mukaan. Mikään seuraavista ei ole varmaa tietoa – ne ovat asioita, jotka voivat pitää paikkansa ja jotka kannattaa panna merkille pelatessasi:
- Olotilasi. Saatat pärjätä eri tavalla heti herättyäsi tai myöhään illalla, levänneenä tai väsyneenä, rauhallisena tai stressaantuneena. Merkitse olotilasi pelatessasi, niin tilastot vertailevat kierroksiasi olotilan ja vuorokaudenajan mukaan.
- Itsevarmuus. Se, oletko varma itsestäsi vai täynnä epäilyksiä, voi olla yhteydessä siihen, miten onnistut.
- Myös sattumaa matalampi tulos on poikkeama. Jos osut oikeaan selvästi harvemmin kuin sattuma ennustaisi, sekin on poikkeama sattumasta. Yksi tapa nähdä asia on, että intuitio toimii sillä hetkellä sinua vastaan – eikä niin, että mitään ei tapahtuisi.
- Arvot. Saatat arvata jotkin arvot oikein paljon useammin kuin toiset ja joitakin et ehkä koskaan, vaikka valitset niitä yhtä usein kuin muita.
Mitä luvut voivat kertoa
Appi voi kertoa, poikkeavatko tuloksesi pelkästä sattumasta – mutta ei koskaan sitä, miksi, vaikka syy näyttäisi tiedoista ilmeiseltä. Pidä lukuja asiana, jota voit tutkia – älä pysyvänä mittana itsestäsi. Katso myös Intuitio.
Olotilasi
Olotilapalkki
Päänäkymän olotilapalkissa voit merkitä, millainen olosi on juuri nyt: ”Levännyt” tai ”Väsynyt”, ”Rauhallinen” tai ”Stressaantunut”, ”Itsevarma” tai ”Epävarma”, ”Keskittynyt” tai ”Hajamielinen”, mielialasi sekä olosuhteet, kuten ”Juuri heränneenä”, ”Kahvin jälkeen” tai ”Treenin jälkeen”. Merkitsemäsi olotila kirjataan jokaiselle kierrokselle, jonka pelaat siitä eteenpäin, kunnes muutat sitä tai appi unohtaa sen.
Tällöin tilastot vertailevat kierroksiasi olotilan ja vuorokaudenajan mukaan, ja jokaisen putken kohdalla näkyy olotila, jonka olit merkinnyt. Katso kohta Tulokset voivat vaihdella.
Milloin appi unohtaa merkinnän
Sen päättää asetus ”Nollaa merkitty olotila” kohdassa Asetukset → Olotilasi:
- ”Kun appi käynnistyy” – oletus. Seuraavalla käynnistyskerralla mitään ei ole merkitty.
- ”Tauon jälkeen” – appi unohtaa merkinnän, kun olet ollut pelaamatta pidempään kuin asetuksessa ”Tauko” valitsemasi ajan (15 minuutista 1 päivään).
- ”Ei koskaan” – merkintä säilyy, kunnes muutat sitä.
Omat olotilat
Kohdassa Asetukset → Olotilasi → Hallitse olotiloja voit nimetä olotiloja uudelleen, muuttaa niiden järjestystä, lisätä ja kätkeä niitä, lisätä omia akseleita ja laittaa akselin pois päältä sen omalla kytkimellä ”Käytä”: pois päältä oleva akseli poistuu olotilapalkista, uudet kierrokset eivät kirjaa sitä ja tilastot jättävät sen pois.
Jos haluat poistaa palkin kokonaan, laita pois päältä asetus ”Merkitse olotila kierrosten aikana”; silloin olotilaa ei kirjata lainkaan.
Palkki on kätketty, kun pelkistetty näkymä on päällä, sekä pelityylissä ”Yksi kerrallaan”, kun arvausten seuranta on pois päältä.
Ulkoasu ja ominaisuudet
Teemat
Kohdassa Asetukset → Ulkoasu ja palaute on neljä teemaa – ”Hiekka”, ”Valtameri”, ”Metsä” ja ”Iltahämärä” – ja jokaisesta on vaalea ja tumma versio. Asetuksella ”Ulkoasu” valitset vaihtoehdon ”Vaalea”, ”Tumma” tai ”Järjestelmä”; kun valintana on ”Järjestelmä”, appi noudattaa laitteesi asetusta ja vaihtuu sen mukana. Teema värittää myös pelikortit ja suurimman osan valmiiden kokoelmien kuvista.
Palaute
Otsikon ”Osumapalaute” alla asetukset ”Värinä” ja ”Animaatio” merkitsevät oikean arvauksen värähdyksellä ja vihreällä välähdyksellä; kumman tahansa voi laittaa pois päältä. Ne toimivat pelityylissä ”Pikavalinta” jokaisella napautuksella, pelityylissä ”Sarja” silloin, kun sarjan jokainen nosto osuu, ja pelityylissä ”Yksi kerrallaan” silloin, kun syötät arvauksesi ennen paljastusta. Kun arvaus ei osu, ei tule värähdystä eikä välähdystä. Värinä vaatii lisäksi, että asetus ”Järjestelmän tuntopalaute” on päällä Asetukset-apissa kohdassa Äänet ja tuntopalaute.
Asetus ”Sykkivä animaatio napautettaessa” saa napauttamasi ruudun sykkimään lyhyesti pelityyleissä ”Pikavalinta” ja ”Sarja” sekä paljastamasi arvon pelityylissä ”Yksi kerrallaan” silloin, kun merkitset kierrokset itse tai et seuraa niitä.
Selkeä päänäkymä
Lähes kaiken päänäkymässä näkyvän voi kätkeä. Jokainen kytkin on siinä asetusnäkymässä, johon se kuuluu:
- Asetukset → Pelityyli ja tila: kaksi kytkintä ”Näytä valitsin”, toinen pelityylille ja toinen tilalle.
- Asetukset → Arvauskokoelmat: ”Näytä valitsin”, ”Näytä kokoelman lisäyspainike”, ”Näytä kokoelman asetusten painike”.
- Asetukset → Pikavalinta: ”Näytä ruudukon valintojen painike”.
- Asetukset → Yksi kerrallaan: ”Näytä vihje”.
- Asetukset → Sarja: ”Näytä sarjan pituus päänäkymässä”, ”Näytä sarjan kesto päänäkymässä”, ”Näytä ruudukon valintojen painike” (sama kytkin kuin kohdassa Asetukset → Pikavalinta).
- Asetukset → Olotilasi: ”Merkitse olotila kierrosten aikana”.
- Asetukset → Tilastot: ”Näytä tilastojen painike”.
- Asetukset → Kumppanipeli: ”Näytä kumppanipelin painike”.
- Jokaisen pelityylin (”Pikavalinta”, ”Yksi kerrallaan”, ”Sarja”) asetukset: ”Näytä pelatut kierrokset”, ”Näytä Tulokset-kytkin” ja ”Näytä tulos”.
Jos haluat poistaa yhden arvauskokoelman kokoelmavalitsimesta, laita pois päältä kytkin ”Käytä” kyseisen kokoelman asetuksissa; silloin kokoelma poistuu myös kumppanipelistä ja tilastoista. Kun laitat pelkistetyn näkymän päälle, suurin osa päänäkymän elementeistä kätkeytyy kerralla.
Ominaisuudet
Kohdassa Asetukset → Ominaisuudet on kytkin ominaisuudelle ”Sarja-pelityyli” ja toinen ominaisuudelle ”Kierroslaskurit ja tulokset päänäkymässä”. Pois päältä laitettu ominaisuus katoaa päänäkymästä ja Asetuksista.
Kieli
Kohdassa Asetukset → Kieli voit valita apin kielen laitteesi kielestä riippumatta, ja se määrää myös, miten luvut ja päivämäärät kirjoitetaan. Otsikon ”Ehdotetut kielet” alla luettelossa on ensin järjestelmän kieli ja sitten jokainen niistä laitteesi kielistä, jotka apissa on tarjolla, siinä järjestyksessä, joka laitteellesi on asetettu; kaikki muut kielet seuraavat otsikon ”Muut kielet” alla. Jos uutta kieltä luetaan toiseen suuntaan, sulje appi vaihdon jälkeen ja avaa se uudelleen (kirjoitussuunta vaihtuu oikein vasta uudelleenkäynnistyksen jälkeen).
Asetuksissa rivin ”Kieli” alapuolella on kytkin ”Näytä vihjeet Asetuksissa”; se näyttää tai kätkee asetusten alla olevat selitykset.
Ilmainen tunti ja tilaus
Ilmainen tunti
Apin voi ladata ilmaiseksi, ja siihen sisältyy yksi tunti apin käyttöaikaa, jonka aikana voit kokeilla kaikkea, mitä siinä on. Tuntiin lasketaan vain aika, jolloin appi on auki ja näkyvissä, ja se kertyy kaikista istunnoistasi yhteensä – kun appi on suljettuna tai taustalla, aikaa ei kulu.
Kun tunti on käytetty, tilausnäkymä avautuu itsestään. Jos aika ei riittänyt tilauspäätöksen tekemiseen, voit ottaa lisää: painike ”Nollaa ilmainen tunti” antaa sinulle uuden tunnin enintään 3 kertaa – yhteensä 4 tuntia ilmaista aikaa.
Tilaus
Jos haluat jatkaa apin käyttöä sen jälkeen, tarjolla on tilaus kahdella vaihtoehdolla: ”Kuukaudeksi” ja ”Vuodeksi”. Tilaus tukee Perhejakoa.
Tilaaminen
Avaa Asetukset → Tilaus → Tilaa.
Hallinta ja peruuttaminen
Apple laskuttaa tilaukset. Kohta Asetukset → Tilaus → Hallitse tilausta vie sinut omaan tilaukseesi. Apin tilausta voi hallita myös tavalliseen tapaan Apple-tilisi tilauksissa laitteesi asetuksissa. Kun peruutat tilauksen, se ei enää uusiudu automaattisesti, mutta käyttöoikeutesi säilyy nykyisen jakson loppuun.
Kuukausitilaaja voi siirtyä vuositilaukseen kohdasta Asetukset → Tilaus → Vaihda vuositilaukseen.
Hyvitykset
Hyvitykset hoitaa Apple: pyydä hyvitystä osoitteessa reportaproblem.apple.com. Meillä ei ole pääsyä maksutietoihisi emmekä voi itse myöntää hyvitystä – mutta kirjoita meillekin, jos jokin meni vikaan, koska vain siten saamme siitä tiedon.
Oston palauttaminen
Avaa uudessa laitteessa Asetukset → Tilaus → Tilaa ja napauta painiketta ”Palauta ostot”. Näin palautuu myös tilaus, jonka perheenjäsen jakaa kanssasi. Käytä sitä Apple-tiliä, jolla tilaus tehtiin, tai jotakin samaan perheryhmään kuuluvaa tiliä.
Tietosi
Lyhyesti
Tilejä tai palvelimia ei ole. Appi ei lähetä tietojasi meille eikä millekään muulle yritykselle. Kumppanipeli vaihtaa tietoja vain toisen laitteen kanssa – molempien laitteiden yhteisessä Wi‑Fi-verkossa tai laitteesta laitteeseen, kun ne ovat lähellä toisiaan.
Missä tietoja säilytetään
Asetuksesi, arvauskokoelmasi – myös niihin lisäämäsi kuvat – ja olotilaluettelosi tallennetaan laitteellesi apin omaan tallennustilaan. Kunnes laitat päälle asetuksen ”Tallenna tilastot laitteelle”, tilastot säilyvät vain muistissa apin ollessa käynnissä.
Kuten minkä tahansa muun apin tiedot, kaikki tämä päätyy laitteesi varmuuskopioihin.
Apissa ei ole analytiikkaa eikä kaatumisraportointia.
Kun kirjoitat meille
Meille lähettämäsi sähköposti on tavallista kirjeenvaihtoa: säilytämme sitä vain niin kauan kuin sinulle vastaaminen vaatii.
Kaikki yksityiskohdat ovat tietosuojakäytännössä.
Omat tekoälyllä tehdyt kokoelmat
Voit pyytää tekoälyavustajaa, esimerkiksi chatbottia, piirtämään kuvia arvauskokoelmaan tai tekemään kokonaisen kokoelman. Kuvat ovat SVG-piirroksia. SVG-kuva voi sisältää tekstinsä usealla kielellä, ja appi näyttää silloin tekstit sillä kielellä, joka apille on asetettu. Kuva voi myös saada apin teeman värit sekä teeman vaaleassa että tummassa versiossa. Kokoelmalla voi olla oma ”?”-paikanvaraaja: kuva, joka näytetään, kun arvo on kätketty. Avustaja tarvitsee tiedostomuotojen kuvauksen; jokaisessa alla olevassa pyynnössä on tämän kuvauksen osoite.
Näin teet kokoelman
- Kopioi jokin alla olevista pyynnöistä avustajalle ja muokkaa sitä haluamallasi tavalla: vaihda aihe, kuvien määrä (2–200) tai kielet.
- Jos avustaja ei osaa avata verkkosivuja, anna sille myös tiedostomuotojen kuvaus: napauta kohdassa Tiedostomuotojen kuvaus tekoälylle painiketta ”Kopioi” ja sijoita kuvaus samaan keskusteluun – tai napauta ”Tallenna” ja liitä tallennettu tiedosto.
- Avustaja antaa kokoelman vastauksessaan yhtenä koodilohkona, jonka ympärillä on usein muutama selittävä sana. Kopioi vain koodilohko: monissa chat-apeissa sillä on oma kopiointipainikkeensa.
- Napauta apissa päänäkymän painiketta ja napauta näkymässä ”Lisää kokoelma” painiketta ”Sijoita leikepöydältä”. Jos avustaja toimii toisella laitteella, esimerkiksi Macilla, tallenna koodilohko siellä tiedostoksi, jonka nimen lopussa on .json, ja napauta sen sijaan ”Tuo tiedostosta”. Uusi kokoelma lisätään ja valitaan; siirry päänäkymään napauttamalla ”Aloita arvaaminen”. Samat painikkeet ovat myös suoraan näiden vaiheiden alla.
Jos tulee virhe, pyydä avustajaa korjaamaan se.
Kokoelma ilman kuvatekstejä:
Tee Intuition Check -appiin arvauskokoelma nimeltä ”Eläimet”: 10 SVG-kuvaa eri eläimistä, ilman kuvatekstejä. Lue ensin tiedostomuotojen kuvaus ja noudata sitä: https://intuition-check.com/llm-formats.txtKokoelma, jonka jokaisessa kuvassa on kuvateksti. Kuvateksti ei muutu, kun apin kieli vaihtuu:
Tee Intuition Check -appiin arvauskokoelma nimeltä ”Hedelmät”: 8 SVG-kuvaa eri hedelmistä, jokaisessa piirroksen alla kuvateksti: hedelmän nimi. Lue ensin tiedostomuotojen kuvaus ja noudata sitä: https://intuition-check.com/llm-formats.txtKokoelma, jossa on nimet usealla kielellä. Jokainen kuvateksti näyttää kuvan nimen apin kielellä:
Tee Intuition Check -appiin monikielinen arvauskokoelma nimeltä ”Planeetat”: 8 SVG-kuvaa planeetoista, jokaisessa kuvateksti, joka näyttää kuvan nimen apin kielellä. Anna nimet suomeksi, saksaksi ja hindiksi. Lue ensin tiedostomuotojen kuvaus ja noudata sitä: https://intuition-check.com/llm-formats.txtKokoelma, jonka kuvat saavat apin teeman värit:
Tee Intuition Check -appiin arvauskokoelma nimeltä ”Sää”: 8 SVG-kuvaa – aurinko, pilvi, sade, lumi, ukonilma, tuuli, sumu ja sateenkaari – ilman kuvatekstejä. Niiden värien on mukauduttava apin teemaan sekä vaaleassa että tummassa versiossa. Lue ensin tiedostomuotojen kuvaus ja noudata sitä: https://intuition-check.com/llm-formats.txtNäin teet yhden kuvan
Avustaja voi tehdä myös yksittäisen kuvan. Kopioi sen koodilohko, avaa jokin omista kuvakokoelmistasi, napauta ja napauta ”Sijoita leikepöydältä”. Kuva lisätään ilman nimeä: napauta sitä ja kirjoita nimi kenttään ”Nimi”. Voit myös tallentaa koodilohkon tiedostoksi, jonka nimen lopussa on .svg, napauttaa sitten kokoelmassa ja valita ”Tiedostot”; tiedoston nimestä ilman .svg-päätettä tulee kuvan nimi.
Piirrä yksi SVG-kuva kissasta Intuition Check -appiin. Lue ensin tiedostomuotojen kuvaus ja noudata sitä: https://intuition-check.com/llm-formats.txtMitä muuta kokoelmassa voi olla
Pyydä avustajaa selittämään, mitä tiedostomuodot sallivat, ja antamaan jokaisesta mahdollisuudesta esimerkkipyyntö:
Lue Intuition Check -apin tiedostomuotojen kuvaus: https://intuition-check.com/llm-formats.txt Kerro lyhyesti ja yksinkertaisin sanoin, mitä kokoelmissa ja kuvissa voi tehdä: miten kuvat voivat mukautua apin teemaan – eri teemat, vaalea ja tumma versio; miten kokoelman ja sen kuvien nimille voi antaa käännöksiä muille kielille; millaisia kuvatekstejä kuvassa voi olla; mitä kokoelman ”?”-paikanvaraaja (sen selkäpuoli) voi näyttää. Anna jokaisesta mahdollisuudesta esimerkkipyyntö, jonka voin lähettää sinulle. Älä piirrä vielä mitään.Tiedostomuotojen kuvaus tekoälylle
Tiedostomuotojen kuvaus on kirjoitettu englanniksi tekoälyavustajaa varten, ei ihmisen luettavaksi. Sama kuvaus on sivustolla osoitteessa, joka on yllä olevissa pyynnöissä.
This is a specification for language models; it is not formatted for human reading.
Format version: 1
Stable URL: https://intuition-check.com/llm-formats.txt
# Intuition Check: how to make SVG pictures and guess sets
Intuition Check is an iOS app. The app picks one picture of a guess set, hidden, and the user guesses which one.
A guess set is a named, ordered list of pictures. This text tells you how to produce (A) a whole guess set as
one JSON object, or (B) one picture as one SVG document, so that the app accepts it and draws it well.
The user's wishes always win. Every rule, default and style advice in this text is what you do when the user
has not said otherwise: anything the user asks for — any texts, any number of them, any place, size, shape,
colour or layout, a caption over the drawing, a word along an arc — overrides it. Only facts about the app
cannot be overridden, because the app enforces them (what it accepts and refuses, what it removes, how it
draws: sections 2, 3, 5 and the theme rules of 6 — but a sentence there that tells you what to do is still a
default, not a fact about the app); if a wish runs into one of them, do the closest thing the app allows and
say so.
## When the user asks what the formats allow (to explain, not to make)
Answer in the user's language, in plain words, without code. Keep apart what the app does and what you do by
default. The sizes, positions and orders in this text, and its sentences that tell you what to do ("put",
"give", "write", "keep"), are your defaults for a good result: the app does not check them and the user may
ask otherwise. Do not retell them as rules of the app ("must", "required", "not allowed"); say "by default I …".
What the app itself does:
- Themes: four themes, each light and dark. The app never recolours a picture on its own; a picture follows
the theme only where its own file says so (section 6), which you write when asked.
- Names: a set needs a name; a picture's name is optional. The set and every picture may have translations,
each its own languages; the app shows the one for the app language, else the default name.
- Captions: text in a picture is part of the drawing; the app never writes or translates it. A caption is one
fixed text, or holds versions in any number of languages, two included, and the app language picks one.
- The "?" placeholder: a set without a cover shows the app's own "?". The app draws no cover itself. A cover
is a picture like any other: it may show anything, with or without text, follow the theme and the app
language, and stand anywhere in the set.
- Limits: at least 2 pictures to guess (a cover is not one of them), at most 200 in all, 10 MB per SVG; one
refused picture refuses the whole set.
Do not translate the themes' code words (section 6).
Terms used below:
- name: the picture's name as stored in the app (`name`, `nameTranslations`). It is data, not part of the drawing.
- caption: a text drawn inside the picture (an SVG `<text>`). Optional. See section 4.
- app language: the language the app's interface is set to, in the app itself; it may differ from the device's
language. One of the codes in section 3.
- user's language: the language the user writes to you in, unless the user names another.
## 1. Output contract
A. The user asks for a SET (several pictures, "guess set", "set"):
- Answer with ONE JSON object as defined in section 2, in ONE code block. Nothing else is needed.
- If you add words outside the code block, they must not contain `{` or `}`: the app reads the pasted text
from the first `{` to the last `}`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block (chat apps usually show a copy button on it) and paste it into Intuition Check as a new set — or,
on another device, to save it as a file whose name ends in .json and open that file in the app.
B. The user asks for a single PICTURE:
- Answer with ONE SVG document (section 5) in ONE code block.
- If you add words outside the code block, they must not contain `<svg` or `</svg>`: the app reads the
pasted text from the first `<svg` to the last `</svg>`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block and paste it into one of their picture sets in Intuition Check; the picture is added without a
name. Or to save it as a file whose name ends in .svg and add that file to a set: the file name without
".svg" becomes the picture's name, so suggest a file name that is the name, e.g. `Cat.svg`.
In both: do not name the app's buttons or screens from memory, and do not translate their names yourself. The
app's help exists in every language of the app, with the exact names the app shows in that language; the steps
are in its section "#ai_sets", and the page for each language is listed in https://intuition-check.com/llms.txt. If
you can open web pages and the user wants the steps, take the names from the page in the user's language.
Otherwise the one sentence above is enough: the app's help and its own screens show the user where to paste.
Ask first, or proceed:
- Proceed without questions. Decide what the request leaves open, and say what you decided in a sentence or
two beside the code block:
- which things of a kind ("five animals": choose the animals);
- how many pictures, if no number is given: 4;
- the regional form of the user's language: take the likeliest and name it (e.g. "Canadian French");
- translations: as well as you can; name the languages you are least sure of;
- themes not mentioned: fixed colours, and one sentence that a version following the app's themes can be
made;
- a cover with nothing said about what it shows: the question mark (8c).
- Ask only when you cannot start: you cannot tell which language the names should be in, or the request names
no subject at all. Then at most 2 questions, in ONE message, in the user's language, each with the choice
you will make if the user does not mind; no code block in that message. Never ask what the message already
says. Plain words: no "code block", "JSON", "opaque", "plate", "import", nothing about how the format works.
- If you cannot ask (there is no dialogue), or the user tells you not to: proceed.
- What you say beside the code block is in the user's words: "its own background", not "opaque plate";
language names, not codes; at most four short points. The file endings .json and .svg are allowed: the
user needs them.
- Like all words outside the code block: no `{` or `}` next to a set, no `<svg` next to a picture. Do not
quote code outside the code block.
Defaults when the request does not say otherwise:
- No caption text in the drawing (section 4, option 1).
- No theme colours (section 6). Fixed colours of your own.
- Names: always give every picture a `name`, in the user's language. Give no `nameTranslations` unless the
user asks for other languages or for captions in several languages (section 4, option 4).
- Number of pictures: what the user asked for; never fewer than 2 or more than 200.
- No cover (section 2). A cover the user asks for is extra: it is not one of the pictures asked for.
## 2. The set format (JSON)
```json
{
"intuitionCheckSet": 1,
"name": "Animals",
"nameTranslations": { "ru": "Животные", "de": "Tiere" },
"images": [
{ "name": "Cat", "nameTranslations": { "ru": "Кот", "de": "Katze" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><circle cx=\"50\" cy=\"56\" r=\"30\" fill=\"#f57c00\"/><path d=\"M24 44 L28 14 L48 30 Z M76 44 L72 14 L52 30 Z\" fill=\"#f57c00\"/></svg>" },
{ "name": "Fish", "nameTranslations": { "ru": "Рыба", "de": "Fisch" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><ellipse cx=\"44\" cy=\"50\" rx=\"30\" ry=\"18\" fill=\"#1976d2\"/><path d=\"M70 50 L92 32 L92 68 Z\" fill=\"#1976d2\"/></svg>" }
]
}
```
(The drawings above are kept tiny to show the shape of the file. More examples are in section 8.)
Keys:
- `intuitionCheckSet` (required): the integer 1.
- `name` (required): the set's default name. Not empty.
- `nameTranslations` (optional, on the set and on each image): object, language code → name. Codes: section 3.
- `images` (required): array of at most 200 objects, at least 2 of them pictures to guess (a cover is one
more, not one of the 2).
Array order = display order. Each object:
- `name` (optional in the format; always give it): the picture's default name.
- `nameTranslations` (optional): as above.
- `svg` (required): one complete SVG document as a JSON string (section 5).
- `cover` (optional): the JSON literal `true` on the picture that is the set's cover (below). Leave it out
on every other picture.
- Unknown keys are ignored. Do not add any.
The cover: while the app hides the value to guess, it shows a "?" in its place. A set — any set, with or
without captions — may bring its own picture for that place: the cover. Give one ONLY when the user asks for
it (a cover, a back, a placeholder, a question-mark picture). It shows what the user wants: for a set of
playing cards, for example, the pattern of a card's back. If the user does not say what it shows, draw the set's
own frame, with a question mark where the other pictures have their subject (8c; the last picture of 8f);
when the pictures' plates differ in colour, a plate of the same family (8f: a neutral grey). Exactly one
picture gets `"cover": true` (if several do, the first counts and the others are ordinary pictures). The
cover is never an answer, so the set still needs at least 2 other pictures. Put it last in `images` (your default; the app takes it at any place). Give it
a `name` in words ("Question mark", not "?") and, in a multilingual set, `nameTranslations` in the same
languages as the pictures: the app shows the cover's name in the set's list of pictures, in the app language.
By default the cover has no caption (no word under it); the app draws any text it has. Its question mark is the cover's subject; it only borrows the
`class="caption"` pattern of section 4, option 4, so that it changes with the app language. Write the mark
as text (preferred) in two forms: `?`, and `؟` for Arabic and Urdu (the form those languages write). The app
does not change the mark itself: the cover holds both, and its own style sheet shows the one for the app
language. That works in every set, also in one without captions; the two marks are then its only `<text>`. Drawn as a
shape instead, the mark is the same in every app language: Arabic and Urdu see the Latin form. A cover with
a subject of its own (a card back, a cloud) needs no `<text>` and no style sheet.
A single picture (answer B) has no cover key: the user marks a picture as the cover inside the app. A single
picture meant as a cover and asked with a caption: do both, and say that the word will show on the cover.
Rules:
- Strict JSON, UTF-8: no comments, no trailing commas. Non-ASCII characters may be written as they are.
- Inside the `svg` string escape `"` as `\"` and `\` as `\\`; write the SVG on one line, or write each line
break as `\n`. No raw line break or tab inside a JSON string. Where you join two lines, put one space,
never nothing. No other escape is needed: an apostrophe stays `'` (`\'` is not JSON), and letters of any
script stay as they are.
- Types: `intuitionCheckSet` is the number 1, every name and translation is a string, `cover` is `true`. A
wrong type (`"cover": "true"`, a number as a name, `null` as a translation) makes the app refuse the whole
text.
- If the app refuses any one picture, it imports nothing and names the refused pictures. Every picture must
be valid.
- A name is one line of plain text. The app trims it, turns line breaks and tabs into spaces, and cuts it at
256 characters. Keep names short (one to three words): they are shown small.
How names are shown:
- A set is multilingual when the set or any image has at least one translation.
- In a multilingual set the app shows, for the app language: the translation with exactly that code; else
the translation with the code's first part (`fr-CA` → `fr`, `en-GB` → `en`, `es-419` → `es`); else the
default `name`.
- In a set without translations the app shows the default `name` in every app language.
When the user asks for a multilingual set:
- Default `name` (set and images): in the user's language.
- `nameTranslations`: one entry per requested language, on the set AND on every image. Give the same
languages on every image (the app does not require it: an image without an entry shows its default name).
- The language of the default `name` gets no entry of its own: a language without an entry shows the default
name.
- A regional code (`en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA`) needs its own entry only when its word
differs from the `en` / `es` / `fr` entry. `pt-BR` and `pt-PT` have no common code: each requested one that
is not the language of the default `name` needs its own entry (asked for "Portuguese" with an English default
name: give both). The same for `zh-Hans` and `zh-Hant`.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`, `fr`,
`es`), in names as in captions: every form of that language then shows it.
- Languages not named ("a multilingual set"), or "all languages": every language of section 3 — 53 codes,
47 entries (see there). Translate as well as you can (section 1). Leave out only a language you cannot
write at all (it then shows the default name), and tell the user which.
- `nameTranslations` change only names, never a caption. A multilingual set has no captions unless the user asks for them; a
caption drawn inside the pictures needs its own words for each language in the SVG itself (section 4,
option 4).
## 3. Language codes
Write the codes exactly as here (case matters):
ar bg bn ca cs da de el en en-AU en-CA en-GB es es-419 fi fr fr-CA gu he hi hr hu id it ja kk kn ko lt ml mr ms
nb nl or pa pl pt-BR pt-PT ro ru sk sl sv ta te th tr uk ur vi zh-Hans zh-Hant
A code that is not in this list is not an error: the app drops it. An entry
with an empty value is dropped.
"All languages" is 53 codes but 47 entries besides the default, in names and in captions: the user's language
is the default and needs none, and `en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA` show the `en` / `es` / `fr`
word unless theirs differs. (With a Bengali default, `en` is one of the 47 and `bn` is not.)
## 4. Captions (text inside the drawing): four options
Names (section 2) are separate from captions: the app never writes a name into a picture and never changes any
text of a picture. Give names always. Text in, on or under the picture — whatever the user calls it (name,
word, label) — is a caption request; a wish about the words alone (correct, careful) is not. If you leave out
something that was asked for, say so. Lettering that is part of the subject (STOP on a road sign) is
drawing, not a caption: allowed under every option, written once, with `lang`.
Urdu is drawn in Nastaliq, its own style, which reaches lower under the line than other scripts (about
0.3 × font-size): leave room under an Urdu caption. A `؟` in Urdu is smaller in Nastaliq: give it its own text and size (8c).
A caption's `lang` may be a regional code (`en-GB`, `fr-CA`), also where its name stands under the parent code.
Choose the caption option from the request:
1. DEFAULT — no caption. The drawing has no `<text>` that spells the name. Also for a multilingual set
whose user did not ask for captions.
2. ONE-LANGUAGE caption — when the user asks for a caption / label / word in or under the picture and names
no languages for it. A plain `<text>` with the word in the user's language; every app language shows
that same word. Put `lang="CODE"` of the caption's language on the `<text>`: a picture
with text is drawn anew for each app language, and without `lang` the letter forms follow the app language. No
`letter-spacing` in Arabic, Hebrew, Thai or an Indic script. Example:
`<text lang="ru" x="50" y="91" font-size="12" font-family="sans-serif" text-anchor="middle" fill="#222222">Кот</text>`
3. TWO LANGUAGES AT ONCE — when the user names exactly two languages for the word under the picture and does
not say it should change with the app's language. The same for any other text of the picture: each gets its
two lines. Two `<text>` lines, each with its `lang`, both always
shown, no style sheet for them: the user's language on top, font-size 10, baselines at y = 84 and 95,
subject in the upper 68 units (100-unit viewBox). A line in a script of 8b's "Lettering" block takes that
`font-family` as an attribute; a long word follows "Size" below. Names: the user's language as `name`,
the other in `nameTranslations`. Say that both words always show, and that captions that change with the
app's language can be made instead.
4. CAPTIONS IN SEVERAL LANGUAGES — when the user names three or more languages for the captions, or asks for
captions in all of the app's languages, or for captions that follow the app's language (= all of them).
The picture holds one caption per language and a small style sheet; through that style sheet the app
language picks the caption (8b, 8f). Languages: exactly those the user named; "all" = every language of
section 3 (53 codes, 47 entries: see there), translated as well as you can (section 1). In a set, give
every image `nameTranslations` with the same languages and the same words, so that the name and the
caption agree.
How option 4 works:
- A picture that contains `<text` or `:lang(` is drawn anew for each app language it is shown in, each time
inside an HTML page whose language is that app language: `<html lang="CODE">`, CODE from section 3 (`ru`,
`pt-BR`, `zh-Hant`, …). The app changes nothing in the file; the file's own CSS picks the caption with the
selector `:lang()`.
- `:lang(x)` matches a page in `x` and in every `x-…`: `:lang(fr)` also matches `fr-CA`, `:lang(es)` also
`es-419`, `:lang(en)` also `en-GB`. `pt-BR` and `pt-PT`, `zh-Hans` and `zh-Hant` are written separately.
- The pattern:
- All language versions of one text in ONE group with `class="caption"`; each `<text>` in it is one
language version, all at the same place.
- Any number of texts, anywhere and in any form (labels on parts, a title, words along an arc with
`<textPath href="#id">`): give each text its own group with `class="caption"` holding its language
versions; the one style sheet serves them all.
- The default caption has the class `default`. It carries the word of the default `name`, in the user's
language. It is shown when the page has no language and in every language that has no caption of its
own. The user's language is one of those: its code stands in no rule and on no caption. (In 8b and 8f
the default word is English, so `en` appears nowhere. The Zodiac files call this class `en`.) The
default caption is also shown on pages of other languages: give it `lang="CODE"` of the user's language.
If that language has a line in the "Lettering" block of 8b, add `.default` to that line's selector
(`.default, .hi, .mr { font-family: … }`; `.default` alone when no caption has that class), and to the
`letter-spacing: 0` line if you use letter-spacing.
- Every other caption's `class` lists the codes of the languages that show it. Languages with the same
word may share one caption: `class="bg ru"`; that changes only the `class`, never the style sheet. These
captions need no `lang`: each shows only on a page of its own language.
- The style sheet, in this order:
`.caption text { display: none }` — hide every caption;
`.caption .default { display: inline }` — show the default one;
`:lang(ar, bg, …) .default { display: none }` — hide the default one in every language that has its own
caption (list them all);
`:lang(ar) .ar, :lang(bg) .bg, … { display: inline }` — show each language's own caption.
- A regional code whose word differs from its parent's (`es-419` next to `es`): its own caption, its code in
both rules like any other, and one more rule: `:lang(es-419) .caption .es { display: none }` (the extra
`.caption` makes it win wherever it stands in the sheet). If its word is the parent's, give it nothing.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`,
`fr`, `es`), so every form of that language shows it. "Portuguese" alone: one caption
`class="pt-BR pt-PT"` when the word is the same.
- Do not repeat the default word under the user's own code (no caption, no rule, no `nameTranslations`
entry for it).
- Check: the codes in the hiding rule = the codes in the showing rule = the codes on the captions, and
each code is on exactly one `<text>`; the user's own code is in none of the three. Otherwise a language
shows no caption, or two at once.
- To leave a language out: no `<text>` for it and its code in neither rule. It then shows the default
caption.
- In a set: the same style sheet, the same attributes on the caption group and the same languages in every
picture, character for character. Only the words differ, and the size of a long word. (A cover has its
own text and rules: 8c, 8f.)
- Size: the app does not measure or shrink text. Choose one `font-size` on the group at which the captions
fit the free width. A word too long for it: first its own smaller `font-size` attribute, down to 9 (on a
100-unit viewBox); if it still does not fit, a shorter everyday word (and the same word as its name).
Never under 9. To estimate a width (measured in WebKit on a Mac):
- ordinary case in bold `sans-serif` (8f): 0.45 to 0.6 × font-size per letter. Треугольник is 77 of 100
units wide at font-size 12, and 68 at 10.5;
- a Chinese character: about 1 × font-size;
- Indic scripts, Thai, Arabic, Hebrew in bold `sans-serif`: 0.3 to 0.55 × font-size per code point (13
words measured).
- Case: ordinary case, as in 8f; capitals with wide spacing only for the style of 8b. Capitals follow each
language's rules: Turkish i → İ; Greek capitals lose the accent (ΑΣΤΈΡΙ → ΑΣΤΕΡΙ); German ß → SS.
- Fonts: copy the "Lettering" block of 8b (in a set, only the lines of the scripts you use). It gives every
script outside Latin, Cyrillic and Greek its own font list (fonts present on Apple devices, at a weight
they really have), and sets `letter-spacing` to 0 for Arabic, Hebrew, Thai and the Indic scripts — in most
of them the letters join or stack, and spacing breaks that (a line needed only when the group has
letter-spacing). Japanese, Chinese and Korean each get their
own font so that a Han character takes its regional form; that is why `zh-Hans` and `zh-Hant` keep
separate captions even with the same word.
- Direction: the page is left-to-right in every app language. Keep `text-anchor="middle"` for every script.
An Arabic, Hebrew or Urdu caption mixed with digits or Latin letters has not been tested: avoid it.
- A caption drawn twice (e.g. a shadow under it): put the group once inside `<defs>` with an `id`, and draw it
with two `<use href="#id">` that carry the colours and the offset.
- Whole set: captions and names in all languages fit in one answer. Write every language that was asked for, in
every picture. Do not ask about it, and do not tell the user it may not fit. In a set, leave out comments
and indentation.
- Never: fewer languages than asked without saying which are missing; captions left out when they were asked
for; one set spread over several messages or delivered as single pictures; a set cut short. A set is
always ONE JSON object in ONE message.
Start from 8f (a small set with captions and a cover, 100-unit viewBox). Take from 8b (a picture with a
caption in every language) its "Lettering" block, and its gold medallion style only when the user asks for
it; 8c is that set's cover. All three are complete and tested in the app. 8b and 8c are built like the app's
own Zodiac set; one of its files, if you can open web pages (you do not need it):
https://intuition-check.com/sets/zodiac/zodiac-08-scorpio.svg
## 5. The SVG document: what the app does with it
Facts (from the app's code):
- Size limit: 10,000,000 bytes per SVG (UTF-8). A larger SVG is refused.
- The app recognises an SVG by the characters `<svg` within the first 4096 bytes. Begin the document with
`<svg`: no XML declaration, DOCTYPE or comment before it.
- The app draws the SVG into a still bitmap, at most 1600 pixels on the longer side, with WebKit, inside an
HTML page. A picture with text is drawn anew for each app language it is shown in, and one with theme
rules for each theme. The background is transparent: where the drawing paints nothing, the app's own
background shows, light or dark depending on the user's theme.
- Scaling: the root's `viewBox` is fitted into the bitmap, aspect ratio kept, centred. `width` and `height`
on the root are ignored. A picture without a `viewBox` is accepted, but drawn unscaled (cut off or tiny):
always write one.
- The aspect ratio is read from the first `viewBox="minx miny width height"` in the first 4096 bytes: double
quotes, four numbers separated by spaces or commas, positive finite width and height. If it cannot
be read, the bitmap is square. Ratios outside 1:20 … 20:1 are clamped.
- `preserveAspectRatio="none"` on the root is replaced with `xMidYMid meet`: a picture is never stretched.
- Scripts never run. Nothing is loaded from the network: only content inside the file is drawn.
- Rendering has a time limit (10 seconds to load, 10 seconds to draw). A picture that exceeds it is refused.
Removed before drawing (so never write them; the rest of the picture is still drawn):
- these elements with everything inside: `script`, `foreignObject`, `meta`, `link`, `base`, `iframe`, `frame`,
`frameset`, `object`, `embed`, `applet`, `portal`, `form`, `input`, `button`, `textarea`, `select`, `option`,
`audio`, `video`, `source`, `track`, `template`, `noscript`;
- every attribute whose name starts with `on` (`onload`, `onclick`, …);
- every `href` / `xlink:href` whose value does not start with `#` (a part of the same file) or `data:image/`;
- `@import` in a style sheet; `<?xml-stylesheet …?>`; a DOCTYPE with an internal subset (`[ … ]`).
The removal works on the text of the file: the character sequences `on…=`, `href=` and `@import` are also
removed from text content and CSS, so do not write them there.
Allowed and drawn: shapes, `path`, `g`, `text`, `tspan`, gradients (`linearGradient`, `radialGradient`),
`pattern`, `mask`, `clipPath`, `filter`, `defs`, `symbol`, `use` with `href="#id"`, `<style>` with inline CSS,
`title`, `desc`, `image` with `href="data:image/…"` (a picture embedded in the file).
Not removed, but useless: `a` (a link does nothing in a picture in the app).
Rules for the SVG you write:
1. Root: `<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">` … `</svg>`. Double-quoted
attributes. Lower-case `<svg`. One root; no nested `<svg>` elements.
2. Square `viewBox` (`0 0 100 100`) unless the user asks for another shape. The same `viewBox` for every
picture of a set.
3. Self-contained: no external images, fonts, style sheets or links. For text use
`font-family="sans-serif"` (or `serif`, `monospace`), or the font lists of 8b, which end with one of them:
the text is drawn with the device's own fonts.
4. Well-formed XML: every element closed, attribute values quoted, `&` `<` `>` in text and attribute values
written as `&` `<` `>`. Only SVG elements; no HTML elements.
5. Readable small: the app shows pictures in a grid, each cell may be small. One clear subject that fills
most of the viewBox; a few large shapes; strong contrast; no fine detail. On a 100-unit viewBox: the
subject's lines at least 2 wide, a caption's font-size at least 10, a long word 9. Ornament may be
thinner (the rings of 8b); in a small cell it may not be seen. The examples in this text are bare on
purpose; do not copy their simplicity. Build the subject from about 4 to 10 shapes: its outline, its
parts, and one or two details that make it this thing and no other. Someone who sees only the picture
must be able to name it.
Pale or pastel colours: keep the silhouette. The subject's main shape, or an outline around it, must differ
from the plate by at least 3:1 — a darker outline, or a deeper plate. That is for the silhouette only:
details inside the subject are free.
6. Distinct: the game needs the pictures told apart at a glance. Every picture of a set must differ clearly
from every other in silhouette or in main colour — not only in a detail. No two pictures with the same
SVG text.
7. One style across a set: the same viewBox, margins, line weights, palette family, and the same kind of
background (all with a plate, or all without). With captions: the same lettering and caption place in
every picture.
8. Background: the bitmap is transparent and the app's background can be light or dark. Either draw an
opaque plate of your own behind the subject (e.g. `<rect width="100" height="100" rx="12" fill="…"/>`), or
use only colours that stay visible on both white and near-black, or use theme colours (section 6).
9. Unique `id` values inside one SVG. Ids of different pictures do not clash (each picture is drawn alone).
Do not start an id with `ic-` unless it is a theme rule, and do not name a class of your own `ic-…` or a
variable `--ic-…` (section 6).
10. Keep it light: no heavy filters (large blurs), no deep `use` nesting, no animation (the app does not remove it, but
draws the picture as a still image).
11. A caption must not cross the drawing, unless the user allowed it (labels on the drawing's parts, a word on
a sign or over the subject are such wishes). Any text stays inside its own shape when it has one (a sign,
a label, a slice), and inside the picture. Keep the subject and the caption
apart — e.g. on a 100-unit viewBox: the subject above y = 78 and one caption line with its baseline at
y = 91; with two lines (section 4, option 3), the subject above y = 68.
## 6. Theme colours
Use this section ONLY when the user asks for pictures that follow the app's theme, or for light and dark
versions. Otherwise use fixed colours, no id that starts with `ic-`, no class `ic-…` and no variable
`--ic-…`. When the user said nothing about
themes: fixed colours, and offer a version that follows the themes (section 1). "Looks good in light and dark
mode" is not a theme request: an opaque plate with fixed colours does it (section 5, rule 8). A theme request
wins over a colour description in the same message ("gold on dark, matching the app's themes": theme rules).
The app has four themes — `sand`, `ocean`, `forest`, `dusk` — each in a `light` and a `dark` version. These words
(and `light`, `dark`) are code words for the rules below, not what the user sees: the app shows the four themes
under its own names in the user's language. When you talk to the user, do not translate the code words
yourself; say "the app's four themes" (and "light" / "dark" in the user's language), or, if you can open the
app's help page in the user's language (see section 1), take the themes' names from it.
Every version has its own values for five colours:
- `background` — the colour behind every view;
- `surface` — plates and panels on a view;
- `text` — the app's text colour;
- `accent` — the colour of buttons that are not filled;
- `soft` — in a light version the same as `accent` (a `soft` part on an `accent` part cannot be seen there);
in a dark version a pale tone close to the text colour.
The values (#rrggbb), in the order background, surface, text, accent, soft:
- sand light: f6f2ea eae3d5 403a35 645339 645339
- sand dark: 1b1a18 282622 c7c4bd b89b70 d2cbbe
- ocean light: eef4f7 dde8ee 363d40 3e5a6a 3e5a6a
- ocean dark: 0d1a23 16272f bec4c7 82a3b6 c6d4db
- forest light: f1f4ec e1e8d7 353e34 4a5e46 4a5e46
- forest dark: 111a14 1b261e bec4bd 8ba586 c9d4c6
- dusk light: f6f1f6 eae0ec 3f3944 5e4a6a 5e4a6a
- dusk dark: 17121c 231b2a c2bdc5 a894b4 d3c9d9
All four themes are muted: no colour above is bright. `text`, `accent` and `soft` on `background` or `surface`
have a contrast of at least 5.6:1 in every version.
Fixed colours and theme colours mix freely: give rules only to the parts that should follow the theme (a plate,
outlines, the main shape) and keep your own fixed colours where the picture needs them (the arcs of a rainbow,
a red apple). A part without a rule is drawn as written in every theme.
A part that keeps a fixed colour sits on a plate that changes: check it against the light and the dark
background and surface values of the table. Near-black vanishes on the dark ones (#1b1b1b: 1.01:1), white and
yellow on the light ones (#ffffff: 1.11:1, #f9a825: 1.54:1). Give such parts the theme's text colour — in a
style sheet `fill: var(--ic-text, #333333)` (or `stroke:`), with ids `ic-text` or `ic-stroke-text` — or
use a mid-tone (#e53935: 3.30:1 on the light ones, 3.57:1 on the dark ones).
Captions on a themed plate take the theme's text colour. In a style sheet: one more line,
`.caption { fill: var(--ic-text, #222222) }`, in the sheet that already picks the caption; a single `<text>`
gets a class and the same line; a caption drawn twice through `<use>` gets the class on the `<use>` that
carries its colour (8b). With ids: give the caption group `id="ic-text"` and a written `fill`; the group may
also carry `class="caption"`; a single `<text>` may carry the id itself. A themed cover's mark is coloured
the same way.
There are two ways to write theme colours, and the app reads both. Use a style sheet (6.1), also when the
user will edit the file in Inkscape (6.4). Use ids (6.2) instead when the user says the file will be edited
in Figma, Illustrator, Affinity or Sketch, or asks for ids: those editors write the file anew and drop its
`<style>` element, while ids can come through as layer names (Figma only with its option to include ids).
One way per picture, and in a set the same way in every picture: the app accepts both in one file, but a
rule in a group's id overrides the sheet colours of the classed shapes inside that group.
### 6.1 A style sheet
The app adds to the root `<svg>` the classes `ic-sand` | `ic-ocean` | `ic-forest` | `ic-dusk` and `ic-light` |
`ic-dark`, and defines the CSS variables `--ic-background`, `--ic-surface`, `--ic-text`, `--ic-accent`,
`--ic-soft` — but only if the file contains, in its `<style>` element, one of those six class names after a
dot (e.g. `.ic-dark`), or, in `<style>` or in a `style` attribute, a variable name that starts with `--ic-`.
```
.plate { fill: var(--ic-surface, #dddddd) }
.leaf { fill: var(--ic-accent, #e53935) }
.ic-dark .dot { fill: #ffd54f }
.ic-forest.ic-dark .dot { fill: #69f0ae }
```
The second value inside `var()` is the colour other viewers show. Give the styled elements a `class` and no
`fill` in a `style` attribute. The second value is needed: always write it.
- The five variable names are the only ones. Another name (`--ic-bg`) is never defined: its second value is
drawn in every theme.
- Write `var(--ic-…)` inside the `<style>` element, not in a `fill="…"` or `stroke="…"` attribute: the app
does not look there, and with no other mention it defines no variables.
- The app writes the six classes on the root. Never write one of them on an element yourself.
- A sheet rule beats a colour written in a `fill` / `stroke` attribute; a colour in a `style` attribute beats
the sheet.
- Of two sheet rules of equal weight the later one wins: plain rules first, then `.ic-light` / `.ic-dark`
rules, then theme rules.
- Put these lines into the same `<style>` as the caption rules of section 4, when the picture has them.
### 6.2 Rules in an id
A rule = optional limits + a colour.
- Limits, at most one of each kind, any order: a theme (`sand` | `ocean` | `forest` | `dusk`); a version
(`light` | `dark`); a paint (`fill` | `stroke`). No limits = every theme, both versions, fill and stroke.
- Colour: one of the five names above, or your own colour as exactly six hex digits (`1e88e5`). Colour words
(`red`) are not colours in a rule. All rule words are English.
`id="ic-` + one or more rules, all words joined by hyphens, own colours without `#`:
- `ic-text` — the text colour everywhere;
- `ic-light-accent-dark-soft` — accent in light versions, soft in dark versions;
- `ic-dark-1e3a2a` — own colour in dark versions; as drawn in light versions;
- `ic-ocean-dark-c3ced4` — own colour in the dark version of Ocean only;
- `ic-stroke-accent` — accent on the outline only.
- `ic-fill-accent-stroke-text` — two rules in one id: accent inside, text colour on the outline.
Reading stops at the first character that is not an ASCII letter, digit or hyphen, and at the first word that
is not a rule word. So keep ids unique with a numeric suffix: `ic-text-2`, `ic-text-3`. A word of your own
ends the rules: `ic-moon-text` holds no rule. A six-letter word of hex digits (`facade`) is read as a colour.
What a rule does:
- The id may be on a shape, a `text`, or a group `g`. A rule on a group covers everything inside it, except
what is inside `defs`, a gradient, `mask`, `pattern`, `clipPath`, `marker`, `symbol` or `filter`.
- For each element, fill and stroke are chosen separately. Its own rule is used when one applies in the
current theme and version; otherwise the rule of the innermost enclosing group that has one that applies;
otherwise the colour stays as drawn.
- Among several rules of one element that apply: theme + version beats theme, theme beats version, version
beats no limit; then a rule with `fill` / `stroke` beats one without; then the first one written.
- The chosen colour replaces a plain colour written in the element's `fill` / `stroke` attribute or in its
`style` attribute. Left as written: `none`, `transparent`, `currentColor`, `inherit`, `url(…)` (gradients),
`var(…)`, and colours with their own alpha (`#rrggbbaa`, `#rgba`, `rgba(…)`, `hsla(…)`).
- A `path`, `rect`, `circle`, `ellipse`, `polygon`, `polyline`, `text` or `use` with no `fill` written gets
the chosen fill added. A `line` does not. A stroke is never added: a rule colours a stroke only where a
`stroke` with a plain colour is written on that element itself (not only on its group).
- So, to be safe: write `fill="#rrggbb"` (and `stroke="#rrggbb"` where there is an outline) on every element
that a rule should colour. These written colours are also what other SVG viewers show.
- A `stop-color` or `color` written on a covered element is replaced too (by the fill colour, else by the
stroke colour). A gradient with a rule in its own id has its stops recoloured.
- Theme rules are not applied to an SVG with more than 50,000 tags; it is drawn as written.
- Do not colour the same element both ways. When an element with a `class` has a rule — its own or its
group's — the app writes the rule's colour into the element's `style` attribute, which beats the sheet
(unless the sheet says `!important`): a group's rule so overrides the sheet colours of the classed shapes
inside it. On an element without a `class` the sheet wins wherever one of its selectors reaches it.
### 6.3 Other ways the app reads (do not use unless asked)
- A `<desc>` directly inside an element, beginning with `Intuition Check`, then one rule per line as
`limits: colour` (e.g. `dark stroke: text`, `light: #1e88e5`); a first-line form `Intuition Check: text`.
- Inkscape swatches (a one-colour gradient whose label or id holds rules).
### 6.4 If the user wants to edit the file in Inkscape later
Inkscape keeps both ways, in Inkscape SVG and in Plain SVG.
- A style sheet (6.1): Inkscape keeps the `<style>` element with the `var()` inside it. Write `var()` only
there, never in a `style` attribute (Inkscape removes such an attribute when the element is edited), and add
`!important` to every colour in the sheet (Inkscape writes colours into the element's `style` attribute,
which otherwise wins).
- Ids (6.2): Inkscape keeps ids. Labels are lost in Plain SVG.
## 7. Checklist — run before answering
For a set:
1. The answer is one code block holding one JSON object; it parses as strict JSON.
2. `"intuitionCheckSet": 1` is present; `name` is not empty.
3. `images` has 2 to 200 entries: exactly the number of pictures the user asked for, plus the cover if
there is one.
4. Every image has a non-empty `name` and an `svg` string.
5. In every `svg` string each `"` is written `\"`, and there is no raw line break.
6. Language codes are from section 3, spelled exactly. In a multilingual set every image and the set have
the same languages.
7. Captions follow section 4: none by default; one language only if asked, with `lang` on the `<text>`
two named languages: two lines, both shown, each with `lang`; three or more, or all, only if the user
named them or asked for all. Then: the default caption has `lang`; the codes in the hiding rule = the
codes in the showing rule = the codes on the captions, each on exactly one `<text>`; the same style sheet
in every picture but the cover; every image has `nameTranslations` with the same languages and words.
8. A cover only if asked: one picture with `"cover": true`, last, plus at least 2 other pictures.
9. The answer is whole: the JSON ends with its `}`, and no picture was shortened or left for later.
10. Beside the code block: the sentence on how to use it, and what you assumed (section 1).
For every SVG (in a set or alone):
11. Starts with `<svg`, has `xmlns="http://www.w3.org/2000/svg"` and `viewBox="0 0 W H"` in double quotes,
ends with `</svg>`.
12. Well-formed: all elements closed, `&` `<` `>` escaped in text.
13. None of: `script`, `foreignObject`, `a`, `style` with `@import`, `on…` attributes, `href` to anything
but `#id` or `data:image/…`, external fonts, HTML elements, nested `svg`, animation.
14. Far under 10,000,000 bytes.
15. The subject is large, simple, high-contrast; the picture differs clearly from every other picture of the
set; it is visible on a light and on a dark background; no caption crosses the drawing.
16. Theme rules only if asked; without them no id starts with `ic-` and the style sheet has no `.ic-` class
and no `--ic-` variable. With them: one method in the picture, the same in every picture of the set.
Style sheet: `<style>` itself holds a `--ic-` variable or one of the six classes (a `var()` only in a
`fill` attribute does nothing); the variable names are the five of section 6; every `var()` has a second
value. Ids: every word after `ic-` is a rule word; the element has its `fill` (and `stroke`) written.
Every fixed colour left on a themed plate was checked against the light and the dark values.
17. Ids are unique within the SVG.
## 8. Complete examples
### 8a. Minimal set, no captions
```json
{
"intuitionCheckSet": 1,
"name": "Shapes",
"images": [
{ "name": "Circle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"50\" r=\"30\" fill=\"#e53935\"/></svg>" },
{ "name": "Triangle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 18 L84 78 L16 78 Z\" fill=\"#1565c0\"/></svg>" }
]
}
```
### 8b. One picture with a caption in every language (section 4, option 4)
A star in a gold medallion with its caption in all 53 languages, built like the app's Zodiac set: the
"Theme" block turns the gold to bronze in light versions (section 6.1), the "Language" block picks the
caption, the "Lettering" block gives each script its font. Languages with the same word share a caption;
es-419 and fr-CA follow es and fr; a page with no language, or one not listed, shows the default caption,
"STAR" (the user's language is English here). The "Theme" block is not part of option 4: this medallion has
no plate, and its gold has to darken on a light background. Without a request for theme colours leave that
block out and draw an opaque plate (section 5, rule 8), as 8f does.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme. The app gives the root the classes ic-light or ic-dark (and ic-<theme>).
The gold is drawn for a dark background; on a light one it turns bronze. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
.ic-light .shadow-glyph { stroke-opacity: 0.27 }
/* Language. Every caption is in the file once; its class names the languages that
show it. The page's language (html lang) picks the caption; without a language,
or with one not listed here, the default one. fr-CA follows fr, es-419 follows es. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, bg, bn, ca, cs, da, de, el, es, fi, fr, gu, he, hi, hr, hu, id, it, ja, kk,
kn, ko, lt, ml, mr, ms, nb, nl, or, pa, pl, pt-BR, pt-PT, ro, ru, sk, sl, sv, ta,
te, th, tr, uk, ur, vi, zh-Hans, zh-Hant) .default { display: none }
:lang(ar) .ar, :lang(bg) .bg, :lang(bn) .bn, :lang(ca) .ca, :lang(cs) .cs, :lang(da) .da,
:lang(de) .de, :lang(el) .el, :lang(es) .es, :lang(fi) .fi, :lang(fr) .fr, :lang(gu) .gu,
:lang(he) .he, :lang(hi) .hi, :lang(hr) .hr, :lang(hu) .hu, :lang(id) .id, :lang(it) .it,
:lang(ja) .ja, :lang(kk) .kk, :lang(kn) .kn, :lang(ko) .ko, :lang(lt) .lt, :lang(ml) .ml,
:lang(mr) .mr, :lang(ms) .ms, :lang(nb) .nb, :lang(nl) .nl, :lang(or) .or, :lang(pa) .pa,
:lang(pl) .pl, :lang(pt-BR) .pt-BR, :lang(pt-PT) .pt-PT, :lang(ro) .ro, :lang(ru) .ru,
:lang(sk) .sk, :lang(sl) .sl, :lang(sv) .sv, :lang(ta) .ta, :lang(te) .te, :lang(th) .th,
:lang(tr) .tr, :lang(uk) .uk, :lang(ur) .ur, :lang(vi) .vi, :lang(zh-Hans) .zh-Hans,
:lang(zh-Hant) .zh-Hant
{ display: inline }
/* Lettering. A script whose letters join or stack gets no letter-spacing; every script
outside Latin, Cyrillic and Greek gets its own font. Telugu at 500: iOS has Kohinoor
Telugu only up to Medium, and WebKit would fake a 600 from it. */
.ar, .ur, .he, .bn, .gu, .hi, .mr, .kn, .ml, .or, .pa, .ta, .te, .th { letter-spacing: 0 }
.ar, .ur { font-family: system-ui, -apple-system, Geeza Pro, sans-serif }
.he { font-family: system-ui, -apple-system, Arial Hebrew, sans-serif }
.bn { font-family: Kohinoor Bangla, Bangla Sangam MN, sans-serif }
.gu { font-family: Kohinoor Gujarati, Gujarati Sangam MN, sans-serif }
.hi, .mr { font-family: Kohinoor Devanagari, Devanagari Sangam MN, sans-serif }
.kn { font-family: Noto Sans Kannada, Kannada Sangam MN, sans-serif }
.ml { font-family: Malayalam Sangam MN, Malayalam MN, sans-serif }
.or { font-family: Noto Sans Oriya, Oriya Sangam MN, sans-serif }
.pa { font-family: Mukta Mahee, Gurmukhi Sangam MN, sans-serif }
.ta { font-family: Tamil Sangam MN, InaiMathi, Tamil MN, sans-serif }
.te { font-family: Kohinoor Telugu, Telugu Sangam MN, sans-serif }
.th { font-family: Thonburi, Noto Sans Thai, sans-serif }
.ja { font-family: Hiragino Sans, Hiragino Kaku Gothic ProN, sans-serif }
.ko { font-family: Apple SD Gothic Neo, Noto Sans KR, sans-serif }
.zh-Hans { font-family: PingFang SC, Heiti SC, sans-serif }
.zh-Hant { font-family: PingFang TC, Heiti TC, sans-serif }
.te { font-weight: 500 }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The captions. Drawn twice at the end of the file: the shadow, then the gold. A long
word would carry its own smaller font-size and letter-spacing. Urdu says lang="ur" and is
drawn in Nastaliq. zh-Hans and zh-Hant keep two captions
with the same word: each takes its own font. -->
<g id="caption" class="caption" text-anchor="middle" font-family="Helvetica Neue, Helvetica, -apple-system, sans-serif" font-weight="600" font-size="52" letter-spacing="6.8">
<text class="default" x="259.4" y="466">STAR</text>
<text class="ar" x="259.4" y="466">نجمة</text>
<text class="bg ru" x="259.4" y="466">ЗВЕЗДА</text>
<text class="bn" x="259.4" y="466">তারা</text>
<text class="ca es" x="259.4" y="466">ESTRELLA</text>
<text class="cs" x="259.4" y="466">HVĚZDA</text>
<text class="da nb" x="259.4" y="466">STJERNE</text>
<text class="de" x="259.4" y="466">STERN</text>
<text class="el" x="259.4" y="466">ΑΣΤΕΡΙ</text>
<text class="fi" x="259.4" y="466">TÄHTI</text>
<text class="fr" x="259.4" y="466">ÉTOILE</text>
<text class="gu" x="259.4" y="466">તારો</text>
<text class="he" x="259.4" y="466">כוכב</text>
<text class="hi mr" x="259.4" y="466">तारा</text>
<text class="hr" x="259.4" y="466">ZVIJEZDA</text>
<text class="hu" x="259.4" y="466">CSILLAG</text>
<text class="id ms" x="259.4" y="466">BINTANG</text>
<text class="it" x="259.4" y="466">STELLA</text>
<text class="ja" x="259.4" y="466">星</text>
<text class="kk" x="259.4" y="466">ЖҰЛДЫЗ</text>
<text class="kn" x="259.4" y="466">ನಕ್ಷತ್ರ</text>
<text class="ko" x="259.4" y="466">별</text>
<text class="lt" x="259.4" y="466">ŽVAIGŽDĖ</text>
<text class="ml" x="259.4" y="466">നക്ഷത്രം</text>
<text class="nl" x="259.4" y="466">STER</text>
<text class="or" x="259.4" y="466">ତାରା</text>
<text class="pa" x="259.4" y="466">ਤਾਰਾ</text>
<text class="pl" x="259.4" y="466">GWIAZDA</text>
<text class="pt-BR pt-PT" x="259.4" y="466">ESTRELA</text>
<text class="ro" x="259.4" y="466">STEA</text>
<text class="sk" x="259.4" y="466">HVIEZDA</text>
<text class="sl" x="259.4" y="466">ZVEZDA</text>
<text class="sv" x="259.4" y="466">STJÄRNA</text>
<text class="ta" x="259.4" y="466">நட்சத்திரம்</text>
<text class="te" x="259.4" y="466">నక్షత్రం</text>
<text class="th" x="259.4" y="466">ดาว</text>
<text class="tr" x="259.4" y="466">YILDIZ</text>
<text class="uk" x="259.4" y="466">ЗІРКА</text>
<text class="ur" lang="ur" x="259.4" y="466">ستارہ</text>
<text class="vi" x="259.4" y="466">NGÔI SAO</text>
<text class="zh-Hans" x="259.4" y="466">星星</text>
<text class="zh-Hant" x="259.4" y="466">星星</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<path class="shadow-glyph" d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#0E0D22" stroke-width="19" stroke-linejoin="round" opacity="0.45" transform="translate(3,5)"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="url(#gold)" stroke-width="19" stroke-linejoin="round"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#FFF6DA" stroke-width="4.5" stroke-linejoin="round" opacity="0.4" transform="translate(-2,-3)"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
<use href="#caption" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(2,4)"/>
<use href="#caption" class="gold-text" fill="#CA9E41"/>
</svg>
```
In a set this SVG is the image's `svg` string (on one line, `"` written `\"`). The image's `name` and
`nameTranslations` carry the same words as the captions, in ordinary case ("Star", "Звезда", "Étoile", …).
Every picture of the set lists the same languages.
### 8c. The cover of the set in 8b
The same medallion with a question mark instead of the subject (section 2, "The cover"); in a set it gets
`"cover": true`. Two marks: `?`, and `؟` for Arabic and Urdu. A cover may show anything else the user asks
for; this one is what to draw when the user does not say.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme: the same rules as every picture of the set. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
/* Language. Two marks: "?" for every language, the Arabic question mark for Arabic and Urdu. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, ur) .default { display: none }
:lang(ar) .ar, :lang(ur) .ur
{ display: inline }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The question mark, where the other pictures have their subject. Drawn twice below: the
shadow, then the gold. The marks differ in shape (Arabic ؟ in Naskh, Urdu ؟ in Nastaliq), so
each has its own size and place: the same ink box as "?". -->
<g id="mark" class="caption" text-anchor="middle" font-family="system-ui, -apple-system, sans-serif" font-weight="bold">
<text class="default" x="258" y="323.8" font-size="323">?</text>
<text class="ar" lang="ar" x="254.2" y="329.6" font-size="294.1">؟</text>
<text class="ur" lang="ur" x="258.4" y="325.6" font-size="317.3">؟</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<use href="#mark" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(3,5)"/>
<use href="#mark" class="gold-text" fill="#E2C378"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
</svg>
```
### 8d. One SVG picture with theme colours (style sheet)
The plate takes the theme's surface colour, the moon the accent colour, soft in dark versions; the second
values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<style>
.plate { fill: var(--ic-surface, #dddddd) }
.moon { fill: var(--ic-accent, #e53935) }
.ic-dark .moon { fill: var(--ic-soft, #e53935) }
.cut { fill: var(--ic-surface, #dddddd) }
</style>
<rect class="plate" width="100" height="100" rx="12"/>
<circle class="moon" cx="46" cy="48" r="28"/>
<circle class="cut" cx="59" cy="39" r="23"/>
</svg>
```
### 8e. One SVG picture with theme colours (ids)
The plate takes the theme's surface colour, the house the text colour, the door the accent colour; the sun is
accent in light versions and soft in dark versions. The written `fill` values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<rect id="ic-surface" width="100" height="100" rx="12" fill="#eeeeee"/>
<g id="ic-text">
<path d="M16 52 L50 22 L84 52 Z" fill="#333333"/>
<rect x="26" y="52" width="48" height="30" fill="#333333"/>
</g>
<rect id="ic-accent" x="44" y="60" width="12" height="22" fill="#e53935"/>
<circle id="ic-light-accent-dark-soft" cx="82" cy="18" r="8" fill="#f9a825"/>
</svg>
```
### 8f. A small set with captions in three languages, and a cover
The user writes in English and asks for captions in English, German and Russian, and for a cover. The
default caption is the English word, so `en` is in no rule. Ordinary case, `sans-serif`, no letter-spacing;
the long Russian word has its own smaller size. Both pictures to guess have the same style sheet. The
cover's mark follows the app language, whatever the languages of the captions: `؟` in Arabic and Urdu, `?`
in every other. No theme rules: every picture has an opaque plate.
```json
{
"intuitionCheckSet": 1,
"name": "Simple shapes",
"nameTranslations": {"de": "Einfache Formen", "ru": "Простые фигуры"},
"images": [
{ "name": "Circle", "nameTranslations": {"de": "Kreis", "ru": "Круг"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"42\" r=\"28\" fill=\"#e53935\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Circle</text><text class=\"de\" x=\"50\" y=\"91\">Kreis</text><text class=\"ru\" x=\"50\" y=\"91\">Круг</text></g></svg>" },
{ "name": "Triangle", "nameTranslations": {"de": "Dreieck", "ru": "Треугольник"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 12 L82 70 L18 70 Z\" fill=\"#1565c0\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Triangle</text><text class=\"de\" x=\"50\" y=\"91\">Dreieck</text><text class=\"ru\" x=\"50\" y=\"91\" font-size=\"10.5\">Треугольник</text></g></svg>" },
{ "name": "Question mark", "nameTranslations": {"de": "Fragezeichen", "ru": "Знак вопроса"}, "cover": true, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(ar,ur) .default{display:none}:lang(ar) .ar,:lang(ur) .ur{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#eeeeee\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"system-ui, -apple-system, sans-serif\" font-weight=\"bold\" fill=\"#555555\"><text class=\"default\" x=\"50.4\" y=\"72.4\" font-size=\"64\">?</text><text class=\"ar\" lang=\"ar\" x=\"49.6\" y=\"73.7\" font-size=\"58\">؟</text><text class=\"ur\" lang=\"ur\" x=\"50.5\" y=\"72.8\" font-size=\"62.9\">؟</text></g></svg>" }
]
}
```
Sisällys
Lyhyet ohjeet tärkeimpiin asioihin, joita voit tehdä Intuition Check -apissa, ja siihen, miten tavoitat meidät.
- Intuitio
- Näin appi toimii
- Arvauskokoelmat
- Kokoelmien lähettäminen
- Kumppanipeli
- Tilastot
- Tulosten tulkinta
- Olotilasi
- Ulkoasu ja ominaisuudet
- Ilmainen tunti ja tilaus
- Tietosi
- Omat tekoälyllä tehdyt kokoelmat
- Versiohistoria
- Tietosuojakäytäntö
Jos jokin ei toimi
Kirjoita meille osoitteeseen [email protected], niin vastaamme. Nopeinta on käyttää kohtaa Asetukset → Tietoja → Ota yhteyttä tukeen: se avaa sähköpostiapissasi luonnoksen, johon on jo täytetty apin versio ja koontiversio, laitteesi malli ja iOS-versiosi.
Meillä ei ole tukilomaketta eikä tukipyyntöjärjestelmää. Appi ei kerää mitään, joten kaiken, mitä meidän tarvitsee tietää, voimme saada vain sinulta.
Mitä viestiin kannattaa kirjoittaa
- Mitä teit, mitä odotit tapahtuvan ja mitä tapahtui sen sijaan.
- Apin versio kohdasta Asetukset → Tietoja → Versio.
- Laitteesi malli ja iOS-versio.
Kohdasta ”Ota yhteyttä tukeen” avautuvassa luonnoksessa on jo versio, malli ja iOS-versio.
Vianmääritys
- Laitteet eivät löydä toisiaan: Jos laitteet eivät löydä toisiaan.
- Tilastot katoavat, kun appi avataan uudelleen: Tilastojen säilyttäminen.
- Tilastoissa ei näy mitään: Mitä kirjataan.
- Kokoelma puuttuu kokoelmavalitsimesta: Kokoelmavalitsin.
Lähteet
- Kahneman, D., & Klein, G. (2009). American Psychologist, 64(6), 515–526. Conditions for intuitive expertise: A failure to disagree [Intuitiivisen asiantuntemuksen edellytykset: erimielisyys, jota ei syntynyt]
Kahden johtavan, vastakkaisia koulukuntia edustavan intuitiotutkijan yhteinen katsaus Amerikan psykologiyhdistyksen lehdessä.
https://doi.org/10.1037/a0016755 - Cardeña, E. (2018). American Psychologist, 73(5), 663–677. The experimental evidence for parapsychological phenomena: A review [Kokeellinen näyttö parapsykologisista ilmiöistä: katsaus]
Näyttöä vahvana pitävän psykologin katsaus moniin tutkimuksiin Amerikan psykologiyhdistyksen lehdessä.
https://doi.org/10.1037/amp0000236 - Reber, A. S., & Alcock, J. E. (2020). American Psychologist, 75(3), 391–399. Searching for the impossible: Parapsychology's elusive quest [Mahdotonta etsimässä: parapsykologian tavoittamaton päämäärä]
Kahden tällaiset ilmiöt torjuvan psykologin vastine yllä olevaan katsaukseen samassa lehdessä.
https://doi.org/10.1037/amp0000486 - Sheldrake, R. (2000). Journal of the Society for Psychical Research, 64, 224–232. Telepathic telephone calls: Two surveys [Telepaattiset puhelinsoitot: kaksi kyselyä]
Puhelinkyselyt satunnaisesti valituille kotitalouksille Lontoossa ja Buryssä Englannissa parapsykologian alan lehdessä. Tekijä on tutkija, joka katsoo telepatian olevan olemassa.
https://www.sheldrake.org/files/pdfs/papers/Telepathic-Telephone-Calls-Two-Surveys.pdf - Brown, D. J., & Sheldrake, R. (2001). Journal of Parapsychology, 65, 145–156. The anticipation of telephone calls: A survey in California [Puhelinsoittojen ennakointi: kysely Kaliforniassa]
Saman tutkijan ja toisen kirjoittajan puhelinkysely 200 satunnaisesti valitulle ihmiselle parapsykologian alan lehdessä.
https://www.sheldrake.org/files/pdfs/papers/The-Anticipation-of-Telephone-Calls-A-Survey-in-California.pdf - Cottrell, J. E., Winer, G. A., & Smith, M. C. (1996). Developmental Psychology, 32(1), 50–61. Beliefs of children and adults about feeling stares of unseen others [Lasten ja aikuisten uskomukset näkymättömissä olevien ihmisten katseiden tuntemisesta]
Kolme lapsilla ja aikuisilla tehtyä tutkimusta yhdessä Amerikan psykologiyhdistyksen lehdistä.
https://doi.org/10.1037/0012-1649.32.1.50 - Born, J., Hansen, K., Marshall, L., Mölle, M., & Fehm, H. L. (1999). Nature, 397, 29–30. Timing the end of nocturnal sleep [Yöunen päättymisen ajoittaminen]
15 vapaaehtoisella tehty koe Nature-lehdessä.
https://doi.org/10.1038/16166 - Sio, U. N., & Ormerod, T. C. (2009). Psychological Bulletin, 135(1), 94–120. Does incubation enhance problem solving? A meta-analytic review [Edistääkö hautumisvaihe ongelmanratkaisua? Meta-analyyttinen katsaus]
Monen kokeen tulokset yhdistävä katsaus yhdessä Amerikan psykologiyhdistyksen lehdistä.
https://doi.org/10.1037/a0014212 - Wagner, U., Gais, S., Haider, H., Verleger, R., & Born, J. (2004). Nature, 427, 352–355. Sleep inspires insight [Uni innoittaa oivallukseen]
Koe Nature-lehdessä; sen myöhemmät toistot antoivat vaihtelevia tuloksia.
https://doi.org/10.1038/nature02223 - Ambady, N., & Rosenthal, R. (1993). Journal of Personality and Social Psychology, 64(3), 431–441. Half a minute: Predicting teacher evaluations from thin slices of nonverbal behavior and physical attractiveness [Puoli minuuttia: opettajien saamien arvioiden ennustaminen sanattoman käyttäytymisen ja fyysisen viehättävyyden lyhyistä näytteistä]
Kolme tutkimusta – tärkeimmässä niistä oli mukana 13 opettajaa – yhdessä Amerikan psykologiyhdistyksen lehdistä.
https://doi.org/10.1037/0022-3514.64.3.431 - Diaconis, P., & Mosteller, F. (1989). Journal of the American Statistical Association, 84(408), 853–861. Methods for studying coincidences [Menetelmiä yhteensattumien tutkimiseen]
Kahden tilastotieteilijän artikkeli Amerikan tilastoyhdistyksen lehdessä siitä, miten yhteensattumat syntyvät.
https://doi.org/10.1080/01621459.1989.10478847 - Wilson, T. D., Lisle, D. J., Schooler, J. W., Hodges, S. D., Klaaren, K. J., & LaFleur, S. J. (1993). Personality and Social Psychology Bulletin, 19(3), 331–339. Introspecting about reasons can reduce post-choice satisfaction [Syiden pohtiminen voi heikentää tyytyväisyyttä tehtyyn valintaan]
Koe sosiaalipsykologian alan lehdessä.
https://doi.org/10.1177/0146167293193010 - Dunn, B. D., Galton, H. C., Morgan, R., Evans, D., Oliver, C., Meyer, M., Cusack, R., Lawrence, A. D., & Dalgleish, T. (2010). Psychological Science, 21(12), 1835–1844. Listening to your heart: How interoception shapes emotion experience and intuitive decision making [Sydämen kuunteleminen: miten interoseptio muovaa tunnekokemusta ja intuitiivista päätöksentekoa]
Kaksi koetta yhdessä Association for Psychological Science -yhdistyksen lehdistä.
https://doi.org/10.1177/0956797610389191
Tekijät
Pelikorttien kuvitus: Adrian Kennard, julkaistu CC0 Public Domain -ehdoin. Generaattori ja lähdekoodi: me.uk/cards.