Intuition Check
Una app sencilla que respeta tu privacidad, para poner a prueba y entrenar tu intuición, en el iPhone, el iPad y las computadoras Mac con chip de Apple. Ejercita tu instinto con cartas, números o imágenes — en solitario o con un compañero cerca de ti.
Descargar en el App Store → Tus propios conjuntos creados con IA →Intuición
Qué es la intuición
La intuición es saber algo sin poder decir cómo lo sabes: una corazonada, una sensación instintiva, una certeza repentina.
Los psicólogos describen bien un tipo de intuición — la experiencia que actúa más rápido que el pensamiento. Quien ha hecho algo muchas veces detecta un patrón antes de poder expresarlo con palabras: primero llega la sensación, y las palabras, después.1
Muchas personas describen también un segundo tipo: saber algo que ninguna experiencia podría haberles dicho — quién llama antes de que el teléfono muestre un nombre, o qué carta está boca abajo. La ciencia debate si este tipo existe.23 Este segundo tipo es el que la app te permite poner a prueba, con valores elegidos al azar.
Cómo puede manifestarse
Muchas personas conocen momentos como estos:
- Piensas en alguien y, un momento después, te llama.
- Tomas el teléfono para llamar a un amigo y te suena en la mano — es ese amigo.
- Te despiertas un par de minutos antes de que suene el despertador.
- Sabes quién llama antes de mirar la pantalla.
- Te acuerdas de alguien a quien no ves desde hace mucho tiempo y te llama ese mismo día.
- Tu primera impresión sobre una persona resulta ser correcta.
- La solución a un problema llega sola — por la mañana, en la ducha, durante un paseo.
- Sientes que alguien te mira, te das la vuelta y, efectivamente, alguien te está mirando.
En encuestas telefónicas a personas elegidas al azar en Inglaterra y en California, entre el 65% y el 78% dijo haber llamado a alguien que le respondió que justo estaba a punto de llamarlo, y entre el 47% y el 49% dijo haber sabido quién llamaba sin ninguna pista.45 La mayoría de los adultos creen que pueden notar cuándo los mira alguien a quien no ven.6
Algunos de estos casos tienen una explicación conocida. El cuerpo puede llevar la cuenta de la hora a la que esperas despertarte: en un experimento, el nivel de una hormona que prepara al cuerpo para despertarse empezó a subir alrededor de una hora antes del momento en que, según se les había dicho a los participantes, los iban a despertar.7 Una pausa puede ayudar con un problema: en muchos experimentos, las personas resolvieron mejor los problemas después de dejarlos a un lado durante un tiempo,8 y en un estudio, una noche de sueño duplicó con creces la proporción de personas que descubrieron una regla oculta que permitía resolver una tarea más rápido.9 Y una primera impresión puede ser acertada: desconocidos que vieron a un profesor durante 30 segundos en total, sin sonido, lo calificaron de forma muy parecida a como lo hicieron sus alumnos al final del semestre.10
Una vez, dos veces — o una y otra vez
Una o dos veces, una coincidencia así se atribuye fácilmente al azar. Cuando ocurre una y otra vez, es natural preguntarse si hay algo más detrás.
Aquí la memoria lleva mal la cuenta. Guarda las veces en que sonó el teléfono y olvida las muchas veces en que pensaste en alguien y no pasó nada. Y con suficientes días, personas y pensamientos, es inevitable que de vez en cuando se produzcan coincidencias sorprendentes.11
Por eso es útil contar. En esta app, la probabilidad de acertar por azar se conoce con exactitud: solo depende de cuántos valores pueden salir. Las estadísticas muestran si tus resultados se mantienen dentro de lo que daría el azar o se apartan de ello — consulta Cómo leer tus resultados.
La intuición en la vida cotidiana
Los sentimientos y las señales del cuerpo intervienen en muchas decisiones. Las personas que simplemente eligieron el póster que les gustaba estaban más satisfechas con él tres semanas después que aquellas a las que antes se les había pedido que enumeraran por qué les gustaba o no les gustaba cada póster.12 En otro experimento, unas personas jugaban a un juego de cartas con cuatro barajas: con el tiempo, dos barajas hacían ganar y dos hacían perder, pero a los jugadores no se les decía cuáles. El cuerpo reaccionaba antes de cada elección, y estas señales se inclinaban hacia lados distintos según la persona: en general, hacia las barajas ganadoras en unos y hacia las perdedoras en otros. Los investigadores midieron lo bien que cada persona percibía las señales de su cuerpo por la precisión con la que podía sentir los latidos de su propio corazón. Cuanto más precisa era esa percepción, más fielmente las elecciones de la persona seguían las señales del cuerpo — para bien o para mal.13
La intuición es más confiable donde hay patrones reales en los que apoyarse y donde se sabe pronto y con claridad si se acertó. Una fuerte sensación de certeza no es, por sí sola, señal de tener razón.1
Por eso, estar en buen contacto con tu intuición significa dos cosas: notarla y aprender cuándo puedes confiar en ella. Para aprender cuándo puedes confiar en ella, anota tu estado mientras juegas: así las estadísticas comparan tus rondas por estado y por momento del día, y puedes ver cuándo te va mejor. Consulta Tu estado.
¿Hay algo más detrás?
La ciencia no ha resuelto si las personas pueden saber lo que ninguna experiencia podría haberles dicho. En 2018, una revisión publicada en la principal revista de la Asociación Americana de Psicología concluyó que las pruebas a favor de estos efectos son aproximadamente tan sólidas como las de los resultados aceptados en psicología.2 Una réplica en la misma revista sostuvo que estos efectos son imposibles y que los resultados deben de tener otras causas.3 La cuestión sigue abierta, y la app te permite examinarla con tus propias rondas.
Cómo funciona la app
Una ronda
Elige un conjunto para adivinar — cartas, números o un conjunto de imágenes — e intenta intuir un valor antes de que se muestre. Después, revélalo y comprueba si acertaste. La app cuenta tus aciertos y los compara con lo que daría el puro azar.
Intuición pasiva y activa
La app tiene dos modos:
- Intuición pasiva — el valor ya está elegido y oculto. Intentas leer cuál es.
- Intuición activa — no hay nada elegido hasta que revelas el valor. Intentas hacer que un valor aparezca por tu voluntad.
Las estadísticas mantienen separados los dos modos, para que puedas ver cuál te va mejor.
Tres formas de jugar
Con los selectores de la parte superior de la vista principal eliges el estilo de juego y el modo. Las mismas opciones están en Configuración → Estilo de juego y modo.
Uno a uno
Un valor a la vez. Toca para revelarlo, vuelve a tocar para ocultarlo y luego revela el siguiente. Si activas “Revelar sin ocultar” en Configuración → Uno a uno, cada toque muestra directamente el siguiente valor. “Mostrar la indicación” agrega una línea de indicación debajo del valor.
Si la opción “Método” del registro de respuestas está en “Ingresar tu respuesta” — así viene al principio —, cada vez que vas a revelar un valor la app te pide antes tu respuesta y marca la ronda por sí sola. Consulta Qué se registra.
Selección rápida
Todos los valores del conjunto están dispuestos en una sola cuadrícula. Cada toque es una ronda independiente. En el modo activo, el valor se extrae en el momento en que tocas; en el modo pasivo, se extrae de antemano, justo después de tu toque anterior. Un acierto puede señalarse con un destello verde y una vibración.
Los conjuntos de números con más de 1,000 valores no tienen cuadrícula: reduce el intervalo en la configuración del conjunto o juega en el estilo “Uno a uno”.
Serie
En el modo activo, elige el valor que quieres, concentra tu voluntad en él y tócalo: la app extrae al azar una serie de valores y cuenta cuántos coinciden con el que tocaste. Una serie puede tener de 2 a 12 extracciones, o 100, 1,000, 10,000, 100,000, 1 millón o 10 millones. La longitud se ajusta en la vista principal. En Configuración → Serie, el regulador “Duración de la serie” reparte las extracciones en un tiempo de hasta 10 segundos; si está en cero, no hay pausas. Cada serie entra en las estadísticas como un único registro.
Al elegir el estilo “Serie”, el modo pasa a intuición activa.
Cartas y números
Un conjunto de cartas usa una baraja de 36 o 52 cartas, con o sin comodines. Un conjunto de números usa números de hasta 9 dígitos — tú eliges el número máximo de dígitos. Las dos cosas se cambian en la vista de configuración del conjunto para adivinar: en la vista principal, toca el engranaje junto al selector de conjuntos.
Vista despejada
Mantén presionado en cualquier parte de la vista principal para ocultar los selectores, la barra de herramientas, la barra de estados y la indicación. Vuelve a mantener presionado para que reaparezcan. Los contadores de rondas y el resultado siguen visibles.
En Configuración → Aspecto y reacciones, en el apartado “Vista despejada”, “Mostrar el botón” agrega a la barra de herramientas un botón con un ojo — tócalo para activar la vista despejada — y “Recordar la vista despejada” mantiene la vista despejada activa entre inicios de la app.
Contadores de rondas
La vista principal puede mostrar cuántas rondas jugaste y cómo te va: un contador y un resultado para cada combinación de modo y estilo de juego, con un botón que restablece el contador y borra el resultado. Al cambiar a otro conjunto para adivinar también se restablecen todos los contadores y resultados.
Para conservar los contadores de rondas y los resultados entre inicios de la app, activa “Guardar contadores de rondas y resultados” en Configuración → Estadísticas. Está disponible mientras “Guardar estadísticas en el dispositivo” está activado.
Conjuntos para adivinar
Un conjunto para adivinar es de donde salen los valores que adivinas: cartas, números o un conjunto de imágenes. Al principio, la vista principal solo muestra “Números” y “Cartas”. Puedes agregar los demás conjuntos que vienen con la app tocando junto al selector de conjuntos en la vista principal.
El selector de conjuntos
El selector de la parte superior de la vista principal muestra tus conjuntos para adivinar. Con el “Estilo del selector” predeterminado, muestra botones cuando tiene uno o dos conjuntos que mostrar y, a partir de tres, el nombre del conjunto actual, que abre una lista de los conjuntos. Si eliges la opción “Vista aparte” en “Estilo del selector”, el selector abre siempre esta lista.
Cada conjunto tiene su propio interruptor “Usar”. Un conjunto con este interruptor desactivado no se ofrece en ninguna parte — ni en el selector de conjuntos de la vista principal, ni en el juego con compañero, ni en las estadísticas —, pero sigue en tu lista de conjuntos en Configuración → Conjuntos para adivinar → Administrar conjuntos, y al volver a activarlo vuelven sus estadísticas.
El botón junto al selector de conjuntos abre la vista “Agregar un conjunto”. Muestra los conjuntos adicionales que vienen con la app, listos para agregarlos a la vista principal; debajo hay un botón para crear un conjunto vacío, al que más tarde puedes agregar tus propias imágenes, y el bloque “Tu asistente de IA” para agregar un conjunto creado por un asistente de IA. El botón con forma de engranaje junto al selector de conjuntos abre la configuración del conjunto seleccionado. Los dos botones se pueden ocultar en Configuración → Conjuntos para adivinar con “Mostrar el botón de agregar conjunto” y “Mostrar el botón de configuración del conjunto”.
Conjuntos predefinidos
Toca junto al selector de conjuntos en la vista principal — o abre Configuración → Conjuntos para adivinar → Administrar conjuntos, toca y elige “Conjuntos predefinidos”. Abre un conjunto y toca “Agregar a mis conjuntos para adivinar”.
El conjunto que agregas es tu propia copia: puedes cambiarle el nombre, reordenar sus imágenes, dejar algunas fuera del juego, usarlo en el juego con compañero o enviárselo a alguien.
Un conjunto con tus propias imágenes
Desde la vista principal: toca junto al selector y luego “Conjunto de imágenes vacío”, debajo de los conjuntos predefinidos. Deja el nombre “Mis imágenes” o escribe otro, y toca “Crear”. La app cambia al nuevo conjunto y lo abre.
O abre Configuración → Conjuntos para adivinar → Administrar conjuntos, toca y elige “Conjunto de imágenes vacío”; luego ponle un nombre al conjunto y toca “Crear”. Se abre el nuevo conjunto.
Dentro del conjunto, toca y agrega imágenes desde “Fotos” o “Archivos” — varias a la vez —, toma fotos de una en una con la opción “Cámara” o pega una imagen o un SVG copiados con “Pegar desde el portapapeles”.
Nombres de las imágenes
Toca una imagen en la vista del propio conjunto para verla más grande. Su “Nombre” es el campo que hay debajo: escribe uno, cámbialo o bórralo. Una imagen agregada desde “Archivos” empieza con el nombre del archivo sin su extensión; una de “Fotos” o de “Cámara”, o una pegada con “Pegar desde el portapapeles”, empieza sin ninguno. En un conjunto con nombres en varios idiomas, “Nombres por idioma”, debajo del campo, contiene el nombre de la imagen en cada uno de ellos. Debajo de la imagen ves el formato y el tamaño del archivo que guarda la app.
Un asistente de IA puede crear imágenes y conjuntos enteros para ti: Tus propios conjuntos creados con IA.
Orden, disposición y qué se usa en el juego
En la vista del propio conjunto, “Organizar” te permite arrastrar las imágenes para ponerlas en otro orden y elegir “Imágenes por fila”, “Alineación” y “Mostrar completas” para la cuadrícula.
Mantén presionada una imagen para ver más opciones:
- “No usar en el juego” mantiene la imagen en el conjunto, pero nunca se extrae. “Usar en el juego” la devuelve al juego.
- Marcar como sustituto “?” muestra esa imagen mientras un valor aún está oculto en el estilo “Uno a uno”. Esa imagen nunca se extrae. Un conjunto solo puede tener un sustituto “?”.
Cambio de nombre y eliminación
El nombre del conjunto es el primer campo de su vista. En los conjuntos predefinidos, al editarlo cambias el nombre en el idioma actual de la app; los nombres en otros idiomas están en “Nombres por idioma”.
Para eliminar un conjunto, desliza el dedo sobre él en tu lista de conjuntos en Configuración → Conjuntos para adivinar → Administrar conjuntos o mantenlo presionado, y elige “Eliminar”. La app te pregunta antes. Las estadísticas del conjunto se eliminan con él.
Enviar conjuntos
Enviar un conjunto
Un conjunto con tus propias imágenes puede viajar como un único archivo con la extensión .guesset. El archivo contiene las imágenes, su orden, la disposición y los nombres del conjunto, además de qué imágenes están en juego y cuál es el sustituto “?”. “Cartas” y “Números” vienen integrados en la app y no se pueden enviar.
- Abre Configuración → Conjuntos para adivinar → Administrar conjuntos.
- Mantén presionado el conjunto y elige “Exportar…”. El botón de compartir que hay dentro del conjunto hace lo mismo.
- Elige cómo enviarlo: Mail, Mensajes, AirDrop, Archivos u otra app.
Para usar un conjunto al jugar con alguien que está cerca, no necesitas ningún archivo: consulta Jugar con tus propias imágenes.
Abrir un conjunto que te enviaron
Toca un archivo .guesset en Mail, Mensajes o Archivos, o acepta uno enviado por AirDrop, y ábrelo con Intuition Check. Se convierte en tu propia copia independiente y aparece al final de tu lista y en el selector.
Un archivo que ya está guardado en el dispositivo también se puede importar desde la propia app: en Configuración → Conjuntos para adivinar → Administrar conjuntos, toca y elige “Importar desde un archivo”.
Juego con compañero
Cómo funciona
Dos dispositivos juegan juntos: una persona elige un valor y la otra intenta adivinarlo. Los dispositivos se comunican solo entre sí (de dispositivo a dispositivo cuando están cerca, o a través de una red Wi‑Fi compartida). Las rondas del juego con compañero no se incluyen en las estadísticas.
La conexión
Activa el Wi‑Fi en los dos dispositivos. La conexión funciona mejor en la misma red Wi‑Fi, y entonces los dispositivos pueden estar en cualquier lugar de esa red. Sin una red compartida, se conectan de dispositivo a dispositivo — mantenlos cerca el uno del otro.
Los dispositivos solo se buscan mientras el juego con compañero está abierto en los dos.
Para empezar
- En los dos dispositivos, abre el juego con compañero: toca el botón de dos personas en la barra de herramientas de la vista principal o toca “Abrir el juego con compañero” en Configuración → Juego con compañero. Si el botón no aparece, activa “Mostrar el botón del juego con compañero” en Configuración → Juego con compañero.
- Cada dispositivo muestra “Buscando un compañero cerca de ti…” y luego el otro dispositivo, debajo de “Detectados cerca:”. Se conectan por sí solos.
La primera vez, tu dispositivo pregunta si la app puede encontrar dispositivos en tu red local. Permítelo: sin ese permiso, los dispositivos no pueden encontrarse.
Una ronda
- En “Jugar con:”, elige con qué jugar — cualquiera de los conjuntos para adivinar que tengas en uso.
- Elige tu rol: “Elijo una carta” (o un número, o una imagen) o “Intento adivinar”. A tu compañero le toca el otro rol.
- Quien elige escoge un valor y quien adivina da su respuesta. Después, los dos dispositivos muestran el valor elegido y la respuesta dada, con “¡Correcto!” o “Esta vez no”.
- Con “Volver a jugar”, los dos dispositivos regresan al primer paso: elegir con qué jugar y los roles de la siguiente ronda.
Jugar con tus propias imágenes
Cuando juegas con uno de tus conjuntos de imágenes, primero se le pide a tu compañero que toque “Descargar”, salvo que ya tenga el mismo conjunto. Su copia solo se usa en el juego con compañero y nunca modifica sus propios conjuntos. Solo se envían las imágenes que todavía no tiene.
Con “Conservar los conjuntos de imágenes recibidos” activado en Configuración → Juego con compañero, la siguiente partida con el mismo compañero empieza sin esperar. Si está desactivado, los conjuntos recibidos se eliminan cuando sales del juego con compañero. Los conjuntos recibidos aparecen en Configuración → Conjuntos para adivinar → Administrar conjuntos, en el apartado “Recibidos de tu compañero”, donde “Agregar a mis conjuntos para adivinar” crea una copia que es totalmente tuya.
El nombre de tu compañero
En el iPhone y el iPad, las apps solo ven un nombre de dispositivo genérico, como “iPhone”, así que dos dispositivos pueden parecer iguales. Una vez establecida la conexión, toca el lápiz que hay junto al nombre de tu compañero y escribe el nombre que prefieras. Ese nombre solo se muestra en tu dispositivo.
Si los dispositivos no se encuentran
- Abre el juego con compañero en los dos dispositivos, con el Wi‑Fi activado.
- Si puedes, conecta los dos dispositivos a la misma red Wi‑Fi; si no, mantenlos cerca el uno del otro.
- Las redes de invitados y las redes públicas — en hoteles, cafeterías, oficinas — a menudo bloquean el tráfico entre dispositivos. Prueba con otra red, o sin ninguna red, con los dispositivos uno al lado del otro.
- Si rechazaste la solicitud de acceso a la red local, vuelve a activar el acceso en la app Configuración: Privacidad y seguridad → Red local, y luego activa Intuition Check.
- Si un dispositivo aparece debajo de “Detectados cerca:” pero nunca llega a conectarse, sal del juego con compañero en los dos dispositivos y vuelve a abrirlo: la búsqueda empieza de nuevo desde cero.
- Solo juegan juntos dos dispositivos a la vez. Un tercero sigue buscando hasta que uno de los dos sale del juego.
Estadísticas
Qué se registra
Los estilos “Selección rápida” y “Serie” siempre registran tus rondas. El estilo “Uno a uno” las registra según la opción “Método” del apartado “Registro de respuestas”, en Configuración → Uno a uno:
- “Ingresar tu respuesta” — la opción predeterminada. Eliges tu respuesta antes de que se revele el valor, y la app evalúa la ronda.
- “Marcar a mano” — después de cada revelación, toca ✓ o ✗. Si te saltas una revelación sin marcarla, no se cuenta.
- “Desactivado” — el estilo “Uno a uno” no registra nada.
Un conjunto para adivinar con un solo valor posible no registra nada. Las rondas del juego con compañero nunca se registran.
Ver tus estadísticas
Toca el botón de estadísticas en la barra de herramientas de la vista principal o toca “Ver las estadísticas” en Configuración → Estadísticas. Las estadísticas se abren para el conjunto para adivinar, el estilo de juego y el modo con los que estás jugando. Los filtros de arriba las acotan por “Periodo”, “Conjunto para adivinar”, “Estilo de juego”, “Modo” y — mientras anotas tu estado — “Estado”.
Las secciones que no necesites se pueden desactivar en la vista de configuración de las estadísticas — ábrela con el botón de configuración de la vista de estadísticas o, desde la vista principal, a través de Configuración → Estadísticas.
Qué significan las cifras: Cómo leer tus resultados.
Conservar tus estadísticas
Al principio, las estadísticas solo se conservan en la memoria, durante la sesión actual: se borran cuando se cierra la app, incluso cuando iOS la cierra en segundo plano. Para conservarlas, activa “Guardar estadísticas en el dispositivo” — arriba en la vista de estadísticas o en Configuración → Estadísticas. También se guardan las rondas de la sesión actual. Las rondas de sesiones anteriores de la app que nunca se guardaron no se pueden recuperar.
Al desactivar el interruptor se eliminan las estadísticas guardadas. Antes, la app te lo pregunta con “¿Dejar de guardar las estadísticas?”; después de tocar “Eliminar las estadísticas guardadas”, solo quedan las rondas jugadas desde la última vez que se abrió la app, y solo en la memoria: desaparecen en cuanto se cierra la app. Esto no se puede deshacer.
Borrar
En la parte inferior de la vista de estadísticas:
- Borrar todas las estadísticas de “…” — todas las estadísticas registradas con el conjunto para adivinar elegido en el filtro.
- “Eliminar los registros estadísticos filtrados (cantidad: …)” — solo los registros que muestran los filtros.
- “Borrar todas las estadísticas” — todo.
La app te pide que confirmes cada una de estas eliminaciones, y ninguna se puede deshacer.
Exportar
Toca el botón de compartir en la barra de herramientas de la vista de estadísticas y luego “Exportar estadísticas a un archivo de texto”. El archivo es una tabla (CSV) con exactamente los registros que muestran tus filtros: una fila por ronda o, en el estilo de juego “Serie”, una por serie. Las apps de hojas de cálculo, como Numbers, pueden abrirlo. También puede resultarte útil mostrarle este archivo a tu asistente de IA y preguntarle, por ejemplo: “¿En qué circunstancias parece funcionar mejor o peor mi intuición?”
Cómo leer tus resultados
Las estadísticas no se limitan a contar aciertos. Comparan tus resultados con lo que se obtendría adivinando al azar con el mismo número de valores posibles, y te dicen con palabras sencillas si estás por encima del azar, por debajo de él o dentro de él.
Tu resultado y el azar
En la sección “Respuestas correctas”, “Tu resultado” aparece junto a “El azar obtendría”. Un mismo 30% puede significar cosas opuestas: con 3 valores posibles, adivinar al azar da alrededor del 33%, así que un 30% está un poco por debajo del azar; con una baraja de 52 cartas da alrededor del 2%, así que un 30% está muy por encima. La cifra del azar tiene en cuenta el número de valores posibles de cada ronda.
El veredicto
La app da un veredicto: desde “Dentro del azar”, pasando por ligeramente y claramente por encima o por debajo del azar, hasta “Muy por encima del azar” o “Muy por debajo del azar”. También indica lo raro que sería un resultado así adivinando al azar, por ejemplo: “aproximadamente 1 de cada 300 veces”.
Con pocas rondas, los resultados varían mucho solo por azar. Por eso el veredicto se vuelve más estable con cada nueva ronda.
Comparación de la intuición pasiva y la activa
Cuando tienes rondas en los dos modos, la sección “Intuición pasiva frente a activa” muestra los aciertos y la tasa de aciertos de cada uno, para que veas cuál te va mejor. No se muestra en el estilo “Serie”.
Mejores rachas
La sección “Mejores rachas” muestra tus rachas más largas de respuestas correctas seguidas, con el día, la hora y el estado que habías anotado. Una pausa más larga que “Pausa máx. entre rondas” — se ajusta en esa misma sección — pone fin a una racha, y lo mismo ocurre si cambia el estado anotado.
A lo largo del tiempo
La sección “Tasa de aciertos a lo largo del tiempo” dibuja tu tasa de aciertos de cada día en cuanto tienes rondas de dos días distintos. La sección “Por momento del día” muestra por separado la mañana, la tarde, la tarde-noche y la noche.
Valores
Cuando las estadísticas corresponden a un solo conjunto para adivinar, con hasta 100 valores, enumeran los valores que más veces acertaste y los que más y menos eliges como respuesta — incluidos los que no eliges nunca, una vez que hayas dado tantas respuestas como valores tiene el conjunto.
Con frecuencia, las personas se inclinan por unos valores y evitan otros, y puede que algunos valores se acierten más a menudo que otros.
Los resultados pueden variar
Tus resultados pueden cambiar según tu estado y tus circunstancias. Nada de lo que sigue es un hecho comprobado — son posibilidades en las que vale la pena fijarse mientras juegas:
- Tu estado. Puede que te vaya de otra manera justo después de despertarte o a altas horas de la noche, descansado o cansado, tranquilo o estresado. Anota tu estado mientras juegas, y las estadísticas comparan tus rondas por estado y por momento del día.
- Confianza. Sentirte seguro de ti mismo, o lleno de dudas, podría coincidir con los resultados que obtienes.
- Por debajo del azar también cuenta. Acertar notablemente menos de lo que predeciría el azar también es una desviación del azar. Una posible lectura es que, en ese momento, la intuición está jugando en tu contra, y no que no esté pasando nada.
- Valores. Puede que aciertes algunos valores muchas más veces que otros, y que otros no los aciertes nunca, aunque los elijas con la misma frecuencia que el resto.
Lo que pueden decir los números
La app puede decirte si tus resultados se apartan del puro azar — nunca por qué, aunque la razón parezca evidente a partir de los datos. Toma las cifras como algo que explorar, no como una medida fija de quién eres. Consulta también Intuición.
Tu estado
La barra de estados
La barra de la vista principal te permite anotar cómo estás ahora mismo: “Descansado” o “Cansado”, “Tranquilo” o “Estresado”, “Seguro” o “Dudoso”, “Concentrado” o “Disperso”, tu ánimo y circunstancias como “Al despertar”, “Después del café” o “Después del ejercicio”. Lo que anotes se registra con cada ronda que juegues a partir de ese momento, hasta que lo cambies o se olvide.
Así, las estadísticas comparan tus rondas por estado y por momento del día, y cada racha muestra el estado que habías anotado. Consulta Los resultados pueden variar.
Cuándo se olvida
Lo decide la opción “Restablecer el estado anotado”, en Configuración → Tu estado:
- “Al abrir la app” — la opción predeterminada. La próxima vez que se inicie la app, no habrá nada anotado.
- “Después de una pausa” — se olvida cuando llevas sin jugar el tiempo que elijas en “Pausa”, de 15 minutos a 1 día.
- “Nunca” — se conserva hasta que lo cambies.
Tus propios estados
En Configuración → Tu estado → Administrar estados puedes renombrar, reordenar, agregar y ocultar estados, agregar ejes propios y desactivar un eje con su propio interruptor “Usar”: un eje desactivado sale de la barra de estados, las nuevas rondas no lo registran y las estadísticas lo dejan fuera.
Para quitar la barra por completo, desactiva “Anotar tu estado durante las rondas”; así no se registra ningún estado.
La barra se oculta cuando la vista despejada está activada y, en el estilo “Uno a uno”, cuando el registro de respuestas está desactivado.
Aspecto y funciones
Temas
En Configuración → Aspecto y reacciones hay cuatro temas — “Arena”, “Océano”, “Bosque” y “Anochecer” — y cada uno tiene una versión clara y otra obscura. En “Aspecto” eliges “Claro”, “Obscuro” o “Sistema”; con “Sistema”, la app sigue la configuración de tu dispositivo y cambia cuando este cambia. El tema también da color a las cartas y a la mayoría de las imágenes predefinidas.
Reacciones
En “Reacción al acierto”, “Vibración” y “Animación” señalan una respuesta correcta con una vibración y un destello verde; puedes desactivar cualquiera de las dos. Funcionan en el estilo “Selección rápida” con cada toque, en el estilo “Serie” cuando todas las extracciones de una serie son aciertos y en el estilo “Uno a uno” cuando ingresas tu respuesta antes de que se revele el valor. Un fallo no produce ni la vibración ni el destello. Además, la vibración necesita que la opción “Vibración del sistema” esté activada en la app Configuración, en “Sonidos y vibración”.
“Animación de pulso al tocar” anima con un breve pulso la casilla que tocas en los estilos “Selección rápida” y “Serie”, y el valor que revelas en el estilo “Uno a uno” cuando marcas las rondas a mano o no las registras.
Una vista principal sin estorbos
Casi todo lo que hay en la vista principal se puede ocultar. Cada interruptor está en la vista de Configuración a la que pertenece:
- Configuración → Estilo de juego y modo: dos interruptores “Mostrar el selector”, uno para el estilo de juego y otro para el modo.
- Configuración → Conjuntos para adivinar: “Mostrar el selector”, “Mostrar el botón de agregar conjunto”, “Mostrar el botón de configuración del conjunto”.
- Configuración → Selección rápida: “Mostrar el botón de opciones de la cuadrícula”.
- Configuración → Uno a uno: “Mostrar la indicación”.
- Configuración → Serie: “Mostrar la longitud de la serie en la vista principal”, “Mostrar la duración de la serie en la vista principal”, “Mostrar el botón de opciones de la cuadrícula” (el mismo interruptor que en Configuración → Selección rápida).
- Configuración → Tu estado: “Anotar tu estado durante las rondas”.
- Configuración → Estadísticas: “Mostrar el botón de estadísticas”.
- Configuración → Juego con compañero: “Mostrar el botón del juego con compañero”.
- La configuración de cada estilo de juego (“Selección rápida”, “Uno a uno”, “Serie”): “Mostrar el contador de rondas”, Mostrar el interruptor “Resultados”, “Mostrar el resultado”.
Para quitar del selector un solo conjunto para adivinar, desactiva “Usar” en la configuración de ese conjunto; entonces el conjunto también desaparece del juego con compañero y de las estadísticas. Al activar la vista despejada se oculta de una vez la mayoría de los elementos de la vista principal.
Funciones
En Configuración → Funciones hay un interruptor para Estilo de juego “Serie” y otro para “Contadores de rondas y resultados en la vista principal”. Una función desactivada desaparece de la vista principal y de Configuración.
Idioma
En Configuración → Idioma puedes elegir el idioma de la app con independencia del idioma de tu dispositivo, y esa opción también define cómo se escriben los números y las fechas. En “Idiomas sugeridos”, la lista muestra primero el idioma del sistema y después cada uno de los idiomas de tu dispositivo que ofrece la app, en el orden establecido en tu dispositivo; todos los demás idiomas aparecen a continuación en “Otros idiomas”. Si el nuevo idioma se lee en sentido contrario, cierra la app y vuelve a abrirla después del cambio (el sentido de la escritura solo cambia correctamente tras reiniciar la app).
Debajo de la fila “Idioma” en Configuración está el interruptor “Mostrar las indicaciones en Configuración”; muestra u oculta las explicaciones que aparecen debajo de las opciones.
Hora gratis y suscripción
La hora gratis
La app se descarga gratis e incluye una hora de tiempo de uso para probar todo lo que hay en ella. La hora solo cuenta mientras la app está abierta en pantalla, y se va sumando a lo largo de todas tus sesiones — mientras la app está cerrada o en segundo plano, el tiempo no corre.
Cuando se agota la hora, la vista de suscripción se abre por sí sola. Si ese tiempo no te bastó para decidir si te suscribes, puedes tener más: “Restablecer la hora gratis” te da otra hora, hasta 3 veces — 4 horas de tiempo gratis en total.
La suscripción
Para seguir usando la app después, hay una suscripción con dos planes, “Mensual” y “Anual”. La suscripción es compatible con Compartir en familia.
Suscribirse
Abre Configuración → Suscripción → Suscribirse.
Administrar o cancelar
Las suscripciones las factura Apple. Configuración → Suscripción → Administrar la suscripción te lleva a la tuya. La suscripción de la app también se puede administrar de la forma habitual, desde las suscripciones de tu cuenta de Apple en la configuración de tu dispositivo. Si cancelas una suscripción, se detienen las renovaciones automáticas futuras, pero conservas el acceso hasta que termine el periodo actual.
Si tienes el plan mensual, puedes pasarte al plan anual con Configuración → Suscripción → Cambiar al plan anual.
Reembolsos
Los reembolsos los procesa Apple: solicita uno en reportaproblem.apple.com. No tenemos acceso a tus datos de pago y no podemos emitir un reembolso nosotros mismos — pero escríbenos también si algo salió mal, porque es la única forma de que nos enteremos.
Restaurar una compra
En un dispositivo nuevo, abre Configuración → Suscripción → Suscribirse y toca “Restaurar compras”. Así también recuperas una suscripción que comparte contigo un miembro de tu familia. Usa la cuenta de Apple con la que se hizo la suscripción o una del mismo grupo familiar.
Tus datos
En resumen
No hay cuentas ni servidores. La app no envía tus datos ni a nosotros ni a ninguna otra empresa. El juego con compañero intercambia datos solo con el otro dispositivo — en una red Wi‑Fi que comparten los dos dispositivos, o de dispositivo a dispositivo cuando ambos están cerca.
Dónde se guardan
Tu configuración, tus conjuntos para adivinar — incluidas las imágenes que agregas — y tu lista de estados se guardan en tu dispositivo, en el almacenamiento propio de la app. Hasta que actives “Guardar estadísticas en el dispositivo”, las estadísticas solo se conservan en la memoria mientras la app está en ejecución.
Como los datos de cualquier otra app, todo esto se incluye en las copias de seguridad de tu dispositivo.
La app no contiene herramientas de análisis ni informes de fallos.
Cuando nos escribes
El correo que nos envías es correspondencia corriente: solo lo conservamos el tiempo necesario para responderte.
Todos los detalles están en la Política de privacidad.
Tus propios conjuntos creados con IA
Puedes pedir a un asistente de IA, como un chatbot, que dibuje imágenes para un conjunto para adivinar o que cree un conjunto entero. Las imágenes son dibujos SVG. Una imagen SVG puede contener sus textos en varios idiomas, y entonces la app muestra los textos en el idioma configurado en la app. Una imagen también puede tomar los colores del tema de la app, tanto en su versión clara como en la obscura. Un conjunto puede tener su propio sustituto “?”: la imagen que se muestra mientras el valor está oculto. El asistente necesita la descripción de los formatos; cada petición de abajo incluye la dirección de esa descripción.
Crear un conjunto
- Copia una de las peticiones de abajo en el chat con el asistente y cámbiala como quieras: la temática, el número de imágenes (de 2 a 200), los idiomas.
- Si el asistente no puede abrir páginas web, dale también la descripción de los formatos: en la sección Descripción de los formatos para IA, toca “Copiar” y pega la descripción en el mismo chat, o toca “Guardar” y adjunta el archivo guardado.
- El asistente responde con el conjunto en un solo bloque de código, a menudo con unas pocas palabras de explicación antes y después. Copia solo el bloque de código: en muchas apps de chat tiene su propio botón para copiar.
- En la app, toca en la vista principal y, en la vista “Agregar un conjunto”, toca “Pegar desde el portapapeles”. Si el asistente funciona en otro dispositivo, como una Mac, guarda allí el bloque de código en un archivo cuyo nombre termine en .json y toca “Importar desde un archivo” en su lugar. El nuevo conjunto se agrega y queda elegido; toca “Empezar a adivinar” para ir a la vista principal. Los mismos botones están también justo debajo de estos pasos.
Si hay un error, pide al asistente que lo corrija.
Un conjunto sin leyendas:
Crea un conjunto para adivinar llamado “Animales” para la app Intuition Check: 10 imágenes SVG de animales distintos, sin leyendas. Primero lee la descripción de los formatos y síguela: https://intuition-check.com/llm-formats.txtUn conjunto con una leyenda en cada imagen. La leyenda no cambia con el idioma de la app:
Crea un conjunto para adivinar llamado “Frutas” para la app Intuition Check: 8 imágenes SVG de frutas distintas, cada una con una leyenda debajo del dibujo: el nombre de la fruta. Primero lee la descripción de los formatos y síguela: https://intuition-check.com/llm-formats.txtUn conjunto con nombres en varios idiomas. Cada leyenda muestra el nombre de la imagen en el idioma de la app:
Crea un conjunto para adivinar multilingüe llamado “Planetas” para la app Intuition Check: 8 imágenes SVG de los planetas, cada una con una leyenda que muestre el nombre de la imagen en el idioma de la app. Da los nombres en español, alemán e hindi. Primero lee la descripción de los formatos y síguela: https://intuition-check.com/llm-formats.txtUn conjunto cuyas imágenes toman los colores del tema de la app:
Crea un conjunto para adivinar llamado “Clima” para la app Intuition Check: 8 imágenes SVG — sol, nube, lluvia, nieve, tormenta, viento, niebla y arcoíris — sin leyendas. Sus colores deben seguir el tema de la app, tanto en la versión clara como en la obscura. Primero lee la descripción de los formatos y síguela: https://intuition-check.com/llm-formats.txtCrear una imagen
El asistente también puede crear una sola imagen. Copia su bloque de código, abre uno de tus propios conjuntos de imágenes, toca y toca “Pegar desde el portapapeles”. La imagen se agrega sin nombre: tócala y escribe uno en el campo “Nombre”. También puedes guardar el bloque de código en un archivo cuyo nombre termine en .svg y, después, tocar en el conjunto y elegir “Archivos”; el nombre del archivo sin .svg pasa a ser el nombre de la imagen.
Dibuja una imagen SVG de un gato para la app Intuition Check. Primero lee la descripción de los formatos y síguela: https://intuition-check.com/llm-formats.txtQué más puede tener un conjunto
Pide al asistente que te explique qué permiten los formatos, con un ejemplo de petición para cada posibilidad:
Lee la descripción de los formatos para la app Intuition Check: https://intuition-check.com/llm-formats.txt Cuéntame de forma breve y con palabras sencillas qué se puede hacer en los conjuntos y en las imágenes: cómo pueden las imágenes seguir el tema de la app — los distintos temas, la versión clara y la obscura —; cómo pueden tener traducciones a otros idiomas los nombres de un conjunto y de sus imágenes; qué tipos de leyendas puede tener una imagen; qué puede mostrar el sustituto “?” del conjunto (su reverso). Para cada posibilidad, dame un ejemplo de petición que pueda enviarte. No dibujes nada todavía.Descripción de los formatos para IA
La descripción de los formatos está escrita en inglés para un asistente de IA, no para que la lea una persona. La misma descripción está en el sitio web, en la dirección que aparece en las peticiones de arriba.
This is a specification for language models; it is not formatted for human reading.
Format version: 1
Stable URL: https://intuition-check.com/llm-formats.txt
# Intuition Check: how to make SVG pictures and guess sets
Intuition Check is an iOS app. The app picks one picture of a guess set, hidden, and the user guesses which one.
A guess set is a named, ordered list of pictures. This text tells you how to produce (A) a whole guess set as
one JSON object, or (B) one picture as one SVG document, so that the app accepts it and draws it well.
The user's wishes always win. Every rule, default and style advice in this text is what you do when the user
has not said otherwise: anything the user asks for — any texts, any number of them, any place, size, shape,
colour or layout, a caption over the drawing, a word along an arc — overrides it. Only facts about the app
cannot be overridden, because the app enforces them (what it accepts and refuses, what it removes, how it
draws: sections 2, 3, 5 and the theme rules of 6 — but a sentence there that tells you what to do is still a
default, not a fact about the app); if a wish runs into one of them, do the closest thing the app allows and
say so.
## When the user asks what the formats allow (to explain, not to make)
Answer in the user's language, in plain words, without code. Keep apart what the app does and what you do by
default. The sizes, positions and orders in this text, and its sentences that tell you what to do ("put",
"give", "write", "keep"), are your defaults for a good result: the app does not check them and the user may
ask otherwise. Do not retell them as rules of the app ("must", "required", "not allowed"); say "by default I …".
What the app itself does:
- Themes: four themes, each light and dark. The app never recolours a picture on its own; a picture follows
the theme only where its own file says so (section 6), which you write when asked.
- Names: a set needs a name; a picture's name is optional. The set and every picture may have translations,
each its own languages; the app shows the one for the app language, else the default name.
- Captions: text in a picture is part of the drawing; the app never writes or translates it. A caption is one
fixed text, or holds versions in any number of languages, two included, and the app language picks one.
- The "?" placeholder: a set without a cover shows the app's own "?". The app draws no cover itself. A cover
is a picture like any other: it may show anything, with or without text, follow the theme and the app
language, and stand anywhere in the set.
- Limits: at least 2 pictures to guess (a cover is not one of them), at most 200 in all, 10 MB per SVG; one
refused picture refuses the whole set.
Do not translate the themes' code words (section 6).
Terms used below:
- name: the picture's name as stored in the app (`name`, `nameTranslations`). It is data, not part of the drawing.
- caption: a text drawn inside the picture (an SVG `<text>`). Optional. See section 4.
- app language: the language the app's interface is set to, in the app itself; it may differ from the device's
language. One of the codes in section 3.
- user's language: the language the user writes to you in, unless the user names another.
## 1. Output contract
A. The user asks for a SET (several pictures, "guess set", "set"):
- Answer with ONE JSON object as defined in section 2, in ONE code block. Nothing else is needed.
- If you add words outside the code block, they must not contain `{` or `}`: the app reads the pasted text
from the first `{` to the last `}`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block (chat apps usually show a copy button on it) and paste it into Intuition Check as a new set — or,
on another device, to save it as a file whose name ends in .json and open that file in the app.
B. The user asks for a single PICTURE:
- Answer with ONE SVG document (section 5) in ONE code block.
- If you add words outside the code block, they must not contain `<svg` or `</svg>`: the app reads the
pasted text from the first `<svg` to the last `</svg>`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block and paste it into one of their picture sets in Intuition Check; the picture is added without a
name. Or to save it as a file whose name ends in .svg and add that file to a set: the file name without
".svg" becomes the picture's name, so suggest a file name that is the name, e.g. `Cat.svg`.
In both: do not name the app's buttons or screens from memory, and do not translate their names yourself. The
app's help exists in every language of the app, with the exact names the app shows in that language; the steps
are in its section "#ai_sets", and the page for each language is listed in https://intuition-check.com/llms.txt. If
you can open web pages and the user wants the steps, take the names from the page in the user's language.
Otherwise the one sentence above is enough: the app's help and its own screens show the user where to paste.
Ask first, or proceed:
- Proceed without questions. Decide what the request leaves open, and say what you decided in a sentence or
two beside the code block:
- which things of a kind ("five animals": choose the animals);
- how many pictures, if no number is given: 4;
- the regional form of the user's language: take the likeliest and name it (e.g. "Canadian French");
- translations: as well as you can; name the languages you are least sure of;
- themes not mentioned: fixed colours, and one sentence that a version following the app's themes can be
made;
- a cover with nothing said about what it shows: the question mark (8c).
- Ask only when you cannot start: you cannot tell which language the names should be in, or the request names
no subject at all. Then at most 2 questions, in ONE message, in the user's language, each with the choice
you will make if the user does not mind; no code block in that message. Never ask what the message already
says. Plain words: no "code block", "JSON", "opaque", "plate", "import", nothing about how the format works.
- If you cannot ask (there is no dialogue), or the user tells you not to: proceed.
- What you say beside the code block is in the user's words: "its own background", not "opaque plate";
language names, not codes; at most four short points. The file endings .json and .svg are allowed: the
user needs them.
- Like all words outside the code block: no `{` or `}` next to a set, no `<svg` next to a picture. Do not
quote code outside the code block.
Defaults when the request does not say otherwise:
- No caption text in the drawing (section 4, option 1).
- No theme colours (section 6). Fixed colours of your own.
- Names: always give every picture a `name`, in the user's language. Give no `nameTranslations` unless the
user asks for other languages or for captions in several languages (section 4, option 4).
- Number of pictures: what the user asked for; never fewer than 2 or more than 200.
- No cover (section 2). A cover the user asks for is extra: it is not one of the pictures asked for.
## 2. The set format (JSON)
```json
{
"intuitionCheckSet": 1,
"name": "Animals",
"nameTranslations": { "ru": "Животные", "de": "Tiere" },
"images": [
{ "name": "Cat", "nameTranslations": { "ru": "Кот", "de": "Katze" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><circle cx=\"50\" cy=\"56\" r=\"30\" fill=\"#f57c00\"/><path d=\"M24 44 L28 14 L48 30 Z M76 44 L72 14 L52 30 Z\" fill=\"#f57c00\"/></svg>" },
{ "name": "Fish", "nameTranslations": { "ru": "Рыба", "de": "Fisch" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><ellipse cx=\"44\" cy=\"50\" rx=\"30\" ry=\"18\" fill=\"#1976d2\"/><path d=\"M70 50 L92 32 L92 68 Z\" fill=\"#1976d2\"/></svg>" }
]
}
```
(The drawings above are kept tiny to show the shape of the file. More examples are in section 8.)
Keys:
- `intuitionCheckSet` (required): the integer 1.
- `name` (required): the set's default name. Not empty.
- `nameTranslations` (optional, on the set and on each image): object, language code → name. Codes: section 3.
- `images` (required): array of at most 200 objects, at least 2 of them pictures to guess (a cover is one
more, not one of the 2).
Array order = display order. Each object:
- `name` (optional in the format; always give it): the picture's default name.
- `nameTranslations` (optional): as above.
- `svg` (required): one complete SVG document as a JSON string (section 5).
- `cover` (optional): the JSON literal `true` on the picture that is the set's cover (below). Leave it out
on every other picture.
- Unknown keys are ignored. Do not add any.
The cover: while the app hides the value to guess, it shows a "?" in its place. A set — any set, with or
without captions — may bring its own picture for that place: the cover. Give one ONLY when the user asks for
it (a cover, a back, a placeholder, a question-mark picture). It shows what the user wants: for a set of
playing cards, for example, the pattern of a card's back. If the user does not say what it shows, draw the set's
own frame, with a question mark where the other pictures have their subject (8c; the last picture of 8f);
when the pictures' plates differ in colour, a plate of the same family (8f: a neutral grey). Exactly one
picture gets `"cover": true` (if several do, the first counts and the others are ordinary pictures). The
cover is never an answer, so the set still needs at least 2 other pictures. Put it last in `images` (your default; the app takes it at any place). Give it
a `name` in words ("Question mark", not "?") and, in a multilingual set, `nameTranslations` in the same
languages as the pictures: the app shows the cover's name in the set's list of pictures, in the app language.
By default the cover has no caption (no word under it); the app draws any text it has. Its question mark is the cover's subject; it only borrows the
`class="caption"` pattern of section 4, option 4, so that it changes with the app language. Write the mark
as text (preferred) in two forms: `?`, and `؟` for Arabic and Urdu (the form those languages write). The app
does not change the mark itself: the cover holds both, and its own style sheet shows the one for the app
language. That works in every set, also in one without captions; the two marks are then its only `<text>`. Drawn as a
shape instead, the mark is the same in every app language: Arabic and Urdu see the Latin form. A cover with
a subject of its own (a card back, a cloud) needs no `<text>` and no style sheet.
A single picture (answer B) has no cover key: the user marks a picture as the cover inside the app. A single
picture meant as a cover and asked with a caption: do both, and say that the word will show on the cover.
Rules:
- Strict JSON, UTF-8: no comments, no trailing commas. Non-ASCII characters may be written as they are.
- Inside the `svg` string escape `"` as `\"` and `\` as `\\`; write the SVG on one line, or write each line
break as `\n`. No raw line break or tab inside a JSON string. Where you join two lines, put one space,
never nothing. No other escape is needed: an apostrophe stays `'` (`\'` is not JSON), and letters of any
script stay as they are.
- Types: `intuitionCheckSet` is the number 1, every name and translation is a string, `cover` is `true`. A
wrong type (`"cover": "true"`, a number as a name, `null` as a translation) makes the app refuse the whole
text.
- If the app refuses any one picture, it imports nothing and names the refused pictures. Every picture must
be valid.
- A name is one line of plain text. The app trims it, turns line breaks and tabs into spaces, and cuts it at
256 characters. Keep names short (one to three words): they are shown small.
How names are shown:
- A set is multilingual when the set or any image has at least one translation.
- In a multilingual set the app shows, for the app language: the translation with exactly that code; else
the translation with the code's first part (`fr-CA` → `fr`, `en-GB` → `en`, `es-419` → `es`); else the
default `name`.
- In a set without translations the app shows the default `name` in every app language.
When the user asks for a multilingual set:
- Default `name` (set and images): in the user's language.
- `nameTranslations`: one entry per requested language, on the set AND on every image. Give the same
languages on every image (the app does not require it: an image without an entry shows its default name).
- The language of the default `name` gets no entry of its own: a language without an entry shows the default
name.
- A regional code (`en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA`) needs its own entry only when its word
differs from the `en` / `es` / `fr` entry. `pt-BR` and `pt-PT` have no common code: each requested one that
is not the language of the default `name` needs its own entry (asked for "Portuguese" with an English default
name: give both). The same for `zh-Hans` and `zh-Hant`.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`, `fr`,
`es`), in names as in captions: every form of that language then shows it.
- Languages not named ("a multilingual set"), or "all languages": every language of section 3 — 53 codes,
47 entries (see there). Translate as well as you can (section 1). Leave out only a language you cannot
write at all (it then shows the default name), and tell the user which.
- `nameTranslations` change only names, never a caption. A multilingual set has no captions unless the user asks for them; a
caption drawn inside the pictures needs its own words for each language in the SVG itself (section 4,
option 4).
## 3. Language codes
Write the codes exactly as here (case matters):
ar bg bn ca cs da de el en en-AU en-CA en-GB es es-419 fi fr fr-CA gu he hi hr hu id it ja kk kn ko lt ml mr ms
nb nl or pa pl pt-BR pt-PT ro ru sk sl sv ta te th tr uk ur vi zh-Hans zh-Hant
A code that is not in this list is not an error: the app drops it. An entry
with an empty value is dropped.
"All languages" is 53 codes but 47 entries besides the default, in names and in captions: the user's language
is the default and needs none, and `en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA` show the `en` / `es` / `fr`
word unless theirs differs. (With a Bengali default, `en` is one of the 47 and `bn` is not.)
## 4. Captions (text inside the drawing): four options
Names (section 2) are separate from captions: the app never writes a name into a picture and never changes any
text of a picture. Give names always. Text in, on or under the picture — whatever the user calls it (name,
word, label) — is a caption request; a wish about the words alone (correct, careful) is not. If you leave out
something that was asked for, say so. Lettering that is part of the subject (STOP on a road sign) is
drawing, not a caption: allowed under every option, written once, with `lang`.
Urdu is drawn in Nastaliq, its own style, which reaches lower under the line than other scripts (about
0.3 × font-size): leave room under an Urdu caption. A `؟` in Urdu is smaller in Nastaliq: give it its own text and size (8c).
A caption's `lang` may be a regional code (`en-GB`, `fr-CA`), also where its name stands under the parent code.
Choose the caption option from the request:
1. DEFAULT — no caption. The drawing has no `<text>` that spells the name. Also for a multilingual set
whose user did not ask for captions.
2. ONE-LANGUAGE caption — when the user asks for a caption / label / word in or under the picture and names
no languages for it. A plain `<text>` with the word in the user's language; every app language shows
that same word. Put `lang="CODE"` of the caption's language on the `<text>`: a picture
with text is drawn anew for each app language, and without `lang` the letter forms follow the app language. No
`letter-spacing` in Arabic, Hebrew, Thai or an Indic script. Example:
`<text lang="ru" x="50" y="91" font-size="12" font-family="sans-serif" text-anchor="middle" fill="#222222">Кот</text>`
3. TWO LANGUAGES AT ONCE — when the user names exactly two languages for the word under the picture and does
not say it should change with the app's language. The same for any other text of the picture: each gets its
two lines. Two `<text>` lines, each with its `lang`, both always
shown, no style sheet for them: the user's language on top, font-size 10, baselines at y = 84 and 95,
subject in the upper 68 units (100-unit viewBox). A line in a script of 8b's "Lettering" block takes that
`font-family` as an attribute; a long word follows "Size" below. Names: the user's language as `name`,
the other in `nameTranslations`. Say that both words always show, and that captions that change with the
app's language can be made instead.
4. CAPTIONS IN SEVERAL LANGUAGES — when the user names three or more languages for the captions, or asks for
captions in all of the app's languages, or for captions that follow the app's language (= all of them).
The picture holds one caption per language and a small style sheet; through that style sheet the app
language picks the caption (8b, 8f). Languages: exactly those the user named; "all" = every language of
section 3 (53 codes, 47 entries: see there), translated as well as you can (section 1). In a set, give
every image `nameTranslations` with the same languages and the same words, so that the name and the
caption agree.
How option 4 works:
- A picture that contains `<text` or `:lang(` is drawn anew for each app language it is shown in, each time
inside an HTML page whose language is that app language: `<html lang="CODE">`, CODE from section 3 (`ru`,
`pt-BR`, `zh-Hant`, …). The app changes nothing in the file; the file's own CSS picks the caption with the
selector `:lang()`.
- `:lang(x)` matches a page in `x` and in every `x-…`: `:lang(fr)` also matches `fr-CA`, `:lang(es)` also
`es-419`, `:lang(en)` also `en-GB`. `pt-BR` and `pt-PT`, `zh-Hans` and `zh-Hant` are written separately.
- The pattern:
- All language versions of one text in ONE group with `class="caption"`; each `<text>` in it is one
language version, all at the same place.
- Any number of texts, anywhere and in any form (labels on parts, a title, words along an arc with
`<textPath href="#id">`): give each text its own group with `class="caption"` holding its language
versions; the one style sheet serves them all.
- The default caption has the class `default`. It carries the word of the default `name`, in the user's
language. It is shown when the page has no language and in every language that has no caption of its
own. The user's language is one of those: its code stands in no rule and on no caption. (In 8b and 8f
the default word is English, so `en` appears nowhere. The Zodiac files call this class `en`.) The
default caption is also shown on pages of other languages: give it `lang="CODE"` of the user's language.
If that language has a line in the "Lettering" block of 8b, add `.default` to that line's selector
(`.default, .hi, .mr { font-family: … }`; `.default` alone when no caption has that class), and to the
`letter-spacing: 0` line if you use letter-spacing.
- Every other caption's `class` lists the codes of the languages that show it. Languages with the same
word may share one caption: `class="bg ru"`; that changes only the `class`, never the style sheet. These
captions need no `lang`: each shows only on a page of its own language.
- The style sheet, in this order:
`.caption text { display: none }` — hide every caption;
`.caption .default { display: inline }` — show the default one;
`:lang(ar, bg, …) .default { display: none }` — hide the default one in every language that has its own
caption (list them all);
`:lang(ar) .ar, :lang(bg) .bg, … { display: inline }` — show each language's own caption.
- A regional code whose word differs from its parent's (`es-419` next to `es`): its own caption, its code in
both rules like any other, and one more rule: `:lang(es-419) .caption .es { display: none }` (the extra
`.caption` makes it win wherever it stands in the sheet). If its word is the parent's, give it nothing.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`,
`fr`, `es`), so every form of that language shows it. "Portuguese" alone: one caption
`class="pt-BR pt-PT"` when the word is the same.
- Do not repeat the default word under the user's own code (no caption, no rule, no `nameTranslations`
entry for it).
- Check: the codes in the hiding rule = the codes in the showing rule = the codes on the captions, and
each code is on exactly one `<text>`; the user's own code is in none of the three. Otherwise a language
shows no caption, or two at once.
- To leave a language out: no `<text>` for it and its code in neither rule. It then shows the default
caption.
- In a set: the same style sheet, the same attributes on the caption group and the same languages in every
picture, character for character. Only the words differ, and the size of a long word. (A cover has its
own text and rules: 8c, 8f.)
- Size: the app does not measure or shrink text. Choose one `font-size` on the group at which the captions
fit the free width. A word too long for it: first its own smaller `font-size` attribute, down to 9 (on a
100-unit viewBox); if it still does not fit, a shorter everyday word (and the same word as its name).
Never under 9. To estimate a width (measured in WebKit on a Mac):
- ordinary case in bold `sans-serif` (8f): 0.45 to 0.6 × font-size per letter. Треугольник is 77 of 100
units wide at font-size 12, and 68 at 10.5;
- a Chinese character: about 1 × font-size;
- Indic scripts, Thai, Arabic, Hebrew in bold `sans-serif`: 0.3 to 0.55 × font-size per code point (13
words measured).
- Case: ordinary case, as in 8f; capitals with wide spacing only for the style of 8b. Capitals follow each
language's rules: Turkish i → İ; Greek capitals lose the accent (ΑΣΤΈΡΙ → ΑΣΤΕΡΙ); German ß → SS.
- Fonts: copy the "Lettering" block of 8b (in a set, only the lines of the scripts you use). It gives every
script outside Latin, Cyrillic and Greek its own font list (fonts present on Apple devices, at a weight
they really have), and sets `letter-spacing` to 0 for Arabic, Hebrew, Thai and the Indic scripts — in most
of them the letters join or stack, and spacing breaks that (a line needed only when the group has
letter-spacing). Japanese, Chinese and Korean each get their
own font so that a Han character takes its regional form; that is why `zh-Hans` and `zh-Hant` keep
separate captions even with the same word.
- Direction: the page is left-to-right in every app language. Keep `text-anchor="middle"` for every script.
An Arabic, Hebrew or Urdu caption mixed with digits or Latin letters has not been tested: avoid it.
- A caption drawn twice (e.g. a shadow under it): put the group once inside `<defs>` with an `id`, and draw it
with two `<use href="#id">` that carry the colours and the offset.
- Whole set: captions and names in all languages fit in one answer. Write every language that was asked for, in
every picture. Do not ask about it, and do not tell the user it may not fit. In a set, leave out comments
and indentation.
- Never: fewer languages than asked without saying which are missing; captions left out when they were asked
for; one set spread over several messages or delivered as single pictures; a set cut short. A set is
always ONE JSON object in ONE message.
Start from 8f (a small set with captions and a cover, 100-unit viewBox). Take from 8b (a picture with a
caption in every language) its "Lettering" block, and its gold medallion style only when the user asks for
it; 8c is that set's cover. All three are complete and tested in the app. 8b and 8c are built like the app's
own Zodiac set; one of its files, if you can open web pages (you do not need it):
https://intuition-check.com/sets/zodiac/zodiac-08-scorpio.svg
## 5. The SVG document: what the app does with it
Facts (from the app's code):
- Size limit: 10,000,000 bytes per SVG (UTF-8). A larger SVG is refused.
- The app recognises an SVG by the characters `<svg` within the first 4096 bytes. Begin the document with
`<svg`: no XML declaration, DOCTYPE or comment before it.
- The app draws the SVG into a still bitmap, at most 1600 pixels on the longer side, with WebKit, inside an
HTML page. A picture with text is drawn anew for each app language it is shown in, and one with theme
rules for each theme. The background is transparent: where the drawing paints nothing, the app's own
background shows, light or dark depending on the user's theme.
- Scaling: the root's `viewBox` is fitted into the bitmap, aspect ratio kept, centred. `width` and `height`
on the root are ignored. A picture without a `viewBox` is accepted, but drawn unscaled (cut off or tiny):
always write one.
- The aspect ratio is read from the first `viewBox="minx miny width height"` in the first 4096 bytes: double
quotes, four numbers separated by spaces or commas, positive finite width and height. If it cannot
be read, the bitmap is square. Ratios outside 1:20 … 20:1 are clamped.
- `preserveAspectRatio="none"` on the root is replaced with `xMidYMid meet`: a picture is never stretched.
- Scripts never run. Nothing is loaded from the network: only content inside the file is drawn.
- Rendering has a time limit (10 seconds to load, 10 seconds to draw). A picture that exceeds it is refused.
Removed before drawing (so never write them; the rest of the picture is still drawn):
- these elements with everything inside: `script`, `foreignObject`, `meta`, `link`, `base`, `iframe`, `frame`,
`frameset`, `object`, `embed`, `applet`, `portal`, `form`, `input`, `button`, `textarea`, `select`, `option`,
`audio`, `video`, `source`, `track`, `template`, `noscript`;
- every attribute whose name starts with `on` (`onload`, `onclick`, …);
- every `href` / `xlink:href` whose value does not start with `#` (a part of the same file) or `data:image/`;
- `@import` in a style sheet; `<?xml-stylesheet …?>`; a DOCTYPE with an internal subset (`[ … ]`).
The removal works on the text of the file: the character sequences `on…=`, `href=` and `@import` are also
removed from text content and CSS, so do not write them there.
Allowed and drawn: shapes, `path`, `g`, `text`, `tspan`, gradients (`linearGradient`, `radialGradient`),
`pattern`, `mask`, `clipPath`, `filter`, `defs`, `symbol`, `use` with `href="#id"`, `<style>` with inline CSS,
`title`, `desc`, `image` with `href="data:image/…"` (a picture embedded in the file).
Not removed, but useless: `a` (a link does nothing in a picture in the app).
Rules for the SVG you write:
1. Root: `<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">` … `</svg>`. Double-quoted
attributes. Lower-case `<svg`. One root; no nested `<svg>` elements.
2. Square `viewBox` (`0 0 100 100`) unless the user asks for another shape. The same `viewBox` for every
picture of a set.
3. Self-contained: no external images, fonts, style sheets or links. For text use
`font-family="sans-serif"` (or `serif`, `monospace`), or the font lists of 8b, which end with one of them:
the text is drawn with the device's own fonts.
4. Well-formed XML: every element closed, attribute values quoted, `&` `<` `>` in text and attribute values
written as `&` `<` `>`. Only SVG elements; no HTML elements.
5. Readable small: the app shows pictures in a grid, each cell may be small. One clear subject that fills
most of the viewBox; a few large shapes; strong contrast; no fine detail. On a 100-unit viewBox: the
subject's lines at least 2 wide, a caption's font-size at least 10, a long word 9. Ornament may be
thinner (the rings of 8b); in a small cell it may not be seen. The examples in this text are bare on
purpose; do not copy their simplicity. Build the subject from about 4 to 10 shapes: its outline, its
parts, and one or two details that make it this thing and no other. Someone who sees only the picture
must be able to name it.
Pale or pastel colours: keep the silhouette. The subject's main shape, or an outline around it, must differ
from the plate by at least 3:1 — a darker outline, or a deeper plate. That is for the silhouette only:
details inside the subject are free.
6. Distinct: the game needs the pictures told apart at a glance. Every picture of a set must differ clearly
from every other in silhouette or in main colour — not only in a detail. No two pictures with the same
SVG text.
7. One style across a set: the same viewBox, margins, line weights, palette family, and the same kind of
background (all with a plate, or all without). With captions: the same lettering and caption place in
every picture.
8. Background: the bitmap is transparent and the app's background can be light or dark. Either draw an
opaque plate of your own behind the subject (e.g. `<rect width="100" height="100" rx="12" fill="…"/>`), or
use only colours that stay visible on both white and near-black, or use theme colours (section 6).
9. Unique `id` values inside one SVG. Ids of different pictures do not clash (each picture is drawn alone).
Do not start an id with `ic-` unless it is a theme rule, and do not name a class of your own `ic-…` or a
variable `--ic-…` (section 6).
10. Keep it light: no heavy filters (large blurs), no deep `use` nesting, no animation (the app does not remove it, but
draws the picture as a still image).
11. A caption must not cross the drawing, unless the user allowed it (labels on the drawing's parts, a word on
a sign or over the subject are such wishes). Any text stays inside its own shape when it has one (a sign,
a label, a slice), and inside the picture. Keep the subject and the caption
apart — e.g. on a 100-unit viewBox: the subject above y = 78 and one caption line with its baseline at
y = 91; with two lines (section 4, option 3), the subject above y = 68.
## 6. Theme colours
Use this section ONLY when the user asks for pictures that follow the app's theme, or for light and dark
versions. Otherwise use fixed colours, no id that starts with `ic-`, no class `ic-…` and no variable
`--ic-…`. When the user said nothing about
themes: fixed colours, and offer a version that follows the themes (section 1). "Looks good in light and dark
mode" is not a theme request: an opaque plate with fixed colours does it (section 5, rule 8). A theme request
wins over a colour description in the same message ("gold on dark, matching the app's themes": theme rules).
The app has four themes — `sand`, `ocean`, `forest`, `dusk` — each in a `light` and a `dark` version. These words
(and `light`, `dark`) are code words for the rules below, not what the user sees: the app shows the four themes
under its own names in the user's language. When you talk to the user, do not translate the code words
yourself; say "the app's four themes" (and "light" / "dark" in the user's language), or, if you can open the
app's help page in the user's language (see section 1), take the themes' names from it.
Every version has its own values for five colours:
- `background` — the colour behind every view;
- `surface` — plates and panels on a view;
- `text` — the app's text colour;
- `accent` — the colour of buttons that are not filled;
- `soft` — in a light version the same as `accent` (a `soft` part on an `accent` part cannot be seen there);
in a dark version a pale tone close to the text colour.
The values (#rrggbb), in the order background, surface, text, accent, soft:
- sand light: f6f2ea eae3d5 403a35 645339 645339
- sand dark: 1b1a18 282622 c7c4bd b89b70 d2cbbe
- ocean light: eef4f7 dde8ee 363d40 3e5a6a 3e5a6a
- ocean dark: 0d1a23 16272f bec4c7 82a3b6 c6d4db
- forest light: f1f4ec e1e8d7 353e34 4a5e46 4a5e46
- forest dark: 111a14 1b261e bec4bd 8ba586 c9d4c6
- dusk light: f6f1f6 eae0ec 3f3944 5e4a6a 5e4a6a
- dusk dark: 17121c 231b2a c2bdc5 a894b4 d3c9d9
All four themes are muted: no colour above is bright. `text`, `accent` and `soft` on `background` or `surface`
have a contrast of at least 5.6:1 in every version.
Fixed colours and theme colours mix freely: give rules only to the parts that should follow the theme (a plate,
outlines, the main shape) and keep your own fixed colours where the picture needs them (the arcs of a rainbow,
a red apple). A part without a rule is drawn as written in every theme.
A part that keeps a fixed colour sits on a plate that changes: check it against the light and the dark
background and surface values of the table. Near-black vanishes on the dark ones (#1b1b1b: 1.01:1), white and
yellow on the light ones (#ffffff: 1.11:1, #f9a825: 1.54:1). Give such parts the theme's text colour — in a
style sheet `fill: var(--ic-text, #333333)` (or `stroke:`), with ids `ic-text` or `ic-stroke-text` — or
use a mid-tone (#e53935: 3.30:1 on the light ones, 3.57:1 on the dark ones).
Captions on a themed plate take the theme's text colour. In a style sheet: one more line,
`.caption { fill: var(--ic-text, #222222) }`, in the sheet that already picks the caption; a single `<text>`
gets a class and the same line; a caption drawn twice through `<use>` gets the class on the `<use>` that
carries its colour (8b). With ids: give the caption group `id="ic-text"` and a written `fill`; the group may
also carry `class="caption"`; a single `<text>` may carry the id itself. A themed cover's mark is coloured
the same way.
There are two ways to write theme colours, and the app reads both. Use a style sheet (6.1), also when the
user will edit the file in Inkscape (6.4). Use ids (6.2) instead when the user says the file will be edited
in Figma, Illustrator, Affinity or Sketch, or asks for ids: those editors write the file anew and drop its
`<style>` element, while ids can come through as layer names (Figma only with its option to include ids).
One way per picture, and in a set the same way in every picture: the app accepts both in one file, but a
rule in a group's id overrides the sheet colours of the classed shapes inside that group.
### 6.1 A style sheet
The app adds to the root `<svg>` the classes `ic-sand` | `ic-ocean` | `ic-forest` | `ic-dusk` and `ic-light` |
`ic-dark`, and defines the CSS variables `--ic-background`, `--ic-surface`, `--ic-text`, `--ic-accent`,
`--ic-soft` — but only if the file contains, in its `<style>` element, one of those six class names after a
dot (e.g. `.ic-dark`), or, in `<style>` or in a `style` attribute, a variable name that starts with `--ic-`.
```
.plate { fill: var(--ic-surface, #dddddd) }
.leaf { fill: var(--ic-accent, #e53935) }
.ic-dark .dot { fill: #ffd54f }
.ic-forest.ic-dark .dot { fill: #69f0ae }
```
The second value inside `var()` is the colour other viewers show. Give the styled elements a `class` and no
`fill` in a `style` attribute. The second value is needed: always write it.
- The five variable names are the only ones. Another name (`--ic-bg`) is never defined: its second value is
drawn in every theme.
- Write `var(--ic-…)` inside the `<style>` element, not in a `fill="…"` or `stroke="…"` attribute: the app
does not look there, and with no other mention it defines no variables.
- The app writes the six classes on the root. Never write one of them on an element yourself.
- A sheet rule beats a colour written in a `fill` / `stroke` attribute; a colour in a `style` attribute beats
the sheet.
- Of two sheet rules of equal weight the later one wins: plain rules first, then `.ic-light` / `.ic-dark`
rules, then theme rules.
- Put these lines into the same `<style>` as the caption rules of section 4, when the picture has them.
### 6.2 Rules in an id
A rule = optional limits + a colour.
- Limits, at most one of each kind, any order: a theme (`sand` | `ocean` | `forest` | `dusk`); a version
(`light` | `dark`); a paint (`fill` | `stroke`). No limits = every theme, both versions, fill and stroke.
- Colour: one of the five names above, or your own colour as exactly six hex digits (`1e88e5`). Colour words
(`red`) are not colours in a rule. All rule words are English.
`id="ic-` + one or more rules, all words joined by hyphens, own colours without `#`:
- `ic-text` — the text colour everywhere;
- `ic-light-accent-dark-soft` — accent in light versions, soft in dark versions;
- `ic-dark-1e3a2a` — own colour in dark versions; as drawn in light versions;
- `ic-ocean-dark-c3ced4` — own colour in the dark version of Ocean only;
- `ic-stroke-accent` — accent on the outline only.
- `ic-fill-accent-stroke-text` — two rules in one id: accent inside, text colour on the outline.
Reading stops at the first character that is not an ASCII letter, digit or hyphen, and at the first word that
is not a rule word. So keep ids unique with a numeric suffix: `ic-text-2`, `ic-text-3`. A word of your own
ends the rules: `ic-moon-text` holds no rule. A six-letter word of hex digits (`facade`) is read as a colour.
What a rule does:
- The id may be on a shape, a `text`, or a group `g`. A rule on a group covers everything inside it, except
what is inside `defs`, a gradient, `mask`, `pattern`, `clipPath`, `marker`, `symbol` or `filter`.
- For each element, fill and stroke are chosen separately. Its own rule is used when one applies in the
current theme and version; otherwise the rule of the innermost enclosing group that has one that applies;
otherwise the colour stays as drawn.
- Among several rules of one element that apply: theme + version beats theme, theme beats version, version
beats no limit; then a rule with `fill` / `stroke` beats one without; then the first one written.
- The chosen colour replaces a plain colour written in the element's `fill` / `stroke` attribute or in its
`style` attribute. Left as written: `none`, `transparent`, `currentColor`, `inherit`, `url(…)` (gradients),
`var(…)`, and colours with their own alpha (`#rrggbbaa`, `#rgba`, `rgba(…)`, `hsla(…)`).
- A `path`, `rect`, `circle`, `ellipse`, `polygon`, `polyline`, `text` or `use` with no `fill` written gets
the chosen fill added. A `line` does not. A stroke is never added: a rule colours a stroke only where a
`stroke` with a plain colour is written on that element itself (not only on its group).
- So, to be safe: write `fill="#rrggbb"` (and `stroke="#rrggbb"` where there is an outline) on every element
that a rule should colour. These written colours are also what other SVG viewers show.
- A `stop-color` or `color` written on a covered element is replaced too (by the fill colour, else by the
stroke colour). A gradient with a rule in its own id has its stops recoloured.
- Theme rules are not applied to an SVG with more than 50,000 tags; it is drawn as written.
- Do not colour the same element both ways. When an element with a `class` has a rule — its own or its
group's — the app writes the rule's colour into the element's `style` attribute, which beats the sheet
(unless the sheet says `!important`): a group's rule so overrides the sheet colours of the classed shapes
inside it. On an element without a `class` the sheet wins wherever one of its selectors reaches it.
### 6.3 Other ways the app reads (do not use unless asked)
- A `<desc>` directly inside an element, beginning with `Intuition Check`, then one rule per line as
`limits: colour` (e.g. `dark stroke: text`, `light: #1e88e5`); a first-line form `Intuition Check: text`.
- Inkscape swatches (a one-colour gradient whose label or id holds rules).
### 6.4 If the user wants to edit the file in Inkscape later
Inkscape keeps both ways, in Inkscape SVG and in Plain SVG.
- A style sheet (6.1): Inkscape keeps the `<style>` element with the `var()` inside it. Write `var()` only
there, never in a `style` attribute (Inkscape removes such an attribute when the element is edited), and add
`!important` to every colour in the sheet (Inkscape writes colours into the element's `style` attribute,
which otherwise wins).
- Ids (6.2): Inkscape keeps ids. Labels are lost in Plain SVG.
## 7. Checklist — run before answering
For a set:
1. The answer is one code block holding one JSON object; it parses as strict JSON.
2. `"intuitionCheckSet": 1` is present; `name` is not empty.
3. `images` has 2 to 200 entries: exactly the number of pictures the user asked for, plus the cover if
there is one.
4. Every image has a non-empty `name` and an `svg` string.
5. In every `svg` string each `"` is written `\"`, and there is no raw line break.
6. Language codes are from section 3, spelled exactly. In a multilingual set every image and the set have
the same languages.
7. Captions follow section 4: none by default; one language only if asked, with `lang` on the `<text>`
two named languages: two lines, both shown, each with `lang`; three or more, or all, only if the user
named them or asked for all. Then: the default caption has `lang`; the codes in the hiding rule = the
codes in the showing rule = the codes on the captions, each on exactly one `<text>`; the same style sheet
in every picture but the cover; every image has `nameTranslations` with the same languages and words.
8. A cover only if asked: one picture with `"cover": true`, last, plus at least 2 other pictures.
9. The answer is whole: the JSON ends with its `}`, and no picture was shortened or left for later.
10. Beside the code block: the sentence on how to use it, and what you assumed (section 1).
For every SVG (in a set or alone):
11. Starts with `<svg`, has `xmlns="http://www.w3.org/2000/svg"` and `viewBox="0 0 W H"` in double quotes,
ends with `</svg>`.
12. Well-formed: all elements closed, `&` `<` `>` escaped in text.
13. None of: `script`, `foreignObject`, `a`, `style` with `@import`, `on…` attributes, `href` to anything
but `#id` or `data:image/…`, external fonts, HTML elements, nested `svg`, animation.
14. Far under 10,000,000 bytes.
15. The subject is large, simple, high-contrast; the picture differs clearly from every other picture of the
set; it is visible on a light and on a dark background; no caption crosses the drawing.
16. Theme rules only if asked; without them no id starts with `ic-` and the style sheet has no `.ic-` class
and no `--ic-` variable. With them: one method in the picture, the same in every picture of the set.
Style sheet: `<style>` itself holds a `--ic-` variable or one of the six classes (a `var()` only in a
`fill` attribute does nothing); the variable names are the five of section 6; every `var()` has a second
value. Ids: every word after `ic-` is a rule word; the element has its `fill` (and `stroke`) written.
Every fixed colour left on a themed plate was checked against the light and the dark values.
17. Ids are unique within the SVG.
## 8. Complete examples
### 8a. Minimal set, no captions
```json
{
"intuitionCheckSet": 1,
"name": "Shapes",
"images": [
{ "name": "Circle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"50\" r=\"30\" fill=\"#e53935\"/></svg>" },
{ "name": "Triangle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 18 L84 78 L16 78 Z\" fill=\"#1565c0\"/></svg>" }
]
}
```
### 8b. One picture with a caption in every language (section 4, option 4)
A star in a gold medallion with its caption in all 53 languages, built like the app's Zodiac set: the
"Theme" block turns the gold to bronze in light versions (section 6.1), the "Language" block picks the
caption, the "Lettering" block gives each script its font. Languages with the same word share a caption;
es-419 and fr-CA follow es and fr; a page with no language, or one not listed, shows the default caption,
"STAR" (the user's language is English here). The "Theme" block is not part of option 4: this medallion has
no plate, and its gold has to darken on a light background. Without a request for theme colours leave that
block out and draw an opaque plate (section 5, rule 8), as 8f does.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme. The app gives the root the classes ic-light or ic-dark (and ic-<theme>).
The gold is drawn for a dark background; on a light one it turns bronze. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
.ic-light .shadow-glyph { stroke-opacity: 0.27 }
/* Language. Every caption is in the file once; its class names the languages that
show it. The page's language (html lang) picks the caption; without a language,
or with one not listed here, the default one. fr-CA follows fr, es-419 follows es. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, bg, bn, ca, cs, da, de, el, es, fi, fr, gu, he, hi, hr, hu, id, it, ja, kk,
kn, ko, lt, ml, mr, ms, nb, nl, or, pa, pl, pt-BR, pt-PT, ro, ru, sk, sl, sv, ta,
te, th, tr, uk, ur, vi, zh-Hans, zh-Hant) .default { display: none }
:lang(ar) .ar, :lang(bg) .bg, :lang(bn) .bn, :lang(ca) .ca, :lang(cs) .cs, :lang(da) .da,
:lang(de) .de, :lang(el) .el, :lang(es) .es, :lang(fi) .fi, :lang(fr) .fr, :lang(gu) .gu,
:lang(he) .he, :lang(hi) .hi, :lang(hr) .hr, :lang(hu) .hu, :lang(id) .id, :lang(it) .it,
:lang(ja) .ja, :lang(kk) .kk, :lang(kn) .kn, :lang(ko) .ko, :lang(lt) .lt, :lang(ml) .ml,
:lang(mr) .mr, :lang(ms) .ms, :lang(nb) .nb, :lang(nl) .nl, :lang(or) .or, :lang(pa) .pa,
:lang(pl) .pl, :lang(pt-BR) .pt-BR, :lang(pt-PT) .pt-PT, :lang(ro) .ro, :lang(ru) .ru,
:lang(sk) .sk, :lang(sl) .sl, :lang(sv) .sv, :lang(ta) .ta, :lang(te) .te, :lang(th) .th,
:lang(tr) .tr, :lang(uk) .uk, :lang(ur) .ur, :lang(vi) .vi, :lang(zh-Hans) .zh-Hans,
:lang(zh-Hant) .zh-Hant
{ display: inline }
/* Lettering. A script whose letters join or stack gets no letter-spacing; every script
outside Latin, Cyrillic and Greek gets its own font. Telugu at 500: iOS has Kohinoor
Telugu only up to Medium, and WebKit would fake a 600 from it. */
.ar, .ur, .he, .bn, .gu, .hi, .mr, .kn, .ml, .or, .pa, .ta, .te, .th { letter-spacing: 0 }
.ar, .ur { font-family: system-ui, -apple-system, Geeza Pro, sans-serif }
.he { font-family: system-ui, -apple-system, Arial Hebrew, sans-serif }
.bn { font-family: Kohinoor Bangla, Bangla Sangam MN, sans-serif }
.gu { font-family: Kohinoor Gujarati, Gujarati Sangam MN, sans-serif }
.hi, .mr { font-family: Kohinoor Devanagari, Devanagari Sangam MN, sans-serif }
.kn { font-family: Noto Sans Kannada, Kannada Sangam MN, sans-serif }
.ml { font-family: Malayalam Sangam MN, Malayalam MN, sans-serif }
.or { font-family: Noto Sans Oriya, Oriya Sangam MN, sans-serif }
.pa { font-family: Mukta Mahee, Gurmukhi Sangam MN, sans-serif }
.ta { font-family: Tamil Sangam MN, InaiMathi, Tamil MN, sans-serif }
.te { font-family: Kohinoor Telugu, Telugu Sangam MN, sans-serif }
.th { font-family: Thonburi, Noto Sans Thai, sans-serif }
.ja { font-family: Hiragino Sans, Hiragino Kaku Gothic ProN, sans-serif }
.ko { font-family: Apple SD Gothic Neo, Noto Sans KR, sans-serif }
.zh-Hans { font-family: PingFang SC, Heiti SC, sans-serif }
.zh-Hant { font-family: PingFang TC, Heiti TC, sans-serif }
.te { font-weight: 500 }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The captions. Drawn twice at the end of the file: the shadow, then the gold. A long
word would carry its own smaller font-size and letter-spacing. Urdu says lang="ur" and is
drawn in Nastaliq. zh-Hans and zh-Hant keep two captions
with the same word: each takes its own font. -->
<g id="caption" class="caption" text-anchor="middle" font-family="Helvetica Neue, Helvetica, -apple-system, sans-serif" font-weight="600" font-size="52" letter-spacing="6.8">
<text class="default" x="259.4" y="466">STAR</text>
<text class="ar" x="259.4" y="466">نجمة</text>
<text class="bg ru" x="259.4" y="466">ЗВЕЗДА</text>
<text class="bn" x="259.4" y="466">তারা</text>
<text class="ca es" x="259.4" y="466">ESTRELLA</text>
<text class="cs" x="259.4" y="466">HVĚZDA</text>
<text class="da nb" x="259.4" y="466">STJERNE</text>
<text class="de" x="259.4" y="466">STERN</text>
<text class="el" x="259.4" y="466">ΑΣΤΕΡΙ</text>
<text class="fi" x="259.4" y="466">TÄHTI</text>
<text class="fr" x="259.4" y="466">ÉTOILE</text>
<text class="gu" x="259.4" y="466">તારો</text>
<text class="he" x="259.4" y="466">כוכב</text>
<text class="hi mr" x="259.4" y="466">तारा</text>
<text class="hr" x="259.4" y="466">ZVIJEZDA</text>
<text class="hu" x="259.4" y="466">CSILLAG</text>
<text class="id ms" x="259.4" y="466">BINTANG</text>
<text class="it" x="259.4" y="466">STELLA</text>
<text class="ja" x="259.4" y="466">星</text>
<text class="kk" x="259.4" y="466">ЖҰЛДЫЗ</text>
<text class="kn" x="259.4" y="466">ನಕ್ಷತ್ರ</text>
<text class="ko" x="259.4" y="466">별</text>
<text class="lt" x="259.4" y="466">ŽVAIGŽDĖ</text>
<text class="ml" x="259.4" y="466">നക്ഷത്രം</text>
<text class="nl" x="259.4" y="466">STER</text>
<text class="or" x="259.4" y="466">ତାରା</text>
<text class="pa" x="259.4" y="466">ਤਾਰਾ</text>
<text class="pl" x="259.4" y="466">GWIAZDA</text>
<text class="pt-BR pt-PT" x="259.4" y="466">ESTRELA</text>
<text class="ro" x="259.4" y="466">STEA</text>
<text class="sk" x="259.4" y="466">HVIEZDA</text>
<text class="sl" x="259.4" y="466">ZVEZDA</text>
<text class="sv" x="259.4" y="466">STJÄRNA</text>
<text class="ta" x="259.4" y="466">நட்சத்திரம்</text>
<text class="te" x="259.4" y="466">నక్షత్రం</text>
<text class="th" x="259.4" y="466">ดาว</text>
<text class="tr" x="259.4" y="466">YILDIZ</text>
<text class="uk" x="259.4" y="466">ЗІРКА</text>
<text class="ur" lang="ur" x="259.4" y="466">ستارہ</text>
<text class="vi" x="259.4" y="466">NGÔI SAO</text>
<text class="zh-Hans" x="259.4" y="466">星星</text>
<text class="zh-Hant" x="259.4" y="466">星星</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<path class="shadow-glyph" d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#0E0D22" stroke-width="19" stroke-linejoin="round" opacity="0.45" transform="translate(3,5)"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="url(#gold)" stroke-width="19" stroke-linejoin="round"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#FFF6DA" stroke-width="4.5" stroke-linejoin="round" opacity="0.4" transform="translate(-2,-3)"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
<use href="#caption" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(2,4)"/>
<use href="#caption" class="gold-text" fill="#CA9E41"/>
</svg>
```
In a set this SVG is the image's `svg` string (on one line, `"` written `\"`). The image's `name` and
`nameTranslations` carry the same words as the captions, in ordinary case ("Star", "Звезда", "Étoile", …).
Every picture of the set lists the same languages.
### 8c. The cover of the set in 8b
The same medallion with a question mark instead of the subject (section 2, "The cover"); in a set it gets
`"cover": true`. Two marks: `?`, and `؟` for Arabic and Urdu. A cover may show anything else the user asks
for; this one is what to draw when the user does not say.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme: the same rules as every picture of the set. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
/* Language. Two marks: "?" for every language, the Arabic question mark for Arabic and Urdu. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, ur) .default { display: none }
:lang(ar) .ar, :lang(ur) .ur
{ display: inline }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The question mark, where the other pictures have their subject. Drawn twice below: the
shadow, then the gold. The marks differ in shape (Arabic ؟ in Naskh, Urdu ؟ in Nastaliq), so
each has its own size and place: the same ink box as "?". -->
<g id="mark" class="caption" text-anchor="middle" font-family="system-ui, -apple-system, sans-serif" font-weight="bold">
<text class="default" x="258" y="323.8" font-size="323">?</text>
<text class="ar" lang="ar" x="254.2" y="329.6" font-size="294.1">؟</text>
<text class="ur" lang="ur" x="258.4" y="325.6" font-size="317.3">؟</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<use href="#mark" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(3,5)"/>
<use href="#mark" class="gold-text" fill="#E2C378"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
</svg>
```
### 8d. One SVG picture with theme colours (style sheet)
The plate takes the theme's surface colour, the moon the accent colour, soft in dark versions; the second
values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<style>
.plate { fill: var(--ic-surface, #dddddd) }
.moon { fill: var(--ic-accent, #e53935) }
.ic-dark .moon { fill: var(--ic-soft, #e53935) }
.cut { fill: var(--ic-surface, #dddddd) }
</style>
<rect class="plate" width="100" height="100" rx="12"/>
<circle class="moon" cx="46" cy="48" r="28"/>
<circle class="cut" cx="59" cy="39" r="23"/>
</svg>
```
### 8e. One SVG picture with theme colours (ids)
The plate takes the theme's surface colour, the house the text colour, the door the accent colour; the sun is
accent in light versions and soft in dark versions. The written `fill` values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<rect id="ic-surface" width="100" height="100" rx="12" fill="#eeeeee"/>
<g id="ic-text">
<path d="M16 52 L50 22 L84 52 Z" fill="#333333"/>
<rect x="26" y="52" width="48" height="30" fill="#333333"/>
</g>
<rect id="ic-accent" x="44" y="60" width="12" height="22" fill="#e53935"/>
<circle id="ic-light-accent-dark-soft" cx="82" cy="18" r="8" fill="#f9a825"/>
</svg>
```
### 8f. A small set with captions in three languages, and a cover
The user writes in English and asks for captions in English, German and Russian, and for a cover. The
default caption is the English word, so `en` is in no rule. Ordinary case, `sans-serif`, no letter-spacing;
the long Russian word has its own smaller size. Both pictures to guess have the same style sheet. The
cover's mark follows the app language, whatever the languages of the captions: `؟` in Arabic and Urdu, `?`
in every other. No theme rules: every picture has an opaque plate.
```json
{
"intuitionCheckSet": 1,
"name": "Simple shapes",
"nameTranslations": {"de": "Einfache Formen", "ru": "Простые фигуры"},
"images": [
{ "name": "Circle", "nameTranslations": {"de": "Kreis", "ru": "Круг"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"42\" r=\"28\" fill=\"#e53935\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Circle</text><text class=\"de\" x=\"50\" y=\"91\">Kreis</text><text class=\"ru\" x=\"50\" y=\"91\">Круг</text></g></svg>" },
{ "name": "Triangle", "nameTranslations": {"de": "Dreieck", "ru": "Треугольник"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 12 L82 70 L18 70 Z\" fill=\"#1565c0\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Triangle</text><text class=\"de\" x=\"50\" y=\"91\">Dreieck</text><text class=\"ru\" x=\"50\" y=\"91\" font-size=\"10.5\">Треугольник</text></g></svg>" },
{ "name": "Question mark", "nameTranslations": {"de": "Fragezeichen", "ru": "Знак вопроса"}, "cover": true, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(ar,ur) .default{display:none}:lang(ar) .ar,:lang(ur) .ur{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#eeeeee\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"system-ui, -apple-system, sans-serif\" font-weight=\"bold\" fill=\"#555555\"><text class=\"default\" x=\"50.4\" y=\"72.4\" font-size=\"64\">?</text><text class=\"ar\" lang=\"ar\" x=\"49.6\" y=\"73.7\" font-size=\"58\">؟</text><text class=\"ur\" lang=\"ur\" x=\"50.5\" y=\"72.8\" font-size=\"62.9\">؟</text></g></svg>" }
]
}
```
Contenido
Guías breves de lo principal que puedes hacer en Intuition Check y de cómo ponerte en contacto con nosotros.
- Intuición
- Cómo funciona la app
- Conjuntos para adivinar
- Enviar conjuntos
- Juego con compañero
- Estadísticas
- Cómo leer tus resultados
- Tu estado
- Aspecto y funciones
- Hora gratis y suscripción
- Tus datos
- Tus propios conjuntos creados con IA
- Historial de versiones
- Política de privacidad
Si algo no funciona
Escríbenos a [email protected] y te responderemos. La forma más rápida es Configuración → Acerca de → Contactar al soporte: abre en tu app de correo un borrador que ya incluye la versión y la compilación de la app, el modelo de tu dispositivo y tu versión de iOS.
No hay formulario de soporte ni sistema de tickets. La app no recopila nada, así que todo lo que necesitemos saber tiene que venir de ti.
Qué incluir en tu mensaje
- Qué hiciste, qué esperabas y qué pasó en realidad.
- La versión de la app, en Configuración → Acerca de → Versión.
- El modelo de tu dispositivo y tu versión de iOS.
Un borrador creado con “Contactar al soporte” ya incluye la versión, el modelo y la versión de iOS.
Solución de problemas
- Los dos dispositivos no se encuentran: Si los dispositivos no se encuentran.
- Las estadísticas desaparecieron al volver a abrir la app: Conservar tus estadísticas.
- No aparece nada en las estadísticas: Qué se registra.
- Falta un conjunto en el selector: El selector de conjuntos.
Fuentes
- Kahneman, D., & Klein, G. (2009). American Psychologist, 64(6), 515–526. Conditions for intuitive expertise: A failure to disagree [Condiciones para la pericia intuitiva: un desacuerdo fallido]
Una revisión conjunta de dos destacados investigadores de la intuición, de escuelas opuestas, en la revista de la Asociación Americana de Psicología.
https://doi.org/10.1037/a0016755 - Cardeña, E. (2018). American Psychologist, 73(5), 663–677. The experimental evidence for parapsychological phenomena: A review [Las pruebas experimentales de los fenómenos parapsicológicos: una revisión]
Una revisión de muchos estudios, escrita por un psicólogo que considera sólidas las pruebas, en la revista de la Asociación Americana de Psicología.
https://doi.org/10.1037/amp0000236 - Reber, A. S., & Alcock, J. E. (2020). American Psychologist, 75(3), 391–399. Searching for the impossible: Parapsychology's elusive quest [En busca de lo imposible: la esquiva meta de la parapsicología]
La réplica a la revisión anterior, de dos psicólogos que rechazan estos efectos, en la misma revista.
https://doi.org/10.1037/amp0000486 - Sheldrake, R. (2000). Journal of the Society for Psychical Research, 64, 224–232. Telepathic telephone calls: Two surveys [Llamadas telefónicas telepáticas: dos encuestas]
Encuestas telefónicas a hogares elegidos al azar en Londres y en Bury (Inglaterra), realizadas por un investigador que sostiene que la telepatía existe, en una revista de parapsicología.
https://www.sheldrake.org/files/pdfs/papers/Telepathic-Telephone-Calls-Two-Surveys.pdf - Brown, D. J., & Sheldrake, R. (2001). Journal of Parapsychology, 65, 145–156. The anticipation of telephone calls: A survey in California [La anticipación de las llamadas telefónicas: una encuesta en California]
Una encuesta telefónica a 200 personas elegidas al azar, del mismo investigador y un coautor, en una revista de parapsicología.
https://www.sheldrake.org/files/pdfs/papers/The-Anticipation-of-Telephone-Calls-A-Survey-in-California.pdf - Cottrell, J. E., Winer, G. A., & Smith, M. C. (1996). Developmental Psychology, 32(1), 50–61. Beliefs of children and adults about feeling stares of unseen others [Creencias de niños y adultos sobre sentir la mirada de otros a los que no se ve]
Tres estudios con niños y adultos, en una revista de la Asociación Americana de Psicología.
https://doi.org/10.1037/0012-1649.32.1.50 - Born, J., Hansen, K., Marshall, L., Mölle, M., & Fehm, H. L. (1999). Nature, 397, 29–30. Timing the end of nocturnal sleep [Programar el final del sueño nocturno]
Un experimento con 15 voluntarios, en la revista Nature.
https://doi.org/10.1038/16166 - Sio, U. N., & Ormerod, T. C. (2009). Psychological Bulletin, 135(1), 94–120. Does incubation enhance problem solving? A meta-analytic review [¿Mejora la incubación la resolución de problemas? Una revisión metaanalítica]
Una revisión que combina los resultados de muchos experimentos, en una revista de la Asociación Americana de Psicología.
https://doi.org/10.1037/a0014212 - Wagner, U., Gais, S., Haider, H., Verleger, R., & Born, J. (2004). Nature, 427, 352–355. Sleep inspires insight [El sueño inspira la comprensión súbita]
Un experimento en la revista Nature; repeticiones posteriores dieron resultados dispares.
https://doi.org/10.1038/nature02223 - Ambady, N., & Rosenthal, R. (1993). Journal of Personality and Social Psychology, 64(3), 431–441. Half a minute: Predicting teacher evaluations from thin slices of nonverbal behavior and physical attractiveness [Medio minuto: predecir las evaluaciones de profesores a partir de breves fragmentos de conducta no verbal y del atractivo físico]
Tres estudios — el principal, con 13 profesores — en una revista de la Asociación Americana de Psicología.
https://doi.org/10.1037/0022-3514.64.3.431 - Diaconis, P., & Mosteller, F. (1989). Journal of the American Statistical Association, 84(408), 853–861. Methods for studying coincidences [Métodos para estudiar las coincidencias]
Un artículo de dos estadísticos sobre cómo se producen las coincidencias, en la revista de la Asociación Americana de Estadística.
https://doi.org/10.1080/01621459.1989.10478847 - Wilson, T. D., Lisle, D. J., Schooler, J. W., Hodges, S. D., Klaaren, K. J., & LaFleur, S. J. (1993). Personality and Social Psychology Bulletin, 19(3), 331–339. Introspecting about reasons can reduce post-choice satisfaction [Reflexionar sobre los motivos puede reducir la satisfacción tras una elección]
Un experimento, en una revista de psicología social.
https://doi.org/10.1177/0146167293193010 - Dunn, B. D., Galton, H. C., Morgan, R., Evans, D., Oliver, C., Meyer, M., Cusack, R., Lawrence, A. D., & Dalgleish, T. (2010). Psychological Science, 21(12), 1835–1844. Listening to your heart: How interoception shapes emotion experience and intuitive decision making [Escuchar a tu corazón: cómo la interocepción moldea la experiencia emocional y la toma de decisiones intuitiva]
Dos experimentos, en una revista de la Asociación para la Ciencia Psicológica.
https://doi.org/10.1177/0956797610389191
Créditos
Ilustraciones de las cartas, obra de Adrian Kennard, publicadas bajo CC0 Public Domain. Generador y código fuente en me.uk/cards.