Intuition Check
Uma aplicação simples, que respeita a sua privacidade, para testar e treinar a sua intuição, no iPhone, no iPad e em computadores Mac com processador Apple. Exercite o seu instinto com cartas de jogar, números ou imagens – a solo ou com um parceiro por perto.
Descarregar na App Store → Os seus próprios conjuntos criados com IA →Intuição
O que é a intuição
A intuição é saber alguma coisa sem conseguir dizer como se sabe: um palpite, um pressentimento, uma certeza repentina.
Os psicólogos descrevem bem um tipo de intuição – a experiência que atua mais depressa do que o pensamento. Quem já fez uma coisa muitas vezes repara num padrão antes de o conseguir pôr em palavras: primeiro vem a sensação, as palavras vêm depois.1
Muitas pessoas descrevem também um segundo tipo: saber algo que nenhuma experiência vivida lhes poderia ter dito – quem está a ligar antes de o telefone mostrar um nome, ou qual é a carta que está virada para baixo. A existência deste tipo é tema de debate na ciência.23 É este segundo tipo que a aplicação lhe permite testar, com valores escolhidos ao acaso.
Como se pode manifestar
Muitas pessoas conhecem momentos como estes:
- Pensa em alguém e, um momento depois, essa pessoa liga-lhe.
- Pega no telefone para ligar a um amigo e o telefone toca-lhe na mão – é esse mesmo amigo.
- Acorda um par de minutos antes de o despertador tocar.
- Sabe quem está a ligar antes de olhar para o ecrã.
- Lembra-se de alguém que não vê há muito tempo e essa pessoa liga-lhe nesse mesmo dia.
- A primeira impressão que tem de uma pessoa acaba por estar certa.
- A solução para um problema aparece sozinha – de manhã, no duche, durante um passeio.
- Sente que alguém está a olhar para si, vira-se e há mesmo alguém a olhar.
Em inquéritos telefónicos a pessoas escolhidas ao acaso em Inglaterra e na Califórnia, entre 65% e 78% afirmaram ter ligado a alguém que lhes disse que estava mesmo para lhes ligar, e 47–49% afirmaram ter sabido quem estava a ligar sem qualquer pista.45 A maioria dos adultos acredita que consegue sentir quando alguém que não está à vista olha para eles.6
Alguns destes casos têm uma explicação conhecida. O corpo consegue ter noção da hora a que conta acordar: numa experiência, uma hormona que prepara o corpo para acordar começou a subir cerca de uma hora antes da hora a que tinham dito às pessoas que as iam acordar.7 Uma pausa pode ajudar a resolver um problema: em muitas experiências, as pessoas resolveram melhor os problemas depois de os porem de lado durante algum tempo,8 e, num estudo, uma noite de sono mais do que duplicou a proporção de pessoas que descobriram uma regra escondida que tornava uma tarefa mais rápida de resolver.9 E uma primeira impressão pode ser exata: desconhecidos que observaram um professor durante 30 segundos no total, sem som, avaliaram-no de forma muito parecida com a avaliação que os alunos desse professor fizeram no fim do semestre.10
Uma vez, duas – ou repetidas vezes
Uma ou duas vezes, uma coincidência destas é fácil de atribuir ao acaso. Quando acontece repetidas vezes, é natural perguntar se haverá algo mais por trás disso.
Neste ponto, a memória faz mal as contas. Guarda as vezes em que o telefone tocou e esquece as muitas vezes em que pensou em alguém e nada aconteceu. E, com dias, pessoas e pensamentos suficientes, é inevitável que, de vez em quando, aconteçam coincidências impressionantes.11
Por isso, vale a pena contar. Nesta aplicação, sabe-se exatamente com que frequência se acertaria por puro acaso: depende apenas de quantos valores podem ser sorteados. As estatísticas mostram se os seus resultados ficam dentro do que o acaso daria ou se se afastam disso – consulte Como ler os seus resultados.
A intuição no dia a dia
Os sentimentos e os sinais do corpo participam em muitas decisões. As pessoas que simplesmente escolheram o póster de que gostavam estavam mais satisfeitas com ele três semanas depois do que aquelas a quem primeiro se pediu que enumerassem as razões pelas quais gostavam ou não de cada póster.12 Noutra experiência, as pessoas jogaram um jogo de cartas com quatro baralhos: com o tempo, dois dos baralhos faziam ganhar e dois faziam perder, mas não se disse aos jogadores quais eram. O corpo reagia antes de a pessoa tirar cada carta, e estes sinais pendiam para lados diferentes em pessoas diferentes: de um modo geral, numas para os baralhos que faziam ganhar e noutras para os que faziam perder. Os investigadores avaliaram até que ponto cada pessoa sentia os sinais do seu corpo pela exatidão com que conseguia sentir o bater do próprio coração. Quanto mais exata era essa sensação, mais de perto as escolhas da pessoa seguiam os sinais do corpo – para o bem ou para o mal.13
A intuição é mais fiável onde há padrões reais em que se apoiar e onde se percebe depressa e com clareza se se acertou. Uma forte sensação de certeza não é, por si só, sinal de que se tem razão.1
Por isso, estar em bom contacto com a sua intuição significa duas coisas: reparar nela e aprender quando se pode confiar nela. Para aprender quando se pode confiar nela, anote o seu estado enquanto joga: as estatísticas comparam então as suas rondas por estado e por período do dia, e assim pode ver quando se sai melhor. Consulte O seu estado.
Haverá algo mais por trás disto?
A ciência não esclareceu se as pessoas conseguem saber aquilo que nenhuma experiência vivida lhes poderia dizer. Em 2018, uma revisão publicada na principal revista da Associação Americana de Psicologia concluiu que as provas a favor destes efeitos são aproximadamente tão fortes como as que sustentam resultados aceites em psicologia.2 Uma resposta publicada na mesma revista defendeu que estes efeitos são impossíveis e que os resultados têm de ter outras causas.3 A questão continua em aberto, e a aplicação permite-lhe examiná-la com as suas próprias rondas.
Como funciona a aplicação
Uma ronda
Escolha um conjunto para adivinhar – cartas de jogar, números ou um conjunto de imagens – e tente sentir um valor antes de ser mostrado. Depois, revele-o e veja se acertou. A aplicação conta os seus acertos e compara-os com o que o puro acaso daria.
Intuição passiva e ativa
A aplicação tem dois modos:
- Intuição passiva – o valor já está escolhido e oculto. Tente ler qual é.
- Intuição ativa – nada está escolhido até revelar o valor. Tente fazer surgir um valor pela sua vontade.
As estatísticas mantêm os dois modos separados, para que possa ver qual dos dois lhe convém mais.
Três formas de jogar
Os seletores na parte de cima da vista principal servem para escolher o estilo de jogo e o modo. As mesmas opções estão em Definições → Estilo de jogo e modo.
Um a um
Um valor de cada vez. Toque para o revelar, toque outra vez para o ocultar e depois revele o seguinte. Com a opção “Revelar sem ocultar” ativa em Definições → Um a um, cada toque mostra logo o valor seguinte. A opção “Mostrar a dica” acrescenta uma linha de orientação por baixo do valor.
Se a definição “Método” do registo de palpites estiver em “Indicar o seu palpite” – como acontece de início –, antes de cada revelação a aplicação pede o seu palpite e marca ela própria o resultado da ronda. Consulte O que é registado.
Escolha rápida
Todos os valores do conjunto ficam dispostos numa só grelha. Cada toque é uma ronda à parte. No modo ativo, o valor é sorteado no momento em que toca; no modo passivo, é sorteado com antecedência, logo a seguir ao toque anterior. Um acerto pode ser assinalado com um brilho verde e uma vibração.
Os conjuntos de números com mais de 1000 valores não têm grelha: reduza o intervalo nas definições do conjunto ou jogue no estilo “Um a um”.
Série
No modo ativo, escolha o valor que pretende, concentre nele a sua vontade e toque nele: a aplicação sorteia uma série de valores e conta quantos deles coincidem com o valor em que tocou. Uma série pode ter de 2 a 12 sorteios, ou 100, 1000, 10 000, 100 000, 1 milhão ou 10 milhões. O tamanho da série define-se na vista principal. Em Definições → Série, o nivelador “Duração da série” distribui os sorteios por um período de até 10 segundos; no zero, não há pausas. Cada série entra nas estatísticas como um único registo.
Ao escolher o estilo “Série”, o modo muda para intuição ativa.
Cartas de jogar e números
Um conjunto de cartas de jogar usa um baralho de 36 ou 52 cartas, com ou sem jóqueres. Um conjunto de números usa números com até 9 algarismos – o número máximo de algarismos é escolhido por si. Pode alterar ambos na vista das definições do conjunto para adivinhar: na vista principal, toque na engrenagem ao lado do seletor de conjuntos.
Vista limpa
Mantenha o dedo em qualquer ponto da vista principal para ocultar os seletores, a barra de ferramentas, a barra de estados e a dica. Mantenha premido outra vez para os voltar a mostrar. As contagens de rondas e o resultado mantêm-se visíveis.
Em Definições → Apresentação e avisos, no grupo “Vista limpa”, a opção “Mostrar o botão” acrescenta um botão com um olho à barra de ferramentas – toque nele para ativar a vista limpa – e a opção “Lembrar a vista limpa” mantém a vista limpa ativa de uma abertura da aplicação para a seguinte.
Contagens de rondas
A vista principal pode mostrar quantas rondas jogou e como se está a sair: uma contagem e um resultado para cada combinação de modo e estilo de jogo, com um botão que repõe a contagem e limpa o resultado. Mudar para outro conjunto para adivinhar também repõe todas as contagens e todos os resultados.
Para manter as contagens de rondas e os resultados de uma abertura da aplicação para a seguinte, ative a opção “Guardar contagens de rondas e resultados” em Definições → Estatísticas. Esta opção está disponível enquanto a opção “Guardar as estatísticas no dispositivo” estiver ativa.
Conjuntos para adivinhar
Um conjunto para adivinhar é aquilo de onde saem os valores a adivinhar: cartas de jogar, números ou um conjunto de imagens. De início, a vista principal mostra apenas “Números” e “Cartas de jogar”. Pode adicionar os outros conjuntos que vêm com a aplicação tocando em ao lado do seletor de conjuntos, na vista principal.
O seletor de conjuntos
O seletor na parte de cima da vista principal mostra os seus conjuntos para adivinhar. Com o valor predefinido da definição “Estilo do seletor”, mostra botões quando tem um ou dois conjuntos a apresentar e, a partir de três, o nome do conjunto atual, que abre uma lista dos conjuntos. Com a opção “Vista separada” escolhida em “Estilo do seletor”, o seletor abre sempre esta lista.
Cada conjunto tem a sua própria opção “Usar”. Um conjunto com esta opção desativada não aparece em lado nenhum – nem no seletor de conjuntos da vista principal, nem no jogo com parceiro, nem nas estatísticas –, mas continua na sua lista de conjuntos em Definições → Conjuntos para adivinhar → Gerir conjuntos para adivinhar, e voltar a ativar a opção traz de volta as estatísticas do conjunto.
O botão ao lado do seletor de conjuntos abre a vista “Adicionar conjunto”. Esta vista mostra os conjuntos extra que vêm com a aplicação, prontos a adicionar à vista principal; por baixo deles há um botão para criar um conjunto vazio, ao qual pode depois adicionar as suas próprias imagens, e o bloco “O seu assistente de IA”, para adicionar um conjunto criado por um assistente de IA. O botão de engrenagem ao lado do seletor de conjuntos abre as definições do conjunto selecionado no momento. Ambos os botões podem ser ocultados em Definições → Conjuntos para adivinhar, com as opções “Mostrar o botão de adicionar conjunto” e “Mostrar o botão de definições do conjunto”.
Conjuntos prontos
Toque em ao lado do seletor de conjuntos, na vista principal – ou abra Definições → Conjuntos para adivinhar → Gerir conjuntos para adivinhar, toque em e escolha “Conjuntos prontos”. Abra um conjunto e toque em “Adicionar aos meus conjuntos para adivinhar”.
O conjunto que adiciona é a sua própria cópia: pode alterar-lhe o nome, mudar a ordem das imagens, deixar algumas de fora do jogo, usá-lo para jogar com um parceiro ou enviá-lo a alguém.
Um conjunto com as suas próprias imagens
A partir da vista principal: toque em ao lado do seletor e depois em “Conjunto de imagens vazio”, por baixo dos conjuntos prontos. Mantenha o nome “As minhas imagens” ou escreva outro e toque em “Criar”. A aplicação muda para o novo conjunto e abre-o.
Ou abra Definições → Conjuntos para adivinhar → Gerir conjuntos para adivinhar, toque em e escolha “Conjunto de imagens vazio”; depois, dê um nome ao conjunto e toque em “Criar”. O novo conjunto abre-se.
Dentro do conjunto, toque em e adicione imagens de “Fotografias” ou de “Ficheiros” – várias de cada vez –, tire-as uma a uma com a “Câmara” ou cole uma imagem ou um SVG que tenha copiado, com “Colar do clipboard”.
Nomes das imagens
Toque numa imagem na vista do próprio conjunto para a ver em tamanho maior. O campo por baixo dela é o “Nome”: escreva um nome, altere-o ou limpe-o. Uma imagem adicionada a partir de “Ficheiros” começa com o nome do ficheiro sem a extensão; uma de “Fotografias” ou da “Câmara”, ou uma colada com “Colar do clipboard”, começa sem nome. Num conjunto com nomes em vários idiomas, “Nomes por idioma”, por baixo do campo, guarda o nome da imagem em cada um deles. Por baixo da imagem, vê o formato e o tamanho do ficheiro que a aplicação guarda.
Um assistente de IA pode criar imagens e conjuntos inteiros para si: Os seus próprios conjuntos criados com IA.
Ordem, disposição e o que entra no jogo
Na vista do próprio conjunto, “Organizar” permite-lhe arrastar as imagens para uma nova ordem e escolher, para a grelha, “Imagens por linha”, “Alinhamento” e “Mostrar por inteiro”.
Mantenha o dedo numa imagem para ver mais opções:
- “Não usar no jogo” mantém a imagem no conjunto, mas ela nunca é sorteada. “Usar no jogo” volta a pô-la em jogo.
- A opção Marcar como substituto “?” mostra essa imagem enquanto um valor ainda está oculto no estilo “Um a um”. A própria imagem nunca é sorteada. Cada conjunto só pode ter um substituto “?”.
Alterar o nome e apagar
O nome do conjunto é o primeiro campo na respetiva vista. Nos conjuntos prontos, alterá-lo muda o nome no idioma atual da aplicação; os nomes nos outros idiomas estão em “Nomes por idioma”.
Para apagar um conjunto, passe o dedo sobre ele na sua lista de conjuntos em Definições → Conjuntos para adivinhar → Gerir conjuntos para adivinhar, ou mantenha o dedo nele, e escolha “Apagar”. A aplicação pede confirmação primeiro. As estatísticas do conjunto são apagadas juntamente com ele.
Enviar conjuntos
Enviar um conjunto
Um conjunto com as suas próprias imagens pode ser enviado como um único ficheiro com a extensão .guesset. O ficheiro contém as imagens, a respetiva ordem, a disposição e os nomes do conjunto, e também que imagens entram no jogo e qual é o substituto “?”. Os conjuntos “Cartas de jogar” e “Números” fazem parte da aplicação e não podem ser enviados.
- Abra Definições → Conjuntos para adivinhar → Gerir conjuntos para adivinhar.
- Mantenha o dedo no conjunto e escolha “Exportar…”. O botão de partilha dentro do conjunto faz o mesmo.
- Escolha como o enviar: Mail, Mensagens, AirDrop, Ficheiros ou outra aplicação.
Para usar um conjunto num jogo com alguém que está por perto, não precisa de ficheiro: consulte Jogar com as suas próprias imagens.
Abrir um conjunto que alguém lhe enviou
Toque num ficheiro .guesset na aplicação Mail, Mensagens ou Ficheiros, ou aceite um que lhe tenham enviado por AirDrop, e abra-o com o Intuition Check. Passa a ser uma cópia independente, só sua, e aparece no fim da sua lista e no seletor.
Um ficheiro que já esteja guardado no dispositivo também pode ser importado a partir da própria aplicação: em Definições → Conjuntos para adivinhar → Gerir conjuntos para adivinhar, toque em e escolha “Importar de um ficheiro”.
Jogo com parceiro
Como funciona
Dois dispositivos jogam juntos: uma pessoa escolhe um valor e a outra tenta adivinhá-lo. Os dispositivos comunicam apenas entre si (de dispositivo para dispositivo, quando estão perto, ou através de uma rede Wi‑Fi partilhada). As rondas do jogo com parceiro não entram nas estatísticas.
A ligação
Ative o Wi‑Fi nos dois dispositivos. Na mesma rede Wi‑Fi, a ligação funciona melhor e os dispositivos podem então estar em qualquer ponto dessa rede. Sem uma rede em comum, ligam-se de dispositivo para dispositivo – mantenha-os perto um do outro.
Os dispositivos só se procuram um ao outro enquanto o jogo com parceiro está aberto nos dois.
Começar
- Nos dois dispositivos, abra o jogo com parceiro: toque no botão com duas pessoas na barra de ferramentas da vista principal ou toque em “Abrir o jogo com parceiro” em Definições → Jogo com parceiro. Se o botão não aparecer, ative a opção “Mostrar o botão do jogo com parceiro” em Definições → Jogo com parceiro.
- Cada dispositivo mostra “A procurar um parceiro por perto…” e, a seguir, o outro dispositivo por baixo de “Detetados por perto:”. Ligam-se automaticamente.
Na primeira vez, o seu dispositivo pergunta se a aplicação pode encontrar dispositivos na sua rede local. Permita o acesso: sem ele, os dispositivos não se conseguem encontrar.
Uma ronda
- Em “Jogar com:”, escolha com o que jogar – qualquer um dos seus conjuntos para adivinhar em uso.
- Escolha um papel: “Vou escolher uma carta” (ou um número, ou uma imagem) ou “Vou tentar adivinhar”. O parceiro fica com o outro papel.
- Quem escolhe seleciona um valor e quem adivinha dá um palpite. Depois, os dois dispositivos mostram o valor escolhido e o valor do palpite, com “Correto!” ou “Não foi desta vez”.
- “Jogar outra vez” leva os dois dispositivos de volta ao primeiro passo, para escolher com o que jogar e os papéis da próxima ronda.
Jogar com as suas próprias imagens
Quando joga com um dos seus conjuntos de imagens, é pedido primeiro ao parceiro que o descarregue com o botão “Descarregar”, a não ser que já tenha o mesmo conjunto. A cópia que ele recebe só é usada no jogo com parceiro e nunca altera os conjuntos dele. Só são enviadas as imagens que o parceiro ainda não tem.
Com a opção “Manter os conjuntos de imagens recebidos” ativada em Definições → Jogo com parceiro, o jogo seguinte com o mesmo parceiro começa sem ter de esperar. Com a opção desativada, os conjuntos recebidos são apagados quando sai do jogo com parceiro. Os conjuntos recebidos aparecem em Definições → Conjuntos para adivinhar → Gerir conjuntos para adivinhar, na secção “Recebidos do parceiro”, onde “Adicionar aos meus conjuntos para adivinhar” cria uma cópia que é totalmente sua.
O nome do parceiro
No iPhone e no iPad, as aplicações só veem um nome genérico do dispositivo, como “iPhone”, por isso dois dispositivos podem parecer iguais. Depois de estabelecida a ligação, toque no lápis ao lado do nome do parceiro e escreva um nome à sua escolha. Esse nome só é mostrado no seu dispositivo.
Se os dispositivos não se encontrarem
- Abra o jogo com parceiro nos dois dispositivos, com o Wi‑Fi ativado.
- Ligue os dois dispositivos à mesma rede Wi‑Fi, se puder; caso contrário, mantenha-os perto um do outro.
- As redes de convidados e as redes públicas – em hotéis, cafés, escritórios – bloqueiam muitas vezes o tráfego entre dispositivos. Experimente outra rede ou mesmo nenhuma rede, com os dispositivos lado a lado.
- Se recusou o pedido de acesso à rede local, volte a ativar o acesso na aplicação Definições: Privacidade e segurança → Rede local e, depois, ative o Intuition Check.
- Se um dispositivo aparecer por baixo de “Detetados por perto:” mas nunca se ligar, saia do jogo com parceiro nos dois dispositivos e volte a abri-lo: a procura recomeça do zero.
- Jogam apenas dois dispositivos de cada vez. Um terceiro continua à procura até um dos dois sair.
Estatísticas
O que é registado
Os estilos de jogo “Escolha rápida” e “Série” registam sempre as suas rondas. O estilo “Um a um” regista-as de acordo com a definição “Método” do grupo “Registo de palpites”, em Definições → Um a um:
- “Indicar o seu palpite” – a opção predefinida. Indica o seu palpite antes da revelação, e é a aplicação que avalia a ronda.
- “Marcar manualmente” – após cada revelação, toque em ✓ ou ✗. Uma revelação que passar sem marcar não é contada.
- “Não” – o estilo “Um a um” não regista nada.
Um conjunto para adivinhar com um único valor possível não regista nada. As rondas do jogo com parceiro nunca são registadas.
Ver as suas estatísticas
Toque no botão das estatísticas na barra de ferramentas da vista principal ou toque em “Ver estatísticas” em Definições → Estatísticas. As estatísticas abrem com o conjunto para adivinhar, o estilo de jogo e o modo com que está a jogar. Os filtros no topo permitem restringi-las por “Período”, “Conjunto para adivinhar”, “Estilo de jogo”, “Modo” e – enquanto anotar o seu estado – “Estado”.
As secções de que não precisa podem ser desativadas na vista das definições das estatísticas – abra-a com o botão de definições na vista das estatísticas ou, a partir da vista principal, em Definições → Estatísticas.
O que significam os números: Como ler os seus resultados.
Guardar as suas estatísticas
De início, as estatísticas ficam apenas na memória, durante a sessão atual: são descartadas quando a aplicação fecha, incluindo quando é o iOS a fechá-la em segundo plano. Para as manter, ative a opção “Guardar as estatísticas no dispositivo” – no topo da vista das estatísticas ou em Definições → Estatísticas. As rondas da sessão atual também são guardadas. As rondas de sessões anteriores da aplicação que nunca foram guardadas não podem ser recuperadas.
Desativar a opção apaga as estatísticas guardadas. A aplicação pergunta primeiro, com “Deixar de guardar as estatísticas?”; depois de tocar em “Apagar as estatísticas guardadas”, ficam apenas as rondas jogadas desde a última vez que a aplicação foi aberta, e apenas na memória: desaparecem quando a aplicação for fechada. Esta ação é irreversível.
Limpar
No fundo da vista das estatísticas:
- Limpar todas as estatísticas de “…” – todas as estatísticas registadas com o conjunto para adivinhar escolhido no filtro.
- “Apagar os registos filtrados das estatísticas (quantidade: …)” – apenas os registos que os filtros mostram.
- “Limpar todas as estatísticas” – tudo.
A aplicação pede-lhe que confirme cada uma destas ações, e todas são irreversíveis.
Exportar
Toque no botão de partilha na barra de ferramentas da vista das estatísticas e, depois, em “Exportar estatísticas para um ficheiro de texto”. O ficheiro é uma tabela (CSV) com exatamente os registos que os seus filtros mostram: uma linha por ronda ou, no estilo de jogo “Série”, uma por série. As aplicações de folha de cálculo, como o Numbers, conseguem abri-lo. Também lhe pode ser útil mostrar este ficheiro ao seu assistente de IA e perguntar, por exemplo: “Em que circunstâncias é que a minha intuição parece funcionar melhor ou pior?”
Como ler os seus resultados
As estatísticas não se limitam a contar acertos. Comparam os seus resultados com o que palpites aleatórios obteriam com o mesmo número de valores possíveis e dizem, em palavras simples, se está acima do acaso, abaixo dele ou ao nível dele.
O seu resultado e o acaso
Em “Palpites corretos”, “O seu resultado” aparece ao lado de “O acaso obteria”. Os mesmos 30% podem significar coisas opostas: com 3 valores possíveis, os palpites aleatórios obtêm cerca de 33%, por isso 30% fica um pouco abaixo do acaso; com um baralho de 52 cartas, obtêm cerca de 2%, por isso 30% fica muito acima dele. A taxa esperada pelo acaso é calculada com o número de valores possíveis de cada ronda.
O veredicto
A aplicação dá um veredicto: desde “Compatível com o acaso”, passando por ligeiramente e claramente acima ou abaixo do acaso, até “Muito acima do acaso” ou “Muito abaixo do acaso”. Também diz quão raro seria um resultado destes com palpites aleatórios, por exemplo “cerca de 1 vez em cada 300”.
Com poucas rondas, os resultados oscilam muito só por obra do acaso. Por isso, o veredicto torna-se mais estável a cada nova ronda.
Comparação entre a intuição passiva e a ativa
Quando tem rondas nos dois modos, a secção “Intuição passiva e ativa” mostra os acertos e a taxa de acerto de cada um, para que possa ver qual deles lhe corre melhor. Esta secção não aparece no estilo “Série”.
Melhores sequências
“Melhores sequências” mostra as suas sequências mais longas de palpites corretos seguidos, com o dia e a hora e o estado que tinha anotado. Uma sequência termina quando há uma pausa mais longa do que a indicada em “Pausa máx. entre rondas” – que define nessa mesma secção – ou quando o estado anotado muda.
Ao longo do tempo
“Taxa de acerto ao longo do tempo” traça a sua taxa de acerto diária assim que tiver rondas em dois dias diferentes. “Por período do dia” mostra a manhã, a tarde, a noite e a madrugada em separado.
Valores
Quando as estatísticas dizem respeito a um só conjunto para adivinhar com até 100 valores, indicam os valores em que acertou mais vezes e os valores que escolhe como palpite com mais e com menos frequência – incluindo os que nunca escolhe, assim que tiver dado tantos palpites quantos os valores do conjunto.
Muitas vezes, as pessoas inclinam-se para alguns valores e evitam outros, e alguns valores podem ser adivinhados corretamente mais vezes do que outros.
Os resultados podem variar
Os seus resultados podem mudar com o seu estado e as suas circunstâncias. Nada do que se segue é um facto estabelecido – são possibilidades que vale a pena observar enquanto joga:
- O seu estado. Pode ter resultados diferentes logo depois de acordar ou tarde da noite, em momentos de vigor ou de cansaço, de calma ou de stress. Anote o seu estado enquanto joga, e as estatísticas comparam as suas rondas por estado e por período do dia.
- Autoconfiança. Sentir-se confiante ou, pelo contrário, com muitas dúvidas pode coincidir com os seus resultados.
- Abaixo do acaso também conta. Acertar visivelmente menos vezes do que o acaso faria prever também é um desvio em relação ao acaso. Uma leitura possível é que, nesse momento, a intuição esteja a trabalhar contra si, e não que nada esteja a acontecer.
- Valores. Pode acertar em alguns valores muito mais vezes do que noutros, e em alguns pode nunca chegar a acertar, mesmo que os escolha com a mesma frequência que os restantes.
O que os números podem dizer
A aplicação pode dizer-lhe se os seus resultados se afastam do puro acaso – nunca porquê, mesmo quando a razão parece óbvia a partir dos dados. Encare os números como algo a explorar, e não como uma medida fixa de quem é. Consulte também Intuição.
O seu estado
A barra de estados
A barra na vista principal permite-lhe anotar como está neste momento: “Vigor” ou “Cansaço”, “Calma” ou “Stress”, “Confiança” ou “Dúvida”, “Foco” ou “Dispersão”, o seu humor e circunstâncias como “Ao acordar”, “Depois do café” ou “Depois do exercício”. O que anotar fica registado com cada ronda que jogar a partir daí, até o alterar ou até ser esquecido.
Assim, as estatísticas comparam as suas rondas por estado e por período do dia, e cada sequência mostra o estado que tinha anotado. Consulte Os resultados podem variar.
Quando é esquecido
A definição “Repor o estado anotado”, em Definições → O seu estado, decide:
- “Ao abrir a aplicação” – a opção predefinida. Da próxima vez que a aplicação for aberta, começa sem nada anotado.
- “Depois de uma pausa” – o estado é esquecido se não jogar durante o tempo escolhido em “Pausa”, de 15 minutos a 1 dia.
- “Nunca” – mantém-se até o alterar.
Os seus próprios estados
Em Definições → O seu estado → Gerir estados, pode alterar o nome dos estados, reordená-los, adicionar e ocultar estados, acrescentar os seus próprios eixos e desativar um eixo com a respetiva opção “Usar”: um eixo desativado sai da barra de estados, as novas rondas não o registam e as estatísticas deixam-no de fora.
Para retirar a barra por completo, desative a opção “Anotar o estado durante as rondas”; nesse caso, não é registado nenhum estado.
A barra fica oculta quando a vista limpa está ativa e, no estilo “Um a um”, quando o registo de palpites está desativado.
Apresentação e funcionalidades
Temas
Em Definições → Apresentação e avisos há quatro temas – “Areia”, “Oceano”, “Floresta” e “Anoitecer” –, cada um com uma versão clara e uma escura. Em “Apresentação”, pode escolher “Tons claros”, “Tons escuros” ou “Sistema”; com “Sistema”, a aplicação segue a definição do seu dispositivo e muda juntamente com ela. O tema também dá cor às cartas de jogar e à maioria das imagens dos conjuntos prontos.
Avisos
No grupo “Aviso de acerto”, as opções “Vibração” e “Animação” assinalam um palpite correto com uma vibração e um brilho verde; qualquer uma delas pode ser desativada. Funcionam no estilo “Escolha rápida” em cada toque, no estilo “Série” quando todos os sorteios de uma série são acertos e no estilo “Um a um” quando indica o seu palpite antes da revelação. Um palpite errado não gera vibração nem brilho verde. Para a vibração, também é preciso que a opção “Háptica do sistema” esteja ativada na aplicação Definições, em Sons e háptica.
A opção “Animação de pulsação ao tocar” faz pulsar brevemente a célula em que toca nos estilos “Escolha rápida” e “Série”, e o valor que revela no estilo “Um a um” quando marca as rondas manualmente ou não as regista.
Uma vista principal desimpedida
Quase tudo na vista principal pode ser ocultado. Cada opção está na vista das Definições a que pertence:
- Definições → Estilo de jogo e modo: duas opções “Mostrar o seletor”, uma para o estilo de jogo e outra para o modo.
- Definições → Conjuntos para adivinhar: “Mostrar o seletor”, “Mostrar o botão de adicionar conjunto”, “Mostrar o botão de definições do conjunto”.
- Definições → Escolha rápida: “Mostrar o botão de opções da grelha”.
- Definições → Um a um: “Mostrar a dica”.
- Definições → Série: “Mostrar o tamanho da série na vista principal”, “Mostrar a duração da série na vista principal”, “Mostrar o botão de opções da grelha” (a mesma opção que em Definições → Escolha rápida).
- Definições → O seu estado: “Anotar o estado durante as rondas”.
- Definições → Estatísticas: “Mostrar o botão das estatísticas”.
- Definições → Jogo com parceiro: “Mostrar o botão do jogo com parceiro”.
- As definições de cada estilo de jogo (“Escolha rápida”, “Um a um”, “Série”): “Mostrar rondas jogadas”, Mostrar a opção “Resultados”, “Mostrar o resultado”.
Para retirar um conjunto para adivinhar do seletor, desative a opção “Usar” nas definições desse conjunto; o conjunto sai então também do jogo com parceiro e das estatísticas. Ativar a vista limpa oculta a maioria dos elementos da vista principal de uma só vez.
Funcionalidades
Em Definições → Funcionalidades há uma opção para Estilo de jogo “Série” e outra para “Contagens de rondas e resultados na vista principal”. Uma funcionalidade desativada desaparece da vista principal e das Definições.
Idioma
Em Definições → Idioma, pode definir o idioma da aplicação independentemente do idioma do dispositivo, e esta definição também determina a forma como se escrevem os números e as datas. No grupo “Idiomas sugeridos”, a lista mostra primeiro o idioma do sistema e, depois, cada um dos idiomas do dispositivo que a aplicação disponibiliza, pela ordem definida no dispositivo; todos os outros idiomas seguem-se no grupo “Outros idiomas”. Se o novo idioma se ler no sentido contrário, feche a aplicação e volte a abri-la depois da mudança (o sentido da escrita só muda corretamente depois de reiniciar a aplicação).
Por baixo da linha “Idioma” nas Definições, está a opção “Mostrar dicas nas Definições”; mostra ou oculta as explicações por baixo das definições.
Hora grátis e assinatura
A hora grátis
A aplicação pode ser descarregada grátis e inclui uma hora de tempo na aplicação para experimentar tudo o que ela tem. A hora só é contada enquanto a aplicação está aberta no ecrã e soma-se ao longo de todas as suas sessões – enquanto a aplicação está fechada ou em segundo plano, não é contado tempo nenhum.
Quando a hora se esgota, a vista da assinatura abre-se sozinha. Se esse tempo não tiver sido suficiente para decidir se quer assinar, pode ter mais: “Repor a hora grátis” dá-lhe mais uma hora, até 3 vezes – 4 horas de tempo grátis no total.
A assinatura
Para continuar a usar a aplicação depois disso, há uma assinatura com dois planos, “Mensal” e “Anual”. A assinatura é compatível com a Partilha com a família.
Assinar
Abra Definições → Assinatura → Assinar.
Gerir ou cancelar
As assinaturas são cobradas pela Apple. Definições → Assinatura → Gerir assinatura abre a sua assinatura. A assinatura da aplicação também pode ser gerida da forma habitual, nas assinaturas da sua Conta Apple, nas Definições do dispositivo. Cancelar uma assinatura põe fim às renovações automáticas futuras, mas continua a ter acesso até ao fim do período atual.
Quem tem o plano mensal pode passar para o plano anual com Definições → Assinatura → Mudar para o plano anual.
Reembolsos
Os reembolsos são tratados pela Apple: peça um em reportaproblem.apple.com. Não temos acesso aos seus dados de pagamento e não podemos ser nós a emitir um reembolso – mas escreva-nos também se algo correu mal, porque é a única forma de sabermos.
Restaurar uma compra
Num dispositivo novo, abra Definições → Assinatura → Assinar e toque em “Restaurar compras”. Isto também restaura uma assinatura que um membro da família partilhe consigo. Use a Conta Apple com que fez a assinatura ou uma do mesmo grupo familiar.
Os seus dados
Em resumo
Não há contas nem servidores. A aplicação não envia os seus dados nem para nós nem para qualquer outra empresa. O jogo com parceiro troca dados apenas com o outro dispositivo – numa rede Wi‑Fi partilhada pelos dois dispositivos, ou de dispositivo para dispositivo quando os dois estão perto um do outro.
Onde ficam guardados
As suas definições, os seus conjuntos para adivinhar – incluindo as imagens que adiciona – e a sua lista de estados são guardados no seu dispositivo, no armazenamento próprio da aplicação. Até ativar a opção “Guardar as estatísticas no dispositivo”, as estatísticas ficam apenas na memória enquanto a aplicação está em execução.
Tal como os dados de qualquer outra aplicação, tudo isto fica incluído nas cópias de segurança do seu dispositivo.
A aplicação não contém ferramentas de análise nem relatórios de falhas.
Quando nos escreve
Os e-mails que nos envia são correspondência normal: só os guardamos durante o tempo necessário para lhe responder.
Todos os pormenores estão na Política de Privacidade.
Os seus próprios conjuntos criados com IA
Pode pedir a um assistente de IA, por exemplo um chatbot, que desenhe imagens para um conjunto para adivinhar ou que crie um conjunto inteiro. As imagens são desenhos SVG. Uma imagem SVG pode conter os respetivos textos em vários idiomas, e a aplicação mostra então os textos no idioma definido na aplicação. Uma imagem também pode assumir as cores do tema da aplicação, tanto na versão clara do tema como na versão escura. Um conjunto pode ter o seu próprio substituto “?”: a imagem mostrada enquanto o valor está oculto. O assistente precisa da descrição dos formatos; cada pedido abaixo inclui o endereço dessa descrição.
Criar um conjunto
- Copie um dos pedidos abaixo para o assistente e altere-o como quiser: o assunto, o número de imagens (de 2 a 200), os idiomas.
- Se o assistente não conseguir abrir páginas web, dê-lhe também a descrição dos formatos: em Descrição dos formatos para IA, toque em “Copiar” e cole a descrição na mesma conversa, ou toque em “Guardar” e anexe o ficheiro guardado.
- O assistente responde com o conjunto num único bloco de código, muitas vezes com algumas palavras de explicação antes e depois. Copie apenas o bloco de código: em muitas aplicações de chat, tem um botão próprio para copiar.
- Na aplicação, toque em na vista principal e, na vista “Adicionar conjunto”, toque em “Colar do clipboard”. Se o assistente estiver a funcionar noutro dispositivo, por exemplo num Mac, guarde aí o bloco de código num ficheiro cujo nome termine em .json e, em vez disso, toque em “Importar de um ficheiro”. O novo conjunto é adicionado e fica selecionado; toque em “Começar a adivinhar” para ir para a vista principal. Os mesmos botões encontram-se também logo abaixo destes passos.
Se ocorrer um erro, peça ao assistente que o corrija.
Um conjunto sem legendas:
Crie um conjunto para adivinhar chamado “Animais” para a aplicação Intuition Check: 10 imagens SVG de animais diferentes, sem legendas. Primeiro leia a descrição dos formatos e siga-a: https://intuition-check.com/llm-formats.txtUm conjunto com uma legenda em cada imagem. A legenda não muda com o idioma da aplicação:
Crie um conjunto para adivinhar chamado “Fruta” para a aplicação Intuition Check: 8 imagens SVG de frutas diferentes, cada uma com uma legenda por baixo do desenho: o nome da fruta. Primeiro leia a descrição dos formatos e siga-a: https://intuition-check.com/llm-formats.txtUm conjunto com nomes em vários idiomas. Cada legenda mostra o nome da imagem no idioma da aplicação:
Crie um conjunto para adivinhar multilingue chamado “Planetas” para a aplicação Intuition Check: 8 imagens SVG dos planetas, cada uma com uma legenda que mostra o nome da imagem no idioma da aplicação. Indique os nomes em português, alemão e hindi. Primeiro leia a descrição dos formatos e siga-a: https://intuition-check.com/llm-formats.txtUm conjunto cujas imagens assumem as cores do tema da aplicação:
Crie um conjunto para adivinhar chamado “Estado do tempo” para a aplicação Intuition Check: 8 imagens SVG – sol, nuvem, chuva, neve, trovoada, vento, nevoeiro e arco-íris – sem legendas. As cores devem seguir o tema da aplicação, na versão clara e na versão escura. Primeiro leia a descrição dos formatos e siga-a: https://intuition-check.com/llm-formats.txtCriar uma única imagem
O assistente também pode criar uma única imagem. Copie o bloco de código da imagem, abra um dos seus próprios conjuntos de imagens, toque em e toque em “Colar do clipboard”. A imagem é adicionada sem nome: toque nela e escreva um nome no campo “Nome”. Também pode guardar o bloco de código num ficheiro cujo nome termine em .svg e, depois, no conjunto, tocar em e escolher “Ficheiros”; o nome do ficheiro sem .svg passa a ser o nome da imagem.
Desenhe uma imagem SVG de um gato para a aplicação Intuition Check. Primeiro leia a descrição dos formatos e siga-a: https://intuition-check.com/llm-formats.txtO que mais um conjunto pode ter
Peça ao assistente que explique o que os formatos permitem, com um exemplo de pedido para cada possibilidade:
Leia a descrição dos formatos da aplicação Intuition Check: https://intuition-check.com/llm-formats.txt Explique de forma breve e com palavras simples o que é possível fazer nos conjuntos e nas imagens: como as imagens podem seguir o tema da aplicação – os diferentes temas, a versão clara e a escura; como os nomes de um conjunto e das respetivas imagens podem ter traduções para outros idiomas; que tipos de legendas uma imagem pode ter; o que o substituto “?” do conjunto (o respetivo verso) pode mostrar. Para cada possibilidade, dê um exemplo de pedido que eu lhe possa enviar. Não desenhe nada por agora.Descrição dos formatos para IA
A descrição dos formatos está escrita em inglês para um assistente de IA, não para ser lida por uma pessoa. A mesma descrição está no site, no endereço indicado nos pedidos acima.
This is a specification for language models; it is not formatted for human reading.
Format version: 1
Stable URL: https://intuition-check.com/llm-formats.txt
# Intuition Check: how to make SVG pictures and guess sets
Intuition Check is an iOS app. The app picks one picture of a guess set, hidden, and the user guesses which one.
A guess set is a named, ordered list of pictures. This text tells you how to produce (A) a whole guess set as
one JSON object, or (B) one picture as one SVG document, so that the app accepts it and draws it well.
The user's wishes always win. Every rule, default and style advice in this text is what you do when the user
has not said otherwise: anything the user asks for — any texts, any number of them, any place, size, shape,
colour or layout, a caption over the drawing, a word along an arc — overrides it. Only facts about the app
cannot be overridden, because the app enforces them (what it accepts and refuses, what it removes, how it
draws: sections 2, 3, 5 and the theme rules of 6 — but a sentence there that tells you what to do is still a
default, not a fact about the app); if a wish runs into one of them, do the closest thing the app allows and
say so.
## When the user asks what the formats allow (to explain, not to make)
Answer in the user's language, in plain words, without code. Keep apart what the app does and what you do by
default. The sizes, positions and orders in this text, and its sentences that tell you what to do ("put",
"give", "write", "keep"), are your defaults for a good result: the app does not check them and the user may
ask otherwise. Do not retell them as rules of the app ("must", "required", "not allowed"); say "by default I …".
What the app itself does:
- Themes: four themes, each light and dark. The app never recolours a picture on its own; a picture follows
the theme only where its own file says so (section 6), which you write when asked.
- Names: a set needs a name; a picture's name is optional. The set and every picture may have translations,
each its own languages; the app shows the one for the app language, else the default name.
- Captions: text in a picture is part of the drawing; the app never writes or translates it. A caption is one
fixed text, or holds versions in any number of languages, two included, and the app language picks one.
- The "?" placeholder: a set without a cover shows the app's own "?". The app draws no cover itself. A cover
is a picture like any other: it may show anything, with or without text, follow the theme and the app
language, and stand anywhere in the set.
- Limits: at least 2 pictures to guess (a cover is not one of them), at most 200 in all, 10 MB per SVG; one
refused picture refuses the whole set.
Do not translate the themes' code words (section 6).
Terms used below:
- name: the picture's name as stored in the app (`name`, `nameTranslations`). It is data, not part of the drawing.
- caption: a text drawn inside the picture (an SVG `<text>`). Optional. See section 4.
- app language: the language the app's interface is set to, in the app itself; it may differ from the device's
language. One of the codes in section 3.
- user's language: the language the user writes to you in, unless the user names another.
## 1. Output contract
A. The user asks for a SET (several pictures, "guess set", "set"):
- Answer with ONE JSON object as defined in section 2, in ONE code block. Nothing else is needed.
- If you add words outside the code block, they must not contain `{` or `}`: the app reads the pasted text
from the first `{` to the last `}`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block (chat apps usually show a copy button on it) and paste it into Intuition Check as a new set — or,
on another device, to save it as a file whose name ends in .json and open that file in the app.
B. The user asks for a single PICTURE:
- Answer with ONE SVG document (section 5) in ONE code block.
- If you add words outside the code block, they must not contain `<svg` or `</svg>`: the app reads the
pasted text from the first `<svg` to the last `</svg>`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block and paste it into one of their picture sets in Intuition Check; the picture is added without a
name. Or to save it as a file whose name ends in .svg and add that file to a set: the file name without
".svg" becomes the picture's name, so suggest a file name that is the name, e.g. `Cat.svg`.
In both: do not name the app's buttons or screens from memory, and do not translate their names yourself. The
app's help exists in every language of the app, with the exact names the app shows in that language; the steps
are in its section "#ai_sets", and the page for each language is listed in https://intuition-check.com/llms.txt. If
you can open web pages and the user wants the steps, take the names from the page in the user's language.
Otherwise the one sentence above is enough: the app's help and its own screens show the user where to paste.
Ask first, or proceed:
- Proceed without questions. Decide what the request leaves open, and say what you decided in a sentence or
two beside the code block:
- which things of a kind ("five animals": choose the animals);
- how many pictures, if no number is given: 4;
- the regional form of the user's language: take the likeliest and name it (e.g. "Canadian French");
- translations: as well as you can; name the languages you are least sure of;
- themes not mentioned: fixed colours, and one sentence that a version following the app's themes can be
made;
- a cover with nothing said about what it shows: the question mark (8c).
- Ask only when you cannot start: you cannot tell which language the names should be in, or the request names
no subject at all. Then at most 2 questions, in ONE message, in the user's language, each with the choice
you will make if the user does not mind; no code block in that message. Never ask what the message already
says. Plain words: no "code block", "JSON", "opaque", "plate", "import", nothing about how the format works.
- If you cannot ask (there is no dialogue), or the user tells you not to: proceed.
- What you say beside the code block is in the user's words: "its own background", not "opaque plate";
language names, not codes; at most four short points. The file endings .json and .svg are allowed: the
user needs them.
- Like all words outside the code block: no `{` or `}` next to a set, no `<svg` next to a picture. Do not
quote code outside the code block.
Defaults when the request does not say otherwise:
- No caption text in the drawing (section 4, option 1).
- No theme colours (section 6). Fixed colours of your own.
- Names: always give every picture a `name`, in the user's language. Give no `nameTranslations` unless the
user asks for other languages or for captions in several languages (section 4, option 4).
- Number of pictures: what the user asked for; never fewer than 2 or more than 200.
- No cover (section 2). A cover the user asks for is extra: it is not one of the pictures asked for.
## 2. The set format (JSON)
```json
{
"intuitionCheckSet": 1,
"name": "Animals",
"nameTranslations": { "ru": "Животные", "de": "Tiere" },
"images": [
{ "name": "Cat", "nameTranslations": { "ru": "Кот", "de": "Katze" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><circle cx=\"50\" cy=\"56\" r=\"30\" fill=\"#f57c00\"/><path d=\"M24 44 L28 14 L48 30 Z M76 44 L72 14 L52 30 Z\" fill=\"#f57c00\"/></svg>" },
{ "name": "Fish", "nameTranslations": { "ru": "Рыба", "de": "Fisch" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><ellipse cx=\"44\" cy=\"50\" rx=\"30\" ry=\"18\" fill=\"#1976d2\"/><path d=\"M70 50 L92 32 L92 68 Z\" fill=\"#1976d2\"/></svg>" }
]
}
```
(The drawings above are kept tiny to show the shape of the file. More examples are in section 8.)
Keys:
- `intuitionCheckSet` (required): the integer 1.
- `name` (required): the set's default name. Not empty.
- `nameTranslations` (optional, on the set and on each image): object, language code → name. Codes: section 3.
- `images` (required): array of at most 200 objects, at least 2 of them pictures to guess (a cover is one
more, not one of the 2).
Array order = display order. Each object:
- `name` (optional in the format; always give it): the picture's default name.
- `nameTranslations` (optional): as above.
- `svg` (required): one complete SVG document as a JSON string (section 5).
- `cover` (optional): the JSON literal `true` on the picture that is the set's cover (below). Leave it out
on every other picture.
- Unknown keys are ignored. Do not add any.
The cover: while the app hides the value to guess, it shows a "?" in its place. A set — any set, with or
without captions — may bring its own picture for that place: the cover. Give one ONLY when the user asks for
it (a cover, a back, a placeholder, a question-mark picture). It shows what the user wants: for a set of
playing cards, for example, the pattern of a card's back. If the user does not say what it shows, draw the set's
own frame, with a question mark where the other pictures have their subject (8c; the last picture of 8f);
when the pictures' plates differ in colour, a plate of the same family (8f: a neutral grey). Exactly one
picture gets `"cover": true` (if several do, the first counts and the others are ordinary pictures). The
cover is never an answer, so the set still needs at least 2 other pictures. Put it last in `images` (your default; the app takes it at any place). Give it
a `name` in words ("Question mark", not "?") and, in a multilingual set, `nameTranslations` in the same
languages as the pictures: the app shows the cover's name in the set's list of pictures, in the app language.
By default the cover has no caption (no word under it); the app draws any text it has. Its question mark is the cover's subject; it only borrows the
`class="caption"` pattern of section 4, option 4, so that it changes with the app language. Write the mark
as text (preferred) in two forms: `?`, and `؟` for Arabic and Urdu (the form those languages write). The app
does not change the mark itself: the cover holds both, and its own style sheet shows the one for the app
language. That works in every set, also in one without captions; the two marks are then its only `<text>`. Drawn as a
shape instead, the mark is the same in every app language: Arabic and Urdu see the Latin form. A cover with
a subject of its own (a card back, a cloud) needs no `<text>` and no style sheet.
A single picture (answer B) has no cover key: the user marks a picture as the cover inside the app. A single
picture meant as a cover and asked with a caption: do both, and say that the word will show on the cover.
Rules:
- Strict JSON, UTF-8: no comments, no trailing commas. Non-ASCII characters may be written as they are.
- Inside the `svg` string escape `"` as `\"` and `\` as `\\`; write the SVG on one line, or write each line
break as `\n`. No raw line break or tab inside a JSON string. Where you join two lines, put one space,
never nothing. No other escape is needed: an apostrophe stays `'` (`\'` is not JSON), and letters of any
script stay as they are.
- Types: `intuitionCheckSet` is the number 1, every name and translation is a string, `cover` is `true`. A
wrong type (`"cover": "true"`, a number as a name, `null` as a translation) makes the app refuse the whole
text.
- If the app refuses any one picture, it imports nothing and names the refused pictures. Every picture must
be valid.
- A name is one line of plain text. The app trims it, turns line breaks and tabs into spaces, and cuts it at
256 characters. Keep names short (one to three words): they are shown small.
How names are shown:
- A set is multilingual when the set or any image has at least one translation.
- In a multilingual set the app shows, for the app language: the translation with exactly that code; else
the translation with the code's first part (`fr-CA` → `fr`, `en-GB` → `en`, `es-419` → `es`); else the
default `name`.
- In a set without translations the app shows the default `name` in every app language.
When the user asks for a multilingual set:
- Default `name` (set and images): in the user's language.
- `nameTranslations`: one entry per requested language, on the set AND on every image. Give the same
languages on every image (the app does not require it: an image without an entry shows its default name).
- The language of the default `name` gets no entry of its own: a language without an entry shows the default
name.
- A regional code (`en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA`) needs its own entry only when its word
differs from the `en` / `es` / `fr` entry. `pt-BR` and `pt-PT` have no common code: each requested one that
is not the language of the default `name` needs its own entry (asked for "Portuguese" with an English default
name: give both). The same for `zh-Hans` and `zh-Hant`.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`, `fr`,
`es`), in names as in captions: every form of that language then shows it.
- Languages not named ("a multilingual set"), or "all languages": every language of section 3 — 53 codes,
47 entries (see there). Translate as well as you can (section 1). Leave out only a language you cannot
write at all (it then shows the default name), and tell the user which.
- `nameTranslations` change only names, never a caption. A multilingual set has no captions unless the user asks for them; a
caption drawn inside the pictures needs its own words for each language in the SVG itself (section 4,
option 4).
## 3. Language codes
Write the codes exactly as here (case matters):
ar bg bn ca cs da de el en en-AU en-CA en-GB es es-419 fi fr fr-CA gu he hi hr hu id it ja kk kn ko lt ml mr ms
nb nl or pa pl pt-BR pt-PT ro ru sk sl sv ta te th tr uk ur vi zh-Hans zh-Hant
A code that is not in this list is not an error: the app drops it. An entry
with an empty value is dropped.
"All languages" is 53 codes but 47 entries besides the default, in names and in captions: the user's language
is the default and needs none, and `en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA` show the `en` / `es` / `fr`
word unless theirs differs. (With a Bengali default, `en` is one of the 47 and `bn` is not.)
## 4. Captions (text inside the drawing): four options
Names (section 2) are separate from captions: the app never writes a name into a picture and never changes any
text of a picture. Give names always. Text in, on or under the picture — whatever the user calls it (name,
word, label) — is a caption request; a wish about the words alone (correct, careful) is not. If you leave out
something that was asked for, say so. Lettering that is part of the subject (STOP on a road sign) is
drawing, not a caption: allowed under every option, written once, with `lang`.
Urdu is drawn in Nastaliq, its own style, which reaches lower under the line than other scripts (about
0.3 × font-size): leave room under an Urdu caption. A `؟` in Urdu is smaller in Nastaliq: give it its own text and size (8c).
A caption's `lang` may be a regional code (`en-GB`, `fr-CA`), also where its name stands under the parent code.
Choose the caption option from the request:
1. DEFAULT — no caption. The drawing has no `<text>` that spells the name. Also for a multilingual set
whose user did not ask for captions.
2. ONE-LANGUAGE caption — when the user asks for a caption / label / word in or under the picture and names
no languages for it. A plain `<text>` with the word in the user's language; every app language shows
that same word. Put `lang="CODE"` of the caption's language on the `<text>`: a picture
with text is drawn anew for each app language, and without `lang` the letter forms follow the app language. No
`letter-spacing` in Arabic, Hebrew, Thai or an Indic script. Example:
`<text lang="ru" x="50" y="91" font-size="12" font-family="sans-serif" text-anchor="middle" fill="#222222">Кот</text>`
3. TWO LANGUAGES AT ONCE — when the user names exactly two languages for the word under the picture and does
not say it should change with the app's language. The same for any other text of the picture: each gets its
two lines. Two `<text>` lines, each with its `lang`, both always
shown, no style sheet for them: the user's language on top, font-size 10, baselines at y = 84 and 95,
subject in the upper 68 units (100-unit viewBox). A line in a script of 8b's "Lettering" block takes that
`font-family` as an attribute; a long word follows "Size" below. Names: the user's language as `name`,
the other in `nameTranslations`. Say that both words always show, and that captions that change with the
app's language can be made instead.
4. CAPTIONS IN SEVERAL LANGUAGES — when the user names three or more languages for the captions, or asks for
captions in all of the app's languages, or for captions that follow the app's language (= all of them).
The picture holds one caption per language and a small style sheet; through that style sheet the app
language picks the caption (8b, 8f). Languages: exactly those the user named; "all" = every language of
section 3 (53 codes, 47 entries: see there), translated as well as you can (section 1). In a set, give
every image `nameTranslations` with the same languages and the same words, so that the name and the
caption agree.
How option 4 works:
- A picture that contains `<text` or `:lang(` is drawn anew for each app language it is shown in, each time
inside an HTML page whose language is that app language: `<html lang="CODE">`, CODE from section 3 (`ru`,
`pt-BR`, `zh-Hant`, …). The app changes nothing in the file; the file's own CSS picks the caption with the
selector `:lang()`.
- `:lang(x)` matches a page in `x` and in every `x-…`: `:lang(fr)` also matches `fr-CA`, `:lang(es)` also
`es-419`, `:lang(en)` also `en-GB`. `pt-BR` and `pt-PT`, `zh-Hans` and `zh-Hant` are written separately.
- The pattern:
- All language versions of one text in ONE group with `class="caption"`; each `<text>` in it is one
language version, all at the same place.
- Any number of texts, anywhere and in any form (labels on parts, a title, words along an arc with
`<textPath href="#id">`): give each text its own group with `class="caption"` holding its language
versions; the one style sheet serves them all.
- The default caption has the class `default`. It carries the word of the default `name`, in the user's
language. It is shown when the page has no language and in every language that has no caption of its
own. The user's language is one of those: its code stands in no rule and on no caption. (In 8b and 8f
the default word is English, so `en` appears nowhere. The Zodiac files call this class `en`.) The
default caption is also shown on pages of other languages: give it `lang="CODE"` of the user's language.
If that language has a line in the "Lettering" block of 8b, add `.default` to that line's selector
(`.default, .hi, .mr { font-family: … }`; `.default` alone when no caption has that class), and to the
`letter-spacing: 0` line if you use letter-spacing.
- Every other caption's `class` lists the codes of the languages that show it. Languages with the same
word may share one caption: `class="bg ru"`; that changes only the `class`, never the style sheet. These
captions need no `lang`: each shows only on a page of its own language.
- The style sheet, in this order:
`.caption text { display: none }` — hide every caption;
`.caption .default { display: inline }` — show the default one;
`:lang(ar, bg, …) .default { display: none }` — hide the default one in every language that has its own
caption (list them all);
`:lang(ar) .ar, :lang(bg) .bg, … { display: inline }` — show each language's own caption.
- A regional code whose word differs from its parent's (`es-419` next to `es`): its own caption, its code in
both rules like any other, and one more rule: `:lang(es-419) .caption .es { display: none }` (the extra
`.caption` makes it win wherever it stands in the sheet). If its word is the parent's, give it nothing.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`,
`fr`, `es`), so every form of that language shows it. "Portuguese" alone: one caption
`class="pt-BR pt-PT"` when the word is the same.
- Do not repeat the default word under the user's own code (no caption, no rule, no `nameTranslations`
entry for it).
- Check: the codes in the hiding rule = the codes in the showing rule = the codes on the captions, and
each code is on exactly one `<text>`; the user's own code is in none of the three. Otherwise a language
shows no caption, or two at once.
- To leave a language out: no `<text>` for it and its code in neither rule. It then shows the default
caption.
- In a set: the same style sheet, the same attributes on the caption group and the same languages in every
picture, character for character. Only the words differ, and the size of a long word. (A cover has its
own text and rules: 8c, 8f.)
- Size: the app does not measure or shrink text. Choose one `font-size` on the group at which the captions
fit the free width. A word too long for it: first its own smaller `font-size` attribute, down to 9 (on a
100-unit viewBox); if it still does not fit, a shorter everyday word (and the same word as its name).
Never under 9. To estimate a width (measured in WebKit on a Mac):
- ordinary case in bold `sans-serif` (8f): 0.45 to 0.6 × font-size per letter. Треугольник is 77 of 100
units wide at font-size 12, and 68 at 10.5;
- a Chinese character: about 1 × font-size;
- Indic scripts, Thai, Arabic, Hebrew in bold `sans-serif`: 0.3 to 0.55 × font-size per code point (13
words measured).
- Case: ordinary case, as in 8f; capitals with wide spacing only for the style of 8b. Capitals follow each
language's rules: Turkish i → İ; Greek capitals lose the accent (ΑΣΤΈΡΙ → ΑΣΤΕΡΙ); German ß → SS.
- Fonts: copy the "Lettering" block of 8b (in a set, only the lines of the scripts you use). It gives every
script outside Latin, Cyrillic and Greek its own font list (fonts present on Apple devices, at a weight
they really have), and sets `letter-spacing` to 0 for Arabic, Hebrew, Thai and the Indic scripts — in most
of them the letters join or stack, and spacing breaks that (a line needed only when the group has
letter-spacing). Japanese, Chinese and Korean each get their
own font so that a Han character takes its regional form; that is why `zh-Hans` and `zh-Hant` keep
separate captions even with the same word.
- Direction: the page is left-to-right in every app language. Keep `text-anchor="middle"` for every script.
An Arabic, Hebrew or Urdu caption mixed with digits or Latin letters has not been tested: avoid it.
- A caption drawn twice (e.g. a shadow under it): put the group once inside `<defs>` with an `id`, and draw it
with two `<use href="#id">` that carry the colours and the offset.
- Whole set: captions and names in all languages fit in one answer. Write every language that was asked for, in
every picture. Do not ask about it, and do not tell the user it may not fit. In a set, leave out comments
and indentation.
- Never: fewer languages than asked without saying which are missing; captions left out when they were asked
for; one set spread over several messages or delivered as single pictures; a set cut short. A set is
always ONE JSON object in ONE message.
Start from 8f (a small set with captions and a cover, 100-unit viewBox). Take from 8b (a picture with a
caption in every language) its "Lettering" block, and its gold medallion style only when the user asks for
it; 8c is that set's cover. All three are complete and tested in the app. 8b and 8c are built like the app's
own Zodiac set; one of its files, if you can open web pages (you do not need it):
https://intuition-check.com/sets/zodiac/zodiac-08-scorpio.svg
## 5. The SVG document: what the app does with it
Facts (from the app's code):
- Size limit: 10,000,000 bytes per SVG (UTF-8). A larger SVG is refused.
- The app recognises an SVG by the characters `<svg` within the first 4096 bytes. Begin the document with
`<svg`: no XML declaration, DOCTYPE or comment before it.
- The app draws the SVG into a still bitmap, at most 1600 pixels on the longer side, with WebKit, inside an
HTML page. A picture with text is drawn anew for each app language it is shown in, and one with theme
rules for each theme. The background is transparent: where the drawing paints nothing, the app's own
background shows, light or dark depending on the user's theme.
- Scaling: the root's `viewBox` is fitted into the bitmap, aspect ratio kept, centred. `width` and `height`
on the root are ignored. A picture without a `viewBox` is accepted, but drawn unscaled (cut off or tiny):
always write one.
- The aspect ratio is read from the first `viewBox="minx miny width height"` in the first 4096 bytes: double
quotes, four numbers separated by spaces or commas, positive finite width and height. If it cannot
be read, the bitmap is square. Ratios outside 1:20 … 20:1 are clamped.
- `preserveAspectRatio="none"` on the root is replaced with `xMidYMid meet`: a picture is never stretched.
- Scripts never run. Nothing is loaded from the network: only content inside the file is drawn.
- Rendering has a time limit (10 seconds to load, 10 seconds to draw). A picture that exceeds it is refused.
Removed before drawing (so never write them; the rest of the picture is still drawn):
- these elements with everything inside: `script`, `foreignObject`, `meta`, `link`, `base`, `iframe`, `frame`,
`frameset`, `object`, `embed`, `applet`, `portal`, `form`, `input`, `button`, `textarea`, `select`, `option`,
`audio`, `video`, `source`, `track`, `template`, `noscript`;
- every attribute whose name starts with `on` (`onload`, `onclick`, …);
- every `href` / `xlink:href` whose value does not start with `#` (a part of the same file) or `data:image/`;
- `@import` in a style sheet; `<?xml-stylesheet …?>`; a DOCTYPE with an internal subset (`[ … ]`).
The removal works on the text of the file: the character sequences `on…=`, `href=` and `@import` are also
removed from text content and CSS, so do not write them there.
Allowed and drawn: shapes, `path`, `g`, `text`, `tspan`, gradients (`linearGradient`, `radialGradient`),
`pattern`, `mask`, `clipPath`, `filter`, `defs`, `symbol`, `use` with `href="#id"`, `<style>` with inline CSS,
`title`, `desc`, `image` with `href="data:image/…"` (a picture embedded in the file).
Not removed, but useless: `a` (a link does nothing in a picture in the app).
Rules for the SVG you write:
1. Root: `<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">` … `</svg>`. Double-quoted
attributes. Lower-case `<svg`. One root; no nested `<svg>` elements.
2. Square `viewBox` (`0 0 100 100`) unless the user asks for another shape. The same `viewBox` for every
picture of a set.
3. Self-contained: no external images, fonts, style sheets or links. For text use
`font-family="sans-serif"` (or `serif`, `monospace`), or the font lists of 8b, which end with one of them:
the text is drawn with the device's own fonts.
4. Well-formed XML: every element closed, attribute values quoted, `&` `<` `>` in text and attribute values
written as `&` `<` `>`. Only SVG elements; no HTML elements.
5. Readable small: the app shows pictures in a grid, each cell may be small. One clear subject that fills
most of the viewBox; a few large shapes; strong contrast; no fine detail. On a 100-unit viewBox: the
subject's lines at least 2 wide, a caption's font-size at least 10, a long word 9. Ornament may be
thinner (the rings of 8b); in a small cell it may not be seen. The examples in this text are bare on
purpose; do not copy their simplicity. Build the subject from about 4 to 10 shapes: its outline, its
parts, and one or two details that make it this thing and no other. Someone who sees only the picture
must be able to name it.
Pale or pastel colours: keep the silhouette. The subject's main shape, or an outline around it, must differ
from the plate by at least 3:1 — a darker outline, or a deeper plate. That is for the silhouette only:
details inside the subject are free.
6. Distinct: the game needs the pictures told apart at a glance. Every picture of a set must differ clearly
from every other in silhouette or in main colour — not only in a detail. No two pictures with the same
SVG text.
7. One style across a set: the same viewBox, margins, line weights, palette family, and the same kind of
background (all with a plate, or all without). With captions: the same lettering and caption place in
every picture.
8. Background: the bitmap is transparent and the app's background can be light or dark. Either draw an
opaque plate of your own behind the subject (e.g. `<rect width="100" height="100" rx="12" fill="…"/>`), or
use only colours that stay visible on both white and near-black, or use theme colours (section 6).
9. Unique `id` values inside one SVG. Ids of different pictures do not clash (each picture is drawn alone).
Do not start an id with `ic-` unless it is a theme rule, and do not name a class of your own `ic-…` or a
variable `--ic-…` (section 6).
10. Keep it light: no heavy filters (large blurs), no deep `use` nesting, no animation (the app does not remove it, but
draws the picture as a still image).
11. A caption must not cross the drawing, unless the user allowed it (labels on the drawing's parts, a word on
a sign or over the subject are such wishes). Any text stays inside its own shape when it has one (a sign,
a label, a slice), and inside the picture. Keep the subject and the caption
apart — e.g. on a 100-unit viewBox: the subject above y = 78 and one caption line with its baseline at
y = 91; with two lines (section 4, option 3), the subject above y = 68.
## 6. Theme colours
Use this section ONLY when the user asks for pictures that follow the app's theme, or for light and dark
versions. Otherwise use fixed colours, no id that starts with `ic-`, no class `ic-…` and no variable
`--ic-…`. When the user said nothing about
themes: fixed colours, and offer a version that follows the themes (section 1). "Looks good in light and dark
mode" is not a theme request: an opaque plate with fixed colours does it (section 5, rule 8). A theme request
wins over a colour description in the same message ("gold on dark, matching the app's themes": theme rules).
The app has four themes — `sand`, `ocean`, `forest`, `dusk` — each in a `light` and a `dark` version. These words
(and `light`, `dark`) are code words for the rules below, not what the user sees: the app shows the four themes
under its own names in the user's language. When you talk to the user, do not translate the code words
yourself; say "the app's four themes" (and "light" / "dark" in the user's language), or, if you can open the
app's help page in the user's language (see section 1), take the themes' names from it.
Every version has its own values for five colours:
- `background` — the colour behind every view;
- `surface` — plates and panels on a view;
- `text` — the app's text colour;
- `accent` — the colour of buttons that are not filled;
- `soft` — in a light version the same as `accent` (a `soft` part on an `accent` part cannot be seen there);
in a dark version a pale tone close to the text colour.
The values (#rrggbb), in the order background, surface, text, accent, soft:
- sand light: f6f2ea eae3d5 403a35 645339 645339
- sand dark: 1b1a18 282622 c7c4bd b89b70 d2cbbe
- ocean light: eef4f7 dde8ee 363d40 3e5a6a 3e5a6a
- ocean dark: 0d1a23 16272f bec4c7 82a3b6 c6d4db
- forest light: f1f4ec e1e8d7 353e34 4a5e46 4a5e46
- forest dark: 111a14 1b261e bec4bd 8ba586 c9d4c6
- dusk light: f6f1f6 eae0ec 3f3944 5e4a6a 5e4a6a
- dusk dark: 17121c 231b2a c2bdc5 a894b4 d3c9d9
All four themes are muted: no colour above is bright. `text`, `accent` and `soft` on `background` or `surface`
have a contrast of at least 5.6:1 in every version.
Fixed colours and theme colours mix freely: give rules only to the parts that should follow the theme (a plate,
outlines, the main shape) and keep your own fixed colours where the picture needs them (the arcs of a rainbow,
a red apple). A part without a rule is drawn as written in every theme.
A part that keeps a fixed colour sits on a plate that changes: check it against the light and the dark
background and surface values of the table. Near-black vanishes on the dark ones (#1b1b1b: 1.01:1), white and
yellow on the light ones (#ffffff: 1.11:1, #f9a825: 1.54:1). Give such parts the theme's text colour — in a
style sheet `fill: var(--ic-text, #333333)` (or `stroke:`), with ids `ic-text` or `ic-stroke-text` — or
use a mid-tone (#e53935: 3.30:1 on the light ones, 3.57:1 on the dark ones).
Captions on a themed plate take the theme's text colour. In a style sheet: one more line,
`.caption { fill: var(--ic-text, #222222) }`, in the sheet that already picks the caption; a single `<text>`
gets a class and the same line; a caption drawn twice through `<use>` gets the class on the `<use>` that
carries its colour (8b). With ids: give the caption group `id="ic-text"` and a written `fill`; the group may
also carry `class="caption"`; a single `<text>` may carry the id itself. A themed cover's mark is coloured
the same way.
There are two ways to write theme colours, and the app reads both. Use a style sheet (6.1), also when the
user will edit the file in Inkscape (6.4). Use ids (6.2) instead when the user says the file will be edited
in Figma, Illustrator, Affinity or Sketch, or asks for ids: those editors write the file anew and drop its
`<style>` element, while ids can come through as layer names (Figma only with its option to include ids).
One way per picture, and in a set the same way in every picture: the app accepts both in one file, but a
rule in a group's id overrides the sheet colours of the classed shapes inside that group.
### 6.1 A style sheet
The app adds to the root `<svg>` the classes `ic-sand` | `ic-ocean` | `ic-forest` | `ic-dusk` and `ic-light` |
`ic-dark`, and defines the CSS variables `--ic-background`, `--ic-surface`, `--ic-text`, `--ic-accent`,
`--ic-soft` — but only if the file contains, in its `<style>` element, one of those six class names after a
dot (e.g. `.ic-dark`), or, in `<style>` or in a `style` attribute, a variable name that starts with `--ic-`.
```
.plate { fill: var(--ic-surface, #dddddd) }
.leaf { fill: var(--ic-accent, #e53935) }
.ic-dark .dot { fill: #ffd54f }
.ic-forest.ic-dark .dot { fill: #69f0ae }
```
The second value inside `var()` is the colour other viewers show. Give the styled elements a `class` and no
`fill` in a `style` attribute. The second value is needed: always write it.
- The five variable names are the only ones. Another name (`--ic-bg`) is never defined: its second value is
drawn in every theme.
- Write `var(--ic-…)` inside the `<style>` element, not in a `fill="…"` or `stroke="…"` attribute: the app
does not look there, and with no other mention it defines no variables.
- The app writes the six classes on the root. Never write one of them on an element yourself.
- A sheet rule beats a colour written in a `fill` / `stroke` attribute; a colour in a `style` attribute beats
the sheet.
- Of two sheet rules of equal weight the later one wins: plain rules first, then `.ic-light` / `.ic-dark`
rules, then theme rules.
- Put these lines into the same `<style>` as the caption rules of section 4, when the picture has them.
### 6.2 Rules in an id
A rule = optional limits + a colour.
- Limits, at most one of each kind, any order: a theme (`sand` | `ocean` | `forest` | `dusk`); a version
(`light` | `dark`); a paint (`fill` | `stroke`). No limits = every theme, both versions, fill and stroke.
- Colour: one of the five names above, or your own colour as exactly six hex digits (`1e88e5`). Colour words
(`red`) are not colours in a rule. All rule words are English.
`id="ic-` + one or more rules, all words joined by hyphens, own colours without `#`:
- `ic-text` — the text colour everywhere;
- `ic-light-accent-dark-soft` — accent in light versions, soft in dark versions;
- `ic-dark-1e3a2a` — own colour in dark versions; as drawn in light versions;
- `ic-ocean-dark-c3ced4` — own colour in the dark version of Ocean only;
- `ic-stroke-accent` — accent on the outline only.
- `ic-fill-accent-stroke-text` — two rules in one id: accent inside, text colour on the outline.
Reading stops at the first character that is not an ASCII letter, digit or hyphen, and at the first word that
is not a rule word. So keep ids unique with a numeric suffix: `ic-text-2`, `ic-text-3`. A word of your own
ends the rules: `ic-moon-text` holds no rule. A six-letter word of hex digits (`facade`) is read as a colour.
What a rule does:
- The id may be on a shape, a `text`, or a group `g`. A rule on a group covers everything inside it, except
what is inside `defs`, a gradient, `mask`, `pattern`, `clipPath`, `marker`, `symbol` or `filter`.
- For each element, fill and stroke are chosen separately. Its own rule is used when one applies in the
current theme and version; otherwise the rule of the innermost enclosing group that has one that applies;
otherwise the colour stays as drawn.
- Among several rules of one element that apply: theme + version beats theme, theme beats version, version
beats no limit; then a rule with `fill` / `stroke` beats one without; then the first one written.
- The chosen colour replaces a plain colour written in the element's `fill` / `stroke` attribute or in its
`style` attribute. Left as written: `none`, `transparent`, `currentColor`, `inherit`, `url(…)` (gradients),
`var(…)`, and colours with their own alpha (`#rrggbbaa`, `#rgba`, `rgba(…)`, `hsla(…)`).
- A `path`, `rect`, `circle`, `ellipse`, `polygon`, `polyline`, `text` or `use` with no `fill` written gets
the chosen fill added. A `line` does not. A stroke is never added: a rule colours a stroke only where a
`stroke` with a plain colour is written on that element itself (not only on its group).
- So, to be safe: write `fill="#rrggbb"` (and `stroke="#rrggbb"` where there is an outline) on every element
that a rule should colour. These written colours are also what other SVG viewers show.
- A `stop-color` or `color` written on a covered element is replaced too (by the fill colour, else by the
stroke colour). A gradient with a rule in its own id has its stops recoloured.
- Theme rules are not applied to an SVG with more than 50,000 tags; it is drawn as written.
- Do not colour the same element both ways. When an element with a `class` has a rule — its own or its
group's — the app writes the rule's colour into the element's `style` attribute, which beats the sheet
(unless the sheet says `!important`): a group's rule so overrides the sheet colours of the classed shapes
inside it. On an element without a `class` the sheet wins wherever one of its selectors reaches it.
### 6.3 Other ways the app reads (do not use unless asked)
- A `<desc>` directly inside an element, beginning with `Intuition Check`, then one rule per line as
`limits: colour` (e.g. `dark stroke: text`, `light: #1e88e5`); a first-line form `Intuition Check: text`.
- Inkscape swatches (a one-colour gradient whose label or id holds rules).
### 6.4 If the user wants to edit the file in Inkscape later
Inkscape keeps both ways, in Inkscape SVG and in Plain SVG.
- A style sheet (6.1): Inkscape keeps the `<style>` element with the `var()` inside it. Write `var()` only
there, never in a `style` attribute (Inkscape removes such an attribute when the element is edited), and add
`!important` to every colour in the sheet (Inkscape writes colours into the element's `style` attribute,
which otherwise wins).
- Ids (6.2): Inkscape keeps ids. Labels are lost in Plain SVG.
## 7. Checklist — run before answering
For a set:
1. The answer is one code block holding one JSON object; it parses as strict JSON.
2. `"intuitionCheckSet": 1` is present; `name` is not empty.
3. `images` has 2 to 200 entries: exactly the number of pictures the user asked for, plus the cover if
there is one.
4. Every image has a non-empty `name` and an `svg` string.
5. In every `svg` string each `"` is written `\"`, and there is no raw line break.
6. Language codes are from section 3, spelled exactly. In a multilingual set every image and the set have
the same languages.
7. Captions follow section 4: none by default; one language only if asked, with `lang` on the `<text>`
two named languages: two lines, both shown, each with `lang`; three or more, or all, only if the user
named them or asked for all. Then: the default caption has `lang`; the codes in the hiding rule = the
codes in the showing rule = the codes on the captions, each on exactly one `<text>`; the same style sheet
in every picture but the cover; every image has `nameTranslations` with the same languages and words.
8. A cover only if asked: one picture with `"cover": true`, last, plus at least 2 other pictures.
9. The answer is whole: the JSON ends with its `}`, and no picture was shortened or left for later.
10. Beside the code block: the sentence on how to use it, and what you assumed (section 1).
For every SVG (in a set or alone):
11. Starts with `<svg`, has `xmlns="http://www.w3.org/2000/svg"` and `viewBox="0 0 W H"` in double quotes,
ends with `</svg>`.
12. Well-formed: all elements closed, `&` `<` `>` escaped in text.
13. None of: `script`, `foreignObject`, `a`, `style` with `@import`, `on…` attributes, `href` to anything
but `#id` or `data:image/…`, external fonts, HTML elements, nested `svg`, animation.
14. Far under 10,000,000 bytes.
15. The subject is large, simple, high-contrast; the picture differs clearly from every other picture of the
set; it is visible on a light and on a dark background; no caption crosses the drawing.
16. Theme rules only if asked; without them no id starts with `ic-` and the style sheet has no `.ic-` class
and no `--ic-` variable. With them: one method in the picture, the same in every picture of the set.
Style sheet: `<style>` itself holds a `--ic-` variable or one of the six classes (a `var()` only in a
`fill` attribute does nothing); the variable names are the five of section 6; every `var()` has a second
value. Ids: every word after `ic-` is a rule word; the element has its `fill` (and `stroke`) written.
Every fixed colour left on a themed plate was checked against the light and the dark values.
17. Ids are unique within the SVG.
## 8. Complete examples
### 8a. Minimal set, no captions
```json
{
"intuitionCheckSet": 1,
"name": "Shapes",
"images": [
{ "name": "Circle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"50\" r=\"30\" fill=\"#e53935\"/></svg>" },
{ "name": "Triangle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 18 L84 78 L16 78 Z\" fill=\"#1565c0\"/></svg>" }
]
}
```
### 8b. One picture with a caption in every language (section 4, option 4)
A star in a gold medallion with its caption in all 53 languages, built like the app's Zodiac set: the
"Theme" block turns the gold to bronze in light versions (section 6.1), the "Language" block picks the
caption, the "Lettering" block gives each script its font. Languages with the same word share a caption;
es-419 and fr-CA follow es and fr; a page with no language, or one not listed, shows the default caption,
"STAR" (the user's language is English here). The "Theme" block is not part of option 4: this medallion has
no plate, and its gold has to darken on a light background. Without a request for theme colours leave that
block out and draw an opaque plate (section 5, rule 8), as 8f does.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme. The app gives the root the classes ic-light or ic-dark (and ic-<theme>).
The gold is drawn for a dark background; on a light one it turns bronze. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
.ic-light .shadow-glyph { stroke-opacity: 0.27 }
/* Language. Every caption is in the file once; its class names the languages that
show it. The page's language (html lang) picks the caption; without a language,
or with one not listed here, the default one. fr-CA follows fr, es-419 follows es. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, bg, bn, ca, cs, da, de, el, es, fi, fr, gu, he, hi, hr, hu, id, it, ja, kk,
kn, ko, lt, ml, mr, ms, nb, nl, or, pa, pl, pt-BR, pt-PT, ro, ru, sk, sl, sv, ta,
te, th, tr, uk, ur, vi, zh-Hans, zh-Hant) .default { display: none }
:lang(ar) .ar, :lang(bg) .bg, :lang(bn) .bn, :lang(ca) .ca, :lang(cs) .cs, :lang(da) .da,
:lang(de) .de, :lang(el) .el, :lang(es) .es, :lang(fi) .fi, :lang(fr) .fr, :lang(gu) .gu,
:lang(he) .he, :lang(hi) .hi, :lang(hr) .hr, :lang(hu) .hu, :lang(id) .id, :lang(it) .it,
:lang(ja) .ja, :lang(kk) .kk, :lang(kn) .kn, :lang(ko) .ko, :lang(lt) .lt, :lang(ml) .ml,
:lang(mr) .mr, :lang(ms) .ms, :lang(nb) .nb, :lang(nl) .nl, :lang(or) .or, :lang(pa) .pa,
:lang(pl) .pl, :lang(pt-BR) .pt-BR, :lang(pt-PT) .pt-PT, :lang(ro) .ro, :lang(ru) .ru,
:lang(sk) .sk, :lang(sl) .sl, :lang(sv) .sv, :lang(ta) .ta, :lang(te) .te, :lang(th) .th,
:lang(tr) .tr, :lang(uk) .uk, :lang(ur) .ur, :lang(vi) .vi, :lang(zh-Hans) .zh-Hans,
:lang(zh-Hant) .zh-Hant
{ display: inline }
/* Lettering. A script whose letters join or stack gets no letter-spacing; every script
outside Latin, Cyrillic and Greek gets its own font. Telugu at 500: iOS has Kohinoor
Telugu only up to Medium, and WebKit would fake a 600 from it. */
.ar, .ur, .he, .bn, .gu, .hi, .mr, .kn, .ml, .or, .pa, .ta, .te, .th { letter-spacing: 0 }
.ar, .ur { font-family: system-ui, -apple-system, Geeza Pro, sans-serif }
.he { font-family: system-ui, -apple-system, Arial Hebrew, sans-serif }
.bn { font-family: Kohinoor Bangla, Bangla Sangam MN, sans-serif }
.gu { font-family: Kohinoor Gujarati, Gujarati Sangam MN, sans-serif }
.hi, .mr { font-family: Kohinoor Devanagari, Devanagari Sangam MN, sans-serif }
.kn { font-family: Noto Sans Kannada, Kannada Sangam MN, sans-serif }
.ml { font-family: Malayalam Sangam MN, Malayalam MN, sans-serif }
.or { font-family: Noto Sans Oriya, Oriya Sangam MN, sans-serif }
.pa { font-family: Mukta Mahee, Gurmukhi Sangam MN, sans-serif }
.ta { font-family: Tamil Sangam MN, InaiMathi, Tamil MN, sans-serif }
.te { font-family: Kohinoor Telugu, Telugu Sangam MN, sans-serif }
.th { font-family: Thonburi, Noto Sans Thai, sans-serif }
.ja { font-family: Hiragino Sans, Hiragino Kaku Gothic ProN, sans-serif }
.ko { font-family: Apple SD Gothic Neo, Noto Sans KR, sans-serif }
.zh-Hans { font-family: PingFang SC, Heiti SC, sans-serif }
.zh-Hant { font-family: PingFang TC, Heiti TC, sans-serif }
.te { font-weight: 500 }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The captions. Drawn twice at the end of the file: the shadow, then the gold. A long
word would carry its own smaller font-size and letter-spacing. Urdu says lang="ur" and is
drawn in Nastaliq. zh-Hans and zh-Hant keep two captions
with the same word: each takes its own font. -->
<g id="caption" class="caption" text-anchor="middle" font-family="Helvetica Neue, Helvetica, -apple-system, sans-serif" font-weight="600" font-size="52" letter-spacing="6.8">
<text class="default" x="259.4" y="466">STAR</text>
<text class="ar" x="259.4" y="466">نجمة</text>
<text class="bg ru" x="259.4" y="466">ЗВЕЗДА</text>
<text class="bn" x="259.4" y="466">তারা</text>
<text class="ca es" x="259.4" y="466">ESTRELLA</text>
<text class="cs" x="259.4" y="466">HVĚZDA</text>
<text class="da nb" x="259.4" y="466">STJERNE</text>
<text class="de" x="259.4" y="466">STERN</text>
<text class="el" x="259.4" y="466">ΑΣΤΕΡΙ</text>
<text class="fi" x="259.4" y="466">TÄHTI</text>
<text class="fr" x="259.4" y="466">ÉTOILE</text>
<text class="gu" x="259.4" y="466">તારો</text>
<text class="he" x="259.4" y="466">כוכב</text>
<text class="hi mr" x="259.4" y="466">तारा</text>
<text class="hr" x="259.4" y="466">ZVIJEZDA</text>
<text class="hu" x="259.4" y="466">CSILLAG</text>
<text class="id ms" x="259.4" y="466">BINTANG</text>
<text class="it" x="259.4" y="466">STELLA</text>
<text class="ja" x="259.4" y="466">星</text>
<text class="kk" x="259.4" y="466">ЖҰЛДЫЗ</text>
<text class="kn" x="259.4" y="466">ನಕ್ಷತ್ರ</text>
<text class="ko" x="259.4" y="466">별</text>
<text class="lt" x="259.4" y="466">ŽVAIGŽDĖ</text>
<text class="ml" x="259.4" y="466">നക്ഷത്രം</text>
<text class="nl" x="259.4" y="466">STER</text>
<text class="or" x="259.4" y="466">ତାରା</text>
<text class="pa" x="259.4" y="466">ਤਾਰਾ</text>
<text class="pl" x="259.4" y="466">GWIAZDA</text>
<text class="pt-BR pt-PT" x="259.4" y="466">ESTRELA</text>
<text class="ro" x="259.4" y="466">STEA</text>
<text class="sk" x="259.4" y="466">HVIEZDA</text>
<text class="sl" x="259.4" y="466">ZVEZDA</text>
<text class="sv" x="259.4" y="466">STJÄRNA</text>
<text class="ta" x="259.4" y="466">நட்சத்திரம்</text>
<text class="te" x="259.4" y="466">నక్షత్రం</text>
<text class="th" x="259.4" y="466">ดาว</text>
<text class="tr" x="259.4" y="466">YILDIZ</text>
<text class="uk" x="259.4" y="466">ЗІРКА</text>
<text class="ur" lang="ur" x="259.4" y="466">ستارہ</text>
<text class="vi" x="259.4" y="466">NGÔI SAO</text>
<text class="zh-Hans" x="259.4" y="466">星星</text>
<text class="zh-Hant" x="259.4" y="466">星星</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<path class="shadow-glyph" d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#0E0D22" stroke-width="19" stroke-linejoin="round" opacity="0.45" transform="translate(3,5)"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="url(#gold)" stroke-width="19" stroke-linejoin="round"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#FFF6DA" stroke-width="4.5" stroke-linejoin="round" opacity="0.4" transform="translate(-2,-3)"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
<use href="#caption" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(2,4)"/>
<use href="#caption" class="gold-text" fill="#CA9E41"/>
</svg>
```
In a set this SVG is the image's `svg` string (on one line, `"` written `\"`). The image's `name` and
`nameTranslations` carry the same words as the captions, in ordinary case ("Star", "Звезда", "Étoile", …).
Every picture of the set lists the same languages.
### 8c. The cover of the set in 8b
The same medallion with a question mark instead of the subject (section 2, "The cover"); in a set it gets
`"cover": true`. Two marks: `?`, and `؟` for Arabic and Urdu. A cover may show anything else the user asks
for; this one is what to draw when the user does not say.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme: the same rules as every picture of the set. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
/* Language. Two marks: "?" for every language, the Arabic question mark for Arabic and Urdu. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, ur) .default { display: none }
:lang(ar) .ar, :lang(ur) .ur
{ display: inline }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The question mark, where the other pictures have their subject. Drawn twice below: the
shadow, then the gold. The marks differ in shape (Arabic ؟ in Naskh, Urdu ؟ in Nastaliq), so
each has its own size and place: the same ink box as "?". -->
<g id="mark" class="caption" text-anchor="middle" font-family="system-ui, -apple-system, sans-serif" font-weight="bold">
<text class="default" x="258" y="323.8" font-size="323">?</text>
<text class="ar" lang="ar" x="254.2" y="329.6" font-size="294.1">؟</text>
<text class="ur" lang="ur" x="258.4" y="325.6" font-size="317.3">؟</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<use href="#mark" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(3,5)"/>
<use href="#mark" class="gold-text" fill="#E2C378"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
</svg>
```
### 8d. One SVG picture with theme colours (style sheet)
The plate takes the theme's surface colour, the moon the accent colour, soft in dark versions; the second
values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<style>
.plate { fill: var(--ic-surface, #dddddd) }
.moon { fill: var(--ic-accent, #e53935) }
.ic-dark .moon { fill: var(--ic-soft, #e53935) }
.cut { fill: var(--ic-surface, #dddddd) }
</style>
<rect class="plate" width="100" height="100" rx="12"/>
<circle class="moon" cx="46" cy="48" r="28"/>
<circle class="cut" cx="59" cy="39" r="23"/>
</svg>
```
### 8e. One SVG picture with theme colours (ids)
The plate takes the theme's surface colour, the house the text colour, the door the accent colour; the sun is
accent in light versions and soft in dark versions. The written `fill` values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<rect id="ic-surface" width="100" height="100" rx="12" fill="#eeeeee"/>
<g id="ic-text">
<path d="M16 52 L50 22 L84 52 Z" fill="#333333"/>
<rect x="26" y="52" width="48" height="30" fill="#333333"/>
</g>
<rect id="ic-accent" x="44" y="60" width="12" height="22" fill="#e53935"/>
<circle id="ic-light-accent-dark-soft" cx="82" cy="18" r="8" fill="#f9a825"/>
</svg>
```
### 8f. A small set with captions in three languages, and a cover
The user writes in English and asks for captions in English, German and Russian, and for a cover. The
default caption is the English word, so `en` is in no rule. Ordinary case, `sans-serif`, no letter-spacing;
the long Russian word has its own smaller size. Both pictures to guess have the same style sheet. The
cover's mark follows the app language, whatever the languages of the captions: `؟` in Arabic and Urdu, `?`
in every other. No theme rules: every picture has an opaque plate.
```json
{
"intuitionCheckSet": 1,
"name": "Simple shapes",
"nameTranslations": {"de": "Einfache Formen", "ru": "Простые фигуры"},
"images": [
{ "name": "Circle", "nameTranslations": {"de": "Kreis", "ru": "Круг"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"42\" r=\"28\" fill=\"#e53935\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Circle</text><text class=\"de\" x=\"50\" y=\"91\">Kreis</text><text class=\"ru\" x=\"50\" y=\"91\">Круг</text></g></svg>" },
{ "name": "Triangle", "nameTranslations": {"de": "Dreieck", "ru": "Треугольник"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 12 L82 70 L18 70 Z\" fill=\"#1565c0\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Triangle</text><text class=\"de\" x=\"50\" y=\"91\">Dreieck</text><text class=\"ru\" x=\"50\" y=\"91\" font-size=\"10.5\">Треугольник</text></g></svg>" },
{ "name": "Question mark", "nameTranslations": {"de": "Fragezeichen", "ru": "Знак вопроса"}, "cover": true, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(ar,ur) .default{display:none}:lang(ar) .ar,:lang(ur) .ur{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#eeeeee\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"system-ui, -apple-system, sans-serif\" font-weight=\"bold\" fill=\"#555555\"><text class=\"default\" x=\"50.4\" y=\"72.4\" font-size=\"64\">?</text><text class=\"ar\" lang=\"ar\" x=\"49.6\" y=\"73.7\" font-size=\"58\">؟</text><text class=\"ur\" lang=\"ur\" x=\"50.5\" y=\"72.8\" font-size=\"62.9\">؟</text></g></svg>" }
]
}
```
Índice
Guias breves sobre as principais coisas que pode fazer no Intuition Check e sobre como nos contactar.
- Intuição
- Como funciona a aplicação
- Conjuntos para adivinhar
- Enviar conjuntos
- Jogo com parceiro
- Estatísticas
- Como ler os seus resultados
- O seu estado
- Apresentação e funcionalidades
- Hora grátis e assinatura
- Os seus dados
- Os seus próprios conjuntos criados com IA
- Histórico de versões
- Política de Privacidade
Se algo não estiver a funcionar
Escreva-nos para [email protected] e responderemos. A forma mais rápida é usar Definições → Informações → Contactar suporte: abre um rascunho na sua aplicação de e-mail com a versão e a compilação da aplicação, o modelo do seu dispositivo e a versão do iOS já preenchidos.
Não há formulário de suporte nem sistema de pedidos. A aplicação não recolhe nada, por isso tudo o que precisarmos de saber tem de vir de si.
O que incluir na mensagem
- O que fez, o que esperava e o que aconteceu em vez disso.
- A versão da aplicação, em Definições → Informações → Versão.
- O modelo do seu dispositivo e a versão do iOS.
Um rascunho criado com “Contactar suporte” já inclui a versão, o modelo e a versão do iOS.
Resolução de problemas
- Os dois dispositivos não se conseguem encontrar: Se os dispositivos não se encontrarem.
- As estatísticas desapareceram depois de voltar a abrir a aplicação: Guardar as suas estatísticas.
- Não aparece nada nas estatísticas: O que é registado.
- Falta um conjunto no seletor: O seletor de conjuntos.
Fontes
- Kahneman, D., & Klein, G. (2009). American Psychologist, 64(6), 515–526. Conditions for intuitive expertise: A failure to disagree [Condições para a perícia intuitiva: um desacordo que não aconteceu]
Uma revisão conjunta de dois dos principais investigadores da intuição, de escolas opostas, na revista da Associação Americana de Psicologia.
https://doi.org/10.1037/a0016755 - Cardeña, E. (2018). American Psychologist, 73(5), 663–677. The experimental evidence for parapsychological phenomena: A review [As provas experimentais de fenómenos parapsicológicos: uma revisão]
Uma revisão de muitos estudos, feita por um psicólogo que considera as provas fortes, na revista da Associação Americana de Psicologia.
https://doi.org/10.1037/amp0000236 - Reber, A. S., & Alcock, J. E. (2020). American Psychologist, 75(3), 391–399. Searching for the impossible: Parapsychology's elusive quest [À procura do impossível: a meta fugidia da parapsicologia]
A resposta à revisão acima, de dois psicólogos que rejeitam estes efeitos, na mesma revista.
https://doi.org/10.1037/amp0000486 - Sheldrake, R. (2000). Journal of the Society for Psychical Research, 64, 224–232. Telepathic telephone calls: Two surveys [Chamadas telefónicas telepáticas: dois inquéritos]
Inquéritos telefónicos a agregados familiares escolhidos ao acaso em Londres e em Bury (Inglaterra), feitos por um investigador que defende que a telepatia existe, numa revista de parapsicologia.
https://www.sheldrake.org/files/pdfs/papers/Telepathic-Telephone-Calls-Two-Surveys.pdf - Brown, D. J., & Sheldrake, R. (2001). Journal of Parapsychology, 65, 145–156. The anticipation of telephone calls: A survey in California [A antecipação de chamadas telefónicas: um inquérito na Califórnia]
Um inquérito telefónico a 200 pessoas escolhidas ao acaso, feito pelo mesmo investigador com um coautor, numa revista de parapsicologia.
https://www.sheldrake.org/files/pdfs/papers/The-Anticipation-of-Telephone-Calls-A-Survey-in-California.pdf - Cottrell, J. E., Winer, G. A., & Smith, M. C. (1996). Developmental Psychology, 32(1), 50–61. Beliefs of children and adults about feeling stares of unseen others [Crenças de crianças e adultos sobre sentir o olhar de pessoas que não estão à vista]
Três estudos com crianças e adultos, numa revista da Associação Americana de Psicologia.
https://doi.org/10.1037/0012-1649.32.1.50 - Born, J., Hansen, K., Marshall, L., Mölle, M., & Fehm, H. L. (1999). Nature, 397, 29–30. Timing the end of nocturnal sleep [Marcar a hora do fim do sono noturno]
Uma experiência com 15 voluntários, na revista Nature.
https://doi.org/10.1038/16166 - Sio, U. N., & Ormerod, T. C. (2009). Psychological Bulletin, 135(1), 94–120. Does incubation enhance problem solving? A meta-analytic review [A incubação melhora a resolução de problemas? Uma revisão meta-analítica]
Uma revisão que combina os resultados de muitas experiências, numa revista da Associação Americana de Psicologia.
https://doi.org/10.1037/a0014212 - Wagner, U., Gais, S., Haider, H., Verleger, R., & Born, J. (2004). Nature, 427, 352–355. Sleep inspires insight [O sono inspira a compreensão súbita]
Uma experiência na revista Nature; repetições posteriores desta experiência deram resultados divergentes.
https://doi.org/10.1038/nature02223 - Ambady, N., & Rosenthal, R. (1993). Journal of Personality and Social Psychology, 64(3), 431–441. Half a minute: Predicting teacher evaluations from thin slices of nonverbal behavior and physical attractiveness [Meio minuto: prever as avaliações de professores a partir de fragmentos breves de comportamento não verbal e da atratividade física]
Três estudos – o principal com 13 professores – numa revista da Associação Americana de Psicologia.
https://doi.org/10.1037/0022-3514.64.3.431 - Diaconis, P., & Mosteller, F. (1989). Journal of the American Statistical Association, 84(408), 853–861. Methods for studying coincidences [Métodos para estudar coincidências]
Um artigo de dois estatísticos sobre a forma como surgem as coincidências, na revista da Associação Americana de Estatística.
https://doi.org/10.1080/01621459.1989.10478847 - Wilson, T. D., Lisle, D. J., Schooler, J. W., Hodges, S. D., Klaaren, K. J., & LaFleur, S. J. (1993). Personality and Social Psychology Bulletin, 19(3), 331–339. Introspecting about reasons can reduce post-choice satisfaction [Refletir sobre as razões pode reduzir a satisfação com a escolha feita]
Uma experiência, numa revista de psicologia social.
https://doi.org/10.1177/0146167293193010 - Dunn, B. D., Galton, H. C., Morgan, R., Evans, D., Oliver, C., Meyer, M., Cusack, R., Lawrence, A. D., & Dalgleish, T. (2010). Psychological Science, 21(12), 1835–1844. Listening to your heart: How interoception shapes emotion experience and intuitive decision making [Escutar o coração: como a interoceção molda a experiência emocional e a tomada de decisão intuitiva]
Duas experiências, numa revista da Associação para a Ciência Psicológica.
https://doi.org/10.1177/0956797610389191
Créditos
Ilustrações das cartas de jogar por Adrian Kennard, disponibilizadas sob CC0 Public Domain. Gerador e código-fonte em me.uk/cards.