Intuition Check
Een eenvoudige app die je privacy respecteert, om je intuïtie te testen en te trainen, op iPhone, iPad en Mac-computers met Apple silicon. Oefen je onderbuikgevoel met speelkaarten, getallen of afbeeldingen – solo of met een partner in de buurt.
Download in de App Store → Je eigen sets gemaakt met AI →Intuïtie
Wat intuïtie is
Intuïtie is iets weten zonder te kunnen zeggen hoe je het weet: een vermoeden, een buikgevoel, een plotselinge zekerheid.
Eén soort ervan beschrijven psychologen goed – ervaring die sneller werkt dan het denken. Als je iets al vaak hebt gedaan, merk je een patroon op voordat je het onder woorden kunt brengen: eerst komt het gevoel, pas later de woorden.1
Veel mensen beschrijven ook een tweede soort: iets weten wat geen enkele ervaring hun had kunnen vertellen – wie er belt voordat de telefoon een naam laat zien, of welke kaart er met de achterkant naar boven ligt. Of deze soort bestaat, staat in de wetenschap ter discussie.23 Juist deze tweede soort kun je met de app testen, met waarden die willekeurig worden gekozen.
Hoe intuïtie zich kan uiten
Veel mensen kennen zulke momenten:
- Je denkt aan iemand en even later belt die je op.
- Je pakt je telefoon om een vriend te bellen, en hij gaat over in je hand – het is precies die vriend.
- Je wordt wakker, een paar minuten voordat de wekker afgaat.
- Je weet wie er belt voordat je op het scherm kijkt.
- Je denkt terug aan iemand die je al lang niet hebt gezien, en nog dezelfde dag belt die persoon je op.
- Je eerste indruk van iemand blijkt te kloppen.
- De oplossing van een probleem komt vanzelf – ’s ochtends, onder de douche, tijdens een wandeling.
- Je voelt dat iemand naar je kijkt, je draait je om – en er kijkt inderdaad iemand.
In telefonische enquêtes onder willekeurig gekozen mensen in Engeland en in Californië zei tussen 65% en 78% dat ze iemand hadden gebeld die naar eigen zeggen net op het punt stond hen te bellen, en 47–49% dat ze zonder enige aanwijzing hadden geweten wie er belde.45 De meeste volwassenen geloven dat ze kunnen voelen wanneer iemand die ze niet kunnen zien, naar hen kijkt.6
Voor sommige daarvan is een verklaring bekend. Het lichaam kan bijhouden hoe laat je verwacht wakker te worden: in één experiment begon ongeveer een uur vóór de wektijd die de deelnemers te horen hadden gekregen, een hormoon te stijgen dat het lichaam op het ontwaken voorbereidt.7 Een pauze kan helpen bij een probleem: in veel experimenten losten mensen problemen beter op nadat ze die een tijdje hadden laten rusten,8 en in één onderzoek zorgde een nacht slaap ervoor dat het aandeel mensen dat een verborgen regel ontdekte waardoor een taak sneller op te lossen was, meer dan verdubbelde.9 En een eerste indruk kan kloppen: onbekenden die in totaal 30 seconden naar een docent keken, met het geluid uit, beoordeelden die docent in grote lijnen net zo als de studenten van die docent aan het eind van het semester.10
Eén keer, twee keer – of keer op keer
Eén of twee keer is zo’n toevalligheid makkelijk af te doen als toeval. Gebeurt het keer op keer, dan ligt het voor de hand om je af te vragen of er meer achter zit.
Het geheugen is hier een slechte teller. Het onthoudt de keren dat de telefoon ging en vergeet de vele keren dat je aan iemand dacht en er niets gebeurde. En met genoeg dagen, mensen en gedachten doen zich af en toe onvermijdelijk opvallende toevalligheden voor.11
Daarom helpt het om te tellen. In deze app is de kans om bij toeval goed te raden precies bekend: die hangt alleen af van hoeveel waarden er getrokken kunnen worden. De statistieken laten zien of je resultaten binnen de grenzen blijven van wat toeval zou opleveren, of daarvan afwijken – zie Je resultaten lezen.
Intuïtie in het dagelijks leven
Gevoelens en signalen van het lichaam spelen bij veel beslissingen een rol. Mensen die gewoon de poster kozen die ze mooi vonden, waren er drie weken later tevredener over dan mensen aan wie eerst was gevraagd op te sommen waarom ze elke poster wel of niet mooi vonden.12 In een ander experiment speelden mensen een kaartspel met vier stapels kaarten: twee stapels leverden op den duur winst op en twee verlies, maar de spelers kregen niet te horen welke. Het lichaam reageerde vóór elke keuze, en die signalen neigden bij verschillende mensen naar verschillende kanten: over het geheel genomen bij sommigen naar de winnende stapels en bij anderen naar de verliezende. Hoe goed iemand de signalen van het eigen lichaam waarnam, maten de onderzoekers af aan hoe nauwkeurig die persoon de eigen hartslag kon voelen. Hoe nauwkeuriger dat gevoel, hoe nauwer de keuzes van die persoon de signalen van het lichaam volgden – ten goede of ten kwade.13
Intuïtie is het betrouwbaarst waar er echte patronen zijn waarop je kunt bouwen en waar je snel duidelijke feedback krijgt. Een sterk gevoel van zekerheid is op zichzelf geen teken dat je gelijk hebt.1
In goed contact staan met je intuïtie betekent dus twee dingen: je intuïtie opmerken en leren wanneer je erop kunt vertrouwen. Om te leren wanneer je erop kunt vertrouwen, noteer je tijdens het spelen je toestand: de statistieken vergelijken je ronden dan per toestand en per dagdeel, zodat je kunt zien wanneer het je beter lukt. Zie Je toestand.
Zit er meer achter?
De wetenschap is er niet uit of mensen iets kunnen weten wat geen enkele ervaring hun zou kunnen vertellen. In 2018 concludeerde een overzichtsartikel in het belangrijkste tijdschrift van de American Psychological Association dat het bewijs voor zulke effecten ongeveer even sterk is als het bewijs voor bevindingen die in de psychologie zijn aanvaard.2 Een reactie in hetzelfde tijdschrift betoogde dat zulke effecten onmogelijk zijn en dat de resultaten andere oorzaken moeten hebben.3 De vraag blijft open, en met de app kun je ernaar kijken aan de hand van je eigen ronden.
Hoe de app werkt
Een ronde
Kies een set – speelkaarten, getallen of een afbeeldingsset – en probeer een waarde aan te voelen voordat die wordt getoond. Onthul de waarde daarna en kijk of je het goed had. De app telt je treffers en vergelijkt ze met wat puur toeval zou opleveren.
Passieve en actieve modus
De app heeft twee modi:
- Passieve intuïtie – de waarde is al gekozen en verborgen. Je probeert aan te voelen welke het is.
- Actieve intuïtie – er is niets gekozen totdat je de waarde onthult. Je probeert een waarde te laten uitkomen door die te wensen.
De statistieken tellen de twee modi apart, zodat je kunt zien welke beter bij je past.
Drie manieren om te spelen
Met de kiezers bovenaan in de hoofdweergave kies je de speelstijl en de modus. Dezelfde keuzes vind je in Instellingen → Speelstijl en modus.
Eén voor één
Eén waarde tegelijk. Tik om die te onthullen, tik nog eens om die weer te verbergen en onthul dan de volgende. Staat ‘Onthul zonder te verbergen’ aan in Instellingen → Eén voor één, dan toont elke tik meteen de volgende waarde. ‘Toon hint’ zet onder de waarde een regel met een aanwijzing.
Staat ‘Methode’ bij ‘Antwoorden bijhouden’ op ‘Antwoord invoeren’ (zo staat het in het begin), dan vraagt de app bij elke onthulling eerst om je antwoord en markeert hij de ronde zelf. Zie Wat er wordt vastgelegd.
Snelkeuze
Alle waarden van de set staan samen in één raster. Elke tik is een aparte ronde. In de actieve modus wordt de waarde getrokken op het moment dat je tikt; in de passieve modus wordt die vooraf getrokken, direct na je vorige tik. Een treffer kan worden aangegeven met een groene flits en een trilling.
Getallensets met meer dan 1.000 waarden hebben geen raster: verklein het getallenbereik in de instellingen van de set, of kies de speelstijl ‘Eén voor één’.
Serie
Kies in de actieve modus de waarde die je wilt, wens die en tik erop: de app trekt een serie waarden en telt hoeveel daarvan overeenkomen met de waarde waarop je tikte. Een serie kan 2 tot 12 trekkingen lang zijn, of 100, 1.000, 10.000, 100.000, 1 miljoen of 10 miljoen. De lengte stel je in de hoofdweergave in. In Instellingen → Serie spreidt de schuifknop ‘Serieduur’ de trekkingen over maximaal 10 seconden; bij nul zijn er geen pauzes. Elke serie komt als één registratie in de statistieken.
Kies je de speelstijl ‘Serie’, dan zet de app de modus op actieve intuïtie.
Speelkaarten en getallen
Een set speelkaarten gebruikt 36 of 52 kaarten, met of zonder jokers. Een set getallen gebruikt getallen van maximaal 9 cijfers – het maximale aantal cijfers kies je zelf. Beide stel je in de weergave met de instellingen van de set in: tik in de hoofdweergave op het tandwiel naast de kiezer.
Vrij zicht
Houd je vinger op een willekeurige plek in de hoofdweergave om de kiezers, de knoppenbalk, de toestandsbalk en de hint te verbergen. Houd je vinger er nog eens op om ze terug te halen. De rondetellers en het resultaat blijven zichtbaar.
In Instellingen → Weergave en feedback zet ‘Toon knop’ onder ‘Vrij zicht’ een knop met een oog in de knoppenbalk – tik erop om vrij zicht aan te zetten – en zorgt ‘Onthoud vrij zicht’ ervoor dat vrij zicht aanblijft, ook na een nieuwe start van de app.
Rondetellers
De hoofdweergave kan laten zien hoeveel ronden je hebt gespeeld en hoe je ervoor staat: één teller en één resultaat voor elke combinatie van modus en speelstijl, met een knop die de teller op nul zet en het resultaat wist. Als je naar een andere set overschakelt, worden ook alle tellers op nul gezet en alle resultaten gewist.
Wil je de rondetellers en resultaten ook na een nieuwe start van de app houden? Schakel dan ‘Bewaar rondetellers en resultaten’ in via Instellingen → Statistieken. Die schakelaar is beschikbaar zolang ‘Bewaar statistieken op dit apparaat’ aanstaat.
Sets
Een set is datgene waaruit je raadt: speelkaarten, getallen of een afbeeldingsset. In het begin toont de hoofdweergave alleen ‘Getallen’ en ‘Speelkaarten’. De andere sets die bij de app horen, voeg je toe door in de hoofdweergave op naast de kiezer te tikken.
De setkiezer
De kiezer bovenaan in de hoofdweergave toont je sets. Bij de standaardinstelling van ‘Stijl van kiezer’ toont de kiezer knoppen wanneer er een of twee sets te tonen zijn, en vanaf drie de naam van de huidige set, die een lijst van de sets opent. Als ‘Aparte weergave’ is gekozen bij ‘Stijl van kiezer’, opent de kiezer altijd deze lijst.
Elke set heeft een eigen schakelaar ‘Gebruik’. Een set waarvan deze schakelaar uitstaat, wordt nergens aangeboden – niet in de kiezer in de hoofdweergave, niet in het partnerspel, niet in de statistieken – maar blijft wel in je lijst met sets staan in Instellingen → Sets → Beheer sets, en zet je de schakelaar weer aan, dan komen ook de statistieken van de set terug.
De knop naast de kiezer opent de weergave ‘Set toevoegen’. Daar staan de extra sets die bij de app horen, klaar om aan de hoofdweergave te worden toegevoegd; daaronder staan een knop om een lege set te maken, waaraan je later je eigen afbeeldingen kunt toevoegen, en het blok ‘Je AI-assistent’ om een set toe te voegen die een AI-assistent heeft gemaakt. De tandwielknop naast de kiezer opent de instellingen van de set die gekozen is. Beide knoppen kun je verbergen in Instellingen → Sets met ‘Toon knop om set toe te voegen’ en ‘Toon knop voor setinstellingen’.
Kant-en-klare sets
Tik in de hoofdweergave op naast de kiezer – of open Instellingen → Sets → Beheer sets, tik op en kies ‘Kant-en-klare sets’. Open een set en tik op ‘Voeg toe aan mijn sets’.
De set die je toevoegt, is je eigen kopie: je kunt de naam wijzigen, de afbeeldingen in een andere volgorde zetten, sommige ervan niet in het spel gebruiken, de set met een partner spelen of naar iemand sturen.
Een set met je eigen afbeeldingen
Vanuit de hoofdweergave: tik op naast de kiezer en daarna op ‘Lege afbeeldingsset’ onder de kant-en-klare sets. Laat de naam ‘Mijn afbeeldingen’ staan of typ een andere, en tik op ‘Maak aan’. De app schakelt over naar de nieuwe set en opent die.
Of open Instellingen → Sets → Beheer sets, tik op en kies ‘Lege afbeeldingsset’, geef de set daarna een naam en tik op ‘Maak aan’. De nieuwe set wordt geopend.
Tik in de set op : voeg afbeeldingen toe uit Foto’s of Bestanden (meerdere tegelijk), maak ze een voor een met de Camera of plak een gekopieerde afbeelding of SVG met ‘Plak van klembord’.
Namen van afbeeldingen
Tik in de weergave van de set op een afbeelding om die groter te zien. Het veld eronder is de Naam: typ een naam, wijzig die of maak het veld leeg. Een afbeelding die uit Bestanden is toegevoegd, begint met de bestandsnaam zonder extensie; een afbeelding uit Foto’s, van de Camera of via ‘Plak van klembord’ begint zonder naam. In een set met namen in meerdere talen bevat Namen per taal onder het veld de naam van de afbeelding in elk van die talen. Onder de afbeelding zie je het formaat en de grootte van het bestand dat de app bewaart.
Een AI-assistent kan afbeeldingen en hele sets voor je maken: Je eigen sets gemaakt met AI.
Volgorde, indeling en wat er meedoet
In de weergave van de set zelf kun je met ‘Rangschik’ de afbeeldingen in een nieuwe volgorde slepen en voor het raster ‘Afbeeldingen per rij’, ‘Uitlijning’ en ‘Toon volledig’ instellen.
Houd je vinger op een afbeelding voor meer opties:
- Met ‘Gebruik niet in het spel’ blijft de afbeelding in de set, maar wordt die nooit getrokken. Met ‘Gebruik in het spel’ doet die weer mee.
- Met de optie Markeer als ‘?’-plaatsaanduiding wordt die afbeelding getoond zolang een waarde in de speelstijl ‘Eén voor één’ nog verborgen is. Zelf wordt die afbeelding nooit getrokken. Een set kan maar één ‘?’-plaatsaanduiding hebben.
Naam wijzigen en set verwijderen
De naam is het eerste veld in de weergave van de set. Bij kant-en-klare sets verander je daarmee de naam in de huidige taal van de app; de namen in andere talen staan onder ‘Namen per taal’.
Om een set te verwijderen, veeg je in je lijst met sets in Instellingen → Sets → Beheer sets over de set of houd je je vinger erop, en kies je ‘Verwijder’. De app vraagt eerst om bevestiging. De statistieken van de set worden samen met de set verwijderd.
Sets versturen
Een set versturen
Een set met je eigen afbeeldingen kan als één bestand met de extensie .guesset worden verstuurd. Het bestand bevat de afbeeldingen, hun volgorde, de indeling en de namen van de set, en ook welke afbeeldingen meedoen en welke de ‘?’-plaatsaanduiding is. ‘Speelkaarten’ en ‘Getallen’ zijn in de app ingebouwd en kunnen niet worden verstuurd.
- Open Instellingen → Sets → Beheer sets.
- Houd je vinger op de set en kies ‘Exporteer…’. De deelknop in de set doet hetzelfde.
- Kies hoe je de set verstuurt: Mail, Berichten, AirDrop, Bestanden of een andere app.
Om een set te spelen met iemand in de buurt, heb je geen bestand nodig: zie Spelen met je eigen afbeeldingen.
Een set openen die iemand je heeft gestuurd
Tik op een .guesset-bestand in Mail, Berichten of Bestanden, of accepteer er een dat via AirDrop is verstuurd, en open het met Intuition Check. De set wordt je eigen, aparte kopie en verschijnt onderaan je lijst en in de kiezer.
Een bestand dat al op het apparaat is bewaard, kun je ook vanuit de app importeren: tik in Instellingen → Sets → Beheer sets op en kies ‘Importeer uit bestand’.
Partnerspel
Zo werkt het
Twee apparaten spelen samen: de een kiest een waarde, de ander probeert die te raden. De apparaten communiceren alleen met elkaar (van apparaat tot apparaat als ze dicht bij elkaar zijn, of via een wifinetwerk dat ze delen). Ronden van het partnerspel komen niet in de statistieken terecht.
De verbinding
Zet wifi aan op beide apparaten. Op hetzelfde wifinetwerk werkt de verbinding het best, en de apparaten kunnen dan overal in dat netwerk zijn. Zonder gedeeld netwerk maken ze verbinding van apparaat tot apparaat – houd ze dan dicht bij elkaar.
De apparaten zoeken elkaar alleen zolang het partnerspel op allebei geopend is.
Starten
- Open op beide apparaten het partnerspel: tik op de knop met twee personen in de knoppenbalk van de hoofdweergave, of tik op ‘Open partnerspel’ in Instellingen → Partnerspel. Staat de knop er niet, schakel dan ‘Toon knop voor partnerspel’ in via Instellingen → Partnerspel.
- Elk apparaat toont ‘Partner in de buurt zoeken…’ en daarna het andere apparaat onder ‘Gevonden in de buurt:’. Ze maken vanzelf verbinding.
De eerste keer vraagt je apparaat of de app apparaten op je lokale netwerk mag vinden. Sta dat toe: zonder die toestemming kunnen de apparaten elkaar niet vinden.
Een ronde
- Kies onder ‘Spelen met:’ waarmee je wilt spelen – dat kan elk van je sets zijn die in gebruik is.
- Kies een rol: ‘Ik kies een kaart’ (of een getal, of een afbeelding) of ‘Ik probeer te raden’. Je partner krijgt de andere rol.
- Wie kiest, kiest een waarde; wie raadt, geeft een antwoord. Daarna tonen beide apparaten de gekozen waarde en het antwoord, met ‘Goed zo!’ of ‘Deze keer niet’.
- ‘Speel opnieuw’ brengt jullie allebei terug naar de eerste stap, om te kiezen waarmee jullie spelen en wie in de volgende ronde welke rol krijgt.
Spelen met je eigen afbeeldingen
Speel je met een van je afbeeldingssets, dan wordt je partner eerst gevraagd op ‘Download’ te tikken, tenzij je partner dezelfde set al heeft. Die kopie wordt alleen in het partnerspel gebruikt en verandert nooit iets aan de eigen sets van je partner. Alleen de afbeeldingen die bij je partner ontbreken, worden verstuurd.
Staat ‘Bewaar ontvangen afbeeldingssets’ aan in Instellingen → Partnerspel, dan begint het volgende spel met dezelfde partner zonder te wachten. Staat die schakelaar uit, dan worden ontvangen sets verwijderd zodra je het partnerspel verlaat. Ontvangen sets staan in Instellingen → Sets → Beheer sets onder ‘Ontvangen van partner’, waar je met ‘Voeg toe aan mijn sets’ een kopie maakt die helemaal van jou is.
De naam van je partner
Op iPhone en iPad zien apps alleen een algemene apparaatnaam zoals ‘iPhone’, dus twee apparaten kunnen er hetzelfde uitzien. Zodra je verbonden bent, tik je op het potlood naast de naam van je partner en typ je een naam die je zelf kiest. Die naam is alleen op jouw apparaat te zien.
Als de apparaten elkaar niet vinden
- Open het partnerspel op beide apparaten, met wifi aan.
- Verbind beide apparaten met hetzelfde wifinetwerk als dat kan; houd ze anders dicht bij elkaar.
- Gastnetwerken en openbare netwerken – in hotels, cafés en kantoren – blokkeren vaak het verkeer tussen apparaten. Probeer een ander netwerk, of helemaal geen netwerk met de apparaten naast elkaar.
- Heb je het verzoek om toegang tot het lokale netwerk geweigerd, zet de toegang dan weer aan in de iOS-app Instellingen: ga naar Privacy en beveiliging → Lokaal netwerk en schakel daar Intuition Check in.
- Als een apparaat onder ‘Gevonden in de buurt:’ verschijnt maar nooit verbinding maakt, verlaat dan op beide apparaten het partnerspel en open het opnieuw: het zoeken begint dan weer helemaal van voren.
- Er spelen telkens maar twee apparaten samen. Een derde apparaat blijft zoeken tot een van die twee het partnerspel verlaat.
Statistieken
Wat er wordt vastgelegd
In de speelstijlen ‘Snelkeuze’ en ‘Serie’ worden je ronden altijd vastgelegd. In de speelstijl ‘Eén voor één’ hangt dat af van de instelling ‘Methode’ onder ‘Antwoorden bijhouden’ in Instellingen → Eén voor één:
- ‘Antwoord invoeren’ – de standaardinstelling. Je kiest je antwoord vóór de onthulling, en de app rekent de ronde goed of fout.
- ‘Zelf markeren’ – tik na elke onthulling op ✓ of ✗. Een onthulling waarbij je het markeren overslaat, telt niet mee.
- ‘Uit’ – in de speelstijl ‘Eén voor één’ wordt niets vastgelegd.
Bij een set met maar één mogelijke waarde wordt niets vastgelegd. Ronden van het partnerspel worden nooit vastgelegd.
Je statistieken bekijken
Tik op de knop voor statistieken in de knoppenbalk van de hoofdweergave, of tik op ‘Bekijk statistieken’ in Instellingen → Statistieken. De statistieken gaan open voor de set, de speelstijl en de modus waarmee je speelt. De filters bovenaan verfijnen ze op ‘Periode’, ‘Set’, ‘Speelstijl’, ‘Modus’ en – zolang je je toestand noteert – ‘Toestand’.
Gedeelten die je niet nodig hebt, kun je uitschakelen in de weergave met de instellingen van de statistieken – open die met de knop voor instellingen in de statistiekweergave, of vanuit de hoofdweergave via Instellingen → Statistieken.
Wat de cijfers betekenen: Je resultaten lezen.
Je statistieken bewaren
In het begin worden statistieken alleen in het geheugen bewaard, voor de huidige sessie: ze worden gewist als de app stopt, ook als iOS de app op de achtergrond sluit. Om ze te bewaren, schakel je ‘Bewaar statistieken op dit apparaat’ in – bovenaan in de statistiekweergave of in Instellingen → Statistieken. De ronden van de huidige sessie worden daarbij ook bewaard. Ronden uit eerdere sessies van de app die nooit zijn bewaard, kunnen niet worden teruggehaald.
Zet je de schakelaar uit, dan worden de bewaarde statistieken verwijderd. De app vraagt het eerst, met ‘Statistieken niet meer bewaren?’; na een tik op ‘Verwijder bewaarde statistieken’ blijven alleen de ronden over die je hebt gespeeld sinds de app voor het laatst werd geopend, en alleen in het geheugen: ze zijn weg zodra de app wordt gesloten. Deze bewerking kan niet ongedaan worden gemaakt.
Wissen
Onderaan in de statistiekweergave:
- Wis alle statistieken voor ‘…’ – alle statistieken die zijn vastgelegd met de set die in het filter is gekozen.
- ‘Verwijder de gefilterde registraties (aantal: …)’ – alleen de registraties die de filters tonen.
- ‘Wis alle statistieken’ – alles.
De app vraagt je elk van deze verwijderingen te bevestigen, en geen ervan kan ongedaan worden gemaakt.
Exporteren
Tik op de deelknop in de knoppenbalk van de statistiekweergave en daarna op ‘Exporteer statistieken naar een tekstbestand’. Het bestand is een tabel (CSV) met precies de registraties die je filters tonen: één rij per ronde, of één per serie in de speelstijl ‘Serie’. Spreadsheetapps zoals Numbers kunnen het bestand openen. Het kan ook nuttig zijn om dit bestand aan je AI-assistent te laten zien en bijvoorbeeld te vragen: ‘In welke omstandigheden lijkt mijn intuïtie beter of slechter te werken?’
Je resultaten lezen
De statistieken tellen niet alleen treffers. Ze vergelijken je resultaten met wat willekeurig raden zou opleveren bij hetzelfde aantal mogelijke waarden, en zeggen in gewone woorden of je resultaat boven toeval ligt, eronder, of bij toeval past.
Je resultaat en toeval
Onder ‘Goede antwoorden’ staat ‘Je resultaat’ naast ‘Toeval zou uitkomen op’. Dezelfde 30% kan tegenovergestelde dingen betekenen: bij 3 mogelijke waarden komt willekeurig raden uit op ongeveer 33%, dus ligt 30% iets onder toeval; bij 52 kaarten komt het uit op ongeveer 2%, dus ligt 30% ver boven toeval. Het toevalsniveau gaat bij elke ronde uit van het aantal mogelijke waarden van die ronde.
De inschatting
De app geeft een inschatting: van ‘Past bij toeval’ via iets en duidelijk boven of onder toeval tot ‘Ver boven toeval’ of ‘Ver onder toeval’. Ook zegt de app hoe zeldzaam zo’n resultaat zou zijn bij willekeurig raden, bijvoorbeeld ‘ongeveer 1 op de 300 keer’.
Bij weinig ronden schommelen de resultaten sterk, alleen al door toeval. Daarom wordt de inschatting met elke nieuwe ronde stabieler.
Passieve en actieve intuïtie vergeleken
Heb je ronden in beide modi, dan toont ‘Passieve en actieve intuïtie’ de treffers en het trefpercentage van elke modus, zodat je kunt zien welke beter bij je past. In de speelstijl ‘Serie’ wordt dit gedeelte niet getoond.
Beste reeksen
‘Beste reeksen’ toont je langste reeksen van goede antwoorden op rij, met de dag en het tijdstip en de toestand die je had genoteerd. Een pauze langer dan ‘Max. pauze tussen ronden’ – die stel je in dat gedeelte in – breekt een reeks, net als een wijziging van je genoteerde toestand.
In de loop van de tijd
‘Trefpercentage per dag’ tekent je dagelijkse trefpercentage zodra je op twee verschillende dagen ronden hebt gespeeld. ‘Per dagdeel’ toont de ochtend, de middag, de avond en de nacht apart.
Waarden
Als de statistieken voor één set met maximaal 100 waarden worden getoond, zie je de waarden die je het vaakst goed hebt geraden, en de waarden die je het vaakst en het minst vaak als antwoord kiest – ook waarden die je nooit kiest, zodra je evenveel antwoorden hebt gegeven als de set waarden heeft.
Mensen neigen vaak naar sommige waarden en vermijden andere, en sommige waarden kunnen vaker goed geraden worden dan andere.
Resultaten kunnen veranderen
Je resultaten kunnen veranderen met je toestand en je omstandigheden. Niets van wat volgt is een vaststaand feit – het zijn mogelijkheden die de moeite waard zijn om in het oog te houden terwijl je speelt:
- Je toestand. Je scoort misschien anders net na het wakker worden of laat op de avond, uitgerust of moe, kalm of gestrest. Noteer je toestand terwijl je speelt, en de statistieken vergelijken je ronden per toestand en per dagdeel.
- Zelfvertrouwen. Je zeker van jezelf voelen, of juist vol twijfel zitten, zou kunnen samenhangen met hoe je scoort.
- Onder toeval telt ook. Merkbaar minder vaak goed raden dan toeval zou voorspellen, is ook een afwijking van toeval. Eén uitleg is dat intuïtie op dat moment tegen je werkt, en niet dat er niets gebeurt.
- Waarden. Misschien raad je sommige waarden veel vaker goed dan andere, en sommige misschien wel nooit, ook al kies je ze net zo vaak als de rest.
Wat de cijfers kunnen zeggen
De app kan je vertellen of je resultaten afwijken van puur toeval – nooit waarom, ook niet als de reden uit de gegevens voor de hand lijkt te liggen. Beschouw de cijfers als iets om te verkennen, niet als een vaste maatstaf voor jezelf. Zie ook Intuïtie.
Je toestand
De toestandsbalk
Met de balk in de hoofdweergave noteer je hoe je er nu aan toe bent: ‘Uitgerust’ of ‘Moe’, ‘Kalm’ of ‘Gestrest’, ‘Zelfverzekerd’ of ‘Twijfelend’, ‘Geconcentreerd’ of ‘Afgeleid’, je stemming en omstandigheden zoals ‘Net wakker’, ‘Na de koffie’ of ‘Na het sporten’. Wat je noteert, wordt vastgelegd bij elke ronde die je vanaf dan speelt, totdat je het wijzigt of het wordt vergeten.
De statistieken vergelijken je ronden dan per toestand en per dagdeel, en bij elke reeks staat de toestand die je had genoteerd. Zie Resultaten kunnen veranderen.
Wanneer je toestand wordt vergeten
Dat bepaal je met ‘Genoteerde toestand vergeten’ in Instellingen → Je toestand:
- ‘Bij start van de app’ – de standaardinstelling. Bij de volgende start van de app is er niets genoteerd.
- ‘Na een pauze’ – vergeten zodra je langer niet hebt gespeeld dan de ‘Pauze’ die je kiest, van 15 minuten tot 1 dag.
- ‘Nooit’ – blijft bewaard totdat je het wijzigt.
Je eigen toestanden
In Instellingen → Je toestand → Beheer toestanden kun je de naam en de volgorde van toestanden wijzigen, toestanden toevoegen en verbergen, eigen assen toevoegen en een as uitschakelen met de eigen schakelaar ‘Gebruik’ van die as: een uitgeschakelde as verdwijnt uit de toestandsbalk, nieuwe ronden leggen die as niet vast en de statistieken laten die as weg.
Wil je de balk helemaal weghalen, schakel dan ‘Noteer je toestand tijdens ronden’ uit; er wordt dan geen enkele toestand vastgelegd.
De balk is verborgen als vrij zicht aanstaat, en in de speelstijl ‘Eén voor één’ als het bijhouden van antwoorden is uitgeschakeld.
Weergave en functies
Thema’s
In Instellingen → Weergave en feedback staan vier thema’s – ‘Zand’, ‘Oceaan’, ‘Bos’ en ‘Schemering’ – elk met een lichte en een donkere versie. ‘Weergave’ biedt ‘Licht’, ‘Donker’ en ‘Systeem’; met ‘Systeem’ volgt de app de instelling van je apparaat en wisselt mee als die verandert. Het thema kleurt ook de speelkaarten en de meeste kant-en-klare afbeeldingen.
Feedback
Onder ‘Feedback bij treffer’ zorgen ‘Trillen’ en ‘Animatie’ bij een goed antwoord voor een trilling en een groene flits; je kunt ze elk apart uitschakelen. Ze werken in de speelstijl ‘Snelkeuze’ bij elke tik, in ‘Serie’ als elke trekking van een serie een treffer is, en in ‘Eén voor één’ als je je antwoord vóór de onthulling invoert. Bij een misser is er geen trilling of flits. Voor trillen moet ook ‘Voelbare systeemsignalen’ aanstaan in de iOS-app Instellingen, onder ‘Horen en voelen’.
‘Pulserende animatie bij tikken’ laat het vakje waarop je tikt in de speelstijlen ‘Snelkeuze’ en ‘Serie’ kort pulseren, en ook de waarde die je in ‘Eén voor één’ onthult als je de ronden zelf markeert of niet bijhoudt.
Een opgeruimde hoofdweergave
Bijna alles in de hoofdweergave kun je verbergen. Elke schakelaar staat in de weergave van Instellingen waar die bij hoort:
- Instellingen → Speelstijl en modus: twee schakelaars ‘Toon kiezer’, één voor de speelstijl en één voor de modus.
- Instellingen → Sets: ‘Toon kiezer’, ‘Toon knop om set toe te voegen’, ‘Toon knop voor setinstellingen’.
- Instellingen → Snelkeuze: ‘Toon knop voor rasteropties’.
- Instellingen → Eén voor één: ‘Toon hint’.
- Instellingen → Serie: ‘Toon serielengte in hoofdweergave’, ‘Toon serieduur in hoofdweergave’, ‘Toon knop voor rasteropties’ (dezelfde schakelaar als in Instellingen → Snelkeuze).
- Instellingen → Je toestand: ‘Noteer je toestand tijdens ronden’.
- Instellingen → Statistieken: ‘Toon knop voor statistieken’.
- Instellingen → Partnerspel: ‘Toon knop voor partnerspel’.
- De instellingen van elke speelstijl (‘Snelkeuze’, ‘Eén voor één’, ‘Serie’): ‘Toon rondeteller’, Toon schakelaar ‘Resultaten’, ‘Toon resultaat’.
Wil je één set uit de kiezer halen, zet dan de schakelaar ‘Gebruik’ uit in de instellingen van die set; de set verdwijnt dan ook uit het partnerspel en uit de statistieken. En als je vrij zicht aanzet, worden de meeste elementen van de hoofdweergave in één keer verborgen.
Functies
In Instellingen → Functies staat een schakelaar voor Speelstijl ‘Serie’ en één voor ‘Rondetellers en resultaten in de hoofdweergave’. Schakel je een functie uit, dan verdwijnt die uit de hoofdweergave en uit Instellingen.
Taal
In Instellingen → Taal stel je de taal van de app in, los van de taal van je apparaat; die instelling bepaalt ook hoe getallen en datums worden geschreven. Onder ‘Suggesties voor talen’ toont de lijst eerst de systeemtaal, daarna elke taal van je apparaat die de app aanbiedt, in de volgorde die op je apparaat is ingesteld; alle andere talen volgen onder ‘Andere talen’. Wordt de nieuwe taal in de andere richting gelezen, sluit de app dan na het overschakelen en open hem opnieuw (de schrijfrichting wordt pas na een herstart goed omgeschakeld).
Onder de rij ‘Taal’ in Instellingen staat de schakelaar ‘Toon hints in Instellingen’; die toont of verbergt de uitleg onder de instellingen.
Gratis uur en abonnement
Het gratis uur
De app is gratis te downloaden en bevat één uur tijd in de app om alles uit te proberen. Dat uur telt alleen terwijl de app open op het scherm staat, en het wordt over al je sessies samen opgeteld – er loopt geen klok terwijl de app gesloten is of op de achtergrond draait.
Is het uur op, dan gaat de abonnementsweergave vanzelf open. Had je niet genoeg tijd om over een abonnement te beslissen, dan kun je meer tijd nemen: ‘Stel het gratis uur opnieuw in’ geeft je opnieuw een uur, maximaal 3 keer – in totaal 4 uur gratis tijd.
Het abonnement
Wil je de app daarna blijven gebruiken, dan is er een abonnement met twee varianten: ‘Maandelijks’ en ‘Jaarlijks’. Het abonnement ondersteunt ‘Delen met gezin’.
Abonneren
Open Instellingen → Abonnement → Abonneer.
Beheren of opzeggen
Abonnementen worden door Apple gefactureerd. Instellingen → Abonnement → Beheer abonnement brengt je naar je abonnement. Je kunt het abonnement van de app ook op de gewone manier beheren, via de abonnementen van je Apple Account in de instellingen van je apparaat. Als je een abonnement opzegt, wordt het niet meer automatisch verlengd, maar je houdt toegang tot het einde van de lopende periode.
Heb je een maandabonnement, dan kun je met Instellingen → Abonnement → Stap over op jaarabonnement overstappen op het jaarabonnement.
Terugbetalingen
Terugbetalingen worden door Apple afgehandeld: vraag er een aan via reportaproblem.apple.com. We hebben geen toegang tot je betaalgegevens en kunnen zelf geen geld terugbetalen – maar schrijf ons toch ook als er iets is misgegaan, want alleen zo komen we het te weten.
Een aankoop herstellen
Open op een nieuw apparaat Instellingen → Abonnement → Abonneer en tik op ‘Herstel aankopen’. Zo krijg je ook een abonnement terug dat een gezinslid met je deelt. Gebruik de Apple Account waarmee het abonnement is afgesloten, of een Apple Account uit dezelfde gezinsgroep.
Je gegevens
In het kort
Er zijn geen accounts en geen servers. De app stuurt je gegevens niet naar ons of naar een ander bedrijf. Het partnerspel wisselt alleen gegevens uit met het andere apparaat – via een wifinetwerk dat beide apparaten delen, of van apparaat tot apparaat als ze dicht bij elkaar zijn.
Waar ze worden bewaard
Je instellingen, je sets – inclusief de afbeeldingen die je toevoegt – en je lijst met toestanden worden op je apparaat bewaard, in de eigen opslag van de app. Zolang je ‘Bewaar statistieken op dit apparaat’ niet inschakelt, worden statistieken alleen in het geheugen bewaard terwijl de app draait.
Net als de gegevens van elke andere app gaat dit allemaal mee in de back-ups van je apparaat.
De app bevat geen analysediensten en geen crashrapportage.
Als je ons schrijft
E-mail die je ons stuurt, is gewone correspondentie: we bewaren die alleen zo lang als nodig is om je te antwoorden.
Alle details staan in het privacybeleid.
Je eigen sets gemaakt met AI
Je kunt een AI-assistent, zoals een chatbot, vragen om afbeeldingen voor een set te tekenen of om een hele set te maken. De afbeeldingen zijn SVG-tekeningen. Een SVG-afbeelding kan de eigen teksten in meerdere talen bevatten, en de app toont die teksten dan in de taal waarop de app is ingesteld. Een afbeelding kan ook de kleuren van het thema van de app aannemen, zowel in de lichte als in de donkere versie van het thema. Een set kan een eigen ‘?’-plaatsaanduiding hebben: de afbeelding die wordt getoond zolang de waarde verborgen is. De assistent heeft de beschrijving van de formaten nodig; elk verzoek hieronder bevat het adres van die beschrijving.
Een set maken
- Kopieer een van de verzoeken hieronder naar de assistent en pas het naar wens aan: het onderwerp, het aantal afbeeldingen (van 2 tot 200), de talen.
- Kan de assistent geen webpagina’s openen, geef dan ook de beschrijving van de formaten mee: tik in het gedeelte Beschrijving van de formaten voor AI op ‘Kopieer’ en plak de beschrijving in hetzelfde gesprek, of tik op ‘Bewaar’ en voeg het bewaarde bestand als bijlage toe.
- De assistent antwoordt met de set in één codeblok, vaak met een paar woorden uitleg ervoor en erna. Kopieer alleen het codeblok: in veel chatapps heeft het een eigen kopieerknop.
- Tik in de app op in de hoofdweergave en tik in de weergave ‘Set toevoegen’ op ‘Plak van klembord’. Draait de assistent op een ander apparaat, zoals een Mac, bewaar het codeblok daar dan als bestand met een naam die eindigt op .json en tik in plaats daarvan op ‘Importeer uit bestand’. De nieuwe set wordt toegevoegd en gekozen; tik op ‘Begin met raden’ om naar de hoofdweergave te gaan. Dezelfde knoppen staan ook direct onder deze stappen.
Als er een fout optreedt, vraag de assistent dan om die te verhelpen.
Een set zonder bijschriften:
Maak voor de app Intuition Check een set met de naam ‘Dieren’: 10 SVG-afbeeldingen van verschillende dieren, zonder bijschriften. Lees eerst de beschrijving van de formaten en volg die: https://intuition-check.com/llm-formats.txtEen set met een bijschrift in elke afbeelding. Het bijschrift verandert niet mee met de taal van de app:
Maak voor de app Intuition Check een set met de naam ‘Fruit’: 8 SVG-afbeeldingen van verschillende soorten fruit, elk met een bijschrift onder de tekening: de naam van het fruit. Lees eerst de beschrijving van de formaten en volg die: https://intuition-check.com/llm-formats.txtEen set met namen in meerdere talen. Elk bijschrift toont de naam van de afbeelding in de taal van de app:
Maak voor de app Intuition Check een meertalige set met de naam ‘Planeten’: 8 SVG-afbeeldingen van de planeten, elk met een bijschrift dat de naam van de afbeelding toont in de taal van de app. Geef de namen in het Nederlands, Duits en Hindi. Lees eerst de beschrijving van de formaten en volg die: https://intuition-check.com/llm-formats.txtEen set waarvan de afbeeldingen de kleuren van het thema van de app aannemen:
Maak voor de app Intuition Check een set met de naam ‘Weer’: 8 SVG-afbeeldingen – zon, wolk, regen, sneeuw, onweer, wind, mist en regenboog – zonder bijschriften. De kleuren moeten het thema van de app volgen, in de lichte en in de donkere versie. Lees eerst de beschrijving van de formaten en volg die: https://intuition-check.com/llm-formats.txtEén afbeelding maken
De assistent kan ook één afbeelding maken. Kopieer het codeblok, open een van je eigen afbeeldingssets, tik op en tik op ‘Plak van klembord’. De afbeelding wordt zonder naam toegevoegd: tik erop en typ een naam bij ‘Naam’. Je kunt het codeblok ook bewaren als bestand met een naam die eindigt op .svg, daarna in de set op tikken en ‘Bestanden’ kiezen; de bestandsnaam zonder .svg wordt de naam van de afbeelding.
Teken één SVG-afbeelding van een kat voor de app Intuition Check. Lees eerst de beschrijving van de formaten en volg die: https://intuition-check.com/llm-formats.txtWat een set nog meer kan bevatten
Vraag de assistent uit te leggen wat de formaten mogelijk maken, met een voorbeeldverzoek bij elke mogelijkheid:
Lees de beschrijving van de formaten voor de app Intuition Check: https://intuition-check.com/llm-formats.txt Vertel me kort en in eenvoudige woorden wat er mogelijk is in sets en afbeeldingen: hoe afbeeldingen het thema van de app kunnen volgen – de verschillende thema’s, de lichte en de donkere versie; hoe de namen van een set en van de afbeeldingen vertalingen in andere talen kunnen krijgen; welke soorten bijschriften een afbeelding kan hebben; wat de ‘?’-plaatsaanduiding van de set (de achterkant ervan) kan tonen. Geef bij elke mogelijkheid een voorbeeldverzoek dat ik je kan sturen. Teken nog niets.Beschrijving van de formaten voor AI
De beschrijving van de formaten is in het Engels geschreven, voor een AI-assistent, niet om door mensen te worden gelezen. Dezelfde beschrijving staat op de website, op het adres in de verzoeken hierboven.
This is a specification for language models; it is not formatted for human reading.
Format version: 1
Stable URL: https://intuition-check.com/llm-formats.txt
# Intuition Check: how to make SVG pictures and guess sets
Intuition Check is an iOS app. The app picks one picture of a guess set, hidden, and the user guesses which one.
A guess set is a named, ordered list of pictures. This text tells you how to produce (A) a whole guess set as
one JSON object, or (B) one picture as one SVG document, so that the app accepts it and draws it well.
The user's wishes always win. Every rule, default and style advice in this text is what you do when the user
has not said otherwise: anything the user asks for — any texts, any number of them, any place, size, shape,
colour or layout, a caption over the drawing, a word along an arc — overrides it. Only facts about the app
cannot be overridden, because the app enforces them (what it accepts and refuses, what it removes, how it
draws: sections 2, 3, 5 and the theme rules of 6 — but a sentence there that tells you what to do is still a
default, not a fact about the app); if a wish runs into one of them, do the closest thing the app allows and
say so.
## When the user asks what the formats allow (to explain, not to make)
Answer in the user's language, in plain words, without code. Keep apart what the app does and what you do by
default. The sizes, positions and orders in this text, and its sentences that tell you what to do ("put",
"give", "write", "keep"), are your defaults for a good result: the app does not check them and the user may
ask otherwise. Do not retell them as rules of the app ("must", "required", "not allowed"); say "by default I …".
What the app itself does:
- Themes: four themes, each light and dark. The app never recolours a picture on its own; a picture follows
the theme only where its own file says so (section 6), which you write when asked.
- Names: a set needs a name; a picture's name is optional. The set and every picture may have translations,
each its own languages; the app shows the one for the app language, else the default name.
- Captions: text in a picture is part of the drawing; the app never writes or translates it. A caption is one
fixed text, or holds versions in any number of languages, two included, and the app language picks one.
- The "?" placeholder: a set without a cover shows the app's own "?". The app draws no cover itself. A cover
is a picture like any other: it may show anything, with or without text, follow the theme and the app
language, and stand anywhere in the set.
- Limits: at least 2 pictures to guess (a cover is not one of them), at most 200 in all, 10 MB per SVG; one
refused picture refuses the whole set.
Do not translate the themes' code words (section 6).
Terms used below:
- name: the picture's name as stored in the app (`name`, `nameTranslations`). It is data, not part of the drawing.
- caption: a text drawn inside the picture (an SVG `<text>`). Optional. See section 4.
- app language: the language the app's interface is set to, in the app itself; it may differ from the device's
language. One of the codes in section 3.
- user's language: the language the user writes to you in, unless the user names another.
## 1. Output contract
A. The user asks for a SET (several pictures, "guess set", "set"):
- Answer with ONE JSON object as defined in section 2, in ONE code block. Nothing else is needed.
- If you add words outside the code block, they must not contain `{` or `}`: the app reads the pasted text
from the first `{` to the last `}`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block (chat apps usually show a copy button on it) and paste it into Intuition Check as a new set — or,
on another device, to save it as a file whose name ends in .json and open that file in the app.
B. The user asks for a single PICTURE:
- Answer with ONE SVG document (section 5) in ONE code block.
- If you add words outside the code block, they must not contain `<svg` or `</svg>`: the app reads the
pasted text from the first `<svg` to the last `</svg>`.
- Before or after the code block, tell the user in one short sentence, in the user's language, to copy the
code block and paste it into one of their picture sets in Intuition Check; the picture is added without a
name. Or to save it as a file whose name ends in .svg and add that file to a set: the file name without
".svg" becomes the picture's name, so suggest a file name that is the name, e.g. `Cat.svg`.
In both: do not name the app's buttons or screens from memory, and do not translate their names yourself. The
app's help exists in every language of the app, with the exact names the app shows in that language; the steps
are in its section "#ai_sets", and the page for each language is listed in https://intuition-check.com/llms.txt. If
you can open web pages and the user wants the steps, take the names from the page in the user's language.
Otherwise the one sentence above is enough: the app's help and its own screens show the user where to paste.
Ask first, or proceed:
- Proceed without questions. Decide what the request leaves open, and say what you decided in a sentence or
two beside the code block:
- which things of a kind ("five animals": choose the animals);
- how many pictures, if no number is given: 4;
- the regional form of the user's language: take the likeliest and name it (e.g. "Canadian French");
- translations: as well as you can; name the languages you are least sure of;
- themes not mentioned: fixed colours, and one sentence that a version following the app's themes can be
made;
- a cover with nothing said about what it shows: the question mark (8c).
- Ask only when you cannot start: you cannot tell which language the names should be in, or the request names
no subject at all. Then at most 2 questions, in ONE message, in the user's language, each with the choice
you will make if the user does not mind; no code block in that message. Never ask what the message already
says. Plain words: no "code block", "JSON", "opaque", "plate", "import", nothing about how the format works.
- If you cannot ask (there is no dialogue), or the user tells you not to: proceed.
- What you say beside the code block is in the user's words: "its own background", not "opaque plate";
language names, not codes; at most four short points. The file endings .json and .svg are allowed: the
user needs them.
- Like all words outside the code block: no `{` or `}` next to a set, no `<svg` next to a picture. Do not
quote code outside the code block.
Defaults when the request does not say otherwise:
- No caption text in the drawing (section 4, option 1).
- No theme colours (section 6). Fixed colours of your own.
- Names: always give every picture a `name`, in the user's language. Give no `nameTranslations` unless the
user asks for other languages or for captions in several languages (section 4, option 4).
- Number of pictures: what the user asked for; never fewer than 2 or more than 200.
- No cover (section 2). A cover the user asks for is extra: it is not one of the pictures asked for.
## 2. The set format (JSON)
```json
{
"intuitionCheckSet": 1,
"name": "Animals",
"nameTranslations": { "ru": "Животные", "de": "Tiere" },
"images": [
{ "name": "Cat", "nameTranslations": { "ru": "Кот", "de": "Katze" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><circle cx=\"50\" cy=\"56\" r=\"30\" fill=\"#f57c00\"/><path d=\"M24 44 L28 14 L48 30 Z M76 44 L72 14 L52 30 Z\" fill=\"#f57c00\"/></svg>" },
{ "name": "Fish", "nameTranslations": { "ru": "Рыба", "de": "Fisch" }, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><ellipse cx=\"44\" cy=\"50\" rx=\"30\" ry=\"18\" fill=\"#1976d2\"/><path d=\"M70 50 L92 32 L92 68 Z\" fill=\"#1976d2\"/></svg>" }
]
}
```
(The drawings above are kept tiny to show the shape of the file. More examples are in section 8.)
Keys:
- `intuitionCheckSet` (required): the integer 1.
- `name` (required): the set's default name. Not empty.
- `nameTranslations` (optional, on the set and on each image): object, language code → name. Codes: section 3.
- `images` (required): array of at most 200 objects, at least 2 of them pictures to guess (a cover is one
more, not one of the 2).
Array order = display order. Each object:
- `name` (optional in the format; always give it): the picture's default name.
- `nameTranslations` (optional): as above.
- `svg` (required): one complete SVG document as a JSON string (section 5).
- `cover` (optional): the JSON literal `true` on the picture that is the set's cover (below). Leave it out
on every other picture.
- Unknown keys are ignored. Do not add any.
The cover: while the app hides the value to guess, it shows a "?" in its place. A set — any set, with or
without captions — may bring its own picture for that place: the cover. Give one ONLY when the user asks for
it (a cover, a back, a placeholder, a question-mark picture). It shows what the user wants: for a set of
playing cards, for example, the pattern of a card's back. If the user does not say what it shows, draw the set's
own frame, with a question mark where the other pictures have their subject (8c; the last picture of 8f);
when the pictures' plates differ in colour, a plate of the same family (8f: a neutral grey). Exactly one
picture gets `"cover": true` (if several do, the first counts and the others are ordinary pictures). The
cover is never an answer, so the set still needs at least 2 other pictures. Put it last in `images` (your default; the app takes it at any place). Give it
a `name` in words ("Question mark", not "?") and, in a multilingual set, `nameTranslations` in the same
languages as the pictures: the app shows the cover's name in the set's list of pictures, in the app language.
By default the cover has no caption (no word under it); the app draws any text it has. Its question mark is the cover's subject; it only borrows the
`class="caption"` pattern of section 4, option 4, so that it changes with the app language. Write the mark
as text (preferred) in two forms: `?`, and `؟` for Arabic and Urdu (the form those languages write). The app
does not change the mark itself: the cover holds both, and its own style sheet shows the one for the app
language. That works in every set, also in one without captions; the two marks are then its only `<text>`. Drawn as a
shape instead, the mark is the same in every app language: Arabic and Urdu see the Latin form. A cover with
a subject of its own (a card back, a cloud) needs no `<text>` and no style sheet.
A single picture (answer B) has no cover key: the user marks a picture as the cover inside the app. A single
picture meant as a cover and asked with a caption: do both, and say that the word will show on the cover.
Rules:
- Strict JSON, UTF-8: no comments, no trailing commas. Non-ASCII characters may be written as they are.
- Inside the `svg` string escape `"` as `\"` and `\` as `\\`; write the SVG on one line, or write each line
break as `\n`. No raw line break or tab inside a JSON string. Where you join two lines, put one space,
never nothing. No other escape is needed: an apostrophe stays `'` (`\'` is not JSON), and letters of any
script stay as they are.
- Types: `intuitionCheckSet` is the number 1, every name and translation is a string, `cover` is `true`. A
wrong type (`"cover": "true"`, a number as a name, `null` as a translation) makes the app refuse the whole
text.
- If the app refuses any one picture, it imports nothing and names the refused pictures. Every picture must
be valid.
- A name is one line of plain text. The app trims it, turns line breaks and tabs into spaces, and cuts it at
256 characters. Keep names short (one to three words): they are shown small.
How names are shown:
- A set is multilingual when the set or any image has at least one translation.
- In a multilingual set the app shows, for the app language: the translation with exactly that code; else
the translation with the code's first part (`fr-CA` → `fr`, `en-GB` → `en`, `es-419` → `es`); else the
default `name`.
- In a set without translations the app shows the default `name` in every app language.
When the user asks for a multilingual set:
- Default `name` (set and images): in the user's language.
- `nameTranslations`: one entry per requested language, on the set AND on every image. Give the same
languages on every image (the app does not require it: an image without an entry shows its default name).
- The language of the default `name` gets no entry of its own: a language without an entry shows the default
name.
- A regional code (`en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA`) needs its own entry only when its word
differs from the `en` / `es` / `fr` entry. `pt-BR` and `pt-PT` have no common code: each requested one that
is not the language of the default `name` needs its own entry (asked for "Portuguese" with an English default
name: give both). The same for `zh-Hans` and `zh-Hant`.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`, `fr`,
`es`), in names as in captions: every form of that language then shows it.
- Languages not named ("a multilingual set"), or "all languages": every language of section 3 — 53 codes,
47 entries (see there). Translate as well as you can (section 1). Leave out only a language you cannot
write at all (it then shows the default name), and tell the user which.
- `nameTranslations` change only names, never a caption. A multilingual set has no captions unless the user asks for them; a
caption drawn inside the pictures needs its own words for each language in the SVG itself (section 4,
option 4).
## 3. Language codes
Write the codes exactly as here (case matters):
ar bg bn ca cs da de el en en-AU en-CA en-GB es es-419 fi fr fr-CA gu he hi hr hu id it ja kk kn ko lt ml mr ms
nb nl or pa pl pt-BR pt-PT ro ru sk sl sv ta te th tr uk ur vi zh-Hans zh-Hant
A code that is not in this list is not an error: the app drops it. An entry
with an empty value is dropped.
"All languages" is 53 codes but 47 entries besides the default, in names and in captions: the user's language
is the default and needs none, and `en-AU`, `en-CA`, `en-GB`, `es-419`, `fr-CA` show the `en` / `es` / `fr`
word unless theirs differs. (With a Bengali default, `en` is one of the 47 and `bn` is not.)
## 4. Captions (text inside the drawing): four options
Names (section 2) are separate from captions: the app never writes a name into a picture and never changes any
text of a picture. Give names always. Text in, on or under the picture — whatever the user calls it (name,
word, label) — is a caption request; a wish about the words alone (correct, careful) is not. If you leave out
something that was asked for, say so. Lettering that is part of the subject (STOP on a road sign) is
drawing, not a caption: allowed under every option, written once, with `lang`.
Urdu is drawn in Nastaliq, its own style, which reaches lower under the line than other scripts (about
0.3 × font-size): leave room under an Urdu caption. A `؟` in Urdu is smaller in Nastaliq: give it its own text and size (8c).
A caption's `lang` may be a regional code (`en-GB`, `fr-CA`), also where its name stands under the parent code.
Choose the caption option from the request:
1. DEFAULT — no caption. The drawing has no `<text>` that spells the name. Also for a multilingual set
whose user did not ask for captions.
2. ONE-LANGUAGE caption — when the user asks for a caption / label / word in or under the picture and names
no languages for it. A plain `<text>` with the word in the user's language; every app language shows
that same word. Put `lang="CODE"` of the caption's language on the `<text>`: a picture
with text is drawn anew for each app language, and without `lang` the letter forms follow the app language. No
`letter-spacing` in Arabic, Hebrew, Thai or an Indic script. Example:
`<text lang="ru" x="50" y="91" font-size="12" font-family="sans-serif" text-anchor="middle" fill="#222222">Кот</text>`
3. TWO LANGUAGES AT ONCE — when the user names exactly two languages for the word under the picture and does
not say it should change with the app's language. The same for any other text of the picture: each gets its
two lines. Two `<text>` lines, each with its `lang`, both always
shown, no style sheet for them: the user's language on top, font-size 10, baselines at y = 84 and 95,
subject in the upper 68 units (100-unit viewBox). A line in a script of 8b's "Lettering" block takes that
`font-family` as an attribute; a long word follows "Size" below. Names: the user's language as `name`,
the other in `nameTranslations`. Say that both words always show, and that captions that change with the
app's language can be made instead.
4. CAPTIONS IN SEVERAL LANGUAGES — when the user names three or more languages for the captions, or asks for
captions in all of the app's languages, or for captions that follow the app's language (= all of them).
The picture holds one caption per language and a small style sheet; through that style sheet the app
language picks the caption (8b, 8f). Languages: exactly those the user named; "all" = every language of
section 3 (53 codes, 47 entries: see there), translated as well as you can (section 1). In a set, give
every image `nameTranslations` with the same languages and the same words, so that the name and the
caption agree.
How option 4 works:
- A picture that contains `<text` or `:lang(` is drawn anew for each app language it is shown in, each time
inside an HTML page whose language is that app language: `<html lang="CODE">`, CODE from section 3 (`ru`,
`pt-BR`, `zh-Hant`, …). The app changes nothing in the file; the file's own CSS picks the caption with the
selector `:lang()`.
- `:lang(x)` matches a page in `x` and in every `x-…`: `:lang(fr)` also matches `fr-CA`, `:lang(es)` also
`es-419`, `:lang(en)` also `en-GB`. `pt-BR` and `pt-PT`, `zh-Hans` and `zh-Hant` are written separately.
- The pattern:
- All language versions of one text in ONE group with `class="caption"`; each `<text>` in it is one
language version, all at the same place.
- Any number of texts, anywhere and in any form (labels on parts, a title, words along an arc with
`<textPath href="#id">`): give each text its own group with `class="caption"` holding its language
versions; the one style sheet serves them all.
- The default caption has the class `default`. It carries the word of the default `name`, in the user's
language. It is shown when the page has no language and in every language that has no caption of its
own. The user's language is one of those: its code stands in no rule and on no caption. (In 8b and 8f
the default word is English, so `en` appears nowhere. The Zodiac files call this class `en`.) The
default caption is also shown on pages of other languages: give it `lang="CODE"` of the user's language.
If that language has a line in the "Lettering" block of 8b, add `.default` to that line's selector
(`.default, .hi, .mr { font-family: … }`; `.default` alone when no caption has that class), and to the
`letter-spacing: 0` line if you use letter-spacing.
- Every other caption's `class` lists the codes of the languages that show it. Languages with the same
word may share one caption: `class="bg ru"`; that changes only the `class`, never the style sheet. These
captions need no `lang`: each shows only on a page of its own language.
- The style sheet, in this order:
`.caption text { display: none }` — hide every caption;
`.caption .default { display: inline }` — show the default one;
`:lang(ar, bg, …) .default { display: none }` — hide the default one in every language that has its own
caption (list them all);
`:lang(ar) .ar, :lang(bg) .bg, … { display: inline }` — show each language's own caption.
- A regional code whose word differs from its parent's (`es-419` next to `es`): its own caption, its code in
both rules like any other, and one more rule: `:lang(es-419) .caption .es { display: none }` (the extra
`.caption` makes it win wherever it stands in the sheet). If its word is the parent's, give it nothing.
- A regional form named alone ("British English", "Canadian French") goes under the parent code (`en`,
`fr`, `es`), so every form of that language shows it. "Portuguese" alone: one caption
`class="pt-BR pt-PT"` when the word is the same.
- Do not repeat the default word under the user's own code (no caption, no rule, no `nameTranslations`
entry for it).
- Check: the codes in the hiding rule = the codes in the showing rule = the codes on the captions, and
each code is on exactly one `<text>`; the user's own code is in none of the three. Otherwise a language
shows no caption, or two at once.
- To leave a language out: no `<text>` for it and its code in neither rule. It then shows the default
caption.
- In a set: the same style sheet, the same attributes on the caption group and the same languages in every
picture, character for character. Only the words differ, and the size of a long word. (A cover has its
own text and rules: 8c, 8f.)
- Size: the app does not measure or shrink text. Choose one `font-size` on the group at which the captions
fit the free width. A word too long for it: first its own smaller `font-size` attribute, down to 9 (on a
100-unit viewBox); if it still does not fit, a shorter everyday word (and the same word as its name).
Never under 9. To estimate a width (measured in WebKit on a Mac):
- ordinary case in bold `sans-serif` (8f): 0.45 to 0.6 × font-size per letter. Треугольник is 77 of 100
units wide at font-size 12, and 68 at 10.5;
- a Chinese character: about 1 × font-size;
- Indic scripts, Thai, Arabic, Hebrew in bold `sans-serif`: 0.3 to 0.55 × font-size per code point (13
words measured).
- Case: ordinary case, as in 8f; capitals with wide spacing only for the style of 8b. Capitals follow each
language's rules: Turkish i → İ; Greek capitals lose the accent (ΑΣΤΈΡΙ → ΑΣΤΕΡΙ); German ß → SS.
- Fonts: copy the "Lettering" block of 8b (in a set, only the lines of the scripts you use). It gives every
script outside Latin, Cyrillic and Greek its own font list (fonts present on Apple devices, at a weight
they really have), and sets `letter-spacing` to 0 for Arabic, Hebrew, Thai and the Indic scripts — in most
of them the letters join or stack, and spacing breaks that (a line needed only when the group has
letter-spacing). Japanese, Chinese and Korean each get their
own font so that a Han character takes its regional form; that is why `zh-Hans` and `zh-Hant` keep
separate captions even with the same word.
- Direction: the page is left-to-right in every app language. Keep `text-anchor="middle"` for every script.
An Arabic, Hebrew or Urdu caption mixed with digits or Latin letters has not been tested: avoid it.
- A caption drawn twice (e.g. a shadow under it): put the group once inside `<defs>` with an `id`, and draw it
with two `<use href="#id">` that carry the colours and the offset.
- Whole set: captions and names in all languages fit in one answer. Write every language that was asked for, in
every picture. Do not ask about it, and do not tell the user it may not fit. In a set, leave out comments
and indentation.
- Never: fewer languages than asked without saying which are missing; captions left out when they were asked
for; one set spread over several messages or delivered as single pictures; a set cut short. A set is
always ONE JSON object in ONE message.
Start from 8f (a small set with captions and a cover, 100-unit viewBox). Take from 8b (a picture with a
caption in every language) its "Lettering" block, and its gold medallion style only when the user asks for
it; 8c is that set's cover. All three are complete and tested in the app. 8b and 8c are built like the app's
own Zodiac set; one of its files, if you can open web pages (you do not need it):
https://intuition-check.com/sets/zodiac/zodiac-08-scorpio.svg
## 5. The SVG document: what the app does with it
Facts (from the app's code):
- Size limit: 10,000,000 bytes per SVG (UTF-8). A larger SVG is refused.
- The app recognises an SVG by the characters `<svg` within the first 4096 bytes. Begin the document with
`<svg`: no XML declaration, DOCTYPE or comment before it.
- The app draws the SVG into a still bitmap, at most 1600 pixels on the longer side, with WebKit, inside an
HTML page. A picture with text is drawn anew for each app language it is shown in, and one with theme
rules for each theme. The background is transparent: where the drawing paints nothing, the app's own
background shows, light or dark depending on the user's theme.
- Scaling: the root's `viewBox` is fitted into the bitmap, aspect ratio kept, centred. `width` and `height`
on the root are ignored. A picture without a `viewBox` is accepted, but drawn unscaled (cut off or tiny):
always write one.
- The aspect ratio is read from the first `viewBox="minx miny width height"` in the first 4096 bytes: double
quotes, four numbers separated by spaces or commas, positive finite width and height. If it cannot
be read, the bitmap is square. Ratios outside 1:20 … 20:1 are clamped.
- `preserveAspectRatio="none"` on the root is replaced with `xMidYMid meet`: a picture is never stretched.
- Scripts never run. Nothing is loaded from the network: only content inside the file is drawn.
- Rendering has a time limit (10 seconds to load, 10 seconds to draw). A picture that exceeds it is refused.
Removed before drawing (so never write them; the rest of the picture is still drawn):
- these elements with everything inside: `script`, `foreignObject`, `meta`, `link`, `base`, `iframe`, `frame`,
`frameset`, `object`, `embed`, `applet`, `portal`, `form`, `input`, `button`, `textarea`, `select`, `option`,
`audio`, `video`, `source`, `track`, `template`, `noscript`;
- every attribute whose name starts with `on` (`onload`, `onclick`, …);
- every `href` / `xlink:href` whose value does not start with `#` (a part of the same file) or `data:image/`;
- `@import` in a style sheet; `<?xml-stylesheet …?>`; a DOCTYPE with an internal subset (`[ … ]`).
The removal works on the text of the file: the character sequences `on…=`, `href=` and `@import` are also
removed from text content and CSS, so do not write them there.
Allowed and drawn: shapes, `path`, `g`, `text`, `tspan`, gradients (`linearGradient`, `radialGradient`),
`pattern`, `mask`, `clipPath`, `filter`, `defs`, `symbol`, `use` with `href="#id"`, `<style>` with inline CSS,
`title`, `desc`, `image` with `href="data:image/…"` (a picture embedded in the file).
Not removed, but useless: `a` (a link does nothing in a picture in the app).
Rules for the SVG you write:
1. Root: `<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">` … `</svg>`. Double-quoted
attributes. Lower-case `<svg`. One root; no nested `<svg>` elements.
2. Square `viewBox` (`0 0 100 100`) unless the user asks for another shape. The same `viewBox` for every
picture of a set.
3. Self-contained: no external images, fonts, style sheets or links. For text use
`font-family="sans-serif"` (or `serif`, `monospace`), or the font lists of 8b, which end with one of them:
the text is drawn with the device's own fonts.
4. Well-formed XML: every element closed, attribute values quoted, `&` `<` `>` in text and attribute values
written as `&` `<` `>`. Only SVG elements; no HTML elements.
5. Readable small: the app shows pictures in a grid, each cell may be small. One clear subject that fills
most of the viewBox; a few large shapes; strong contrast; no fine detail. On a 100-unit viewBox: the
subject's lines at least 2 wide, a caption's font-size at least 10, a long word 9. Ornament may be
thinner (the rings of 8b); in a small cell it may not be seen. The examples in this text are bare on
purpose; do not copy their simplicity. Build the subject from about 4 to 10 shapes: its outline, its
parts, and one or two details that make it this thing and no other. Someone who sees only the picture
must be able to name it.
Pale or pastel colours: keep the silhouette. The subject's main shape, or an outline around it, must differ
from the plate by at least 3:1 — a darker outline, or a deeper plate. That is for the silhouette only:
details inside the subject are free.
6. Distinct: the game needs the pictures told apart at a glance. Every picture of a set must differ clearly
from every other in silhouette or in main colour — not only in a detail. No two pictures with the same
SVG text.
7. One style across a set: the same viewBox, margins, line weights, palette family, and the same kind of
background (all with a plate, or all without). With captions: the same lettering and caption place in
every picture.
8. Background: the bitmap is transparent and the app's background can be light or dark. Either draw an
opaque plate of your own behind the subject (e.g. `<rect width="100" height="100" rx="12" fill="…"/>`), or
use only colours that stay visible on both white and near-black, or use theme colours (section 6).
9. Unique `id` values inside one SVG. Ids of different pictures do not clash (each picture is drawn alone).
Do not start an id with `ic-` unless it is a theme rule, and do not name a class of your own `ic-…` or a
variable `--ic-…` (section 6).
10. Keep it light: no heavy filters (large blurs), no deep `use` nesting, no animation (the app does not remove it, but
draws the picture as a still image).
11. A caption must not cross the drawing, unless the user allowed it (labels on the drawing's parts, a word on
a sign or over the subject are such wishes). Any text stays inside its own shape when it has one (a sign,
a label, a slice), and inside the picture. Keep the subject and the caption
apart — e.g. on a 100-unit viewBox: the subject above y = 78 and one caption line with its baseline at
y = 91; with two lines (section 4, option 3), the subject above y = 68.
## 6. Theme colours
Use this section ONLY when the user asks for pictures that follow the app's theme, or for light and dark
versions. Otherwise use fixed colours, no id that starts with `ic-`, no class `ic-…` and no variable
`--ic-…`. When the user said nothing about
themes: fixed colours, and offer a version that follows the themes (section 1). "Looks good in light and dark
mode" is not a theme request: an opaque plate with fixed colours does it (section 5, rule 8). A theme request
wins over a colour description in the same message ("gold on dark, matching the app's themes": theme rules).
The app has four themes — `sand`, `ocean`, `forest`, `dusk` — each in a `light` and a `dark` version. These words
(and `light`, `dark`) are code words for the rules below, not what the user sees: the app shows the four themes
under its own names in the user's language. When you talk to the user, do not translate the code words
yourself; say "the app's four themes" (and "light" / "dark" in the user's language), or, if you can open the
app's help page in the user's language (see section 1), take the themes' names from it.
Every version has its own values for five colours:
- `background` — the colour behind every view;
- `surface` — plates and panels on a view;
- `text` — the app's text colour;
- `accent` — the colour of buttons that are not filled;
- `soft` — in a light version the same as `accent` (a `soft` part on an `accent` part cannot be seen there);
in a dark version a pale tone close to the text colour.
The values (#rrggbb), in the order background, surface, text, accent, soft:
- sand light: f6f2ea eae3d5 403a35 645339 645339
- sand dark: 1b1a18 282622 c7c4bd b89b70 d2cbbe
- ocean light: eef4f7 dde8ee 363d40 3e5a6a 3e5a6a
- ocean dark: 0d1a23 16272f bec4c7 82a3b6 c6d4db
- forest light: f1f4ec e1e8d7 353e34 4a5e46 4a5e46
- forest dark: 111a14 1b261e bec4bd 8ba586 c9d4c6
- dusk light: f6f1f6 eae0ec 3f3944 5e4a6a 5e4a6a
- dusk dark: 17121c 231b2a c2bdc5 a894b4 d3c9d9
All four themes are muted: no colour above is bright. `text`, `accent` and `soft` on `background` or `surface`
have a contrast of at least 5.6:1 in every version.
Fixed colours and theme colours mix freely: give rules only to the parts that should follow the theme (a plate,
outlines, the main shape) and keep your own fixed colours where the picture needs them (the arcs of a rainbow,
a red apple). A part without a rule is drawn as written in every theme.
A part that keeps a fixed colour sits on a plate that changes: check it against the light and the dark
background and surface values of the table. Near-black vanishes on the dark ones (#1b1b1b: 1.01:1), white and
yellow on the light ones (#ffffff: 1.11:1, #f9a825: 1.54:1). Give such parts the theme's text colour — in a
style sheet `fill: var(--ic-text, #333333)` (or `stroke:`), with ids `ic-text` or `ic-stroke-text` — or
use a mid-tone (#e53935: 3.30:1 on the light ones, 3.57:1 on the dark ones).
Captions on a themed plate take the theme's text colour. In a style sheet: one more line,
`.caption { fill: var(--ic-text, #222222) }`, in the sheet that already picks the caption; a single `<text>`
gets a class and the same line; a caption drawn twice through `<use>` gets the class on the `<use>` that
carries its colour (8b). With ids: give the caption group `id="ic-text"` and a written `fill`; the group may
also carry `class="caption"`; a single `<text>` may carry the id itself. A themed cover's mark is coloured
the same way.
There are two ways to write theme colours, and the app reads both. Use a style sheet (6.1), also when the
user will edit the file in Inkscape (6.4). Use ids (6.2) instead when the user says the file will be edited
in Figma, Illustrator, Affinity or Sketch, or asks for ids: those editors write the file anew and drop its
`<style>` element, while ids can come through as layer names (Figma only with its option to include ids).
One way per picture, and in a set the same way in every picture: the app accepts both in one file, but a
rule in a group's id overrides the sheet colours of the classed shapes inside that group.
### 6.1 A style sheet
The app adds to the root `<svg>` the classes `ic-sand` | `ic-ocean` | `ic-forest` | `ic-dusk` and `ic-light` |
`ic-dark`, and defines the CSS variables `--ic-background`, `--ic-surface`, `--ic-text`, `--ic-accent`,
`--ic-soft` — but only if the file contains, in its `<style>` element, one of those six class names after a
dot (e.g. `.ic-dark`), or, in `<style>` or in a `style` attribute, a variable name that starts with `--ic-`.
```
.plate { fill: var(--ic-surface, #dddddd) }
.leaf { fill: var(--ic-accent, #e53935) }
.ic-dark .dot { fill: #ffd54f }
.ic-forest.ic-dark .dot { fill: #69f0ae }
```
The second value inside `var()` is the colour other viewers show. Give the styled elements a `class` and no
`fill` in a `style` attribute. The second value is needed: always write it.
- The five variable names are the only ones. Another name (`--ic-bg`) is never defined: its second value is
drawn in every theme.
- Write `var(--ic-…)` inside the `<style>` element, not in a `fill="…"` or `stroke="…"` attribute: the app
does not look there, and with no other mention it defines no variables.
- The app writes the six classes on the root. Never write one of them on an element yourself.
- A sheet rule beats a colour written in a `fill` / `stroke` attribute; a colour in a `style` attribute beats
the sheet.
- Of two sheet rules of equal weight the later one wins: plain rules first, then `.ic-light` / `.ic-dark`
rules, then theme rules.
- Put these lines into the same `<style>` as the caption rules of section 4, when the picture has them.
### 6.2 Rules in an id
A rule = optional limits + a colour.
- Limits, at most one of each kind, any order: a theme (`sand` | `ocean` | `forest` | `dusk`); a version
(`light` | `dark`); a paint (`fill` | `stroke`). No limits = every theme, both versions, fill and stroke.
- Colour: one of the five names above, or your own colour as exactly six hex digits (`1e88e5`). Colour words
(`red`) are not colours in a rule. All rule words are English.
`id="ic-` + one or more rules, all words joined by hyphens, own colours without `#`:
- `ic-text` — the text colour everywhere;
- `ic-light-accent-dark-soft` — accent in light versions, soft in dark versions;
- `ic-dark-1e3a2a` — own colour in dark versions; as drawn in light versions;
- `ic-ocean-dark-c3ced4` — own colour in the dark version of Ocean only;
- `ic-stroke-accent` — accent on the outline only.
- `ic-fill-accent-stroke-text` — two rules in one id: accent inside, text colour on the outline.
Reading stops at the first character that is not an ASCII letter, digit or hyphen, and at the first word that
is not a rule word. So keep ids unique with a numeric suffix: `ic-text-2`, `ic-text-3`. A word of your own
ends the rules: `ic-moon-text` holds no rule. A six-letter word of hex digits (`facade`) is read as a colour.
What a rule does:
- The id may be on a shape, a `text`, or a group `g`. A rule on a group covers everything inside it, except
what is inside `defs`, a gradient, `mask`, `pattern`, `clipPath`, `marker`, `symbol` or `filter`.
- For each element, fill and stroke are chosen separately. Its own rule is used when one applies in the
current theme and version; otherwise the rule of the innermost enclosing group that has one that applies;
otherwise the colour stays as drawn.
- Among several rules of one element that apply: theme + version beats theme, theme beats version, version
beats no limit; then a rule with `fill` / `stroke` beats one without; then the first one written.
- The chosen colour replaces a plain colour written in the element's `fill` / `stroke` attribute or in its
`style` attribute. Left as written: `none`, `transparent`, `currentColor`, `inherit`, `url(…)` (gradients),
`var(…)`, and colours with their own alpha (`#rrggbbaa`, `#rgba`, `rgba(…)`, `hsla(…)`).
- A `path`, `rect`, `circle`, `ellipse`, `polygon`, `polyline`, `text` or `use` with no `fill` written gets
the chosen fill added. A `line` does not. A stroke is never added: a rule colours a stroke only where a
`stroke` with a plain colour is written on that element itself (not only on its group).
- So, to be safe: write `fill="#rrggbb"` (and `stroke="#rrggbb"` where there is an outline) on every element
that a rule should colour. These written colours are also what other SVG viewers show.
- A `stop-color` or `color` written on a covered element is replaced too (by the fill colour, else by the
stroke colour). A gradient with a rule in its own id has its stops recoloured.
- Theme rules are not applied to an SVG with more than 50,000 tags; it is drawn as written.
- Do not colour the same element both ways. When an element with a `class` has a rule — its own or its
group's — the app writes the rule's colour into the element's `style` attribute, which beats the sheet
(unless the sheet says `!important`): a group's rule so overrides the sheet colours of the classed shapes
inside it. On an element without a `class` the sheet wins wherever one of its selectors reaches it.
### 6.3 Other ways the app reads (do not use unless asked)
- A `<desc>` directly inside an element, beginning with `Intuition Check`, then one rule per line as
`limits: colour` (e.g. `dark stroke: text`, `light: #1e88e5`); a first-line form `Intuition Check: text`.
- Inkscape swatches (a one-colour gradient whose label or id holds rules).
### 6.4 If the user wants to edit the file in Inkscape later
Inkscape keeps both ways, in Inkscape SVG and in Plain SVG.
- A style sheet (6.1): Inkscape keeps the `<style>` element with the `var()` inside it. Write `var()` only
there, never in a `style` attribute (Inkscape removes such an attribute when the element is edited), and add
`!important` to every colour in the sheet (Inkscape writes colours into the element's `style` attribute,
which otherwise wins).
- Ids (6.2): Inkscape keeps ids. Labels are lost in Plain SVG.
## 7. Checklist — run before answering
For a set:
1. The answer is one code block holding one JSON object; it parses as strict JSON.
2. `"intuitionCheckSet": 1` is present; `name` is not empty.
3. `images` has 2 to 200 entries: exactly the number of pictures the user asked for, plus the cover if
there is one.
4. Every image has a non-empty `name` and an `svg` string.
5. In every `svg` string each `"` is written `\"`, and there is no raw line break.
6. Language codes are from section 3, spelled exactly. In a multilingual set every image and the set have
the same languages.
7. Captions follow section 4: none by default; one language only if asked, with `lang` on the `<text>`
two named languages: two lines, both shown, each with `lang`; three or more, or all, only if the user
named them or asked for all. Then: the default caption has `lang`; the codes in the hiding rule = the
codes in the showing rule = the codes on the captions, each on exactly one `<text>`; the same style sheet
in every picture but the cover; every image has `nameTranslations` with the same languages and words.
8. A cover only if asked: one picture with `"cover": true`, last, plus at least 2 other pictures.
9. The answer is whole: the JSON ends with its `}`, and no picture was shortened or left for later.
10. Beside the code block: the sentence on how to use it, and what you assumed (section 1).
For every SVG (in a set or alone):
11. Starts with `<svg`, has `xmlns="http://www.w3.org/2000/svg"` and `viewBox="0 0 W H"` in double quotes,
ends with `</svg>`.
12. Well-formed: all elements closed, `&` `<` `>` escaped in text.
13. None of: `script`, `foreignObject`, `a`, `style` with `@import`, `on…` attributes, `href` to anything
but `#id` or `data:image/…`, external fonts, HTML elements, nested `svg`, animation.
14. Far under 10,000,000 bytes.
15. The subject is large, simple, high-contrast; the picture differs clearly from every other picture of the
set; it is visible on a light and on a dark background; no caption crosses the drawing.
16. Theme rules only if asked; without them no id starts with `ic-` and the style sheet has no `.ic-` class
and no `--ic-` variable. With them: one method in the picture, the same in every picture of the set.
Style sheet: `<style>` itself holds a `--ic-` variable or one of the six classes (a `var()` only in a
`fill` attribute does nothing); the variable names are the five of section 6; every `var()` has a second
value. Ids: every word after `ic-` is a rule word; the element has its `fill` (and `stroke`) written.
Every fixed colour left on a themed plate was checked against the light and the dark values.
17. Ids are unique within the SVG.
## 8. Complete examples
### 8a. Minimal set, no captions
```json
{
"intuitionCheckSet": 1,
"name": "Shapes",
"images": [
{ "name": "Circle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"50\" r=\"30\" fill=\"#e53935\"/></svg>" },
{ "name": "Triangle", "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 18 L84 78 L16 78 Z\" fill=\"#1565c0\"/></svg>" }
]
}
```
### 8b. One picture with a caption in every language (section 4, option 4)
A star in a gold medallion with its caption in all 53 languages, built like the app's Zodiac set: the
"Theme" block turns the gold to bronze in light versions (section 6.1), the "Language" block picks the
caption, the "Lettering" block gives each script its font. Languages with the same word share a caption;
es-419 and fr-CA follow es and fr; a page with no language, or one not listed, shows the default caption,
"STAR" (the user's language is English here). The "Theme" block is not part of option 4: this medallion has
no plate, and its gold has to darken on a light background. Without a request for theme colours leave that
block out and draw an opaque plate (section 5, rule 8), as 8f does.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme. The app gives the root the classes ic-light or ic-dark (and ic-<theme>).
The gold is drawn for a dark background; on a light one it turns bronze. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
.ic-light .shadow-glyph { stroke-opacity: 0.27 }
/* Language. Every caption is in the file once; its class names the languages that
show it. The page's language (html lang) picks the caption; without a language,
or with one not listed here, the default one. fr-CA follows fr, es-419 follows es. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, bg, bn, ca, cs, da, de, el, es, fi, fr, gu, he, hi, hr, hu, id, it, ja, kk,
kn, ko, lt, ml, mr, ms, nb, nl, or, pa, pl, pt-BR, pt-PT, ro, ru, sk, sl, sv, ta,
te, th, tr, uk, ur, vi, zh-Hans, zh-Hant) .default { display: none }
:lang(ar) .ar, :lang(bg) .bg, :lang(bn) .bn, :lang(ca) .ca, :lang(cs) .cs, :lang(da) .da,
:lang(de) .de, :lang(el) .el, :lang(es) .es, :lang(fi) .fi, :lang(fr) .fr, :lang(gu) .gu,
:lang(he) .he, :lang(hi) .hi, :lang(hr) .hr, :lang(hu) .hu, :lang(id) .id, :lang(it) .it,
:lang(ja) .ja, :lang(kk) .kk, :lang(kn) .kn, :lang(ko) .ko, :lang(lt) .lt, :lang(ml) .ml,
:lang(mr) .mr, :lang(ms) .ms, :lang(nb) .nb, :lang(nl) .nl, :lang(or) .or, :lang(pa) .pa,
:lang(pl) .pl, :lang(pt-BR) .pt-BR, :lang(pt-PT) .pt-PT, :lang(ro) .ro, :lang(ru) .ru,
:lang(sk) .sk, :lang(sl) .sl, :lang(sv) .sv, :lang(ta) .ta, :lang(te) .te, :lang(th) .th,
:lang(tr) .tr, :lang(uk) .uk, :lang(ur) .ur, :lang(vi) .vi, :lang(zh-Hans) .zh-Hans,
:lang(zh-Hant) .zh-Hant
{ display: inline }
/* Lettering. A script whose letters join or stack gets no letter-spacing; every script
outside Latin, Cyrillic and Greek gets its own font. Telugu at 500: iOS has Kohinoor
Telugu only up to Medium, and WebKit would fake a 600 from it. */
.ar, .ur, .he, .bn, .gu, .hi, .mr, .kn, .ml, .or, .pa, .ta, .te, .th { letter-spacing: 0 }
.ar, .ur { font-family: system-ui, -apple-system, Geeza Pro, sans-serif }
.he { font-family: system-ui, -apple-system, Arial Hebrew, sans-serif }
.bn { font-family: Kohinoor Bangla, Bangla Sangam MN, sans-serif }
.gu { font-family: Kohinoor Gujarati, Gujarati Sangam MN, sans-serif }
.hi, .mr { font-family: Kohinoor Devanagari, Devanagari Sangam MN, sans-serif }
.kn { font-family: Noto Sans Kannada, Kannada Sangam MN, sans-serif }
.ml { font-family: Malayalam Sangam MN, Malayalam MN, sans-serif }
.or { font-family: Noto Sans Oriya, Oriya Sangam MN, sans-serif }
.pa { font-family: Mukta Mahee, Gurmukhi Sangam MN, sans-serif }
.ta { font-family: Tamil Sangam MN, InaiMathi, Tamil MN, sans-serif }
.te { font-family: Kohinoor Telugu, Telugu Sangam MN, sans-serif }
.th { font-family: Thonburi, Noto Sans Thai, sans-serif }
.ja { font-family: Hiragino Sans, Hiragino Kaku Gothic ProN, sans-serif }
.ko { font-family: Apple SD Gothic Neo, Noto Sans KR, sans-serif }
.zh-Hans { font-family: PingFang SC, Heiti SC, sans-serif }
.zh-Hant { font-family: PingFang TC, Heiti TC, sans-serif }
.te { font-weight: 500 }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The captions. Drawn twice at the end of the file: the shadow, then the gold. A long
word would carry its own smaller font-size and letter-spacing. Urdu says lang="ur" and is
drawn in Nastaliq. zh-Hans and zh-Hant keep two captions
with the same word: each takes its own font. -->
<g id="caption" class="caption" text-anchor="middle" font-family="Helvetica Neue, Helvetica, -apple-system, sans-serif" font-weight="600" font-size="52" letter-spacing="6.8">
<text class="default" x="259.4" y="466">STAR</text>
<text class="ar" x="259.4" y="466">نجمة</text>
<text class="bg ru" x="259.4" y="466">ЗВЕЗДА</text>
<text class="bn" x="259.4" y="466">তারা</text>
<text class="ca es" x="259.4" y="466">ESTRELLA</text>
<text class="cs" x="259.4" y="466">HVĚZDA</text>
<text class="da nb" x="259.4" y="466">STJERNE</text>
<text class="de" x="259.4" y="466">STERN</text>
<text class="el" x="259.4" y="466">ΑΣΤΕΡΙ</text>
<text class="fi" x="259.4" y="466">TÄHTI</text>
<text class="fr" x="259.4" y="466">ÉTOILE</text>
<text class="gu" x="259.4" y="466">તારો</text>
<text class="he" x="259.4" y="466">כוכב</text>
<text class="hi mr" x="259.4" y="466">तारा</text>
<text class="hr" x="259.4" y="466">ZVIJEZDA</text>
<text class="hu" x="259.4" y="466">CSILLAG</text>
<text class="id ms" x="259.4" y="466">BINTANG</text>
<text class="it" x="259.4" y="466">STELLA</text>
<text class="ja" x="259.4" y="466">星</text>
<text class="kk" x="259.4" y="466">ЖҰЛДЫЗ</text>
<text class="kn" x="259.4" y="466">ನಕ್ಷತ್ರ</text>
<text class="ko" x="259.4" y="466">별</text>
<text class="lt" x="259.4" y="466">ŽVAIGŽDĖ</text>
<text class="ml" x="259.4" y="466">നക്ഷത്രം</text>
<text class="nl" x="259.4" y="466">STER</text>
<text class="or" x="259.4" y="466">ତାରା</text>
<text class="pa" x="259.4" y="466">ਤਾਰਾ</text>
<text class="pl" x="259.4" y="466">GWIAZDA</text>
<text class="pt-BR pt-PT" x="259.4" y="466">ESTRELA</text>
<text class="ro" x="259.4" y="466">STEA</text>
<text class="sk" x="259.4" y="466">HVIEZDA</text>
<text class="sl" x="259.4" y="466">ZVEZDA</text>
<text class="sv" x="259.4" y="466">STJÄRNA</text>
<text class="ta" x="259.4" y="466">நட்சத்திரம்</text>
<text class="te" x="259.4" y="466">నక్షత్రం</text>
<text class="th" x="259.4" y="466">ดาว</text>
<text class="tr" x="259.4" y="466">YILDIZ</text>
<text class="uk" x="259.4" y="466">ЗІРКА</text>
<text class="ur" lang="ur" x="259.4" y="466">ستارہ</text>
<text class="vi" x="259.4" y="466">NGÔI SAO</text>
<text class="zh-Hans" x="259.4" y="466">星星</text>
<text class="zh-Hant" x="259.4" y="466">星星</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<path class="shadow-glyph" d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#0E0D22" stroke-width="19" stroke-linejoin="round" opacity="0.45" transform="translate(3,5)"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="url(#gold)" stroke-width="19" stroke-linejoin="round"/>
<path d="M256 112L279.5 179.6L351.1 181.1L294 224.4L314.8 292.9L256 252L197.2 292.9L218 224.4L160.9 181.1L232.5 179.6Z" fill="none" stroke="#FFF6DA" stroke-width="4.5" stroke-linejoin="round" opacity="0.4" transform="translate(-2,-3)"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
<use href="#caption" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(2,4)"/>
<use href="#caption" class="gold-text" fill="#CA9E41"/>
</svg>
```
In a set this SVG is the image's `svg` string (on one line, `"` written `\"`). The image's `name` and
`nameTranslations` carry the same words as the captions, in ordinary case ("Star", "Звезда", "Étoile", …).
Every picture of the set lists the same languages.
### 8c. The cover of the set in 8b
The same medallion with a question mark instead of the subject (section 2, "The cover"); in a set it gets
`"cover": true`. Two marks: `?`, and `؟` for Arabic and Urdu. A cover may show anything else the user asks
for; this one is what to draw when the user does not say.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 512 512">
<style>
/* Theme: the same rules as every picture of the set. */
.ic-light .gold-top { stop-color: #A47A2A }
.ic-light .gold-bottom { stop-color: #6A4A14 }
.ic-light .gold-text { fill: #7A5A1E }
.ic-light .shadow-text { opacity: 0.12 }
/* Language. Two marks: "?" for every language, the Arabic question mark for Arabic and Urdu. */
.caption text { display: none }
.caption .default { display: inline }
:lang(ar, ur) .default { display: none }
:lang(ar) .ar, :lang(ur) .ur
{ display: inline }
</style>
<defs>
<linearGradient id="gold" gradientUnits="userSpaceOnUse" x1="120" y1="90" x2="400" y2="420">
<stop class="gold-top" offset="0" stop-color="#FBE9AE"/>
<stop class="gold-bottom" offset="1" stop-color="#C08F2C"/>
</linearGradient>
<!-- The question mark, where the other pictures have their subject. Drawn twice below: the
shadow, then the gold. The marks differ in shape (Arabic ؟ in Naskh, Urdu ؟ in Nastaliq), so
each has its own size and place: the same ink box as "?". -->
<g id="mark" class="caption" text-anchor="middle" font-family="system-ui, -apple-system, sans-serif" font-weight="bold">
<text class="default" x="258" y="323.8" font-size="323">?</text>
<text class="ar" lang="ar" x="254.2" y="329.6" font-size="294.1">؟</text>
<text class="ur" lang="ur" x="258.4" y="325.6" font-size="317.3">؟</text>
</g>
</defs>
<circle cx="256" cy="210" r="148" fill="none" stroke="url(#gold)" stroke-width="6" opacity="0.85"/>
<circle cx="256" cy="210" r="136" fill="none" stroke="url(#gold)" stroke-width="2" opacity="0.5"/>
<use href="#mark" class="shadow-text" fill="#0E0D22" opacity="0.45" transform="translate(3,5)"/>
<use href="#mark" class="gold-text" fill="#E2C378"/>
<g fill="none" stroke="url(#gold)" stroke-width="3" opacity="0.55" stroke-linecap="round">
<path d="M150 396h68M294 396h68"/>
</g>
<path d="M256 390 262 396 256 402 250 396Z" fill="url(#gold)" opacity="0.75"/>
</svg>
```
### 8d. One SVG picture with theme colours (style sheet)
The plate takes the theme's surface colour, the moon the accent colour, soft in dark versions; the second
values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<style>
.plate { fill: var(--ic-surface, #dddddd) }
.moon { fill: var(--ic-accent, #e53935) }
.ic-dark .moon { fill: var(--ic-soft, #e53935) }
.cut { fill: var(--ic-surface, #dddddd) }
</style>
<rect class="plate" width="100" height="100" rx="12"/>
<circle class="moon" cx="46" cy="48" r="28"/>
<circle class="cut" cx="59" cy="39" r="23"/>
</svg>
```
### 8e. One SVG picture with theme colours (ids)
The plate takes the theme's surface colour, the house the text colour, the door the accent colour; the sun is
accent in light versions and soft in dark versions. The written `fill` values are what other viewers show.
```svg
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 100 100">
<rect id="ic-surface" width="100" height="100" rx="12" fill="#eeeeee"/>
<g id="ic-text">
<path d="M16 52 L50 22 L84 52 Z" fill="#333333"/>
<rect x="26" y="52" width="48" height="30" fill="#333333"/>
</g>
<rect id="ic-accent" x="44" y="60" width="12" height="22" fill="#e53935"/>
<circle id="ic-light-accent-dark-soft" cx="82" cy="18" r="8" fill="#f9a825"/>
</svg>
```
### 8f. A small set with captions in three languages, and a cover
The user writes in English and asks for captions in English, German and Russian, and for a cover. The
default caption is the English word, so `en` is in no rule. Ordinary case, `sans-serif`, no letter-spacing;
the long Russian word has its own smaller size. Both pictures to guess have the same style sheet. The
cover's mark follows the app language, whatever the languages of the captions: `؟` in Arabic and Urdu, `?`
in every other. No theme rules: every picture has an opaque plate.
```json
{
"intuitionCheckSet": 1,
"name": "Simple shapes",
"nameTranslations": {"de": "Einfache Formen", "ru": "Простые фигуры"},
"images": [
{ "name": "Circle", "nameTranslations": {"de": "Kreis", "ru": "Круг"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#fff4d6\"/><circle cx=\"50\" cy=\"42\" r=\"28\" fill=\"#e53935\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Circle</text><text class=\"de\" x=\"50\" y=\"91\">Kreis</text><text class=\"ru\" x=\"50\" y=\"91\">Круг</text></g></svg>" },
{ "name": "Triangle", "nameTranslations": {"de": "Dreieck", "ru": "Треугольник"}, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(de,ru) .default{display:none}:lang(de) .de,:lang(ru) .ru{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#e3f2fd\"/><path d=\"M50 12 L82 70 L18 70 Z\" fill=\"#1565c0\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"sans-serif\" font-weight=\"600\" font-size=\"12\" fill=\"#222222\"><text class=\"default\" x=\"50\" y=\"91\">Triangle</text><text class=\"de\" x=\"50\" y=\"91\">Dreieck</text><text class=\"ru\" x=\"50\" y=\"91\" font-size=\"10.5\">Треугольник</text></g></svg>" },
{ "name": "Question mark", "nameTranslations": {"de": "Fragezeichen", "ru": "Знак вопроса"}, "cover": true, "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" viewBox=\"0 0 100 100\"><style>.caption text{display:none}.caption .default{display:inline}:lang(ar,ur) .default{display:none}:lang(ar) .ar,:lang(ur) .ur{display:inline}</style><rect width=\"100\" height=\"100\" rx=\"12\" fill=\"#eeeeee\"/><g class=\"caption\" text-anchor=\"middle\" font-family=\"system-ui, -apple-system, sans-serif\" font-weight=\"bold\" fill=\"#555555\"><text class=\"default\" x=\"50.4\" y=\"72.4\" font-size=\"64\">?</text><text class=\"ar\" lang=\"ar\" x=\"49.6\" y=\"73.7\" font-size=\"58\">؟</text><text class=\"ur\" lang=\"ur\" x=\"50.5\" y=\"72.8\" font-size=\"62.9\">؟</text></g></svg>" }
]
}
```
Inhoud
Korte uitleg over de belangrijkste dingen die je in Intuition Check kunt doen, en hoe je ons bereikt.
- Intuïtie
- Hoe de app werkt
- Sets
- Sets versturen
- Partnerspel
- Statistieken
- Je resultaten lezen
- Je toestand
- Weergave en functies
- Gratis uur en abonnement
- Je gegevens
- Je eigen sets gemaakt met AI
- Versiegeschiedenis
- Privacybeleid
Als iets niet werkt
Schrijf ons via [email protected], dan krijg je antwoord. Het snelst gaat het via Instellingen → Info → Neem contact op met support: dan wordt er in je e-mailapp een concept geopend waarin de versie en het buildnummer van de app, het model van je apparaat en je iOS-versie al zijn ingevuld.
Er is geen supportformulier en geen ticketsysteem. De app verzamelt niets, dus alles wat we moeten weten, moet van jou komen.
Wat je in je bericht zet
- Wat je deed, wat je verwachtte en wat er in plaats daarvan gebeurde.
- De appversie, te vinden in Instellingen → Info → Versie.
- Het model van je apparaat en je iOS-versie.
Een concept dat je via ‘Neem contact op met support’ maakt, bevat de versie, het model en de iOS-versie al.
Problemen oplossen
- De twee apparaten vinden elkaar niet: Als de apparaten elkaar niet vinden.
- De statistieken zijn weg nadat de app opnieuw is geopend: Je statistieken bewaren.
- Er verschijnt niets in de statistieken: Wat er wordt vastgelegd.
- Er ontbreekt een set in de kiezer: De setkiezer.
Bronnen
- Kahneman, D., & Klein, G. (2009). American Psychologist, 64(6), 515–526. Conditions for intuitive expertise: A failure to disagree [Voorwaarden voor intuïtieve expertise: een meningsverschil dat uitbleef]
Een gezamenlijk overzichtsartikel van twee vooraanstaande onderzoekers van intuïtie uit tegengestelde stromingen, in het tijdschrift van de American Psychological Association.
https://doi.org/10.1037/a0016755 - Cardeña, E. (2018). American Psychologist, 73(5), 663–677. The experimental evidence for parapsychological phenomena: A review [Het experimentele bewijs voor parapsychologische verschijnselen: een overzicht]
Een overzicht van veel onderzoeken door een psycholoog die het bewijs sterk vindt, in het tijdschrift van de American Psychological Association.
https://doi.org/10.1037/amp0000236 - Reber, A. S., & Alcock, J. E. (2020). American Psychologist, 75(3), 391–399. Searching for the impossible: Parapsychology's elusive quest [Op zoek naar het onmogelijke: het ongrijpbare doel van de parapsychologie]
De reactie op het overzicht hierboven, door twee psychologen die zulke effecten afwijzen, in hetzelfde tijdschrift.
https://doi.org/10.1037/amp0000486 - Sheldrake, R. (2000). Journal of the Society for Psychical Research, 64, 224–232. Telepathic telephone calls: Two surveys [Telepathische telefoontjes: twee enquêtes]
Telefonische enquêtes onder willekeurig gekozen huishoudens in Londen en Bury (Engeland), door een onderzoeker die meent dat telepathie bestaat, in een tijdschrift voor parapsychologie.
https://www.sheldrake.org/files/pdfs/papers/Telepathic-Telephone-Calls-Two-Surveys.pdf - Brown, D. J., & Sheldrake, R. (2001). Journal of Parapsychology, 65, 145–156. The anticipation of telephone calls: A survey in California [Het voorvoelen van telefoontjes: een enquête in Californië]
Een telefonische enquête onder 200 willekeurig gekozen mensen, door dezelfde onderzoeker en een medeauteur, in een tijdschrift voor parapsychologie.
https://www.sheldrake.org/files/pdfs/papers/The-Anticipation-of-Telephone-Calls-A-Survey-in-California.pdf - Cottrell, J. E., Winer, G. A., & Smith, M. C. (1996). Developmental Psychology, 32(1), 50–61. Beliefs of children and adults about feeling stares of unseen others [Opvattingen van kinderen en volwassenen over het voelen van starende blikken van anderen die je niet ziet]
Drie onderzoeken met kinderen en volwassenen, in een tijdschrift van de American Psychological Association.
https://doi.org/10.1037/0012-1649.32.1.50 - Born, J., Hansen, K., Marshall, L., Mölle, M., & Fehm, H. L. (1999). Nature, 397, 29–30. Timing the end of nocturnal sleep [Het einde van de nachtelijke slaap timen]
Een experiment met 15 vrijwilligers, in het tijdschrift Nature.
https://doi.org/10.1038/16166 - Sio, U. N., & Ormerod, T. C. (2009). Psychological Bulletin, 135(1), 94–120. Does incubation enhance problem solving? A meta-analytic review [Helpt incubatie bij het oplossen van problemen? Een meta-analytisch overzicht]
Een overzicht dat de resultaten van veel experimenten combineert, in een tijdschrift van de American Psychological Association.
https://doi.org/10.1037/a0014212 - Wagner, U., Gais, S., Haider, H., Verleger, R., & Born, J. (2004). Nature, 427, 352–355. Sleep inspires insight [Slaap inspireert tot inzicht]
Een experiment in het tijdschrift Nature; latere herhalingen ervan leverden wisselende resultaten op.
https://doi.org/10.1038/nature02223 - Ambady, N., & Rosenthal, R. (1993). Journal of Personality and Social Psychology, 64(3), 431–441. Half a minute: Predicting teacher evaluations from thin slices of nonverbal behavior and physical attractiveness [Een halve minuut: beoordelingen van docenten voorspellen op basis van korte fragmenten van non-verbaal gedrag en fysieke aantrekkelijkheid]
Drie onderzoeken – het belangrijkste met 13 docenten – in een tijdschrift van de American Psychological Association.
https://doi.org/10.1037/0022-3514.64.3.431 - Diaconis, P., & Mosteller, F. (1989). Journal of the American Statistical Association, 84(408), 853–861. Methods for studying coincidences [Methoden om toevalligheden te bestuderen]
Een artikel van twee statistici over hoe toevalligheden ontstaan, in het tijdschrift van de American Statistical Association.
https://doi.org/10.1080/01621459.1989.10478847 - Wilson, T. D., Lisle, D. J., Schooler, J. W., Hodges, S. D., Klaaren, K. J., & LaFleur, S. J. (1993). Personality and Social Psychology Bulletin, 19(3), 331–339. Introspecting about reasons can reduce post-choice satisfaction [Introspectie over redenen kan de tevredenheid na een keuze verminderen]
Een experiment, in een tijdschrift voor sociale psychologie.
https://doi.org/10.1177/0146167293193010 - Dunn, B. D., Galton, H. C., Morgan, R., Evans, D., Oliver, C., Meyer, M., Cusack, R., Lawrence, A. D., & Dalgleish, T. (2010). Psychological Science, 21(12), 1835–1844. Listening to your heart: How interoception shapes emotion experience and intuitive decision making [Luisteren naar je hart: hoe interoceptie de beleving van emoties en intuïtieve besluitvorming vormgeeft]
Twee experimenten, in een tijdschrift van de Association for Psychological Science.
https://doi.org/10.1177/0956797610389191
Beeldverantwoording
Illustraties van speelkaarten: Adrian Kennard, vrijgegeven onder CC0 Public Domain. Generator en broncode op me.uk/cards.